| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd |
| */ |
| #include <common.h> |
| #include <bitfield.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <asm/io.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <div64.h> |
| #include <linux/delay.h> |
| |
| static struct rockchip_pll_rate_table rockchip_auto_table; |
| |
| #define PLL_MODE_MASK 0x3 |
| #define PLL_RK3328_MODE_MASK 0x1 |
| |
| #define RK3036_PLLCON0_FBDIV_MASK 0xfff |
| #define RK3036_PLLCON0_FBDIV_SHIFT 0 |
| #define RK3036_PLLCON0_POSTDIV1_MASK 0x7 << 12 |
| #define RK3036_PLLCON0_POSTDIV1_SHIFT 12 |
| #define RK3036_PLLCON1_REFDIV_MASK 0x3f |
| #define RK3036_PLLCON1_REFDIV_SHIFT 0 |
| #define RK3036_PLLCON1_POSTDIV2_MASK 0x7 << 6 |
| #define RK3036_PLLCON1_POSTDIV2_SHIFT 6 |
| #define RK3036_PLLCON1_DSMPD_MASK 0x1 << 12 |
| #define RK3036_PLLCON1_DSMPD_SHIFT 12 |
| #define RK3036_PLLCON2_FRAC_MASK 0xffffff |
| #define RK3036_PLLCON2_FRAC_SHIFT 0 |
| #define RK3036_PLLCON1_PWRDOWN_SHIFT 13 |
| |
| #define MHZ 1000000 |
| #define KHZ 1000 |
| enum { |
| OSC_HZ = 24 * 1000000, |
| VCO_MAX_HZ = 3200U * 1000000, |
| VCO_MIN_HZ = 800 * 1000000, |
| OUTPUT_MAX_HZ = 3200U * 1000000, |
| OUTPUT_MIN_HZ = 24 * 1000000, |
| }; |
| |
| #define MIN_FOUTVCO_FREQ (800 * MHZ) |
| #define MAX_FOUTVCO_FREQ (2000 * MHZ) |
| #define RK3588_VCO_MIN_HZ (2250UL * MHZ) |
| #define RK3588_VCO_MAX_HZ (4500UL * MHZ) |
| #define RK3588_FOUT_MIN_HZ (37UL * MHZ) |
| #define RK3588_FOUT_MAX_HZ (4500UL * MHZ) |
| |
| int gcd(int m, int n) |
| { |
| int t; |
| |
| while (m > 0) { |
| if (n > m) { |
| t = m; |
| m = n; |
| n = t; |
| } /* swap */ |
| m -= n; |
| } |
| return n; |
| } |
| |
| /* |
| * How to calculate the PLL(from TRM V0.3 Part 1 Page 63): |
| * Formulas also embedded within the Fractional PLL Verilog model: |
| * If DSMPD = 1 (DSM is disabled, "integer mode") |
| * FOUTVCO = FREF / REFDIV * FBDIV |
| * FOUTPOSTDIV = FOUTVCO / POSTDIV1 / POSTDIV2 |
| * Where: |
| * FOUTVCO = Fractional PLL non-divided output frequency |
| * FOUTPOSTDIV = Fractional PLL divided output frequency |
| * (output of second post divider) |
| * FREF = Fractional PLL input reference frequency, (the OSC_HZ 24MHz input) |
| * REFDIV = Fractional PLL input reference clock divider |
| * FBDIV = Integer value programmed into feedback divide |
| * |
| */ |
| |
| static int rockchip_pll_clk_set_postdiv(ulong fout_hz, |
| u32 *postdiv1, |
| u32 *postdiv2, |
| u32 *foutvco) |
| { |
| ulong freq; |
| |
| if (fout_hz < MIN_FOUTVCO_FREQ) { |
| for (*postdiv1 = 1; *postdiv1 <= 7; (*postdiv1)++) { |
| for (*postdiv2 = 1; *postdiv2 <= 7; (*postdiv2)++) { |
| freq = fout_hz * (*postdiv1) * (*postdiv2); |
| if (freq >= MIN_FOUTVCO_FREQ && |
