| /* |
| * (C) Copyright 2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * This code is based on linux driver for sl811hs chip, source at |
| * drivers/usb/host/sl811.c: |
| * |
| * SL811 Host Controller Interface driver for USB. |
| * |
| * Copyright (c) 2003/06, Courage Co., Ltd. |
| * |
| * Based on: |
| * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, |
| * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, |
| * Adam Richter, Gregory P. Smith; |
| * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com> |
| * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #ifdef CONFIG_USB_SL811HS |
| #include <mpc8xx.h> |
| #include <usb.h> |
| #include "sl811.h" |
| |
| #include "../../board/kup/common/kup.h" |
| |
| #ifdef __PPC__ |
| # define EIEIO __asm__ volatile ("eieio") |
| #else |
| # define EIEIO /* nothing */ |
| #endif |
| |
| #define SL811_ADR (0x50000000) |
| #define SL811_DAT (0x50000001) |
| |
| #define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);}) |
| |
| #ifdef SL811_DEBUG |
| static int debug = 9; |
| #endif |
| |
| static int root_hub_devnum = 0; |
| static struct usb_port_status rh_status = { 0 };/* root hub port status */ |
| |
| static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, |
| void *data, int buf_len, struct devrequest *cmd); |
| |
| static void sl811_write (__u8 index, __u8 data) |
| { |
| *(volatile unsigned char *) (SL811_ADR) = index; |
| EIEIO; |
| *(volatile unsigned char *) (SL811_DAT) = data; |
| EIEIO; |
| } |
| |
| static __u8 sl811_read (__u8 index) |
| { |
| __u8 data; |
| |
| *(volatile unsigned char *) (SL811_ADR) = index; |
| EIEIO; |
| data = *(volatile unsigned char *) (SL811_DAT); |
| EIEIO; |
| return (data); |
| } |
| |
| /* |
| * Read consecutive bytes of data from the SL811H/SL11H buffer |
| */ |
| static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size) |
| { |
| *(volatile unsigned char *) (SL811_ADR) = offset; |
| EIEIO; |
| while (size--) { |
| *buf++ = *(volatile unsigned char *) (SL811_DAT); |
| EIEIO; |
| } |
| } |
| |
| /* |
| * Write consecutive bytes of data to the SL811H/SL11H buffer |
| */ |
| static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size) |
| { |
| *(volatile unsigned char *) (SL811_ADR) = offset; |
| EIEIO; |
| while (size--) { |
| *(volatile unsigned char *) (SL811_DAT) = *buf++; |
| EIEIO; |
| } |
| } |
| |
| int usb_init_kup4x (void) |
| { |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| int i; |
| unsigned char tmp; |
| |
| memctl = &immap->im_memctl; |
| memctl->memc_or7 = 0xFFFF8726; |
| memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */ |
| /* BP 14 low = USB ON */ |
| immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC); |
| /* PB 14 nomal port */ |
| immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC); |
| /* output */ |
| immap->im_cpm.cp_pbdir |= (BP_USB_VCC); |
| |
| puts ("USB: "); |
| |
| for (i = 0x10; i < 0xff; i++) { |
| sl811_write(i, i); |
| tmp = (sl811_read(i)); |
| if (tmp != i) { |
| printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp); |
| return (-1); |
| } |
| } |
| printf ("SL811 ready\n"); |
| return (0); |
| } |
| |
| /* |
| * This function resets SL811HS controller and detects the speed of |
| * the connecting device |
| * |
| * Return: 0 = no device attached; 1 = USB device attached |
| */ |
| static int sl811_hc_reset(void) |
| { |
| int status ; |
| |
| sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); |
| sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); |
| |
| mdelay(20); |
| |
| /* Disable hardware SOF generation, clear all irq status. */ |
| sl811_write(SL811_CTRL1, 0); |
| mdelay(2); |
| sl811_write(SL811_INTRSTS, 0xff); |
| status = sl811_read(SL811_INTRSTS); |
| |
| if (status & SL811_INTR_NOTPRESENT) { |
| /* Device is not present */ |
| PDEBUG(0, "Device not present\n"); |
| rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE); |
| rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; |
| sl811_write(SL811_INTR, SL811_INTR_INSRMV); |
| return 0; |
| } |
| |
| /* Send SOF to address 0, endpoint 0. */ |
| sl811_write(SL811_LEN_B, 0); |
| sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0)); |
| sl811_write(SL811_DEV_B, 0x00); |
| sl811_write(SL811_SOFLOW, SL811_12M_LOW); |
| |
| if (status & SL811_INTR_SPEED_FULL) { |
| /* full speed device connect directly to root hub */ |
| PDEBUG (0, "Full speed Device attached\n"); |
| |
| sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); |
| mdelay(20); |
| sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); |
| sl811_write(SL811_CTRL1, SL811_CTRL1_SOF); |
| |
| /* start the SOF or EOP */ |
| sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); |
| rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION; |
| rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED; |
| mdelay(2); |
| sl811_write(SL811_INTRSTS, 0xff); |
| } else { |
| /* slow speed device connect directly to root-hub */ |
| PDEBUG(0, "Low speed Device attached\n"); |
| |
| sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); |
| mdelay(20); |
| sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI); |
| sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF); |
| |
| /* start the SOF or EOP */ |
| sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); |
| rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED; |
| mdelay(2); |
| sl811_write(SL811_INTRSTS, 0xff); |
| } |
| |
| rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; |
| sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A); |
| |
| return 1; |
| } |
| |
| int usb_lowlevel_init(void) |
| { |
| root_hub_devnum = 0; |
| sl811_hc_reset(); |
| return 0; |
| } |
| |
| int usb_lowlevel_stop(void) |
| { |
| sl811_hc_reset(); |
| return 0; |
| } |
| |
| static int calc_needed_buswidth(int bytes, int need_preamble) |
| { |
| return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048; |
| } |
| |
| static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len) |
| { |
| __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE; |
| __u16 status = 0; |
| int err = 0, time_start = get_timer(0); |
| int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && |
| usb_pipeslow(pipe); |
| |
| if (len > 239) |
| return -1; |
| |
| if (usb_pipeout(pipe)) |
| ctrl |= SL811_USB_CTRL_DIR_OUT; |
| if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) |
| ctrl |= SL811_USB_CTRL_TOGGLE_1; |
| if (need_preamble) |
| ctrl |= SL811_USB_CTRL_PREAMBLE; |
| |
| sl811_write(SL811_INTRSTS, 0xff); |
| |
| while (err < 3) { |
| sl811_write(SL811_ADDR_A, 0x10); |
| sl811_write(SL811_LEN_A, len); |
| if (usb_pipeout(pipe) && len) |
| sl811_write_buf(0x10, buffer, len); |
| |
| if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && |
| sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble)) |
| ctrl |= SL811_USB_CTRL_SOF; |
| else |
| ctrl &= ~SL811_USB_CTRL_SOF; |
| |
| sl811_write(SL811_CTRL_A, ctrl); |
| while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) { |
| if (5*CONFIG_SYS_HZ < get_timer(time_start)) { |
| printf("USB transmit timed out\n"); |
| return -USB_ST_CRC_ERR; |
| } |
| } |
| |
| sl811_write(SL811_INTRSTS, 0xff); |
| status = sl811_read(SL811_STS_A); |
| |
| if (status & SL811_USB_STS_ACK) { |
| int remainder = sl811_read(SL811_CNT_A); |
| if (remainder) { |
| PDEBUG(0, "usb transfer remainder = %d\n", remainder); |
| len -= remainder; |
| } |
| if (usb_pipein(pipe) && len) |
| sl811_read_buf(0x10, buffer, len); |
| return len; |
| } |
| |
| if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK) |
| continue; |
| |
| PDEBUG(0, "usb transfer error %#x\n", (int)status); |
| err++; |
| } |
| |
| err = 0; |
| |
| if (status & SL811_USB_STS_ERROR) |
