| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2015 Vishnu Patekar <vishnupatekar0510@gmail.com> |
| * |
| * X-Powers AXP818 Power Management IC driver |
| */ |
| |
| #define AXP818_CHIP_ID 0x03 |
| |
| #define AXP818_OUTPUT_CTRL1 0x10 |
| #define AXP818_OUTPUT_CTRL1_DCDC1_EN (1 << 0) |
| #define AXP818_OUTPUT_CTRL1_DCDC2_EN (1 << 1) |
| #define AXP818_OUTPUT_CTRL1_DCDC3_EN (1 << 2) |
| #define AXP818_OUTPUT_CTRL1_DCDC4_EN (1 << 3) |
| #define AXP818_OUTPUT_CTRL1_DCDC5_EN (1 << 4) |
| #define AXP818_OUTPUT_CTRL1_DCDC6_EN (1 << 5) |
| #define AXP818_OUTPUT_CTRL1_DCDC7_EN (1 << 6) |
| #define AXP818_OUTPUT_CTRL2 0x12 |
| #define AXP818_OUTPUT_CTRL2_ELDO1_EN (1 << 0) |
| #define AXP818_OUTPUT_CTRL2_ELDO2_EN (1 << 1) |
| #define AXP818_OUTPUT_CTRL2_ELDO3_EN (1 << 2) |
| #define AXP818_OUTPUT_CTRL2_DLDO1_EN (1 << 3) |
| #define AXP818_OUTPUT_CTRL2_DLDO2_EN (1 << 4) |
| #define AXP818_OUTPUT_CTRL2_DLDO3_EN (1 << 5) |
| #define AXP818_OUTPUT_CTRL2_DLDO4_EN (1 << 6) |
| #define AXP818_OUTPUT_CTRL2_SW_EN (1 << 7) |
| #define AXP818_OUTPUT_CTRL3 0x13 |
| #define AXP818_OUTPUT_CTRL3_FLDO1_EN (1 << 2) |
| #define AXP818_OUTPUT_CTRL3_FLDO2_EN (1 << 3) |
| #define AXP818_OUTPUT_CTRL3_FLDO3_EN (1 << 4) |
| #define AXP818_OUTPUT_CTRL3_ALDO1_EN (1 << 5) |
| #define AXP818_OUTPUT_CTRL3_ALDO2_EN (1 << 6) |
| #define AXP818_OUTPUT_CTRL3_ALDO3_EN (1 << 7) |
| |
| #define AXP818_DLDO1_CTRL 0x15 |
| #define AXP818_DLDO2_CTRL 0x16 |
| #define AXP818_DLDO3_CTRL 0x17 |
| #define AXP818_DLDO4_CTRL 0x18 |
| #define AXP818_ELDO1_CTRL 0x19 |
| #define AXP818_ELDO2_CTRL 0x1a |
| #define AXP818_ELDO3_CTRL 0x1b |
| #define AXP818_FLDO1_CTRL 0x1c |
| #define AXP818_FLDO2_3_CTRL 0x1d |
| #define AXP818_FLDO2_3_CTRL_FLDO3_VOL (1 << 4) |
| #define AXP818_DCDC1_CTRL 0x20 |
| #define AXP818_DCDC2_CTRL 0x21 |
| #define AXP818_DCDC3_CTRL 0x22 |
| #define AXP818_DCDC4_CTRL 0x23 |
| #define AXP818_DCDC5_CTRL 0x24 |
| #define AXP818_DCDC6_CTRL 0x25 |
| #define AXP818_DCDC7_CTRL 0x26 |
| |
| #define AXP818_ALDO1_CTRL 0x28 |
| #define AXP818_ALDO2_CTRL 0x29 |
| #define AXP818_ALDO3_CTRL 0x2a |
| |
| #define AXP818_SHUTDOWN 0x32 |
| #define AXP818_SHUTDOWN_POWEROFF (1 << 7) |
| |
| /* For axp_gpio.c */ |
| #ifdef CONFIG_AXP818_POWER |
| #define AXP_POWER_STATUS 0x00 |
| #define AXP_POWER_STATUS_ALDO_IN BIT(0) |
| #define AXP_VBUS_IPSOUT 0x30 |
| #define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2) |
| #define AXP_MISC_CTRL 0x8f |
| #define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4) |
| #define AXP_GPIO0_CTRL 0x90 |
| #define AXP_GPIO1_CTRL 0x92 |
| #define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ |
| #define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ |
| #define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ |
| #define AXP_GPIO_STATE 0x94 |
| #define AXP_GPIO_STATE_OFFSET 0 |
| #endif |