board/freescale/common/pixis.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2006,2010 Freescale Semiconductor
  * Jeff Brown
  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
  */

 #include <common.h>
 #include <command.h>
 #include <asm/io.h>

 #define pixis_base (u8 *)PIXIS_BASE

 /*
  * Simple board reset.
  */
 void pixis_reset(void)
 {
 	out_8(pixis_base + PIXIS_RST, 0);

 	while (1);
 }

 /*
  * Per table 27, page 58 of MPC8641HPCN spec.
  */
 static int set_px_sysclk(unsigned long sysclk)
 {
 	u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;

 	switch (sysclk) {
 	case 33:
 		sysclk_s = 0x04;
 		sysclk_r = 0x04;
 		sysclk_v = 0x07;
 		sysclk_aux = 0x00;
 		break;
 	case 40:
 		sysclk_s = 0x01;
 		sysclk_r = 0x1F;
 		sysclk_v = 0x20;
 		sysclk_aux = 0x01;
 		break;
 	case 50:
 		sysclk_s = 0x01;
 		sysclk_r = 0x1F;
 		sysclk_v = 0x2A;
 		sysclk_aux = 0x02;
 		break;
 	case 66:
 		sysclk_s = 0x01;
 		sysclk_r = 0x04;
 		sysclk_v = 0x04;
 		sysclk_aux = 0x03;
 		break;
 	case 83:
 		sysclk_s = 0x01;
 		sysclk_r = 0x1F;
 		sysclk_v = 0x4B;
 		sysclk_aux = 0x04;
 		break;
 	case 100:
 		sysclk_s = 0x01;
 		sysclk_r = 0x1F;
 		sysclk_v = 0x5C;
 		sysclk_aux = 0x05;
 		break;
 	case 134:
 		sysclk_s = 0x06;
 		sysclk_r = 0x1F;
 		sysclk_v = 0x3B;
 		sysclk_aux = 0x06;
 		break;
 	case 166:
 		sysclk_s = 0x06;
 		sysclk_r = 0x1F;
 		sysclk_v = 0x4B;
 		sysclk_aux = 0x07;
 		break;
 	default:
 		printf("Unsupported SYSCLK frequency.\n");
 		return 0;
 	}

 	vclkh = (sysclk_s << 5) | sysclk_r;
 	vclkl = sysclk_v;

 	out_8(pixis_base + PIXIS_VCLKH, vclkh);
 	out_8(pixis_base + PIXIS_VCLKL, vclkl);

 	out_8(pixis_base + PIXIS_AUX, sysclk_aux);

 	return 1;
 }

 /* Set the CFG_SYSPLL bits
  *
  * This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
  * read_from_px_regs() is called.
  */
 static int set_px_mpxpll(unsigned long mpxpll)
 {
 	switch (mpxpll) {
 	case 2:
 	case 4:
 	case 6:
 	case 8:
 	case 10:
 	case 12:
 	case 14:
 	case 16:
 		clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
 		return 1;
 	}

 	printf("Unsupported MPXPLL ratio.\n");
 	return 0;
 }

 static int set_px_corepll(unsigned long corepll)
 {
 	u8 val;

 	switch (corepll) {
 	case 20:
 		val = 0x08;
 		break;
 	case 25:
 		val = 0x0C;
 		break;
 	case 30:
 		val = 0x10;
 		break;
 	case 35:
 		val = 0x1C;
 		break;
 	case 40:
 		val = 0x14;
 		break;
 	case 45:
 		val = 0x0E;
 		break;
 	default:
 		printf("Unsupported COREPLL ratio.\n");
 		return 0;
 	}

 	clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
 	return 1;
 }

 #ifndef CONFIG_SYS_PIXIS_VCFGEN0_ENABLE
 #define CONFIG_SYS_PIXIS_VCFGEN0_ENABLE		0x1C
 #endif

 /* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
  *
  * The PIXIS can be programmed to look at either the on-board dip switches
  * or various other PIXIS registers to determine the values for COREPLL,
  * MPXPLL, and SYSCLK.
  *
  * CONFIG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
  * register that tells the pixis to use the various PIXIS register.
  */
 static void read_from_px_regs(int set)
 {
 	u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);

 	if (set)
 		tmp = tmp | CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
 	else
 		tmp = tmp & ~CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;

 	out_8(pixis_base + PIXIS_VCFGEN0, tmp);
 }

 /* CONFIG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
  * register that tells the pixis to use the PX_VBOOT[LBMAP] register.
  */
 #ifndef CONFIG_SYS_PIXIS_VBOOT_ENABLE
 #define CONFIG_SYS_PIXIS_VBOOT_ENABLE	0x04
 #endif

