| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 |
| * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc |
| */ |
| |
| /* Chrontel CH7301C DVI Transmitter */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <errno.h> |
| #include <i2c.h> |
| |
| #define CH7301_I2C_ADDR 0x75 |
| |
| enum { |
| CH7301_CM = 0x1c, /* Clock Mode Register */ |
| CH7301_IC = 0x1d, /* Input Clock Register */ |
| CH7301_GPIO = 0x1e, /* GPIO Control Register */ |
| CH7301_IDF = 0x1f, /* Input Data Format Register */ |
| CH7301_CD = 0x20, /* Connection Detect Register */ |
| CH7301_DC = 0x21, /* DAC Control Register */ |
| CH7301_HPD = 0x23, /* Hot Plug Detection Register */ |
| CH7301_TCTL = 0x31, /* DVI Control Input Register */ |
| CH7301_TPCP = 0x33, /* DVI PLL Charge Pump Ctrl Register */ |
| CH7301_TPD = 0x34, /* DVI PLL Divide Register */ |
| CH7301_TPVT = 0x35, /* DVI PLL Supply Control Register */ |
| CH7301_TPF = 0x36, /* DVI PLL Filter Register */ |
| CH7301_TCT = 0x37, /* DVI Clock Test Register */ |
| CH7301_TSTP = 0x48, /* Test Pattern Register */ |
| CH7301_PM = 0x49, /* Power Management register */ |
| CH7301_VID = 0x4a, /* Version ID Register */ |
| CH7301_DID = 0x4b, /* Device ID Register */ |
| CH7301_DSP = 0x56, /* DVI Sync polarity Register */ |
| }; |
| |
| int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; |
| |
| int ch7301_probe(unsigned screen, bool power) |
| { |
| u8 value; |
| |
| i2c_set_bus_num(ch7301_i2c[screen]); |
| if (i2c_probe(CH7301_I2C_ADDR)) |
| return -1; |
| |
| value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); |
| if (value != 0x17) |
| return -1; |
| |
| if (power) { |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); |
| } else { |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x00); |
| i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0x01); |
| } |
| |
| return 0; |
| } |