| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Xilinx Zynq MPSoC Firmware driver |
| * |
| * Copyright (C) 2018-2019 Xilinx, Inc. |
| */ |
| |
| #ifndef _ZYNQMP_FIRMWARE_H_ |
| #define _ZYNQMP_FIRMWARE_H_ |
| |
| enum pm_api_id { |
| PM_GET_API_VERSION = 1, |
| PM_SET_CONFIGURATION = 2, |
| PM_GET_NODE_STATUS = 3, |
| PM_GET_OPERATING_CHARACTERISTIC = 4, |
| PM_REGISTER_NOTIFIER = 5, |
| /* API for suspending */ |
| PM_REQUEST_SUSPEND = 6, |
| PM_SELF_SUSPEND = 7, |
| PM_FORCE_POWERDOWN = 8, |
| PM_ABORT_SUSPEND = 9, |
| PM_REQUEST_WAKEUP = 10, |
| PM_SET_WAKEUP_SOURCE = 11, |
| PM_SYSTEM_SHUTDOWN = 12, |
| PM_REQUEST_NODE = 13, |
| PM_RELEASE_NODE = 14, |
| PM_SET_REQUIREMENT = 15, |
| PM_SET_MAX_LATENCY = 16, |
| /* Direct control API functions: */ |
| PM_RESET_ASSERT = 17, |
| PM_RESET_GET_STATUS = 18, |
| PM_MMIO_WRITE = 19, |
| PM_MMIO_READ = 20, |
| PM_PM_INIT_FINALIZE = 21, |
| PM_FPGA_LOAD = 22, |
| PM_FPGA_GET_STATUS = 23, |
| PM_GET_CHIPID = 24, |
| /* ID 25 is been used by U-boot to process secure boot images */ |
| /* Secure library generic API functions */ |
| PM_SECURE_SHA = 26, |
| PM_SECURE_RSA = 27, |
| PM_PINCTRL_REQUEST = 28, |
| PM_PINCTRL_RELEASE = 29, |
| PM_PINCTRL_GET_FUNCTION = 30, |
| PM_PINCTRL_SET_FUNCTION = 31, |
| PM_PINCTRL_CONFIG_PARAM_GET = 32, |
| PM_PINCTRL_CONFIG_PARAM_SET = 33, |
| PM_IOCTL = 34, |
| PM_QUERY_DATA = 35, |
| PM_CLOCK_ENABLE = 36, |
| PM_CLOCK_DISABLE = 37, |
| PM_CLOCK_GETSTATE = 38, |
| PM_CLOCK_SETDIVIDER = 39, |
| PM_CLOCK_GETDIVIDER = 40, |
| PM_CLOCK_SETRATE = 41, |
| PM_CLOCK_GETRATE = 42, |
| PM_CLOCK_SETPARENT = 43, |
| PM_CLOCK_GETPARENT = 44, |
| PM_SECURE_IMAGE = 45, |
| PM_FPGA_READ = 46, |
| PM_SECURE_AES = 47, |
| PM_CLOCK_PLL_GETPARAM = 49, |
| /* PM_REGISTER_ACCESS API */ |
| PM_REGISTER_ACCESS = 52, |
| PM_EFUSE_ACCESS = 53, |
| PM_FEATURE_CHECK = 63, |
| PM_API_MAX, |
| }; |
| |
| enum pm_node_id { |
| NODE_UNKNOWN = 0, |
| NODE_APU = 1, |
| NODE_APU_0 = 2, |
| NODE_APU_1 = 3, |
| NODE_APU_2 = 4, |
| NODE_APU_3 = 5, |
| NODE_RPU = 6, |
| NODE_RPU_0 = 7, |
| NODE_RPU_1 = 8, |
| NODE_PLD = 9, |
| NODE_FPD = 10, |
| NODE_OCM_BANK_0 = 11, |
| NODE_OCM_BANK_1 = 12, |
| NODE_OCM_BANK_2 = 13, |
| NODE_OCM_BANK_3 = 14, |
| NODE_TCM_0_A = 15, |
| NODE_TCM_0_B = 16, |
| NODE_TCM_1_A = 17, |
| NODE_TCM_1_B = 18, |
| NODE_L2 = 19, |
| NODE_GPU_PP_0 = 20, |
| NODE_GPU_PP_1 = 21, |
| NODE_USB_0 = 22, |