 /* Configure the source of the boot location
  *
  * The PIXIS can be programmed to look at either the on-board dip switches
  * or the PX_VBOOT[LBMAP] register to determine where we should boot.
  *
  * If we want to boot from the alternate boot bank, we need to tell the PIXIS
  * to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
  */
 static void read_from_px_regs_altbank(int set)
 {
 	u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);

 	if (set)
 		tmp = tmp | CONFIG_SYS_PIXIS_VBOOT_ENABLE;
 	else
 		tmp = tmp & ~CONFIG_SYS_PIXIS_VBOOT_ENABLE;

 	out_8(pixis_base + PIXIS_VCFGEN1, tmp);
 }

 /* CONFIG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
  * tells the PIXIS what the alternate flash bank is.
  *
  * Note that it's not really a mask.  It contains the actual LBMAP bits that
  * must be set to select the alternate bank.  This code assumes that the
  * primary bank has these bits set to 0, and the alternate bank has these
  * bits set to 1.
  */
 #ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
 #define CONFIG_SYS_PIXIS_VBOOT_MASK	(0x40)
 #endif

 /* Tell the PIXIS to boot from the default flash bank
  *
  * Program the default flash bank into the VBOOT register.  This register is
  * used only if PX_VCFGEN1[FLASH]=1.
  */
 static void clear_altbank(void)
 {
 	clrbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
 }

 /* Tell the PIXIS to boot from the alternate flash bank
  *
  * Program the alternate flash bank into the VBOOT register.  This register is
  * used only if PX_VCFGEN1[FLASH]=1.
  */
 static void set_altbank(void)
 {
 	setbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
 }

 /* Reset the board with watchdog disabled.
  *
  * This respects the altbank setting.
  */
 static void set_px_go(void)
 {
 	/* Disable the VELA sequencer and watchdog */
 	clrbits_8(pixis_base + PIXIS_VCTL, 9);

 	/* Reboot by starting the VELA sequencer */
 	setbits_8(pixis_base + PIXIS_VCTL, 0x1);

 	while (1);
 }

 /* Reset the board with watchdog enabled.
  *
  * This respects the altbank setting.
  */
 static void set_px_go_with_watchdog(void)
 {
 	/* Disable the VELA sequencer */
 	clrbits_8(pixis_base + PIXIS_VCTL, 1);

 	/* Enable the watchdog and reboot by starting the VELA sequencer */
 	setbits_8(pixis_base + PIXIS_VCTL, 0x9);

 	while (1);
 }

 /* Disable the watchdog
  *
  */
 static int pixis_disable_watchdog_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
 				      char *const argv[])
 {
 	/* Disable the VELA sequencer and the watchdog */
 	clrbits_8(pixis_base + PIXIS_VCTL, 9);

 	return 0;
 }

 U_BOOT_CMD(
 	diswd, 1, 0, pixis_disable_watchdog_cmd,
 	"Disable watchdog timer",
 	""
 );

 #ifdef CONFIG_PIXIS_SGMII_CMD

 /* Enable or disable SGMII mode for a TSEC
  */
 static int pixis_set_sgmii(struct cmd_tbl *cmdtp, int flag, int argc,
 			   char *const argv[])
 {
 	int which_tsec = -1;
 	unsigned char mask;
 	unsigned char switch_mask;

 	if ((argc > 2) && (strcmp(argv[1], "all") != 0))
 		which_tsec = simple_strtoul(argv[1], NULL, 0);

 	switch (which_tsec) {
 #ifdef CONFIG_TSEC1
 	case 1:
 		mask = PIXIS_VSPEED2_TSEC1SER;
 		switch_mask = PIXIS_VCFGEN1_TSEC1SER;
 		break;
 #endif
 #ifdef CONFIG_TSEC2
 	case 2:
 		mask = PIXIS_VSPEED2_TSEC2SER;
 		switch_mask = PIXIS_VCFGEN1_TSEC2SER;
 		break;
 #endif
 #ifdef CONFIG_TSEC3
 	case 3:
 		mask = PIXIS_VSPEED2_TSEC3SER;
 		switch_mask = PIXIS_VCFGEN1_TSEC3SER;
 		break;
 #endif
 #ifdef CONFIG_TSEC4
 	case 4:
 		mask = PIXIS_VSPEED2_TSEC4SER;
 		switch_mask = PIXIS_VCFGEN1_TSEC4SER;
 		break;
 #endif
 	default:
 		mask = PIXIS_VSPEED2_MASK;
 		switch_mask = PIXIS_VCFGEN1_MASK;
 		break;
 	}