| freq <= MAX_FOUTVCO_FREQ) { |
| *foutvco = freq; |
| return 0; |
| } |
| } |
| } |
| printf("Can't FIND postdiv1/2 to make fout=%lu in 800~2000M.\n", |
| fout_hz); |
| } else { |
| *postdiv1 = 1; |
| *postdiv2 = 1; |
| } |
| return 0; |
| } |
| |
| static struct rockchip_pll_rate_table * |
| rockchip_pll_clk_set_by_auto(ulong fin_hz, |
| ulong fout_hz) |
| { |
| struct rockchip_pll_rate_table *rate_table = &rockchip_auto_table; |
| /* FIXME set postdiv1/2 always 1*/ |
| u32 foutvco = fout_hz; |
| ulong fin_64, frac_64; |
| u32 f_frac, postdiv1, postdiv2; |
| ulong clk_gcd = 0; |
| |
| if (fin_hz == 0 || fout_hz == 0 || fout_hz == fin_hz) |
| return NULL; |
| |
| rockchip_pll_clk_set_postdiv(fout_hz, &postdiv1, &postdiv2, &foutvco); |
| rate_table->postdiv1 = postdiv1; |
| rate_table->postdiv2 = postdiv2; |
| rate_table->dsmpd = 1; |
| |
| if (fin_hz / MHZ * MHZ == fin_hz && fout_hz / MHZ * MHZ == fout_hz) { |
| fin_hz /= MHZ; |
| foutvco /= MHZ; |
| clk_gcd = gcd(fin_hz, foutvco); |
| rate_table->refdiv = fin_hz / clk_gcd; |
| rate_table->fbdiv = foutvco / clk_gcd; |
| |
| rate_table->frac = 0; |
| |
| debug("fin = %ld, fout = %ld, clk_gcd = %ld,\n", |
| fin_hz, fout_hz, clk_gcd); |
| debug("refdiv= %d,fbdiv= %d,postdiv1= %d,postdiv2= %d\n", |
| rate_table->refdiv, |
| rate_table->fbdiv, rate_table->postdiv1, |
| rate_table->postdiv2); |
| } else { |
| debug("frac div,fin_hz = %ld,fout_hz = %ld\n", |
| fin_hz, fout_hz); |
| debug("frac get postdiv1 = %d, postdiv2 = %d, foutvco = %d\n", |
| rate_table->postdiv1, rate_table->postdiv2, foutvco); |
| clk_gcd = gcd(fin_hz / MHZ, foutvco / MHZ); |
| rate_table->refdiv = fin_hz / MHZ / clk_gcd; |
| rate_table->fbdiv = foutvco / MHZ / clk_gcd; |
| debug("frac get refdiv = %d, fbdiv = %d\n", |
| rate_table->refdiv, rate_table->fbdiv); |
| |
| rate_table->frac = 0; |
| |
| f_frac = (foutvco % MHZ); |
| fin_64 = fin_hz; |
| fin_64 = fin_64 / rate_table->refdiv; |
| frac_64 = f_frac << 24; |
| frac_64 = frac_64 / fin_64; |
| rate_table->frac = frac_64; |
| if (rate_table->frac > 0) |
| rate_table->dsmpd = 0; |
| debug("frac = %x\n", rate_table->frac); |
| } |
| return rate_table; |
| } |
| |
| static u32 |
| rockchip_rk3588_pll_k_get(u32 m, u32 p, u32 s, u64 fin_hz, u64 fvco) |
| { |
| u64 fref, fout, ffrac; |
| u32 k = 0; |
| |
| fref = fin_hz / p; |
| ffrac = fvco - (m * fref); |
| fout = ffrac * 65536; |
| k = fout / fref; |
| if (k > 32767) { |
| fref = fin_hz / p; |
| ffrac = ((m + 1) * fref) - fvco; |
| fout = ffrac * 65536; |
| k = ((fout * 10 / fref) + 7) / 10; |
| if (k > 32767) |
| k = 0; |
| else |
| k = ~k + 1; |
| } |
| return k; |
| } |
| |
| static struct rockchip_pll_rate_table * |
| rockchip_rk3588_pll_frac_by_auto(unsigned long fin_hz, unsigned long fout_hz) |