| NODE_USB_1 = 23, |
| NODE_TTC_0 = 24, |
| NODE_TTC_1 = 25, |
| NODE_TTC_2 = 26, |
| NODE_TTC_3 = 27, |
| NODE_SATA = 28, |
| NODE_ETH_0 = 29, |
| NODE_ETH_1 = 30, |
| NODE_ETH_2 = 31, |
| NODE_ETH_3 = 32, |
| NODE_UART_0 = 33, |
| NODE_UART_1 = 34, |
| NODE_SPI_0 = 35, |
| NODE_SPI_1 = 36, |
| NODE_I2C_0 = 37, |
| NODE_I2C_1 = 38, |
| NODE_SD_0 = 39, |
| NODE_SD_1 = 40, |
| NODE_DP = 41, |
| NODE_GDMA = 42, |
| NODE_ADMA = 43, |
| NODE_NAND = 44, |
| NODE_QSPI = 45, |
| NODE_GPIO = 46, |
| NODE_CAN_0 = 47, |
| NODE_CAN_1 = 48, |
| NODE_EXTERN = 49, |
| NODE_APLL = 50, |
| NODE_VPLL = 51, |
| NODE_DPLL = 52, |
| NODE_RPLL = 53, |
| NODE_IOPLL = 54, |
| NODE_DDR = 55, |
| NODE_IPI_APU = 56, |
| NODE_IPI_RPU_0 = 57, |
| NODE_GPU = 58, |
| NODE_PCIE = 59, |
| NODE_PCAP = 60, |
| NODE_RTC = 61, |
| NODE_LPD = 62, |
| NODE_VCU = 63, |
| NODE_IPI_RPU_1 = 64, |
| NODE_IPI_PL_0 = 65, |
| NODE_IPI_PL_1 = 66, |
| NODE_IPI_PL_2 = 67, |
| NODE_IPI_PL_3 = 68, |
| NODE_PL = 69, |
| NODE_GEM_TSU = 70, |
| NODE_SWDT_0 = 71, |
| NODE_SWDT_1 = 72, |
| NODE_CSU = 73, |
| NODE_PJTAG = 74, |
| NODE_TRACE = 75, |
| NODE_TESTSCAN = 76, |
| NODE_PMU = 77, |
| NODE_MAX = 78, |
| }; |
| |
| enum tap_delay_type { |
| PM_TAPDELAY_INPUT = 0, |
| PM_TAPDELAY_OUTPUT = 1, |
| }; |
| |
| enum dll_reset_type { |
| PM_DLL_RESET_ASSERT = 0, |
| PM_DLL_RESET_RELEASE = 1, |
| PM_DLL_RESET_PULSE = 2, |
| }; |
| |
| enum pm_query_id { |
| PM_QID_INVALID = 0, |
| PM_QID_CLOCK_GET_NAME = 1, |
| PM_QID_CLOCK_GET_TOPOLOGY = 2, |
| PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS = 3, |
| PM_QID_CLOCK_GET_PARENTS = 4, |
| PM_QID_CLOCK_GET_ATTRIBUTES = 5, |
| PM_QID_PINCTRL_GET_NUM_PINS = 6, |
| PM_QID_PINCTRL_GET_NUM_FUNCTIONS = 7, |
| PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS = 8, |
| PM_QID_PINCTRL_GET_FUNCTION_NAME = 9, |
| PM_QID_PINCTRL_GET_FUNCTION_GROUPS = 10, |
| PM_QID_PINCTRL_GET_PIN_GROUPS = 11, |
| PM_QID_CLOCK_GET_NUM_CLOCKS = 12, |
| PM_QID_CLOCK_GET_MAX_DIVISOR = 13, |
| }; |
| |
| enum pm_pinctrl_config_param { |
| PM_PINCTRL_CONFIG_SLEW_RATE = 0, |
| PM_PINCTRL_CONFIG_BIAS_STATUS = 1, |
| PM_PINCTRL_CONFIG_PULL_CTRL = 2, |
| PM_PINCTRL_CONFIG_SCHMITT_CMOS = 3, |
| PM_PINCTRL_CONFIG_DRIVE_STRENGTH = 4, |
| PM_PINCTRL_CONFIG_VOLTAGE_STATUS = 5, |
| PM_PINCTRL_CONFIG_TRI_STATE = 6, |
| PM_PINCTRL_CONFIG_MAX = 7, |
| }; |
| |
| enum pm_pinctrl_slew_rate { |
