| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright (c) 2016, NVIDIA CORPORATION. |
| */ |
| |
| #ifndef _POWER_DOMAIN_H |
| #define _POWER_DOMAIN_H |
| |
| /** |
| * A power domain is a portion of an SoC or chip that is powered by a |
| * switchable source of power. In many cases, software has control over the |
| * power domain, and can turn the power source on or off. This is typically |
| * done to save power by powering off unused devices, or to enable software |
| * sequencing of initial powerup at boot. This API provides a means for |
| * drivers to turn power domains on and off. |
| * |
| * A driver that implements UCLASS_POWER_DOMAIN is a power domain controller or |
| * provider. A controller will often implement multiple separate power domains, |
| * since the hardware it manages often has this capability. |
| * power-domain-uclass.h describes the interface which power domain controllers |
| * must implement. |
| * |
| * Depending on the power domain controller hardware, changing the state of a |
| * power domain may require performing related operations on other resources. |
| * For example, some power domains may require certain clocks to be enabled |
| * whenever the power domain is powered on, or during the time when the power |
| * domain is transitioning state. These details are implementation-specific |
| * and should ideally be encapsulated entirely within the provider driver, or |
| * configured through mechanisms (e.g. device tree) that do not require client |
| * drivers to provide extra configuration information. |
| * |
| * Power domain consumers/clients are the drivers for HW modules within the |
| * power domain. This header file describes the API used by those drivers. |
| * |
| * In many cases, a single complex IO controller (e.g. a PCIe controller) will |
| * be the sole logic contained within a power domain. In such cases, it is |
| * logical for the relevant device driver to directly control that power |
| * domain. In other cases, multiple controllers, each with their own driver, |
| * may be contained in a single power domain. Any logic require to co-ordinate |
| * between drivers for these multiple controllers is beyond the scope of this |
| * API at present. Equally, this API does not define or implement any policy |
| * by which power domains are managed. |
| */ |
| |
| struct udevice; |
| |
| /** |
| * struct power_domain - A handle to (allowing control of) a single power domain. |
| * |
| * Clients provide storage for power domain handles. The content of the |
| * structure is managed solely by the power domain API and power domain |
| * drivers. A power domain struct is initialized by "get"ing the power domain |
| * struct. The power domain struct is passed to all other power domain APIs to |
| * identify which power domain to operate upon. |
| * |
| * @dev: The device which implements the power domain. |
| * @id: The power domain ID within the provider. |
| * @priv: Private data corresponding to each power domain. |
| */ |
| struct power_domain { |
| struct udevice *dev; |
| unsigned long id; |
| void *priv; |
| }; |
| |
| /** |
| * power_domain_get - Get/request the power domain for a device. |
| * |
| * This looks up and requests a power domain. Each device is assumed to have |
| * a single (or, at least one) power domain associated with it somehow, and |
| * that domain, or the first/default domain. The mapping of client device to |
| * provider power domain may be via device-tree properties, board-provided |
| * mapping tables, or some other mechanism. |
| * |
| * @dev: The client device. |
| * @power_domain A pointer to a power domain struct to initialize. |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int power_domain_get(struct udevice *dev, struct power_domain *power_domain); |
| #else |
| static inline |
| int power_domain_get(struct udevice *dev, struct power_domain *power_domain) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| /** |
| * power_domain_get_by_index - Get the indexed power domain for a device. |
| * |
| * @dev: The client device. |
| * @power_domain: A pointer to a power domain struct to initialize. |
| * @index: Power domain index to be powered on. |
| * |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int power_domain_get_by_index(struct udevice *dev, |
| struct power_domain *power_domain, int index); |
| #else |
| static inline |
| int power_domain_get_by_index(struct udevice *dev, |
| struct power_domain *power_domain, int index) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| /** |
| * power_domain_free - Free a previously requested power domain. |
| * |
| * @power_domain: A power domain struct that was previously successfully |
| * requested by power_domain_get(). |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int power_domain_free(struct power_domain *power_domain); |
| #else |
| static inline int power_domain_free(struct power_domain *power_domain) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| /** |
| * power_domain_on - Enable power to a power domain. |
| * |
| * @power_domain: A power domain struct that was previously successfully |
| * requested by power_domain_get(). |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int power_domain_on(struct power_domain *power_domain); |
| #else |
| static inline int power_domain_on(struct power_domain *power_domain) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| /** |
| * power_domain_off - Disable power to a power domain. |
| * |
| * @power_domain: A power domain struct that was previously successfully |
| * requested by power_domain_get(). |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int power_domain_off(struct power_domain *power_domain); |
| #else |
| static inline int power_domain_off(struct power_domain *power_domain) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| /** |
| * dev_power_domain_on - Enable power domains for a device . |
| * |
| * @dev: The client device. |
| * |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(OF_REAL) && CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int dev_power_domain_on(struct udevice *dev); |
| #else |
| static inline int dev_power_domain_on(struct udevice *dev) |
| { |
| return 0; |
| } |
| #endif |
| |
| /** |
| * dev_power_domain_off - Disable power domains for a device . |
| * |
| * @dev: The client device. |
| * |
| * Return: 0 if OK, or a negative error code. |
| */ |
| #if CONFIG_IS_ENABLED(OF_REAL) && CONFIG_IS_ENABLED(POWER_DOMAIN) |
| int dev_power_domain_off(struct udevice *dev); |
| #else |
| static inline int dev_power_domain_off(struct udevice *dev) |
| { |
| return 0; |
| } |
| #endif |
| |
| #endif |