| err |= USB_ST_BUF_ERR; |
| if (status & SL811_USB_STS_TIMEOUT) |
| err |= USB_ST_CRC_ERR; |
| if (status & SL811_USB_STS_STALL) |
| err |= USB_ST_STALLED; |
| |
| return -err; |
| } |
| |
| int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int len) |
| { |
| int dir_out = usb_pipeout(pipe); |
| int ep = usb_pipeendpoint(pipe); |
| int max = usb_maxpacket(dev, pipe); |
| int done = 0; |
| |
| PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n", |
| usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); |
| |
| dev->status = 0; |
| |
| sl811_write(SL811_DEV_A, usb_pipedevice(pipe)); |
| sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep)); |
| while (done < len) { |
| int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, |
| max > len - done ? len - done : max); |
| if (res < 0) { |
| dev->status = -res; |
| return res; |
| } |
| |
| if (!dir_out && res < max) /* short packet */ |
| break; |
| |
| done += res; |
| usb_dotoggle(dev, ep, dir_out); |
| } |
| |
| dev->act_len = done; |
| |
| return 0; |
| } |
| |
| int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int len,struct devrequest *setup) |
| { |
| int done = 0; |
| int devnum = usb_pipedevice(pipe); |
| int ep = usb_pipeendpoint(pipe); |
| |
| dev->status = 0; |
| |
| if (devnum == root_hub_devnum) |
| return sl811_rh_submit_urb(dev, pipe, buffer, len, setup); |
| |
| PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n", |
| devnum, ep, buffer, len, (int)setup->requesttype, |
| (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64); |
| |
| sl811_write(SL811_DEV_A, devnum); |
| sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep)); |
| /* setup phase */ |
| usb_settoggle(dev, ep, 1, 0); |
| if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep), |
| (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) { |
| int dir_in = usb_pipein(pipe); |
| int max = usb_maxpacket(dev, pipe); |
| |
| /* data phase */ |
| sl811_write(SL811_PIDEP_A, |
| PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep)); |
| usb_settoggle(dev, ep, usb_pipeout(pipe), 1); |
| while (done < len) { |
| int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, |
| max > len - done ? len - done : max); |
| if (res < 0) { |
| PDEBUG(0, "status data failed!\n"); |
| dev->status = -res; |
| return 0; |
| } |
| done += res; |
| usb_dotoggle(dev, ep, usb_pipeout(pipe)); |
| if (dir_in && res < max) /* short packet */ |
| break; |
| } |
| |
| /* status phase */ |
| sl811_write(SL811_PIDEP_A, |
| PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep)); |
| usb_settoggle(dev, ep, !usb_pipeout(pipe), 1); |
| if (sl811_send_packet(dev, |
| !dir_in ? usb_rcvctrlpipe(dev, ep) : |
| usb_sndctrlpipe(dev, ep), |
| 0, 0) < 0) { |
| PDEBUG(0, "status phase failed!\n"); |
| dev->status = -1; |
| } |
| } else { |
| PDEBUG(0, "setup phase failed!\n"); |
| dev->status = -1; |
| } |
| |
| dev->act_len = done; |
| |
| return done; |
| } |
| |
| int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int len, int interval) |
| { |
| PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe, |
| buffer, len, interval); |
| return -1; |
| } |
| |
| /* |
| * SL811 Virtual Root Hub |
| */ |
| |
| /* Device descriptor */ |
| static __u8 sl811_rh_dev_des[] = |
| { |
| 0x12, /* __u8 bLength; */ |
| 0x01, /* __u8 bDescriptorType; Device */ |
| 0x10, /* __u16 bcdUSB; v1.1 */ |
| 0x01, |
| 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ |
| 0x00, /* __u8 bDeviceSubClass; */ |
| 0x00, /* __u8 bDeviceProtocol; */ |
| 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ |
| 0x00, /* __u16 idVendor; */ |
| 0x00, |
| 0x00, /* __u16 idProduct; */ |
| 0x00, |
| 0x00, /* __u16 bcdDevice; */ |
| 0x00, |
| 0x00, /* __u8 iManufacturer; */ |
| 0x02, /* __u8 iProduct; */ |
| 0x01, /* __u8 iSerialNumber; */ |
| 0x01 /* __u8 bNumConfigurations; */ |
| }; |
| |
