blob: 794ab1f4bd6674b46e44afca718e74bb96db0416 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2022 MediaTek Inc.
* Author: Sam Shih <sam.shih@mediatek.com>
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/clock/mt7986-clk.h>
#include <dt-bindings/reset/mt7629-reset.h>
#include <dt-bindings/pinctrl/mt65xx.h>
/ {
compatible = "mediatek,mt7986";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
config {
u-boot,mmc-env-partition = "u-boot-env";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
mediatek,hwver = <&hwver>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
mediatek,hwver = <&hwver>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
mediatek,hwver = <&hwver>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
mediatek,hwver = <&hwver>;
};
};
dummy_clk: dummy12m {
compatible = "fixed-clock";
clock-frequency = <12000000>;
#clock-cells = <0>;
/* must need this line, or uart uanable to get dummy_clk */
u-boot,dm-pre-reloc;
};
hwver: hwver {
compatible = "mediatek,hwver", "syscon";
reg = <0x8000000 0x1000>;
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
clock-frequency = <13000000>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
arm,cpu-registers-not-fw-configured;
};
timer0: timer@10008000 {
compatible = "mediatek,mt7986-timer";
reg = <0x10008000 0x1000>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CK_INFRA_CK_F26M>;
clock-names = "gpt-clk";
u-boot,dm-pre-reloc;
};
watchdog: watchdog@1001c000 {
compatible = "mediatek,mt7986-wdt";
reg = <0x1001c000 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
status = "disabled";
};
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
interrupt-controller;
reg = <0x0c000000 0x40000>, /* GICD */
<0x0c080000 0x200000>; /* GICR */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
fixed_plls: apmixedsys@1001E000 {
compatible = "mediatek,mt7986-fixed-plls";
reg = <0x1001E000 0x1000>;
#clock-cells = <1>;
};
topckgen: topckgen@1001B000 {
compatible = "mediatek,mt7986-topckgen";
reg = <0x1001B000 0x1000>;
clock-parent = <&fixed_plls>;
#clock-cells = <1>;
};
infracfg_ao: infracfg_ao@10001000 {
compatible = "mediatek,mt7986-infracfg_ao";
reg = <0x10001000 0x68>;
clock-parent = <&infracfg>;
#clock-cells = <1>;
};
infracfg: infracfg@10001040 {
compatible = "mediatek,mt7986-infracfg";
reg = <0x10001000 0x1000>;
clock-parent = <&topckgen>;
#clock-cells = <1>;
};
pinctrl: pinctrl@1001f000 {
compatible = "mediatek,mt7986-pinctrl";
reg = <0x1001f000 0x1000>,
<0x11c30000 0x1000>,
<0x11c40000 0x1000>,
<0x11e20000 0x1000>,
<0x11e30000 0x1000>,
<0x11f00000 0x1000>,
<0x11f10000 0x1000>,
<0x1000b000 0x1000>;
reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
"iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
"iocfg_tl_base", "eint";
gpio: gpio-controller {
gpio-controller;
#gpio-cells = <2>;
};
};
pwm: pwm@10048000 {
compatible = "mediatek,mt7986-pwm";
reg = <0x10048000 0x1000>;
#clock-cells = <1>;
#pwm-cells = <2>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CK_INFRA_PWM>,
<&infracfg_ao CK_INFRA_PWM_BSEL>,
<&infracfg_ao CK_INFRA_PWM1_CK>,
<&infracfg_ao CK_INFRA_PWM2_CK>;
assigned-clocks = <&topckgen CK_TOP_PWM_SEL>,
<&infracfg CK_INFRA_PWM_BSEL>,
<&infracfg CK_INFRA_PWM1_SEL>,
<&infracfg CK_INFRA_PWM2_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_D4>,
<&infracfg CK_INFRA_PWM>,
<&infracfg CK_INFRA_PWM>,
<&infracfg CK_INFRA_PWM>;
clock-names = "top", "main", "pwm1", "pwm2";
status = "disabled";
u-boot,dm-pre-reloc;
};
uart0: serial@11002000 {
compatible = "mediatek,hsuart";
reg = <0x11002000 0x400>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg_ao CK_INFRA_UART0_CK>;
assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
<&infracfg_ao CK_INFRA_UART0_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