| PM_PINCTRL_SLEW_RATE_FAST = 0, |
| PM_PINCTRL_SLEW_RATE_SLOW = 1, |
| }; |
| |
| enum pm_pinctrl_bias_status { |
| PM_PINCTRL_BIAS_DISABLE = 0, |
| PM_PINCTRL_BIAS_ENABLE = 1, |
| }; |
| |
| enum pm_pinctrl_pull_ctrl { |
| PM_PINCTRL_BIAS_PULL_DOWN = 0, |
| PM_PINCTRL_BIAS_PULL_UP = 1, |
| }; |
| |
| enum pm_pinctrl_schmitt_cmos { |
| PM_PINCTRL_INPUT_TYPE_CMOS = 0, |
| PM_PINCTRL_INPUT_TYPE_SCHMITT = 1, |
| }; |
| |
| enum pm_pinctrl_drive_strength { |
| PM_PINCTRL_DRIVE_STRENGTH_2MA = 0, |
| PM_PINCTRL_DRIVE_STRENGTH_4MA = 1, |
| PM_PINCTRL_DRIVE_STRENGTH_8MA = 2, |
| PM_PINCTRL_DRIVE_STRENGTH_12MA = 3, |
| }; |
| |
| enum pm_pinctrl_tri_state { |
| PM_PINCTRL_TRI_STATE_DISABLE = 0, |
| PM_PINCTRL_TRI_STATE_ENABLE = 1, |
| }; |
| |
| enum zynqmp_pm_reset_action { |
| PM_RESET_ACTION_RELEASE = 0, |
| PM_RESET_ACTION_ASSERT = 1, |
| PM_RESET_ACTION_PULSE = 2, |
| }; |
| |
| enum zynqmp_pm_reset { |
| ZYNQMP_PM_RESET_START = 1000, |
| ZYNQMP_PM_RESET_PCIE_CFG = ZYNQMP_PM_RESET_START, |
| ZYNQMP_PM_RESET_PCIE_BRIDGE = 1001, |
| ZYNQMP_PM_RESET_PCIE_CTRL = 1002, |
| ZYNQMP_PM_RESET_DP = 1003, |
| ZYNQMP_PM_RESET_SWDT_CRF = 1004, |
| ZYNQMP_PM_RESET_AFI_FM5 = 1005, |
| ZYNQMP_PM_RESET_AFI_FM4 = 1006, |
| ZYNQMP_PM_RESET_AFI_FM3 = 1007, |
| ZYNQMP_PM_RESET_AFI_FM2 = 1008, |
| ZYNQMP_PM_RESET_AFI_FM1 = 1009, |
| ZYNQMP_PM_RESET_AFI_FM0 = 1010, |
| ZYNQMP_PM_RESET_GDMA = 1011, |
| ZYNQMP_PM_RESET_GPU_PP1 = 1012, |
| ZYNQMP_PM_RESET_GPU_PP0 = 1013, |
| ZYNQMP_PM_RESET_GPU = 1014, |
| ZYNQMP_PM_RESET_GT = 1015, |
| ZYNQMP_PM_RESET_SATA = 1016, |
| ZYNQMP_PM_RESET_ACPU3_PWRON = 1017, |
| ZYNQMP_PM_RESET_ACPU2_PWRON = 1018, |
| ZYNQMP_PM_RESET_ACPU1_PWRON = 1019, |
| ZYNQMP_PM_RESET_ACPU0_PWRON = 1020, |
| ZYNQMP_PM_RESET_APU_L2 = 1021, |
| ZYNQMP_PM_RESET_ACPU3 = 1022, |
| ZYNQMP_PM_RESET_ACPU2 = 1023, |
| ZYNQMP_PM_RESET_ACPU1 = 1024, |
| ZYNQMP_PM_RESET_ACPU0 = 1025, |
| ZYNQMP_PM_RESET_DDR = 1026, |
| ZYNQMP_PM_RESET_APM_FPD = 1027, |
| ZYNQMP_PM_RESET_SOFT = 1028, |
| ZYNQMP_PM_RESET_GEM0 = 1029, |
| ZYNQMP_PM_RESET_GEM1 = 1030, |
| ZYNQMP_PM_RESET_GEM2 = 1031, |
| ZYNQMP_PM_RESET_GEM3 = 1032, |
| ZYNQMP_PM_RESET_QSPI = 1033, |
| ZYNQMP_PM_RESET_UART0 = 1034, |
| ZYNQMP_PM_RESET_UART1 = 1035, |
| ZYNQMP_PM_RESET_SPI0 = 1036, |
| ZYNQMP_PM_RESET_SPI1 = 1037, |
| ZYNQMP_PM_RESET_SDIO0 = 1038, |
| ZYNQMP_PM_RESET_SDIO1 = 1039, |
| ZYNQMP_PM_RESET_CAN0 = 1040, |
| ZYNQMP_PM_RESET_CAN1 = 1041, |