| { |
| struct rockchip_pll_rate_table *rate_table = &rockchip_auto_table; |
| u32 p, m, s, k; |
| u64 fvco; |
| |
| for (s = 0; s <= 6; s++) { |
| fvco = (u64)fout_hz << s; |
| if (fvco < RK3588_VCO_MIN_HZ || fvco > RK3588_VCO_MAX_HZ) |
| continue; |
| for (p = 1; p <= 4; p++) { |
| for (m = 64; m <= 1023; m++) { |
| if ((fvco >= m * fin_hz / p) && |
| (fvco < (m + 1) * fin_hz / p)) { |
| k = rockchip_rk3588_pll_k_get(m, p, s, |
| fin_hz, |
| fvco); |
| if (!k) |
| continue; |
| rate_table->p = p; |
| rate_table->s = s; |
| rate_table->k = k; |
| if (k > 32767) |
| rate_table->m = m + 1; |
| else |
| rate_table->m = m; |
| return rate_table; |
| } |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| static struct rockchip_pll_rate_table * |
| rk3588_pll_clk_set_by_auto(unsigned long fin_hz, |
| unsigned long fout_hz) |
| { |
| struct rockchip_pll_rate_table *rate_table = &rockchip_auto_table; |
| u32 p, m, s; |
| ulong fvco; |
| |
| if (fin_hz == 0 || fout_hz == 0 || fout_hz == fin_hz) |
| return NULL; |
| |
| if (fout_hz > RK3588_FOUT_MAX_HZ || fout_hz < RK3588_FOUT_MIN_HZ) |
| return NULL; |
| |
| if (fin_hz / MHZ * MHZ == fin_hz && fout_hz / MHZ * MHZ == fout_hz) { |
| for (s = 0; s <= 6; s++) { |
| fvco = fout_hz << s; |
| if (fvco < RK3588_VCO_MIN_HZ || |
| fvco > RK3588_VCO_MAX_HZ) |
| continue; |
| for (p = 2; p <= 4; p++) { |
| for (m = 64; m <= 1023; m++) { |
| if (fvco == m * fin_hz / p) { |
| rate_table->p = p; |
| rate_table->m = m; |
| rate_table->s = s; |
| rate_table->k = 0; |
| return rate_table; |
| } |
| } |
| } |
| } |
| pr_err("CANNOT FIND Fout by auto,fout = %lu\n", fout_hz); |
| } else { |
| rate_table = rockchip_rk3588_pll_frac_by_auto(fin_hz, fout_hz); |
| if (!rate_table) |
| pr_err("CANNOT FIND Fout by auto,fout = %lu\n", |
| fout_hz); |
| else |
| return rate_table; |
| } |
| return NULL; |
| } |
| |
| static const struct rockchip_pll_rate_table * |
| rockchip_get_pll_settings(struct rockchip_pll_clock *pll, ulong rate) |
| { |
| struct rockchip_pll_rate_table *rate_table = pll->rate_table; |
| |
| while (rate_table->rate) { |
| if (rate_table->rate == rate) |
| break; |
| rate_table++; |
| } |
| if (rate_table->rate != rate) { |
| if (pll->type == pll_rk3588) |
| return rk3588_pll_clk_set_by_auto(24 * MHZ, rate); |
| else |
| return rockchip_pll_clk_set_by_auto(24 * MHZ, rate); |
| } else { |
| return rate_table; |
| } |
| } |
| |
| static int rk3036_pll_set_rate(struct rockchip_pll_clock *pll, |
| void __iomem *base, ulong pll_id, |
| ulong drate) |
| { |
| const struct rockchip_pll_rate_table *rate; |
| |
| rate = rockchip_get_pll_settings(pll, drate); |
| if (!rate) { |
| printf("%s unsupport rate\n", __func__); |