 	/* Toggle whether the switches or FPGA control the settings */
 	if (!strcmp(argv[argc - 1], "switch"))
 		clrbits_8(pixis_base + PIXIS_VCFGEN1, switch_mask);
 	else
 		setbits_8(pixis_base + PIXIS_VCFGEN1, switch_mask);

 	/* If it's not the switches, enable or disable SGMII, as specified */
 	if (!strcmp(argv[argc - 1], "on"))
 		clrbits_8(pixis_base + PIXIS_VSPEED2, mask);
 	else if (!strcmp(argv[argc - 1], "off"))
 		setbits_8(pixis_base + PIXIS_VSPEED2, mask);

 	return 0;
 }

 U_BOOT_CMD(
 	pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
 	"pixis_set_sgmii"
 	" - Enable or disable SGMII mode for a given TSEC \n",
 	"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
 	"    TSEC num: 1,2,3,4 or 'all'.  'all' is default.\n"
 	"    on - enables SGMII\n"
 	"    off - disables SGMII\n"
 	"    switch - use switch settings"
 );

 #endif

 /*
  * This function takes the non-integral cpu:mpx pll ratio
  * and converts it to an integer that can be used to assign
  * FPGA register values.
  * input: strptr i.e. argv[2]
  */
 static unsigned long strfractoint(char *strptr)
 {
 	int i, j;
 	int mulconst;
 	int no_dec = 0;
 	unsigned long intval = 0, decval = 0;
 	char intarr[3], decarr[3];

 	/* Assign the integer part to intarr[]
 	 * If there is no decimal point i.e.
 	 * if the ratio is an integral value
 	 * simply create the intarr.
 	 */
 	i = 0;
 	while (strptr[i] != '.') {
 		if (strptr[i] == 0) {
 			no_dec = 1;
 			break;
 		}
 		intarr[i] = strptr[i];
 		i++;
 	}

 	intarr[i] = '\0';

 	if (no_dec) {
 		/* Currently needed only for single digit corepll ratios */
 		mulconst = 10;
 		decval = 0;
 	} else {
 		j = 0;
 		i++;		/* Skipping the decimal point */
 		while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
 			decarr[j] = strptr[i];
 			i++;
 			j++;
 		}

 		decarr[j] = '\0';

 		mulconst = 1;
 		for (i = 0; i < j; i++)
 			mulconst *= 10;
 		decval = dectoul(decarr, NULL);
 	}

 	intval = dectoul(intarr, NULL);
 	intval = intval * mulconst;

 	return intval + decval;
 }

 static int pixis_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
 			   char *const argv[])
 {
 	unsigned int i;
 	char *p_cf = NULL;
 	char *p_cf_sysclk = NULL;
 	char *p_cf_corepll = NULL;
 	char *p_cf_mpxpll = NULL;
 	char *p_altbank = NULL;
 	char *p_wd = NULL;
 	int unknown_param = 0;

 	/*
 	 * No args is a simple reset request.
 	 */
 	if (argc <= 1) {
 		pixis_reset();
 		/* not reached */
 	}

 	for (i = 1; i < argc; i++) {
 		if (strcmp(argv[i], "cf") == 0) {
 			p_cf = argv[i];
 			if (i + 3 >= argc) {
 				break;
 			}
 			p_cf_sysclk = argv[i+1];
 			p_cf_corepll = argv[i+2];
 			p_cf_mpxpll = argv[i+3];
 			i += 3;
 			continue;
 		}

 		if (strcmp(argv[i], "altbank") == 0) {
 			p_altbank = argv[i];
 			continue;
 		}

 		if (strcmp(argv[i], "wd") == 0) {
 			p_wd = argv[i];
 			continue;
 		}

 		unknown_param = 1;
 	}

 	/*
 	 * Check that cf has all required parms
 	 */
 	if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
 	    ||	unknown_param) {
 #ifdef CONFIG_SYS_LONGHELP
 		puts(cmdtp->help);
 		putc('\n');
 #endif
 		return 1;
 	}