| ZYNQMP_PM_RESET_I2C0 = 1042, |
| ZYNQMP_PM_RESET_I2C1 = 1043, |
| ZYNQMP_PM_RESET_TTC0 = 1044, |
| ZYNQMP_PM_RESET_TTC1 = 1045, |
| ZYNQMP_PM_RESET_TTC2 = 1046, |
| ZYNQMP_PM_RESET_TTC3 = 1047, |
| ZYNQMP_PM_RESET_SWDT_CRL = 1048, |
| ZYNQMP_PM_RESET_NAND = 1049, |
| ZYNQMP_PM_RESET_ADMA = 1050, |
| ZYNQMP_PM_RESET_GPIO = 1051, |
| ZYNQMP_PM_RESET_IOU_CC = 1052, |
| ZYNQMP_PM_RESET_TIMESTAMP = 1053, |
| ZYNQMP_PM_RESET_RPU_R50 = 1054, |
| ZYNQMP_PM_RESET_RPU_R51 = 1055, |
| ZYNQMP_PM_RESET_RPU_AMBA = 1056, |
| ZYNQMP_PM_RESET_OCM = 1057, |
| ZYNQMP_PM_RESET_RPU_PGE = 1058, |
| ZYNQMP_PM_RESET_USB0_CORERESET = 1059, |
| ZYNQMP_PM_RESET_USB1_CORERESET = 1060, |
| ZYNQMP_PM_RESET_USB0_HIBERRESET = 1061, |
| ZYNQMP_PM_RESET_USB1_HIBERRESET = 1062, |
| ZYNQMP_PM_RESET_USB0_APB = 1063, |
| ZYNQMP_PM_RESET_USB1_APB = 1064, |
| ZYNQMP_PM_RESET_IPI = 1065, |
| ZYNQMP_PM_RESET_APM_LPD = 1066, |
| ZYNQMP_PM_RESET_RTC = 1067, |
| ZYNQMP_PM_RESET_SYSMON = 1068, |
| ZYNQMP_PM_RESET_AFI_FM6 = 1069, |
| ZYNQMP_PM_RESET_LPD_SWDT = 1070, |
| ZYNQMP_PM_RESET_FPD = 1071, |
| ZYNQMP_PM_RESET_RPU_DBG1 = 1072, |
| ZYNQMP_PM_RESET_RPU_DBG0 = 1073, |
| ZYNQMP_PM_RESET_DBG_LPD = 1074, |
| ZYNQMP_PM_RESET_DBG_FPD = 1075, |
| ZYNQMP_PM_RESET_APLL = 1076, |
| ZYNQMP_PM_RESET_DPLL = 1077, |
| ZYNQMP_PM_RESET_VPLL = 1078, |
| ZYNQMP_PM_RESET_IOPLL = 1079, |
| ZYNQMP_PM_RESET_RPLL = 1080, |
| ZYNQMP_PM_RESET_GPO3_PL_0 = 1081, |
| ZYNQMP_PM_RESET_GPO3_PL_1 = 1082, |
| ZYNQMP_PM_RESET_GPO3_PL_2 = 1083, |
| ZYNQMP_PM_RESET_GPO3_PL_3 = 1084, |
| ZYNQMP_PM_RESET_GPO3_PL_4 = 1085, |
| ZYNQMP_PM_RESET_GPO3_PL_5 = 1086, |
| ZYNQMP_PM_RESET_GPO3_PL_6 = 1087, |
| ZYNQMP_PM_RESET_GPO3_PL_7 = 1088, |
| ZYNQMP_PM_RESET_GPO3_PL_8 = 1089, |
| ZYNQMP_PM_RESET_GPO3_PL_9 = 1090, |
| ZYNQMP_PM_RESET_GPO3_PL_10 = 1091, |
| ZYNQMP_PM_RESET_GPO3_PL_11 = 1092, |
| ZYNQMP_PM_RESET_GPO3_PL_12 = 1093, |
| ZYNQMP_PM_RESET_GPO3_PL_13 = 1094, |
| ZYNQMP_PM_RESET_GPO3_PL_14 = 1095, |
| ZYNQMP_PM_RESET_GPO3_PL_15 = 1096, |
| ZYNQMP_PM_RESET_GPO3_PL_16 = 1097, |
| ZYNQMP_PM_RESET_GPO3_PL_17 = 1098, |
| ZYNQMP_PM_RESET_GPO3_PL_18 = 1099, |
| ZYNQMP_PM_RESET_GPO3_PL_19 = 1100, |
| ZYNQMP_PM_RESET_GPO3_PL_20 = 1101, |
| ZYNQMP_PM_RESET_GPO3_PL_21 = 1102, |
| ZYNQMP_PM_RESET_GPO3_PL_22 = 1103, |
| ZYNQMP_PM_RESET_GPO3_PL_23 = 1104, |
| ZYNQMP_PM_RESET_GPO3_PL_24 = 1105, |
| ZYNQMP_PM_RESET_GPO3_PL_25 = 1106, |
