| .. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| .. sectionauthor:: Vignesh Raghavendra <vigneshr@ti.com> |
| |
| Texas Instruments AM62 Platforms |
| ================================ |
| |
| Introduction: |
| ------------- |
| The AM62 SoC family is the follow on AM335x built on the K3 Multicore |
| SoC architecture platform, providing ultra-low-power modes, dual |
| display, multi-sensor edge compute, security and other BOM-saving |
| integrations. The AM62 SoC targets a broad market to enable |
| applications such as Industrial HMI, PLC/CNC/Robot control, Medical |
| Equipment, Building Automation, Appliances and more. |
| |
| Some highlights of this SoC are: |
| |
| * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. |
| Pin-to-pin compatible options for single and quad core are available. |
| * Cortex-M4F for general-purpose or safety usage. |
| * Dual display support, providing 24-bit RBG parallel interface and |
| OLDI/LVDS-4 Lane x2, up to 200MHz pixel clock support for 2K display |
| resolution. |
| * Selectable GPU support, up to 8GFLOPS, providing better user experience |
| in 3D graphic display case and Android. |
| * PRU(Programmable Realtime Unit) support for customized programmable |
| interfaces/IOs. |
| * Integrated Giga-bit Ethernet switch supporting up to a total of two |
| external ports (TSN capable). |
| * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for |
| NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio, |
| 1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals. |
| * Dedicated Centralized System Controller for Security, Power, and |
| Resource Management. |
| * Multiple low power modes support, ex: Deep sleep, Standby, MCU-only, |
| enabling battery powered system design. |
| |
| More details can be found in the Technical Reference Manual: |
| https://www.ti.com/lit/pdf/spruiv7 |
| |
| Boot Flow: |
| ---------- |
| Below is the pictorial representation of boot flow: |
| |
| .. code-block:: text |
| |
| +------------------------------------------------------------------------+ |
| | TIFS | Main R5 | A53 | |
| +------------------------------------------------------------------------+ |
| | +--------+ | | | |
| | | Reset | | | | |
| | +--------+ | | | |
| | : | | | |
| | +--------+ | +-----------+ | | |
| | | *ROM* |----------|-->| Reset rls | | | |
| | +--------+ | +-----------+ | | |
| | | | | : | | |
| | | ROM | | : | | |
| | |services| | : | | |
| | | | | +-------------+ | | |
| | | | | | *R5 ROM* | | | |
| | | | | +-------------+ | | |
| | | |<---------|---|Load and auth| | | |
| | | | | | tiboot3.bin | | | |
| | +--------+ | +-------------+ | | |
| | | |<---------|---| Load sysfw | | | |
| | | | | | part to TIFS| | | |
| | | | | | core | | | |
| | | | | +-------------+ | | |
| | | | | : | | |
| | | | | : | | |
| | | | | : | | |
| | | | | +-------------+ | | |
| | | | | | *R5 SPL* | | | |
| | | | | +-------------+ | | |
| | | | | | DDR | | | |
| | | | | | config | | | |
| | | | | +-------------+ | | |
| | | | | | Load | | | |
| | | | | | tispl.bin | | | |
| | | | | +-------------+ | | |
| | | | | | Load R5 | | | |
| | | | | | firmware | | | |
| | | | | +-------------+ | | |
| | | |<---------|---| Start A53 | | | |
| | | | | | and jump to | | | |
| | | | | | DM fw image | | | |
| | | | | +-------------+ | | |
| | | | | | +-----------+ | |
| | | |----------|-----------------------|---->| Reset rls | | |
| | | | | | +-----------+ | |
| | | TIFS | | | : | |
| | |Services| | | +-----------+ | |
| | | |<---------|-----------------------|---->|*ATF/OPTEE*| | |
| | | | | | +-----------+ | |
| | | | | | : | |
| | | | | | +-----------+ | |
