blob: e662774304599dd03946b8c6b34718d4b5b93cd0 [file] [log] [blame]
menu "Command line interface"
config HUSH_PARSER
bool "Use hush shell"
select SYS_HUSH_PARSER
help
This option enables the "hush" shell (from Busybox) as command line
interpreter, thus enabling powerful command line syntax like
if...then...else...fi conditionals or `&&' and '||'
constructs ("shell scripts").
If disabled, you get the old, much simpler behaviour with a somewhat
smaller memory footprint.
config SYS_HUSH_PARSER
bool
help
Backward compatibility.
comment "Commands"
menu "Info commands"
config CMD_BDI
bool "bdinfo"
help
Print board info
config CMD_CONSOLE
bool "coninfo"
help
Print console devices and information.
config CMD_LICENSE
bool "license"
help
Print GPL license text
endmenu
menu "Boot commands"
config CMD_BOOTD
bool "bootd"
help
Run the command stored in the environment "bootcmd", i.e.
"bootd" does the same thing as "run bootcmd".
config CMD_BOOTM
bool "bootm"
default y
help
Boot an application image from the memory.
config CMD_GO
bool "go"
default y
help
Start an application at a given address.
config CMD_RUN
bool "run"
help
Run the command in the given environment variable.
config CMD_IMI
bool "iminfo"
help
Print header information for application image.
config CMD_IMLS
bool "imls"
help
List all images found in flash
config CMD_XIMG
bool "imxtract"
help
Extract a part of a multi-image.
endmenu
menu "Environment commands"
config CMD_EXPORTENV
bool "env export"
default y
help
Export environments.
config CMD_IMPORTENV
bool "env import"
default y
help
Import environments.
config CMD_EDITENV
bool "editenv"
help
Edit environment variable.
config CMD_SAVEENV
bool "saveenv"
help
Run the command in the given environment variable.
endmenu
menu "Memory commands"
config CMD_MEMORY
bool "md, mm, nm, mw, cp, cmp, base, loop"
help
Memeory commands.
md - memory display
mm - memory modify (auto-incrementing address)
nm - memory modify (constant address)
mw - memory write (fill)
cp - memory copy
cmp - memory compare
base - print or set address offset
loop - initinite loop on address range
config CMD_CRC32
bool "crc32"
default y
help
Compute CRC32.
config LOOPW
bool "loopw"
help
Infinite write loop on address range
config CMD_MEMTEST
bool "memtest"
help
Simple RAM read/write test.
config CMD_MX_CYCLIC
bool "mdc, mwc"
help
mdc - memory display cyclic
mwc - memory write cyclic
config CMD_MEMINFO
bool "meminfo"
help
Display memory information.
endmenu
menu "Device access commands"
config CMD_DM
bool "dm - Access to driver model information"
depends on DM
default y
help
Provides access to driver model data structures and information,
such as a list of devices, list of uclasses and the state of each
device (e.g. activated). This is not required for operation, but
can be useful to see the state of driver model for debugging or
interest.
config CMD_DEMO
bool "demo - Demonstration commands for driver model"
depends on DM
help
Provides a 'demo' command which can be used to play around with
driver model. To use this properly you will need to enable one or
both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
Otherwise you will always get an empty list of devices. The demo
devices are defined in the sandbox device tree, so the easiest
option is to use sandbox and pass the -d point to sandbox's
u-boot.dtb file.
config CMD_LOADB
bool "loadb"
help
Load a binary file over serial line.
config CMD_LOADS
bool "loads"
help
Load an S-Record file over serial line
config CMD_FLASH
bool "flinfo, erase, protect"
help
NOR flash support.
flinfo - print FLASH memory information
erase - FLASH memory
protect - enable or disable FLASH write protection
config CMD_NAND
bool "nand"
help
NAND support.
config CMD_SPI
bool "sspi"
help
SPI utility command.
config CMD_I2C
bool "i2c"
help
I2C support.
config CMD_USB
bool "usb"
help
USB support.
config CMD_FPGA
bool "fpga"
help
FPGA support.
endmenu
menu "Shell scripting commands"
config CMD_ECHO
bool "echo"
help
Echo args to console
config CMD_ITEST
bool "itest"
help
Return true/false on integer compare.
config CMD_SOURCE
bool "source"
help
Run script from memory
endmenu
menu "Network commands"
config CMD_NET
bool "bootp, tftpboot"
help
Network commands.
bootp - boot image via network using BOOTP/TFTP protocol
tftpboot - boot image via network using TFTP protocol
config CMD_TFTPPUT
bool "tftp put"
help
TFTP put command, for uploading files to a server
config CMD_TFTPSRV
bool "tftpsrv"
help
Act as a TFTP server and boot the first received file
config CMD_RARP
bool "rarpboot"
help
Boot image via network using RARP/TFTP protocol
config CMD_DHCP
bool "dhcp"
help
Boot image via network using DHCP/TFTP protocol
config CMD_NFS
bool "nfs"
help
Boot image via network using NFS protocol.
config CMD_PING
bool "ping"
help
Send ICMP ECHO_REQUEST to network host
config CMD_CDP
bool "cdp"
help
Perform CDP network configuration
config CMD_SNTP
bool "sntp"
help
Synchronize RTC via network
config CMD_DNS
bool "dns"
help
Lookup the IP of a hostname
config CMD_DNS
bool "dns"
help
Lookup the IP of a hostname
config CMD_LINK_LOCAL
bool "linklocal"
help
Acquire a network IP address using the link-local protocol
endmenu
menu "Misc commands"
config CMD_TIME
bool "time"
help
Run commands and summarize execution time.
# TODO: rename to CMD_SLEEP
config CMD_MISC
bool "sleep"
help
Delay execution for some time
config CMD_TIMER
bool "timer"
help
Access the system timer.
config CMD_SETGETDCR
bool "getdcr, setdcr, getidcr, setidcr"
depends on 4xx
help
getdcr - Get an AMCC PPC 4xx DCR's value
setdcr - Set an AMCC PPC 4xx DCR's value
getidcr - Get a register value via indirect DCR addressing
setidcr - Set a register value via indirect DCR addressing
endmenu
endmenu