| /* Configuration descriptor */ |
| static __u8 sl811_rh_config_des[] = |
| { |
| 0x09, /* __u8 bLength; */ |
| 0x02, /* __u8 bDescriptorType; Configuration */ |
| 0x19, /* __u16 wTotalLength; */ |
| 0x00, |
| 0x01, /* __u8 bNumInterfaces; */ |
| 0x01, /* __u8 bConfigurationValue; */ |
| 0x00, /* __u8 iConfiguration; */ |
| 0x40, /* __u8 bmAttributes; |
| Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, |
| 4..0: resvd */ |
| 0x00, /* __u8 MaxPower; */ |
| |
| /* interface */ |
| 0x09, /* __u8 if_bLength; */ |
| 0x04, /* __u8 if_bDescriptorType; Interface */ |
| 0x00, /* __u8 if_bInterfaceNumber; */ |
| 0x00, /* __u8 if_bAlternateSetting; */ |
| 0x01, /* __u8 if_bNumEndpoints; */ |
| 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ |
| 0x00, /* __u8 if_bInterfaceSubClass; */ |
| 0x00, /* __u8 if_bInterfaceProtocol; */ |
| 0x00, /* __u8 if_iInterface; */ |
| |
| /* endpoint */ |
| 0x07, /* __u8 ep_bLength; */ |
| 0x05, /* __u8 ep_bDescriptorType; Endpoint */ |
| 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ |
| 0x03, /* __u8 ep_bmAttributes; Interrupt */ |
| 0x08, /* __u16 ep_wMaxPacketSize; */ |
| 0x00, |
| 0xff /* __u8 ep_bInterval; 255 ms */ |
| }; |
| |
| /* root hub class descriptor*/ |
| static __u8 sl811_rh_hub_des[] = |
| { |
| 0x09, /* __u8 bLength; */ |
| 0x29, /* __u8 bDescriptorType; Hub-descriptor */ |
| 0x01, /* __u8 bNbrPorts; */ |
| 0x00, /* __u16 wHubCharacteristics; */ |
| 0x00, |
| 0x50, /* __u8 bPwrOn2pwrGood; 2ms */ |
| 0x00, /* __u8 bHubContrCurrent; 0 mA */ |
| 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */ |
| 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ |
| }; |
| |
| /* |
| * helper routine for returning string descriptors in UTF-16LE |
| * input can actually be ISO-8859-1; ASCII is its 7-bit subset |
| */ |
| static int ascii2utf (char *s, u8 *utf, int utfmax) |
| { |
| int retval; |
| |
| for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { |
| *utf++ = *s++; |
| *utf++ = 0; |
| } |
| return retval; |
| } |
| |
| /* |
| * root_hub_string is used by each host controller's root hub code, |
| * so that they're identified consistently throughout the system. |
| */ |
| static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) |
| { |
| char buf [30]; |
| |
| /* assert (len > (2 * (sizeof (buf) + 1))); |
| assert (strlen (type) <= 8);*/ |
| |
| /* language ids */ |
| if (id == 0) { |
| *data++ = 4; *data++ = 3; /* 4 bytes data */ |
| *data++ = 0; *data++ = 0; /* some language id */ |
| return 4; |
| |
| /* serial number */ |
| } else if (id == 1) { |
| sprintf (buf, "%#x", serial); |
| |
| /* product description */ |
| } else if (id == 2) { |
| sprintf (buf, "USB %s Root Hub", type); |
| |
| /* id 3 == vendor description */ |
| |
| /* unsupported IDs --> "stall" */ |
| } else |
| return 0; |
| |
| ascii2utf (buf, data + 2, len - 2); |
| data [0] = 2 + strlen(buf) * 2; |
| data [1] = 3; |
| return data [0]; |
| } |
| |
| /* helper macro */ |
| #define OK(x) len = (x); break |
| |
| /* |
| * This function handles all USB request to the the virtual root hub |
| */ |
| static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, |
| void *data, int buf_len, struct devrequest *cmd) |
| { |
| __u8 data_buf[16]; |
| __u8 *bufp = data_buf; |
| int len = 0; |
| int status = 0; |
| |
| __u16 bmRType_bReq; |
| __u16 wValue; |
| __u16 wIndex; |
| __u16 wLength; |
| |
| if (usb_pipeint(pipe)) { |
| PDEBUG(0, "interrupt transfer unimplemented!\n"); |
| return 0; |
| } |
| |
| bmRType_bReq = cmd->requesttype | (cmd->request << 8); |
| wValue = le16_to_cpu (cmd->value); |
| wIndex = le16_to_cpu (cmd->index); |
| wLength = le16_to_cpu (cmd->length); |
| |
| PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n", |
| bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength); |
| |
| /* Request Destination: |
| without flags: Device, |