 	/*
 	 * PIXIS seems to be sensitive to the ordering of
 	 * the registers that are touched.
 	 */
 	read_from_px_regs(0);

 	if (p_altbank)
 		read_from_px_regs_altbank(0);

 	clear_altbank();

 	/*
 	 * Clock configuration specified.
 	 */
 	if (p_cf) {
 		unsigned long sysclk;
 		unsigned long corepll;
 		unsigned long mpxpll;

 		sysclk = dectoul(p_cf_sysclk, NULL);
 		corepll = strfractoint(p_cf_corepll);
 		mpxpll = dectoul(p_cf_mpxpll, NULL);

 		if (!(set_px_sysclk(sysclk)
 		      && set_px_corepll(corepll)
 		      && set_px_mpxpll(mpxpll))) {
 #ifdef CONFIG_SYS_LONGHELP
 			puts(cmdtp->help);
 			putc('\n');
 #endif
 			return 1;
 		}
 		read_from_px_regs(1);
 	}

 	/*
 	 * Altbank specified
 	 *
 	 * NOTE CHANGE IN BEHAVIOR: previous code would default
 	 * to enabling watchdog if altbank is specified.
 	 * Now the watchdog must be enabled explicitly using 'wd'.
 	 */
 	if (p_altbank) {
 		set_altbank();
 		read_from_px_regs_altbank(1);
 	}

 	/*
 	 * Reset with watchdog specified.
 	 */
 	if (p_wd)
 		set_px_go_with_watchdog();
 	else
 		set_px_go();

 	/*
 	 * Shouldn't be reached.
 	 */
 	return 0;
 }


 U_BOOT_CMD(
 	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
 	"Reset the board using the FPGA sequencer",
 	"    pixis_reset\n"
 	"    pixis_reset [altbank]\n"
 	"    pixis_reset altbank wd\n"
 	"    pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
 	"    pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
 );
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright 2006,2010 Freescale Semiconductor
	* Jeff Brown
	* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
	*/

	#include <common.h>
	#include <command.h>
	#include <asm/io.h>

	#define pixis_base (u8 *)PIXIS_BASE

	/*
	* Simple board reset.
	*/
	void pixis_reset(void)
	{
	out_8(pixis_base + PIXIS_RST, 0);

	while (1);
	}

	/*
	* Per table 27, page 58 of MPC8641HPCN spec.
	*/
	static int set_px_sysclk(unsigned long sysclk)
	{
	u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux;

	switch (sysclk) {
	case 33:
	sysclk_s = 0x04;
	sysclk_r = 0x04;
	sysclk_v = 0x07;
	sysclk_aux = 0x00;
	break;
	case 40:
	sysclk_s = 0x01;
	sysclk_r = 0x1F;
	sysclk_v = 0x20;
	sysclk_aux = 0x01;
	break;
	case 50:
	sysclk_s = 0x01;
	sysclk_r = 0x1F;
	sysclk_v = 0x2A;
	sysclk_aux = 0x02;
	break;
	case 66:
	sysclk_s = 0x01;
	sysclk_r = 0x04;
	sysclk_v = 0x04;
	sysclk_aux = 0x03;
	break;
	case 83:
	sysclk_s = 0x01;
	sysclk_r = 0x1F;
	sysclk_v = 0x4B;
	sysclk_aux = 0x04;
	break;
	case 100:
	sysclk_s = 0x01;
	sysclk_r = 0x1F;
	sysclk_v = 0x5C;
	sysclk_aux = 0x05;
	break;
	case 134:
	sysclk_s = 0x06;
	sysclk_r = 0x1F;
	sysclk_v = 0x3B;
	sysclk_aux = 0x06;
	break;
	case 166:
	sysclk_s = 0x06;
	sysclk_r = 0x1F;
	sysclk_v = 0x4B;
	sysclk_aux = 0x07;
	break;
	default:
	printf("Unsupported SYSCLK frequency.\n");
	return 0;
	}

	vclkh = (sysclk_s << 5) \| sysclk_r;
	vclkl = sysclk_v;

	out_8(pixis_base + PIXIS_VCLKH, vclkh);
	out_8(pixis_base + PIXIS_VCLKL, vclkl);

	out_8(pixis_base + PIXIS_AUX, sysclk_aux);

