| /* |
| * (C) Copyright 2015 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <usb.h> |
| #include <dm/device-internal.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* We only support up to 8 */ |
| #define SANDBOX_NUM_PORTS 4 |
| |
| struct sandbox_hub_platdata { |
| struct usb_dev_platdata plat; |
| int port; /* Port number (numbered from 0) */ |
| }; |
| |
| enum { |
| STRING_MANUFACTURER = 1, |
| STRING_PRODUCT, |
| STRING_SERIAL, |
| |
| STRING_count, |
| }; |
| |
| static struct usb_string hub_strings[] = { |
| {STRING_MANUFACTURER, "sandbox"}, |
| {STRING_PRODUCT, "hub"}, |
| {STRING_SERIAL, "2345"}, |
| {}, |
| }; |
| |
| static struct usb_device_descriptor hub_device_desc = { |
| .bLength = sizeof(hub_device_desc), |
| .bDescriptorType = USB_DT_DEVICE, |
| |
| .bcdUSB = __constant_cpu_to_le16(0x0200), |
| |
| .bDeviceClass = USB_CLASS_HUB, |
| .bDeviceSubClass = 0, |
| .bDeviceProtocol = 0, |
| |
| .idVendor = __constant_cpu_to_le16(0x1234), |
| .idProduct = __constant_cpu_to_le16(0x5678), |
| .iManufacturer = STRING_MANUFACTURER, |
| .iProduct = STRING_PRODUCT, |
| .iSerialNumber = STRING_SERIAL, |
| .bNumConfigurations = 1, |
| }; |
| |
| static struct usb_config_descriptor hub_config1 = { |
| .bLength = sizeof(hub_config1), |
| .bDescriptorType = USB_DT_CONFIG, |
| |
| /* wTotalLength is set up by usb-emul-uclass */ |
| .bNumInterfaces = 1, |
| .bConfigurationValue = 0, |
| .iConfiguration = 0, |
| .bmAttributes = 1 << 7, |
| .bMaxPower = 50, |
| }; |
| |
| static struct usb_interface_descriptor hub_interface0 = { |
| .bLength = sizeof(hub_interface0), |
| .bDescriptorType = USB_DT_INTERFACE, |
| |
| .bInterfaceNumber = 0, |
| .bAlternateSetting = 0, |
| .bNumEndpoints = 1, |
| .bInterfaceClass = USB_CLASS_HUB, |
| .bInterfaceSubClass = 0, |
| .bInterfaceProtocol = US_PR_CB, |
| .iInterface = 0, |
| }; |
| |
| static struct usb_endpoint_descriptor hub_endpoint0_in = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| |
| .bEndpointAddress = 1 | USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = __constant_cpu_to_le16(1024), |
| .bInterval = 0, |
| }; |
| |
| static struct usb_hub_descriptor hub_desc = { |
| .bLength = sizeof(hub_desc), |
| .bDescriptorType = USB_DT_HUB, |
| .bNbrPorts = SANDBOX_NUM_PORTS, |
| .wHubCharacteristics = __constant_cpu_to_le16(1 << 0 | 1 << 3 | |
| 1 << 7), |
| .bPwrOn2PwrGood = 2, |
| .bHubContrCurrent = 5, |
| .DeviceRemovable = {0, 0xff}, /* all ports removeable */ |
| #if SANDBOX_NUM_PORTS > 8 |
| #error "This code sets up an incorrect mask" |
| #endif |
| }; |
| |
| static void *hub_desc_list[] = { |
| &hub_device_desc, |
| &hub_config1, |
| &hub_interface0, |
| &hub_endpoint0_in, |
| &hub_desc, |
| NULL, |
| }; |
| |
| struct sandbox_hub_priv { |
| int status[SANDBOX_NUM_PORTS]; |
| int change[SANDBOX_NUM_PORTS]; |
| }; |
| |
| static struct udevice *hub_find_device(struct udevice *hub, int port) |
| { |
| struct udevice *dev; |
| |
| for (device_find_first_child(hub, &dev); |
| dev; |
| device_find_next_child(&dev)) { |
| struct sandbox_hub_platdata *plat; |
| |
| plat = dev_get_parent_platdata(dev); |
| if (plat->port == port) |
| return dev; |
| } |
| |
| return NULL; |
| } |
| |
| static int clrset_post_state(struct udevice *hub, int port, int clear, int set) |
| { |
| struct sandbox_hub_priv *priv = dev_get_priv(hub); |
| int *status = &priv->status[port]; |
| int *change = &priv->change[port]; |
| int ret = 0; |
| |
| if ((clear | set) & USB_PORT_STAT_POWER) { |
| struct udevice *dev = hub_find_device(hub, port); |
| |
| if (dev) { |
| if (set & USB_PORT_STAT_POWER) { |
| ret = device_probe(dev); |
| debug("%s: %s: power on, probed, ret=%d\n", |
| __func__, dev->name, ret); |
| if (!ret) { |
| set |= USB_PORT_STAT_CONNECTION | |
| USB_PORT_STAT_ENABLE; |
| } |
| |
| } else if (clear & USB_PORT_STAT_POWER) { |
| debug("%s: %s: power off, removed, ret=%d\n", |