| | | |<---------|-----------------------|---->| *A53 SPL* | | |
| | | | | | +-----------+ | |
| | | | | | | Load | | |
| | | | | | | u-boot.img| | |
| | | | | | +-----------+ | |
| | | | | | : | |
| | | | | | +-----------+ | |
| | | |<---------|-----------------------|---->| *U-Boot* | | |
| | | | | | +-----------+ | |
| | | | | | | prompt | | |
| | | |----------|-----------------------|-----+-----------+-----| |
| | +--------+ | | | |
| | | | | |
| +------------------------------------------------------------------------+ |
| |
| - Here TIFS acts as master and provides all the critical services. R5/A53 |
| requests TIFS to get these services done as shown in the above diagram. |
| |
| Sources: |
| -------- |
| 1. SYSFW: |
| Tree: git://git.ti.com/k3-image-gen/k3-image-gen.git |
| Branch: master |
| |
| 2. ATF: |
| Tree: https://github.com/ARM-software/arm-trusted-firmware.git |
| Branch: master |
| |
| 3. OPTEE: |
| Tree: https://github.com/OP-TEE/optee_os.git |
| Branch: master |
| |
| 4. U-Boot: |
| Tree: https://source.denx.de/u-boot/u-boot |
| Branch: master |
| |
| 5. TI Linux Firmware: |
| Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git |
| Branch: ti-linux-firmware |
| |
| Build procedure: |
| ---------------- |
| 1. ATF: |
| |
| .. code-block:: text |
| |
| $ make CROSS_COMPILE=aarch64-none-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=lite SPD=opteed |
| |
| 2. OPTEE: |
| |
| .. code-block:: text |
| |
| $ make PLATFORM=k3 CFG_ARM64_core=y CROSS_COMPILE=arm-none-linux-gnueabihf- CROSS_COMPILE64=aarch64-none-linux-gnu- |
| |
| 3. U-Boot: |
| |
| * 3.1 R5: |
| |
| .. code-block:: text |
| |
| $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- am62x_evm_r5_defconfig O=/tmp/r5 |
| $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- O=/tmp/r5 |
| $ cd <k3-image-gen> |
| $ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- SOC=am62x SBL=/tmp/r5/spl/u-boot-spl.bin SYSFW_PATH=<path to ti-linux-firmware>/ti-sysfw/ti-fs-firmware-am62x-gp.bin |
| |
| Use the tiboot3.bin generated from last command |
| |
| * 3.2 A53: |
| |
| .. code-block:: text |
| |
| $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- am62x_evm_a53_defconfig O=/tmp/a53 |
| $ make ARCH=arm CROSS_COMPILE=aarch64-none-linux-gnu- ATF=<path to ATF dir>/build/k3/lite/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to ti-linux-firmware>/ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f O=/tmp/a53 |
| |
| Target Images |
| -------------- |
| Copy the below images to an SD card and boot: |
| - tiboot3.bin from step 3.1 |
| - tispl.bin, u-boot.img from 3.2 |
| |
| Image formats: |
| -------------- |
| |
| - tiboot3.bin: |
| |
| .. code-block:: text |
| |
| +-----------------------+ |
| | X.509 | |
| | Certificate | |
| | +-------------------+ | |
| | | | | |
| | | R5 | | |
| | | u-boot-spl.bin | | |
| | | | | |
| | +-------------------+ | |
| | | | | |
| | |TIFS with board cfg| | |
| | | | | |
| | +-------------------+ | |
| | | | | |
| | | | | |
| | | FIT header | | |
| | | +---------------+ | | |
| | | | | | | |
| | | | DTB 1...N | | | |
| | | +---------------+ | | |
| | +-------------------+ | |
| +-----------------------+ |
| |
| - tispl.bin |
| |
| .. code-block:: text |
| |
| +-----------------------+ |
| | | |
| | FIT HEADER | |
| | +-------------------+ | |
| | | | | |
| | | A53 ATF | | |
| | +-------------------+ | |
| | | | | |
| | | A53 OPTEE | | |
| | +-------------------+ | |
| | | | | |
| | | R5 DM FW | | |
| | +-------------------+ | |
| | | | | |
| | | A53 SPL | | |
| | +-------------------+ | |
| | | | | |
| | | SPL DTB 1...N | | |
| | +-------------------+ | |
| +-----------------------+ |