| /* |
| * (C) Copyright 2008-2011 |
| * Graeme Russ, <graeme.russ@gmail.com> |
| * |
| * (C) Copyright 2002 |
| * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> |
| * |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Marius Groeger <mgroeger@sysgo.de> |
| * |
| * (C) Copyright 2002 |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * Alex Zuepke <azu@sysgo.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <asm/control_regs.h> |
| #include <asm/cpu.h> |
| #include <asm/processor.h> |
| #include <asm/processor-flags.h> |
| #include <asm/interrupt.h> |
| #include <linux/compiler.h> |
| |
| /* |
| * Constructor for a conventional segment GDT (or LDT) entry |
| * This is a macro so it can be used in initialisers |
| */ |
| #define GDT_ENTRY(flags, base, limit) \ |
| ((((base) & 0xff000000ULL) << (56-24)) | \ |
| (((flags) & 0x0000f0ffULL) << 40) | \ |
| (((limit) & 0x000f0000ULL) << (48-16)) | \ |
| (((base) & 0x00ffffffULL) << 16) | \ |
| (((limit) & 0x0000ffffULL))) |
| |
| struct gdt_ptr { |
| u16 len; |
| u32 ptr; |
| } __packed; |
| |
| static void load_ds(u32 segment) |
| { |
| asm volatile("movl %0, %%ds" : : "r" (segment * X86_GDT_ENTRY_SIZE)); |
| } |
| |
| static void load_es(u32 segment) |
| { |
| asm volatile("movl %0, %%es" : : "r" (segment * X86_GDT_ENTRY_SIZE)); |
| } |
| |
| static void load_fs(u32 segment) |
| { |
| asm volatile("movl %0, %%fs" : : "r" (segment * X86_GDT_ENTRY_SIZE)); |
| } |
| |
| static void load_gs(u32 segment) |
| { |
| asm volatile("movl %0, %%gs" : : "r" (segment * X86_GDT_ENTRY_SIZE)); |
| } |
| |
| static void load_ss(u32 segment) |
| { |
| asm volatile("movl %0, %%ss" : : "r" (segment * X86_GDT_ENTRY_SIZE)); |
| } |
| |
| static void load_gdt(const u64 *boot_gdt, u16 num_entries) |
| { |
| struct gdt_ptr gdt; |
| |
| gdt.len = (num_entries * 8) - 1; |
| gdt.ptr = (u32)boot_gdt; |
| |
| asm volatile("lgdtl %0\n" : : "m" (gdt)); |
| } |
| |
| void setup_gdt(gd_t *id, u64 *gdt_addr) |
| { |
| /* CS: code, read/execute, 4 GB, base 0 */ |
| gdt_addr[X86_GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff); |
| |
| /* DS: data, read/write, 4 GB, base 0 */ |
| gdt_addr[X86_GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff); |
| |
| /* FS: data, read/write, 4 GB, base (Global Data Pointer) */ |
| id->arch.gd_addr = id; |
| gdt_addr[X86_GDT_ENTRY_32BIT_FS] = GDT_ENTRY(0xc093, |
| (ulong)&id->arch.gd_addr, 0xfffff); |
| |
| /* 16-bit CS: code, read/execute, 64 kB, base 0 */ |
| gdt_addr[X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff); |
| |
| /* 16-bit DS: data, read/write, 64 kB, base 0 */ |
| gdt_addr[X86_GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff); |
| |
| load_gdt(gdt_addr, X86_GDT_NUM_ENTRIES); |
| load_ds(X86_GDT_ENTRY_32BIT_DS); |
| load_es(X86_GDT_ENTRY_32BIT_DS); |
| load_gs(X86_GDT_ENTRY_32BIT_DS); |
| load_ss(X86_GDT_ENTRY_32BIT_DS); |
| load_fs(X86_GDT_ENTRY_32BIT_FS); |
| } |
| |
| int __weak x86_cleanup_before_linux(void) |
| { |
