blob: a1d23b64630dbe6b94fe85f22e9abaef90d82d1d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2018, 2021 NXP
*/
#ifndef __LS1012AFRWY_H__
#define __LS1012AFRWY_H__
#include "ls1012a_common.h"
/* Board Rev*/
#define BOARD_REV_A_B 0x0
#define BOARD_REV_C 0x00080000
#define BOARD_REV_MASK 0x001A0000
/* DDR */
#define SYS_SDRAM_SIZE_512 0x20000000
#define SYS_SDRAM_SIZE_1024 0x40000000
/* ENV */
#define CONFIG_SYS_FSL_QSPI_BASE 0x40000000
#ifndef CONFIG_SPL_BUILD
#undef BOOT_TARGET_DEVICES
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#endif
#define CONFIG_PCIE1 /* PCIE controller 1 */
#define CONFIG_PCI_SCAN_SHOW
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr=0x01000000\0" \
"kernel_size_sd=0x16000\0" \
"kernelhdr_size_sd=0x10\0" \
"kernel_addr_sd=0x8000\0" \
"kernelhdr_addr_sd=0x4000\0" \
"kernelheader_addr=0x1fc000\0" \
"kernelheader_addr=0x1fc000\0" \
"scriptaddr=0x80000000\0" \
"scripthdraddr=0x80080000\0" \
"fdtheader_addr_r=0x80100000\0" \
"kernelheader_addr_r=0x80200000\0" \
"kernelheader_size=0x40000\0" \
"kernel_addr_r=0x92000000\0" \
"fdt_addr_r=0x90000000\0" \
"load_addr=0x92000000\0" \
"kernel_size=0x2800000\0" \
"kernelheader_size=0x40000\0" \
"bootm_size=0x10000000\0" \
"console=ttyS0,115200\0" \
"BOARD=ls1012afrwy\0" \
BOOTENV \
"boot_scripts=ls1012afrwy_boot.scr\0" \
"boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \
"scan_dev_for_boot_part=" \
"part list ${devtype} ${devnum} devplist; " \
"env exists devplist || setenv devplist 1; " \
"for distro_bootpart in ${devplist}; do " \
"if fstype ${devtype} " \
"${devnum}:${distro_bootpart} " \
"bootfstype; then " \
"run scan_dev_for_boot; " \
"fi; " \
"done\0" \
"boot_a_script=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
"${scriptaddr} ${prefix}${script}; " \
"env exists secureboot && load ${devtype} " \
"${devnum}:${distro_bootpart} " \
"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
"env exists secureboot " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
"sd_bootcmd=echo Trying load from sd card..;" \
"mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
#ifdef CONFIG_TFABOOT
#undef QSPI_NOR_BOOTCOMMAND
#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\
"env exists secureboot && esbc_halt;"
#endif
#include <asm/fsl_secure_boot.h>
#include <asm/fsl_secure_boot.h>
#endif /* __LS1012AFRWY_H__ */