| __func__, dev->name, ret); |
| ret = device_remove(dev); |
| clear |= USB_PORT_STAT_CONNECTION; |
| } |
| } |
| } |
| *change |= *status & clear; |
| *change |= ~*status & set; |
| *change &= 0x1f; |
| *status = (*status & ~clear) | set; |
| |
| return ret; |
| } |
| |
| static int sandbox_hub_submit_control_msg(struct udevice *bus, |
| struct usb_device *udev, |
| unsigned long pipe, |
| void *buffer, int length, |
| struct devrequest *setup) |
| { |
| struct sandbox_hub_priv *priv = dev_get_priv(bus); |
| int ret = 0; |
| |
| if (pipe == usb_rcvctrlpipe(udev, 0)) { |
| switch (setup->requesttype) { |
| case USB_RT_HUB | USB_DIR_IN: |
| switch (setup->request) { |
| case USB_REQ_GET_STATUS: { |
| struct usb_hub_status *hubsts = buffer; |
| |
| hubsts->wHubStatus = 0; |
| hubsts->wHubChange = 0; |
| udev->status = 0; |
| udev->act_len = sizeof(*hubsts); |
| return 0; |
| } |
| default: |
| debug("%s: rx ctl requesttype=%x, request=%x\n", |
| __func__, setup->requesttype, |
| setup->request); |
| break; |
| } |
| case USB_RT_PORT | USB_DIR_IN: |
| switch (setup->request) { |
| case USB_REQ_GET_STATUS: { |
| struct usb_port_status *portsts = buffer; |
| int port; |
| |
| port = (setup->index & USB_HUB_PORT_MASK) - 1; |
| portsts->wPortStatus = priv->status[port]; |
| portsts->wPortChange = priv->change[port]; |
| udev->status = 0; |
| udev->act_len = sizeof(*portsts); |
| return 0; |
| } |
| } |
| default: |
| debug("%s: rx ctl requesttype=%x, request=%x\n", |
| __func__, setup->requesttype, setup->request); |
| break; |
| } |
| } else if (pipe == usb_sndctrlpipe(udev, 0)) { |
| switch (setup->requesttype) { |
| case USB_RT_PORT: |
| switch (setup->request) { |
| case USB_REQ_SET_FEATURE: { |
| int port; |
| |
| port = (setup->index & USB_HUB_PORT_MASK) - 1; |
| debug("set feature port=%x, feature=%x\n", |
| port, setup->value); |
| if (setup->value < USB_PORT_FEAT_C_CONNECTION) { |
| ret = clrset_post_state(bus, port, 0, |
| 1 << setup->value); |
| } else { |
| debug(" ** Invalid feature\n"); |
| } |
| return ret; |
| } |
| case USB_REQ_CLEAR_FEATURE: { |
| int port; |
| |
| port = (setup->index & USB_HUB_PORT_MASK) - 1; |
| debug("clear feature port=%x, feature=%x\n", |
| port, setup->value); |
| if (setup->value < USB_PORT_FEAT_C_CONNECTION) { |
| ret = clrset_post_state(bus, port, |
| 1 << setup->value, 0); |
| } else { |
| priv->change[port] &= 1 << |
| (setup->value - 16); |
| } |
| udev->status = 0; |
| return 0; |
| } |
| default: |
| debug("%s: tx ctl requesttype=%x, request=%x\n", |
| __func__, setup->requesttype, |
| setup->request); |
| break; |
| } |
| default: |
| debug("%s: tx ctl requesttype=%x, request=%x\n", |
| __func__, setup->requesttype, setup->request); |
| break; |
| } |
| } |
| debug("pipe=%lx\n", pipe); |
| |
| return -EIO; |
| } |
| |
| static int sandbox_hub_bind(struct udevice *dev) |
| { |
| return usb_emul_setup_device(dev, PACKET_SIZE_64, hub_strings, |
| hub_desc_list); |
| } |
| |
| static int sandbox_child_post_bind(struct udevice *dev) |
| { |
| struct sandbox_hub_platdata *plat = dev_get_parent_platdata(dev); |
| |
| plat->port = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1); |
| |
| return 0; |
| } |
| |
| static const struct dm_usb_ops sandbox_usb_hub_ops = { |
| .control = sandbox_hub_submit_control_msg, |
| }; |
| |
| static const struct udevice_id sandbox_usb_hub_ids[] = { |
| { .compatible = "sandbox,usb-hub" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_sandbox_hub) = { |
| .name = "usb_sandbox_hub", |
| .id = UCLASS_USB_EMUL, |
| .of_match = sandbox_usb_hub_ids, |
| .bind = sandbox_hub_bind, |
| .ops = &sandbox_usb_hub_ops, |
| .priv_auto_alloc_size = sizeof(struct sandbox_hub_priv), |
| .per_child_platdata_auto_alloc_size = |
| sizeof(struct sandbox_hub_platdata), |
| .child_post_bind = sandbox_child_post_bind, |
| }; |