| USB_RECIP_INTERFACE: interface, |
| USB_RECIP_ENDPOINT: endpoint, |
| USB_TYPE_CLASS means HUB here, |
| USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here |
| */ |
| switch (bmRType_bReq) { |
| case RH_GET_STATUS: |
| *(__u16 *)bufp = cpu_to_le16(1); |
| OK(2); |
| |
| case RH_GET_STATUS | USB_RECIP_INTERFACE: |
| *(__u16 *)bufp = cpu_to_le16(0); |
| OK(2); |
| |
| case RH_GET_STATUS | USB_RECIP_ENDPOINT: |
| *(__u16 *)bufp = cpu_to_le16(0); |
| OK(2); |
| |
| case RH_GET_STATUS | USB_TYPE_CLASS: |
| *(__u32 *)bufp = cpu_to_le32(0); |
| OK(4); |
| |
| case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS: |
| *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus); |
| OK(4); |
| |
| case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT: |
| switch (wValue) { |
| case 1: |
| OK(0); |
| } |
| break; |
| |
| case RH_CLEAR_FEATURE | USB_TYPE_CLASS: |
| switch (wValue) { |
| case C_HUB_LOCAL_POWER: |
| OK(0); |
| |
| case C_HUB_OVER_CURRENT: |
| OK(0); |
| } |
| break; |
| |
| case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: |
| switch (wValue) { |
| case USB_PORT_FEAT_ENABLE: |
| rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE; |
| OK(0); |
| |
| case USB_PORT_FEAT_SUSPEND: |
| rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND; |
| OK(0); |
| |
| case USB_PORT_FEAT_POWER: |
| rh_status.wPortStatus &= ~USB_PORT_STAT_POWER; |
| OK(0); |
| |
| case USB_PORT_FEAT_C_CONNECTION: |
| rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION; |
| OK(0); |
| |
| case USB_PORT_FEAT_C_ENABLE: |
| rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE; |
| OK(0); |
| |
| case USB_PORT_FEAT_C_SUSPEND: |
| rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND; |
| OK(0); |
| |
| case USB_PORT_FEAT_C_OVER_CURRENT: |
| rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT; |
| OK(0); |
| |
| case USB_PORT_FEAT_C_RESET: |
| rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET; |
| OK(0); |
| } |
| break; |
| |
| case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: |
| switch (wValue) { |
| case USB_PORT_FEAT_SUSPEND: |
| rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND; |
| OK(0); |
| |
| case USB_PORT_FEAT_RESET: |
| rh_status.wPortStatus |= USB_PORT_STAT_RESET; |
| rh_status.wPortChange = 0; |
| rh_status.wPortChange |= USB_PORT_STAT_C_RESET; |
| rh_status.wPortStatus &= ~USB_PORT_STAT_RESET; |
| rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; |
| OK(0); |
| |
| case USB_PORT_FEAT_POWER: |
| rh_status.wPortStatus |= USB_PORT_STAT_POWER; |
| OK(0); |
| |
| case USB_PORT_FEAT_ENABLE: |
| rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; |
| OK(0); |
| } |
| break; |
| |
| case RH_SET_ADDRESS: |
| root_hub_devnum = wValue; |
| OK(0); |
| |
| case RH_GET_DESCRIPTOR: |
| switch ((wValue & 0xff00) >> 8) { |
| case USB_DT_DEVICE: |
| len = sizeof(sl811_rh_dev_des); |
| bufp = sl811_rh_dev_des; |
| OK(len); |
| |
| case USB_DT_CONFIG: |
| len = sizeof(sl811_rh_config_des); |
| bufp = sl811_rh_config_des; |
| OK(len); |
| |
| case USB_DT_STRING: |
| len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength); |
| if (len > 0) { |
| bufp = data; |
| OK(len); |
| } |
| |
| default: |
| status = -32; |
| } |
| break; |
| |
| case RH_GET_DESCRIPTOR | USB_TYPE_CLASS: |
| len = sizeof(sl811_rh_hub_des); |
| bufp = sl811_rh_hub_des; |
| OK(len); |
| |
| case RH_GET_CONFIGURATION: |
| bufp[0] = 0x01; |
| OK(1); |
| |
| case RH_SET_CONFIGURATION: |
| OK(0); |
| |
| default: |
| PDEBUG(1, "unsupported root hub command\n"); |
| status = -32; |
| } |
| |
| len = min(len, buf_len); |
| if (data != bufp) |
| memcpy(data, bufp, len); |
| |
| PDEBUG(5, "len = %d, status = %d\n", len, status); |
| |
| usb_dev->status = status; |
| usb_dev->act_len = len; |
| |
| return status == 0 ? len : status; |
| } |
| |
| #endif /* CONFIG_USB_SL811HS */ |