<&infracfg CK_INFRA_UART>;
mediatek,force-highspeed;
status = "disabled";
u-boot,dm-pre-reloc;
};
uart1: serial@11003000 {
compatible = "mediatek,hsuart";
reg = <0x11003000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg_ao CK_INFRA_UART1_CK>;
assigned-clocks = <&infracfg CK_INFRA_UART1_SEL>;
assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
mediatek,force-highspeed;
status = "disabled";
};
uart2: serial@11004000 {
compatible = "mediatek,hsuart";
reg = <0x11004000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg_ao CK_INFRA_UART2_CK>;
assigned-clocks = <&infracfg CK_INFRA_UART2_SEL>;
assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
mediatek,force-highspeed;
status = "disabled";
};
snand: snand@11005000 {
compatible = "mediatek,mt7986-snand";
reg = <0x11005000 0x1000>,
<0x11006000 0x1000>;
reg-names = "nfi", "ecc";
clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>,
<&infracfg_ao CK_INFRA_NFI1_CK>,
<&infracfg_ao CK_INFRA_NFI_HCK_CK>;
clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>,
<&topckgen CK_TOP_NFI1X_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>,
<&topckgen CK_TOP_CB_M_D8>;
status = "disabled";
};
ethsys: syscon@15000000 {
compatible = "mediatek,mt7986-ethsys", "syscon";
reg = <0x15000000 0x1000>;
clock-parent = <&topckgen>;
#clock-cells = <1>;
#reset-cells = <1>;
};
eth: ethernet@15100000 {
compatible = "mediatek,mt7986-eth", "syscon";
reg = <0x15100000 0x20000>;
resets = <&ethsys ETHSYS_FE_RST>;
reset-names = "fe";
mediatek,ethsys = <&ethsys>;
mediatek,sgmiisys = <&sgmiisys0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys", "syscon";
reg = <0x10060000 0x1000>;
#clock-cells = <1>;
};
sgmiisys1: syscon@10070000 {
compatible = "mediatek,mt7986-sgmiisys", "syscon";
reg = <0x10070000 0x1000>;
#clock-cells = <1>;
};
spi0: spi@1100a000 {
compatible = "mediatek,ipm-spi";
reg = <0x1100a000 0x100>;
clocks = <&infracfg_ao CK_INFRA_SPI0_CK>,
<&topckgen CK_TOP_SPI_SEL>;
assigned-clocks = <&topckgen CK_TOP_SPI_SEL>,
<&infracfg CK_INFRA_SPI0_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>,
<&topckgen CK_INFRA_ISPI0>;
clock-names = "sel-clk", "spi-clk";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
spi1: spi@1100b000 {
compatible = "mediatek,ipm-spi";
reg = <0x1100b000 0x100>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mmc0: mmc@11230000 {
compatible = "mediatek,mt7986-mmc";
reg = <0x11230000 0x1000>,
<0x11C20000 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CK_TOP_EMMC_416M>,
<&topckgen CK_TOP_EMMC_250M>,
<&infracfg_ao CK_INFRA_MSDC_CK>;
assigned-clocks = <&topckgen CK_TOP_EMMC_416M_SEL>,
<&topckgen CK_TOP_EMMC_250M_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_416M>,
<&topckgen CK_TOP_NET1_D5_D2>;
clock-names = "source", "hclk", "source_cg";
status = "disabled";
};
xhci: xhci@11200000 {
compatible = "mediatek,mt7986-xhci",
"mediatek,mtk-xhci";
reg = <0x11200000 0x2e00>,
<0x11203e00 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>,
<&u2port1 PHY_TYPE_USB2>;
clocks = <&dummy_clk>,
<&dummy_clk>,
<&dummy_clk>,
<&dummy_clk>,
<&dummy_clk>;
clock-names = "sys_ck",
"xhci_ck",
"ref_ck",
"mcu_ck",
"dma_ck";
tpl-support;
status = "okay";
};
usbtphy: usb-phy@11e10000 {
compatible = "mediatek,mt7986",
"mediatek,generic-tphy-v2";
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
u2port0: usb-phy@11e10000 {
reg = <0x11e10000 0x700>;
clocks = <&dummy_clk>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy@11e10700 {
reg = <0x11e10700 0x900>;
clocks = <&dummy_clk>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u2port1: usb-phy@11e11000 {
reg = <0x11e11000 0x700>;
clocks = <&dummy_clk>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
};
};