| #ifdef CONFIG_BOOTSTAGE_STASH |
| bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH, |
| CONFIG_BOOTSTAGE_STASH_SIZE); |
| #endif |
| |
| return 0; |
| } |
| |
| int x86_cpu_init_f(void) |
| { |
| const u32 em_rst = ~X86_CR0_EM; |
| const u32 mp_ne_set = X86_CR0_MP | X86_CR0_NE; |
| |
| /* initialize FPU, reset EM, set MP and NE */ |
| asm ("fninit\n" \ |
| "movl %%cr0, %%eax\n" \ |
| "andl %0, %%eax\n" \ |
| "orl %1, %%eax\n" \ |
| "movl %%eax, %%cr0\n" \ |
| : : "i" (em_rst), "i" (mp_ne_set) : "eax"); |
| |
| return 0; |
| } |
| |
| int x86_cpu_init_r(void) |
| { |
| /* Initialize core interrupt and exception functionality of CPU */ |
| cpu_init_interrupts(); |
| return 0; |
| } |
| int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r"))); |
| |
| void x86_enable_caches(void) |
| { |
| unsigned long cr0; |
| |
| cr0 = read_cr0(); |
| cr0 &= ~(X86_CR0_NW | X86_CR0_CD); |
| write_cr0(cr0); |
| wbinvd(); |
| } |
| void enable_caches(void) __attribute__((weak, alias("x86_enable_caches"))); |
| |
| void x86_disable_caches(void) |
| { |
| unsigned long cr0; |
| |
| cr0 = read_cr0(); |
| cr0 |= X86_CR0_NW | X86_CR0_CD; |
| wbinvd(); |
| write_cr0(cr0); |
| wbinvd(); |
| } |
| void disable_caches(void) __attribute__((weak, alias("x86_disable_caches"))); |
| |
| int x86_init_cache(void) |
| { |
| enable_caches(); |
| |
| return 0; |
| } |
| int init_cache(void) __attribute__((weak, alias("x86_init_cache"))); |
| |
| int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| printf("resetting ...\n"); |
| |
| /* wait 50 ms */ |
| udelay(50000); |
| disable_interrupts(); |
| reset_cpu(0); |
| |
| /*NOTREACHED*/ |
| return 0; |
| } |
| |
| void flush_cache(unsigned long dummy1, unsigned long dummy2) |
| { |
| asm("wbinvd\n"); |
| } |
| |
| void __attribute__ ((regparm(0))) generate_gpf(void); |
| |
| /* segment 0x70 is an arbitrary segment which does not exist */ |
| asm(".globl generate_gpf\n" |
| ".hidden generate_gpf\n" |
| ".type generate_gpf, @function\n" |
| "generate_gpf:\n" |
| "ljmp $0x70, $0x47114711\n"); |
| |
| __weak void reset_cpu(ulong addr) |
| { |
| printf("Resetting using x86 Triple Fault\n"); |
| set_vector(13, generate_gpf); /* general protection fault handler */ |
| set_vector(8, generate_gpf); /* double fault handler */ |
| generate_gpf(); /* start the show */ |
| } |
| |
| int dcache_status(void) |
| { |
| return !(read_cr0() & 0x40000000); |
| } |
| |
| /* Define these functions to allow ehch-hcd to function */ |
| void flush_dcache_range(unsigned long start, unsigned long stop) |
| { |
| } |
| |
| void invalidate_dcache_range(unsigned long start, unsigned long stop) |
| { |
| } |
| |
| void dcache_enable(void) |
| { |
| enable_caches(); |
| } |
| |
| void dcache_disable(void) |
| { |
| disable_caches(); |
| } |
| |
| void icache_enable(void) |
| { |
| } |
| |
| void icache_disable(void) |
| { |
| } |
| |
| int icache_status(void) |
| { |
| return 1; |
| } |
| |
| void cpu_enable_paging_pae(ulong cr3) |
| { |