| ZYNQMP_PM_RESET_GPO3_PL_26 = 1107, |
| ZYNQMP_PM_RESET_GPO3_PL_27 = 1108, |
| ZYNQMP_PM_RESET_GPO3_PL_28 = 1109, |
| ZYNQMP_PM_RESET_GPO3_PL_29 = 1110, |
| ZYNQMP_PM_RESET_GPO3_PL_30 = 1111, |
| ZYNQMP_PM_RESET_GPO3_PL_31 = 1112, |
| ZYNQMP_PM_RESET_RPU_LS = 1113, |
| ZYNQMP_PM_RESET_PS_ONLY = 1114, |
| ZYNQMP_PM_RESET_PL = 1115, |
| ZYNQMP_PM_RESET_PS_PL0 = 1116, |
| ZYNQMP_PM_RESET_PS_PL1 = 1117, |
| ZYNQMP_PM_RESET_PS_PL2 = 1118, |
| ZYNQMP_PM_RESET_PS_PL3 = 1119, |
| ZYNQMP_PM_RESET_END = ZYNQMP_PM_RESET_PS_PL3 |
| }; |
| |
| enum pm_ioctl_id { |
| IOCTL_GET_RPU_OPER_MODE = 0, |
| IOCTL_SET_RPU_OPER_MODE = 1, |
| IOCTL_RPU_BOOT_ADDR_CONFIG = 2, |
| IOCTL_TCM_COMB_CONFIG = 3, |
| IOCTL_SET_TAPDELAY_BYPASS = 4, |
| IOCTL_SET_SGMII_MODE = 5, |
| IOCTL_SD_DLL_RESET = 6, |
| IOCTL_SET_SD_TAPDELAY = 7, |
| IOCTL_SET_PLL_FRAC_MODE = 8, |
| IOCTL_GET_PLL_FRAC_MODE = 9, |
| IOCTL_SET_PLL_FRAC_DATA = 10, |
| IOCTL_GET_PLL_FRAC_DATA = 11, |
| IOCTL_WRITE_GGS = 12, |
| IOCTL_READ_GGS = 13, |
| IOCTL_WRITE_PGGS = 14, |
| IOCTL_READ_PGGS = 15, |
| /* IOCTL for ULPI reset */ |
| IOCTL_ULPI_RESET = 16, |
| /* Set healthy bit value*/ |
| IOCTL_SET_BOOT_HEALTH_STATUS = 17, |
| IOCTL_AFI = 18, |
| /* Probe counter read/write */ |
| IOCTL_PROBE_COUNTER_READ = 19, |
| IOCTL_PROBE_COUNTER_WRITE = 20, |
| IOCTL_OSPI_MUX_SELECT = 21, |
| /* IOCTL for USB power request */ |
| IOCTL_USB_SET_STATE = 22, |
| /* IOCTL to get last reset reason */ |
| IOCTL_GET_LAST_RESET_REASON = 23, |
| /* AIE ISR Clear */ |
| IOCTL_AIE_ISR_CLEAR = 24, |
| /* Register SGI to ATF */ |
| IOCTL_REGISTER_SGI = 25, |
| /* Runtime feature configuration */ |
| IOCTL_SET_FEATURE_CONFIG = 26, |
| IOCTL_GET_FEATURE_CONFIG = 27, |
| /* IOCTL for Secure Read/Write Interface */ |
| IOCTL_READ_REG = 28, |
| IOCTL_MASK_WRITE_REG = 29, |
| /* Dynamic SD/GEM/USB configuration */ |
| IOCTL_SET_SD_CONFIG = 30, |
| IOCTL_SET_GEM_CONFIG = 31, |
| IOCTL_SET_USB_CONFIG = 32, |
| /* AIE/AIEML Operations */ |
| IOCTL_AIE_OPS = 33, |
| /* IOCTL to get default/current QoS */ |
| IOCTL_GET_QOS = 34, |
| }; |
| |
| enum pm_sd_config_type { |
| SD_CONFIG_EMMC_SEL = 1, /* To set SD_EMMC_SEL in CTRL_REG_SD */ |
| SD_CONFIG_BASECLK = 2, /* To set SD_BASECLK in SD_CONFIG_REG1 */ |
| SD_CONFIG_8BIT = 3, /* To set SD_8BIT in SD_CONFIG_REG2 */ |
| SD_CONFIG_FIXED = 4, /* To set fixed config registers */ |
| }; |
| |
| #define PM_SIP_SVC 0xc2000000 |
