blob: 3a963c7973da5da0e37c0ac350ea7e4b1e2d59e1 [file] [log] [blame]
#!/bin/sh
#
# A wrapper script to adjust Kconfig for U-Boot
#
# Instead of touching various parts under the scripts/kconfig/ directory,
# pushing necessary adjustments into this single script would be better
# for code maintainance. All the make targets related to the configuration
# (make %config) should be invoked via this script.
# See doc/README.kconfig for further information of Kconfig.
#
# Copyright (C) 2014, Masahiro Yamada <yamada.m@jp.panasonic.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
set -e
# Set "DEBUG" enavironment variable to show debug messages
debug () {
if [ $DEBUG ]; then
echo "$@"
fi
}
# Useful shorthands
build () {
debug $progname: $MAKE -f $srctree/scripts/Makefile.build obj="$@"
$MAKE -f $srctree/scripts/Makefile.build obj="$@"
}
autoconf () {
debug $progname: $MAKE -f $srctree/scripts/Makefile.autoconf obj="$@"
$MAKE -f $srctree/scripts/Makefile.autoconf obj="$@"
}
# Make a configuration target
# Usage:
# run_make_config <target> <objdir>
# <target>: Make target such as "config", "menuconfig", "defconfig", etc.
# <objdir>: Target directory where the make command is run.
# Typically "", "spl", "tpl" for Normal, SPL, TPL, respectively.
run_make_config () {
target=$1
objdir=$2
# Linux expects defconfig files in arch/$(SRCARCH)/configs/ directory,
# but U-Boot has them in configs/ directory.
# Give SRCARCH=.. to fake scripts/kconfig/Makefile.
options="SRCARCH=.. KCONFIG_OBJDIR=$objdir"
if [ "$objdir" ]; then
options="$options KCONFIG_CONFIG=$objdir/$KCONFIG_CONFIG"
mkdir -p $objdir
fi
build scripts/kconfig $options $target
}
# Parse .config file to detect if CONFIG_SPL, CONFIG_TPL is enabled
# and returns:
# "" if neither CONFIG_SPL nor CONFIG_TPL is defined
# "spl" if CONFIG_SPL is defined but CONFIG_TPL is not
# "spl tpl" if both CONFIG_SPL and CONFIG_TPL are defined
get_enabled_subimages() {
if [ ! -r "$KCONFIG_CONFIG" ]; then
# This should never happen
echo "$progname: $KCONFIG_CONFIG not found" >&2
exit 1
fi
# CONFIG_SPL=y -> spl
# CONFIG_TPL=y -> tpl
sed -n -e 's/^CONFIG_SPL=y$/spl/p' -e 's/^CONFIG_TPL=y$/tpl/p' \
$KCONFIG_CONFIG
}
do_silentoldconfig () {
run_make_config silentoldconfig
subimages=$(get_enabled_subimages)
for obj in $subimages
do
mkdir -p $obj/include/config $obj/include/generated
run_make_config silentoldconfig $obj
done
# If the following part fails, include/config/auto.conf should be
# deleted so "make silentoldconfig" will be re-run on the next build.
autoconf include include/autoconf.mk include/autoconf.mk.dep || {
rm -f include/config/auto.conf
exit 1
}
# include/config.h has been updated after "make silentoldconfig".
# We need to touch include/config/auto.conf so it gets newer
# than include/config.h.
# Otherwise, 'make silentoldconfig' would be invoked twice.
touch include/config/auto.conf
for obj in $subimages
do
autoconf $obj/include $obj/include/autoconf.mk || {
rm -f include/config/auto.conf
exit 1
}
done
}
cleanup_after_defconfig () {
rm -f configs/.tmp_defconfig
# ignore 'Directory not empty' error
# without using non-POSIX option '--ignore-fail-on-non-empty'
rmdir arch configs 2>/dev/null || true
}
# Usage:
# do_board_defconfig <board>_defconfig
do_board_defconfig () {
defconfig_path=$srctree/configs/$1
tmp_defconfig_path=configs/.tmp_defconfig
if [ ! -r $defconfig_path ]; then
echo >&2 "***"
echo >&2 "*** Can't find default configuration \"configs/$1\"!"