	return 1;
	}

	/* Set the CFG_SYSPLL bits
	*
	* This only has effect if PX_VCFGEN0[SYSPLL]=1, which is true if
	* read_from_px_regs() is called.
	*/
	static int set_px_mpxpll(unsigned long mpxpll)
	{
	switch (mpxpll) {
	case 2:
	case 4:
	case 6:
	case 8:
	case 10:
	case 12:
	case 14:
	case 16:
	clrsetbits_8(pixis_base + PIXIS_VSPEED1, 0x1F, mpxpll);
	return 1;
	}

	printf("Unsupported MPXPLL ratio.\n");
	return 0;
	}

	static int set_px_corepll(unsigned long corepll)
	{
	u8 val;

	switch (corepll) {
	case 20:
	val = 0x08;
	break;
	case 25:
	val = 0x0C;
	break;
	case 30:
	val = 0x10;
	break;
	case 35:
	val = 0x1C;
	break;
	case 40:
	val = 0x14;
	break;
	case 45:
	val = 0x0E;
	break;
	default:
	printf("Unsupported COREPLL ratio.\n");
	return 0;
	}

	clrsetbits_8(pixis_base + PIXIS_VSPEED0, 0x1F, val);
	return 1;
	}

	#ifndef CONFIG_SYS_PIXIS_VCFGEN0_ENABLE
	#define CONFIG_SYS_PIXIS_VCFGEN0_ENABLE 0x1C
	#endif

	/* Tell the PIXIS where to find the COREPLL, MPXPLL, SYSCLK values
	*
	* The PIXIS can be programmed to look at either the on-board dip switches
	* or various other PIXIS registers to determine the values for COREPLL,
	* MPXPLL, and SYSCLK.
	*
	* CONFIG_SYS_PIXIS_VCFGEN0_ENABLE is the value to write to the PIXIS_VCFGEN0
	* register that tells the pixis to use the various PIXIS register.
	*/
	static void read_from_px_regs(int set)
	{
	u8 tmp = in_8(pixis_base + PIXIS_VCFGEN0);

	if (set)
	tmp = tmp \| CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;
	else
	tmp = tmp & ~CONFIG_SYS_PIXIS_VCFGEN0_ENABLE;

	out_8(pixis_base + PIXIS_VCFGEN0, tmp);
	}

	/* CONFIG_SYS_PIXIS_VBOOT_ENABLE is the value to write to the PX_VCFGEN1
	* register that tells the pixis to use the PX_VBOOT[LBMAP] register.
	*/
	#ifndef CONFIG_SYS_PIXIS_VBOOT_ENABLE
	#define CONFIG_SYS_PIXIS_VBOOT_ENABLE 0x04
	#endif

	/* Configure the source of the boot location
	*
	* The PIXIS can be programmed to look at either the on-board dip switches
	* or the PX_VBOOT[LBMAP] register to determine where we should boot.
	*
	* If we want to boot from the alternate boot bank, we need to tell the PIXIS
	* to ignore the on-board dip switches and use the PX_VBOOT[LBMAP] instead.
	*/
	static void read_from_px_regs_altbank(int set)
	{
	u8 tmp = in_8(pixis_base + PIXIS_VCFGEN1);

	if (set)
	tmp = tmp \| CONFIG_SYS_PIXIS_VBOOT_ENABLE;
	else
	tmp = tmp & ~CONFIG_SYS_PIXIS_VBOOT_ENABLE;

	out_8(pixis_base + PIXIS_VCFGEN1, tmp);
	}

	/* CONFIG_SYS_PIXIS_VBOOT_MASK contains the bits to set in VBOOT register that
	* tells the PIXIS what the alternate flash bank is.
	*
	* Note that it's not really a mask. It contains the actual LBMAP bits that
	* must be set to select the alternate bank. This code assumes that the
	* primary bank has these bits set to 0, and the alternate bank has these
	* bits set to 1.
	*/
	#ifndef CONFIG_SYS_PIXIS_VBOOT_MASK
	#define CONFIG_SYS_PIXIS_VBOOT_MASK (0x40)
	#endif

	/* Tell the PIXIS to boot from the default flash bank
	*
	* Program the default flash bank into the VBOOT register. This register is
	* used only if PX_VCFGEN1[FLASH]=1.
	*/
	static void clear_altbank(void)
	{
	clrbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
	}