| __asm__ __volatile__( |
| /* Load the page table address */ |
| "movl %0, %%cr3\n" |
| /* Enable pae */ |
| "movl %%cr4, %%eax\n" |
| "orl $0x00000020, %%eax\n" |
| "movl %%eax, %%cr4\n" |
| /* Enable paging */ |
| "movl %%cr0, %%eax\n" |
| "orl $0x80000000, %%eax\n" |
| "movl %%eax, %%cr0\n" |
| : |
| : "r" (cr3) |
| : "eax"); |
| } |
| |
| void cpu_disable_paging_pae(void) |
| { |
| /* Turn off paging */ |
| __asm__ __volatile__ ( |
| /* Disable paging */ |
| "movl %%cr0, %%eax\n" |
| "andl $0x7fffffff, %%eax\n" |
| "movl %%eax, %%cr0\n" |
| /* Disable pae */ |
| "movl %%cr4, %%eax\n" |
| "andl $0xffffffdf, %%eax\n" |
| "movl %%eax, %%cr4\n" |
| : |
| : |
| : "eax"); |
| } |
| |
| static bool has_cpuid(void) |
| { |
| unsigned long flag; |
| |
| asm volatile("pushf\n" \ |
| "pop %%eax\n" |
| "mov %%eax, %%ecx\n" /* ecx = flags */ |
| "xor %1, %%eax\n" |
| "push %%eax\n" |
| "popf\n" /* flags ^= $2 */ |
| "pushf\n" |
| "pop %%eax\n" /* eax = flags */ |
| "push %%ecx\n" |
| "popf\n" /* flags = ecx */ |
| "xor %%ecx, %%eax\n" |
| "mov %%eax, %0" |
| : "=r" (flag) |
| : "i" (1 << 21) |
| : "eax", "ecx", "memory"); |
| |
| return flag != 0; |
| } |
| |
| static bool can_detect_long_mode(void) |
| { |
| unsigned long flag; |
| |
| asm volatile("mov $0x80000000, %%eax\n" |
| "cpuid\n" |
| "mov %%eax, %0" |
| : "=r" (flag) |
| : |
| : "eax", "ebx", "ecx", "edx", "memory"); |
| |
| return flag > 0x80000000UL; |
| } |
| |
| static bool has_long_mode(void) |
| { |
| unsigned long flag; |
| |
| asm volatile("mov $0x80000001, %%eax\n" |
| "cpuid\n" |
| "mov %%edx, %0" |
| : "=r" (flag) |
| : |
| : "eax", "ebx", "ecx", "edx", "memory"); |
| |
| return flag & (1 << 29) ? true : false; |
| } |
| |
| int cpu_has_64bit(void) |
| { |
| return has_cpuid() && can_detect_long_mode() && |
| has_long_mode(); |
| } |
| |
| int print_cpuinfo(void) |
| { |
| printf("CPU: %s\n", cpu_has_64bit() ? "x86_64" : "x86"); |
| |
| return 0; |
| } |
| |
| #define PAGETABLE_SIZE (6 * 4096) |
| |
| /** |
| * build_pagetable() - build a flat 4GiB page table structure for 64-bti mode |
| * |
| * @pgtable: Pointer to a 24iKB block of memory |
| */ |
| static void build_pagetable(uint32_t *pgtable) |
| { |
| uint i; |
| |
| memset(pgtable, '\0', PAGETABLE_SIZE); |
| |
| /* Level 4 needs a single entry */ |
| pgtable[0] = (uint32_t)&pgtable[1024] + 7; |
| |
| /* Level 3 has one 64-bit entry for each GiB of memory */ |
| for (i = 0; i < 4; i++) { |
| pgtable[1024 + i * 2] = (uint32_t)&pgtable[2048] + |
| 0x1000 * i + 7; |
| } |
| |
| /* Level 2 has 2048 64-bit entries, each repesenting 2MiB */ |
| for (i = 0; i < 2048; i++) |
| pgtable[2048 + i * 2] = 0x183 + (i << 21UL); |
| } |
| |
| int cpu_jump_to_64bit(ulong setup_base, ulong target) |
| { |
| uint32_t *pgtable; |
| |
| pgtable = memalign(4096, PAGETABLE_SIZE); |
| if (!pgtable) |
| return -ENOMEM; |
| |
| build_pagetable(pgtable); |
| cpu_call64((ulong)pgtable, setup_base, target); |
| free(pgtable); |
| |
| return -EFAULT; |
| } |