| return -EINVAL; |
| } |
| |
| debug("%s: rate settings for %lu fbdiv: %d, postdiv1: %d, refdiv: %d\n", |
| __func__, rate->rate, rate->fbdiv, rate->postdiv1, rate->refdiv); |
| debug("%s: rate settings for %lu postdiv2: %d, dsmpd: %d, frac: %d\n", |
| __func__, rate->rate, rate->postdiv2, rate->dsmpd, rate->frac); |
| |
| /* |
| * When power on or changing PLL setting, |
| * we must force PLL into slow mode to ensure output stable clock. |
| */ |
| rk_clrsetreg(base + pll->mode_offset, |
| pll->mode_mask << pll->mode_shift, |
| RKCLK_PLL_MODE_SLOW << pll->mode_shift); |
| |
| /* Power down */ |
| rk_setreg(base + pll->con_offset + 0x4, |
| 1 << RK3036_PLLCON1_PWRDOWN_SHIFT); |
| |
| rk_clrsetreg(base + pll->con_offset, |
| (RK3036_PLLCON0_POSTDIV1_MASK | |
| RK3036_PLLCON0_FBDIV_MASK), |
| (rate->postdiv1 << RK3036_PLLCON0_POSTDIV1_SHIFT) | |
| rate->fbdiv); |
| rk_clrsetreg(base + pll->con_offset + 0x4, |
| (RK3036_PLLCON1_POSTDIV2_MASK | |
| RK3036_PLLCON1_REFDIV_MASK), |
| (rate->postdiv2 << RK3036_PLLCON1_POSTDIV2_SHIFT | |
| rate->refdiv << RK3036_PLLCON1_REFDIV_SHIFT)); |
| if (!rate->dsmpd) { |
| rk_clrsetreg(base + pll->con_offset + 0x4, |
| RK3036_PLLCON1_DSMPD_MASK, |
| rate->dsmpd << RK3036_PLLCON1_DSMPD_SHIFT); |
| writel((readl(base + pll->con_offset + 0x8) & |
| (~RK3036_PLLCON2_FRAC_MASK)) | |
| (rate->frac << RK3036_PLLCON2_FRAC_SHIFT), |
| base + pll->con_offset + 0x8); |
| } |
| |
| /* Power Up */ |
| rk_clrreg(base + pll->con_offset + 0x4, |
| 1 << RK3036_PLLCON1_PWRDOWN_SHIFT); |
| |
| /* waiting for pll lock */ |
| while (!(readl(base + pll->con_offset + 0x4) & (1 << pll->lock_shift))) |
| udelay(1); |
| |
| rk_clrsetreg(base + pll->mode_offset, pll->mode_mask << pll->mode_shift, |
| RKCLK_PLL_MODE_NORMAL << pll->mode_shift); |
| debug("PLL at %p: con0=%x con1= %x con2= %x mode= %x\n", |
| pll, readl(base + pll->con_offset), |
| readl(base + pll->con_offset + 0x4), |
| readl(base + pll->con_offset + 0x8), |
| readl(base + pll->mode_offset)); |
| |
| return 0; |
| } |
| |
| static ulong rk3036_pll_get_rate(struct rockchip_pll_clock *pll, |
| void __iomem *base, ulong pll_id) |
| { |
| u32 refdiv, fbdiv, postdiv1, postdiv2, dsmpd, frac; |
| u32 con = 0, shift, mask; |
| ulong rate; |
| |
| con = readl(base + pll->mode_offset); |
| shift = pll->mode_shift; |
| mask = pll->mode_mask << shift; |
| |
| switch ((con & mask) >> shift) { |
| case RKCLK_PLL_MODE_SLOW: |
| return OSC_HZ; |
| case RKCLK_PLL_MODE_NORMAL: |
| /* normal mode */ |
| con = readl(base + pll->con_offset); |
| postdiv1 = (con & RK3036_PLLCON0_POSTDIV1_MASK) >> |
| RK3036_PLLCON0_POSTDIV1_SHIFT; |
| fbdiv = (con & RK3036_PLLCON0_FBDIV_MASK) >> |
| RK3036_PLLCON0_FBDIV_SHIFT; |