	/* Tell the PIXIS to boot from the alternate flash bank
	*
	* Program the alternate flash bank into the VBOOT register. This register is
	* used only if PX_VCFGEN1[FLASH]=1.
	*/
	static void set_altbank(void)
	{
	setbits_8(pixis_base + PIXIS_VBOOT, CONFIG_SYS_PIXIS_VBOOT_MASK);
	}

	/* Reset the board with watchdog disabled.
	*
	* This respects the altbank setting.
	*/
	static void set_px_go(void)
	{
	/* Disable the VELA sequencer and watchdog */
	clrbits_8(pixis_base + PIXIS_VCTL, 9);

	/* Reboot by starting the VELA sequencer */
	setbits_8(pixis_base + PIXIS_VCTL, 0x1);

	while (1);
	}

	/* Reset the board with watchdog enabled.
	*
	* This respects the altbank setting.
	*/
	static void set_px_go_with_watchdog(void)
	{
	/* Disable the VELA sequencer */
	clrbits_8(pixis_base + PIXIS_VCTL, 1);

	/* Enable the watchdog and reboot by starting the VELA sequencer */
	setbits_8(pixis_base + PIXIS_VCTL, 0x9);

	while (1);
	}

	/* Disable the watchdog
	*
	*/
	static int pixis_disable_watchdog_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
	char *const argv[])
	{
	/* Disable the VELA sequencer and the watchdog */
	clrbits_8(pixis_base + PIXIS_VCTL, 9);

	return 0;
	}

	U_BOOT_CMD(
	diswd, 1, 0, pixis_disable_watchdog_cmd,
	"Disable watchdog timer",
	""
	);

	#ifdef CONFIG_PIXIS_SGMII_CMD

	/* Enable or disable SGMII mode for a TSEC
	*/
	static int pixis_set_sgmii(struct cmd_tbl *cmdtp, int flag, int argc,
	char *const argv[])
	{
	int which_tsec = -1;
	unsigned char mask;
	unsigned char switch_mask;

	if ((argc > 2) && (strcmp(argv[1], "all") != 0))
	which_tsec = simple_strtoul(argv[1], NULL, 0);

	switch (which_tsec) {
	#ifdef CONFIG_TSEC1
	case 1:
	mask = PIXIS_VSPEED2_TSEC1SER;
	switch_mask = PIXIS_VCFGEN1_TSEC1SER;
	break;
	#endif
	#ifdef CONFIG_TSEC2
	case 2:
	mask = PIXIS_VSPEED2_TSEC2SER;
	switch_mask = PIXIS_VCFGEN1_TSEC2SER;
	break;
	#endif
	#ifdef CONFIG_TSEC3
	case 3:
	mask = PIXIS_VSPEED2_TSEC3SER;
	switch_mask = PIXIS_VCFGEN1_TSEC3SER;
	break;
	#endif
	#ifdef CONFIG_TSEC4
	case 4:
	mask = PIXIS_VSPEED2_TSEC4SER;
	switch_mask = PIXIS_VCFGEN1_TSEC4SER;
	break;
	#endif
	default:
	mask = PIXIS_VSPEED2_MASK;
	switch_mask = PIXIS_VCFGEN1_MASK;
	break;
	}

	/* Toggle whether the switches or FPGA control the settings */
	if (!strcmp(argv[argc - 1], "switch"))
	clrbits_8(pixis_base + PIXIS_VCFGEN1, switch_mask);
	else
	setbits_8(pixis_base + PIXIS_VCFGEN1, switch_mask);

	/* If it's not the switches, enable or disable SGMII, as specified */
	if (!strcmp(argv[argc - 1], "on"))
	clrbits_8(pixis_base + PIXIS_VSPEED2, mask);
	else if (!strcmp(argv[argc - 1], "off"))
	setbits_8(pixis_base + PIXIS_VSPEED2, mask);

	return 0;
	}

	U_BOOT_CMD(
	pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
	"pixis_set_sgmii"
	" - Enable or disable SGMII mode for a given TSEC \n",
	"\npixis_set_sgmii [TSEC num] <on\|off\|switch>\n"
	" TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
	" on - enables SGMII\n"
	" off - disables SGMII\n"
	" switch - use switch settings"
	);