echo >&2 "***"
exit 1
fi
mkdir -p arch configs
# defconfig for Normal:
# pick lines without prefixes and lines starting '+' prefix
# and rip the prefixes off.
sed -n -e '/^[+A-Z]*:/!p' -e 's/^+[A-Z]*://p' $defconfig_path \
> configs/.tmp_defconfig
run_make_config .tmp_defconfig || {
cleanup_after_defconfig
exit 1
}
for img in $(get_enabled_subimages)
do
symbol=$(echo $img | cut -c 1 | tr '[a-z]' '[A-Z]')
# defconfig for SPL, TPL:
# pick lines with 'S', 'T' prefix and rip the prefixes off
sed -n -e 's/^[+A-Z]*'$symbol'[A-Z]*://p' $defconfig_path \
> configs/.tmp_defconfig
run_make_config .tmp_defconfig $img || {
cleanup_after_defconfig
exit 1
}
done
cleanup_after_defconfig
}
do_defconfig () {
if [ "$KBUILD_DEFCONFIG" ]; then
do_board_defconfig $KBUILD_DEFCONFIG
echo "*** Default configuration is based on '$KBUILD_DEFCONFIG'"
else
run_make_config defconfig
fi
}
do_savedefconfig () {
if [ -r "$KCONFIG_CONFIG" ]; then
subimages=$(get_enabled_subimages)
else
subimages=
fi
run_make_config savedefconfig
output_lines=
# -r option is necessay because some string-type configs may include
# backslashes as an escape character
while read -r line
do
output_lines="$output_lines%$line"
done < defconfig
for img in $subimages
do
run_make_config savedefconfig $img
symbol=$(echo $img | cut -c 1 | tr '[a-z]' '[A-Z]')
unmatched=
while read -r line
do
tmp=
match=
# "# CONFIG_FOO is not set" should not be divided.
# Use "%" as a separator, instead of a whitespace.
# "%" is unlikely to appear in defconfig context.
save_IFS=$IFS
IFS=%
# coalesce common lines together
for i in $output_lines
do
case "$i" in
[+A-Z]*:$line)
tmp="$tmp%$unmatched"
i=$(echo "$i" | \
sed -e "s/^\([^:]*\)/\1$symbol/")
tmp="$tmp%$i"
match=1
;;
$line)
tmp="$tmp%$unmatched"
tmp="$tmp%+$symbol:$i"
match=1
;;
*)
tmp="$tmp%$i"
;;
esac
done
# Restore the default separator for the outer for loop.
IFS=$save_IFS
if [ "$match" ]; then
output_lines="$tmp"
unmatched=
else
unmatched="$unmatched%$symbol:$line"
fi
done < defconfig
output_lines="$output_lines%$unmatched"
done
rm -f defconfig
touch defconfig
save_IFS=$IFS
IFS=%
for line in $output_lines
do
case "$line" in
"")
# do not output blank lines
;;
*)
echo $line >> defconfig
;;
esac
done
IFS=$save_IFS
}
# Some sanity checks before running "make <objdir>/<target>",
# where <objdir> should be either "spl" or "tpl".
# Doing "make spl/menuconfig" etc. on a non-SPL board makes no sense.
# It should be allowed only when ".config" exists and "CONFIG_SPL" is enabled.
#
# Usage:
# check_enabled_sumbimage <objdir>/<target> <objdir>
check_enabled_subimage () {
case $2 in
spl|tpl) ;;
*)
echo >&2 "***"
echo >&2 "*** \"make $1\" is not supported."
echo >&2 "***"
exit 1
;;
esac
test -r "$KCONFIG_CONFIG" && get_enabled_subimages | grep -q $2 || {
config=CONFIG_$(echo $2 | tr '[a-z]' '[A-Z]')
echo >&2 "***"
echo >&2 "*** Create \"$KCONFIG_CONFIG\" with \"$config\" enabled"
echo >&2 "*** before \"make $1\"."
echo >&2 "***"
exit 1
}
}
# Usage:
# do_others <objdir>/<target>
# The field "<objdir>/" is typically empy, "spl/", "tpl/" for Normal, SPL, TPL,
# respectively.
# The field "<target>" is a configuration target such as "config",
# "menuconfig", etc.
do_others () {
target=${1##*/}
if [ "$target" = "$1" ]; then
objdir=
else
objdir=${1%/*}
check_enabled_subimage $1 $objdir
fi
run_make_config $target $objdir
}
progname=$(basename $0)
target=$1
case $target in
*_defconfig)
do_board_defconfig $target;;
*_config)
# backward compatibility
do_board_defconfig ${target%_config}_defconfig;;
silentoldconfig)
do_silentoldconfig;;
defconfig)
do_defconfig;;
savedefconfig)
do_savedefconfig;;
*)
do_others $target;;
esac