| con = readl(base + pll->con_offset + 0x4); |
| postdiv2 = (con & RK3036_PLLCON1_POSTDIV2_MASK) >> |
| RK3036_PLLCON1_POSTDIV2_SHIFT; |
| refdiv = (con & RK3036_PLLCON1_REFDIV_MASK) >> |
| RK3036_PLLCON1_REFDIV_SHIFT; |
| dsmpd = (con & RK3036_PLLCON1_DSMPD_MASK) >> |
| RK3036_PLLCON1_DSMPD_SHIFT; |
| con = readl(base + pll->con_offset + 0x8); |
| frac = (con & RK3036_PLLCON2_FRAC_MASK) >> |
| RK3036_PLLCON2_FRAC_SHIFT; |
| rate = (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000; |
| if (dsmpd == 0) { |
| u64 frac_rate = OSC_HZ * (u64)frac; |
| |
| do_div(frac_rate, refdiv); |
| frac_rate >>= 24; |
| do_div(frac_rate, postdiv1); |
| do_div(frac_rate, postdiv1); |
| rate += frac_rate; |
| } |
| return rate; |
| case RKCLK_PLL_MODE_DEEP: |
| default: |
| return 32768; |
| } |
| } |
| |
| #define RK3588_PLLCON(i) ((i) * 0x4) |
| #define RK3588_PLLCON0_M_MASK 0x3ff << 0 |
| #define RK3588_PLLCON0_M_SHIFT 0 |
| #define RK3588_PLLCON1_P_MASK 0x3f << 0 |
| #define RK3588_PLLCON1_P_SHIFT 0 |
| #define RK3588_PLLCON1_S_MASK 0x7 << 6 |
| #define RK3588_PLLCON1_S_SHIFT 6 |
| #define RK3588_PLLCON2_K_MASK 0xffff |
| #define RK3588_PLLCON2_K_SHIFT 0 |
| #define RK3588_PLLCON1_PWRDOWN BIT(13) |
| #define RK3588_PLLCON6_LOCK_STATUS BIT(15) |
| #define RK3588_B0PLL_CLKSEL_CON(i) ((i) * 0x4 + 0x50000 + 0x300) |
| #define RK3588_B1PLL_CLKSEL_CON(i) ((i) * 0x4 + 0x52000 + 0x300) |
| #define RK3588_LPLL_CLKSEL_CON(i) ((i) * 0x4 + 0x58000 + 0x300) |
| #define RK3588_CORE_DIV_MASK 0x1f |
| #define RK3588_CORE_L02_DIV_SHIFT 0 |
| #define RK3588_CORE_L13_DIV_SHIFT 7 |
| #define RK3588_CORE_B02_DIV_SHIFT 8 |
| #define RK3588_CORE_B13_DIV_SHIFT 0 |
| |
| static int rk3588_pll_set_rate(struct rockchip_pll_clock *pll, |
| void __iomem *base, ulong pll_id, |
| ulong drate) |
| { |
| const struct rockchip_pll_rate_table *rate; |
| |
| rate = rockchip_get_pll_settings(pll, drate); |
| if (!rate) { |
| printf("%s unsupported rate\n", __func__); |
| return -EINVAL; |
| } |
| |
| debug("%s: rate settings for %lu p: %d, m: %d, s: %d, k: %d\n", |
| __func__, rate->rate, rate->p, rate->m, rate->s, rate->k); |
| |
| /* |
| * When power on or changing PLL setting, |
| * we must force PLL into slow mode to ensure output stable clock. |
| */ |
| if (pll_id == 3) |
| rk_clrsetreg(base + 0x84c, 0x1 << 1, 0x1 << 1); |
| |
| rk_clrsetreg(base + pll->mode_offset, |
| pll->mode_mask << pll->mode_shift, |
| RKCLK_PLL_MODE_SLOW << pll->mode_shift); |
| if (pll_id == 0) |
| rk_clrsetreg(base + RK3588_B0PLL_CLKSEL_CON(0), |
| pll->mode_mask << 6, |
| RKCLK_PLL_MODE_SLOW << 6); |
| else if (pll_id == 1) |
| rk_clrsetreg(base + RK3588_B1PLL_CLKSEL_CON(0), |
| pll->mode_mask << 6, |
| RKCLK_PLL_MODE_SLOW << 6); |
| else if (pll_id == 2) |