| |
| #define ZYNQMP_PM_VERSION_MAJOR 1 |
| #define ZYNQMP_PM_VERSION_MINOR 0 |
| #define ZYNQMP_PM_VERSION_MAJOR_SHIFT 16 |
| #define ZYNQMP_PM_VERSION_MINOR_MASK 0xFFFF |
| |
| #define ZYNQMP_PM_VERSION \ |
| ((ZYNQMP_PM_VERSION_MAJOR << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | \ |
| ZYNQMP_PM_VERSION_MINOR) |
| |
| #define ZYNQMP_PM_VERSION_INVALID ~0 |
| |
| #define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0) |
| |
| /* |
| * Return payload size |
| * Not every firmware call expects the same amount of return bytes, however the |
| * firmware driver always copies 5 bytes from RX buffer to the ret_payload |
| * buffer. Therefore allocating with this defined value is recommended to avoid |
| * overflows. |
| */ |
| #define PAYLOAD_ARG_CNT 5U |
| |
| unsigned int zynqmp_firmware_version(void); |
| int zynqmp_pmufw_node(u32 id); |
| int zynqmp_pmufw_config_close(void); |
| void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); |
| int xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, |
| u32 arg3, u32 *ret_payload); |
| int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value); |
| int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id); |
| |
| /* Type of Config Object */ |
| #define PM_CONFIG_OBJECT_TYPE_BASE 0x1U |
| #define PM_CONFIG_OBJECT_TYPE_OVERLAY 0x2U |
| |
| /* Section Id */ |
| #define PM_CONFIG_SLAVE_SECTION_ID 0x102U |
| #define PM_CONFIG_SET_CONFIG_SECTION_ID 0x107U |
| |
| /* Flag Option */ |
| #define PM_SLAVE_FLAG_IS_SHAREABLE 0x1U |
| #define PM_MASTER_USING_SLAVE_MASK 0x2U |
| |
| /* IPI Mask for Master */ |
| #define PM_CONFIG_IPI_PSU_CORTEXA53_0_MASK 0x00000001 |
| #define PM_CONFIG_IPI_PSU_CORTEXR5_0_MASK 0x00000100 |
| #define PM_CONFIG_IPI_PSU_CORTEXR5_1_MASK 0x00000200 |
| |
| enum zynqmp_pm_request_ack { |
| ZYNQMP_PM_REQUEST_ACK_NO = 1, |
| ZYNQMP_PM_REQUEST_ACK_BLOCKING = 2, |
| ZYNQMP_PM_REQUEST_ACK_NON_BLOCKING = 3, |
| }; |
| |
| /* Node capabilities */ |
| #define ZYNQMP_PM_CAPABILITY_ACCESS 0x1U |
| #define ZYNQMP_PM_CAPABILITY_CONTEXT 0x2U |
| #define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U |
| #define ZYNQMP_PM_CAPABILITY_UNUSABLE 0x8U |
| |
| #define ZYNQMP_PM_MAX_QOS 100U |
| /* Firmware feature check version mask */ |
| #define FIRMWARE_VERSION_MASK GENMASK(15, 0) |
| /* PM API versions */ |
| #define PM_API_VERSION_2 2 |
| |
| #endif /* _ZYNQMP_FIRMWARE_H_ */ |