| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2014 Soeren Moch <smoch@web.de> |
| * |
| * Configuration settings for the TBS2910 MatrixARM board. |
| */ |
| |
| #ifndef __TBS2910_CONFIG_H |
| #define __TBS2910_CONFIG_H |
| |
| #include "mx6_common.h" |
| |
| /* General configuration */ |
| |
| /* Physical Memory Map */ |
| #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR |
| |
| #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CFG_SYS_BOOTMAPSZ 0x10000000 |
| |
| /* PCI */ |
| #ifdef CONFIG_CMD_PCI |
| #define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12) |
| #endif |
| |
| /* USB */ |
| #ifdef CONFIG_CMD_USB |
| #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #endif /* CONFIG_CMD_USB */ |
| |
| #define CFG_EXTRA_ENV_SETTINGS \ |
| BOOTENV \ |
| "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ |
| "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ |
| "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ |
| "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \ |
| "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \ |
| "${bootargs_mmc3}\0" \ |
| "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \ |
| "rdinit=/sbin/init enable_wait_mode=off\0" \ |
| "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \ |
| "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \ |
| "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \ |
| "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \ |
| "run bootargs_upd; " \ |
| "bootm 0x10800000 0x10d00000\0" \ |
| "console=ttymxc0\0" \ |
| "fan=gpio set 92\0" \ |
| "fdt_addr_r=0x18000000\0" \ |
| "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ |
| "kernel_addr_r=0x12000000\0" \ |
| "pxefile_addr_r=0x10100000\0" \ |
| "ramdisk_addr_r=0x18080000\0" \ |
| "scriptaddr=0x10000000\0" \ |
| "stderr=serial,vidconsole\0" \ |
| "stdin=serial,usbkbd\0" \ |
| "stdout=serial,vidconsole\0" |
| |
| /* Enable distro boot */ |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 0) \ |
| func(MMC, mmc, 1) \ |
| func(MMC, mmc, 2) \ |
| func(SATA, sata, 0) \ |
| func(USB, usb, 0) |
| |
| #include <config_distro_bootcmd.h> |
| |
| #endif /* __TBS2910_CONFIG_H * */ |