	#endif

	/*
	* This function takes the non-integral cpu:mpx pll ratio
	* and converts it to an integer that can be used to assign
	* FPGA register values.
	* input: strptr i.e. argv[2]
	*/
	static unsigned long strfractoint(char *strptr)
	{
	int i, j;
	int mulconst;
	int no_dec = 0;
	unsigned long intval = 0, decval = 0;
	char intarr[3], decarr[3];

	/* Assign the integer part to intarr[]
	* If there is no decimal point i.e.
	* if the ratio is an integral value
	* simply create the intarr.
	*/
	i = 0;
	while (strptr[i] != '.') {
	if (strptr[i] == 0) {
	no_dec = 1;
	break;
	}
	intarr[i] = strptr[i];
	i++;
	}

	intarr[i] = '\0';

	if (no_dec) {
	/* Currently needed only for single digit corepll ratios */
	mulconst = 10;
	decval = 0;
	} else {
	j = 0;
	i++; /* Skipping the decimal point */
	while ((strptr[i] >= '0') && (strptr[i] <= '9')) {
	decarr[j] = strptr[i];
	i++;
	j++;
	}

	decarr[j] = '\0';

	mulconst = 1;
	for (i = 0; i < j; i++)
	mulconst *= 10;
	decval = dectoul(decarr, NULL);
	}

	intval = dectoul(intarr, NULL);
	intval = intval * mulconst;

	return intval + decval;
	}

	static int pixis_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
	char *const argv[])
	{
	unsigned int i;
	char *p_cf = NULL;
	char *p_cf_sysclk = NULL;
	char *p_cf_corepll = NULL;
	char *p_cf_mpxpll = NULL;
	char *p_altbank = NULL;
	char *p_wd = NULL;
	int unknown_param = 0;

	/*
	* No args is a simple reset request.
	*/
	if (argc <= 1) {
	pixis_reset();
	/* not reached */
	}

	for (i = 1; i < argc; i++) {
	if (strcmp(argv[i], "cf") == 0) {
	p_cf = argv[i];
	if (i + 3 >= argc) {
	break;
	}
	p_cf_sysclk = argv[i+1];
	p_cf_corepll = argv[i+2];
	p_cf_mpxpll = argv[i+3];
	i += 3;
	continue;
	}

	if (strcmp(argv[i], "altbank") == 0) {
	p_altbank = argv[i];
	continue;
	}

	if (strcmp(argv[i], "wd") == 0) {
	p_wd = argv[i];
	continue;
	}

	unknown_param = 1;
	}

	/*
	* Check that cf has all required parms
	*/
	if ((p_cf && !(p_cf_sysclk && p_cf_corepll && p_cf_mpxpll))
	\|\| unknown_param) {
	#ifdef CONFIG_SYS_LONGHELP
	puts(cmdtp->help);
	putc('\n');
	#endif
	return 1;
	}

	/*
	* PIXIS seems to be sensitive to the ordering of
	* the registers that are touched.
	*/
	read_from_px_regs(0);

	if (p_altbank)
	read_from_px_regs_altbank(0);

	clear_altbank();

	/*
	* Clock configuration specified.
	*/
	if (p_cf) {
	unsigned long sysclk;
	unsigned long corepll;
	unsigned long mpxpll;

	sysclk = dectoul(p_cf_sysclk, NULL);
	corepll = strfractoint(p_cf_corepll);
	mpxpll = dectoul(p_cf_mpxpll, NULL);

	if (!(set_px_sysclk(sysclk)
	&& set_px_corepll(corepll)
	&& set_px_mpxpll(mpxpll))) {
	#ifdef CONFIG_SYS_LONGHELP
	puts(cmdtp->help);
	putc('\n');
	#endif
	return 1;
	}
	read_from_px_regs(1);
	}

	/*
	* Altbank specified
	*
	* NOTE CHANGE IN BEHAVIOR: previous code would default
	* to enabling watchdog if altbank is specified.
	* Now the watchdog must be enabled explicitly using 'wd'.
	*/
	if (p_altbank) {
	set_altbank();
	read_from_px_regs_altbank(1);
	}

	/*
	* Reset with watchdog specified.
	*/
	if (p_wd)
	set_px_go_with_watchdog();
	else
	set_px_go();

	/*
	* Shouldn't be reached.
	*/
	return 0;
	}


	U_BOOT_CMD(
	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
	"Reset the board using the FPGA sequencer",
	" pixis_reset\n"
	" pixis_reset [altbank]\n"
	" pixis_reset altbank wd\n"
	" pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
	" pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
	);