| rk_clrsetreg(base + RK3588_LPLL_CLKSEL_CON(5), |
| pll->mode_mask << 14, |
| RKCLK_PLL_MODE_SLOW << 14); |
| |
| /* Power down */ |
| rk_setreg(base + pll->con_offset + RK3588_PLLCON(1), |
| RK3588_PLLCON1_PWRDOWN); |
| |
| rk_clrsetreg(base + pll->con_offset, |
| RK3588_PLLCON0_M_MASK, |
| (rate->m << RK3588_PLLCON0_M_SHIFT)); |
| rk_clrsetreg(base + pll->con_offset + RK3588_PLLCON(1), |
| (RK3588_PLLCON1_P_MASK | |
| RK3588_PLLCON1_S_MASK), |
| (rate->p << RK3588_PLLCON1_P_SHIFT | |
| rate->s << RK3588_PLLCON1_S_SHIFT)); |
| if (rate->k) { |
| rk_clrsetreg(base + pll->con_offset + RK3588_PLLCON(2), |
| RK3588_PLLCON2_K_MASK, |
| rate->k << RK3588_PLLCON2_K_SHIFT); |
| } |
| /* Power up */ |
| rk_clrreg(base + pll->con_offset + RK3588_PLLCON(1), |
| RK3588_PLLCON1_PWRDOWN); |
| |
| /* waiting for pll lock */ |
| while (!(readl(base + pll->con_offset + RK3588_PLLCON(6)) & |
| RK3588_PLLCON6_LOCK_STATUS)) { |
| udelay(1); |
| debug("%s: wait pll lock, pll_id=%ld\n", __func__, pll_id); |
| } |
| |
| rk_clrsetreg(base + pll->mode_offset, pll->mode_mask << pll->mode_shift, |
| RKCLK_PLL_MODE_NORMAL << pll->mode_shift); |
| if (pll_id == 0) { |
| rk_clrsetreg(base + RK3588_B0PLL_CLKSEL_CON(0), |
| pll->mode_mask << 6, |
| 2 << 6); |
| rk_clrsetreg(base + RK3588_B0PLL_CLKSEL_CON(0), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_B02_DIV_SHIFT, |
| 0 << RK3588_CORE_B02_DIV_SHIFT); |
| rk_clrsetreg(base + RK3588_B0PLL_CLKSEL_CON(1), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_B13_DIV_SHIFT, |
| 0 << RK3588_CORE_B13_DIV_SHIFT); |
| } else if (pll_id == 1) { |
| rk_clrsetreg(base + RK3588_B1PLL_CLKSEL_CON(0), |
| pll->mode_mask << 6, |
| 2 << 6); |
| rk_clrsetreg(base + RK3588_B1PLL_CLKSEL_CON(0), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_B02_DIV_SHIFT, |
| 0 << RK3588_CORE_B02_DIV_SHIFT); |
| rk_clrsetreg(base + RK3588_B1PLL_CLKSEL_CON(1), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_B13_DIV_SHIFT, |
| 0 << RK3588_CORE_B13_DIV_SHIFT); |
| } else if (pll_id == 2) { |
| rk_clrsetreg(base + RK3588_LPLL_CLKSEL_CON(5), |
| pll->mode_mask << 14, |
| 2 << 14); |
| rk_clrsetreg(base + RK3588_LPLL_CLKSEL_CON(6), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_L13_DIV_SHIFT, |
| 0 << RK3588_CORE_L13_DIV_SHIFT); |
| rk_clrsetreg(base + RK3588_LPLL_CLKSEL_CON(6), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_L02_DIV_SHIFT, |
| 0 << RK3588_CORE_L02_DIV_SHIFT); |
| rk_clrsetreg(base + RK3588_LPLL_CLKSEL_CON(7), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_L13_DIV_SHIFT, |
| 0 << RK3588_CORE_L13_DIV_SHIFT); |
| rk_clrsetreg(base + RK3588_LPLL_CLKSEL_CON(7), |
| RK3588_CORE_DIV_MASK << RK3588_CORE_L02_DIV_SHIFT, |
| 0 << RK3588_CORE_L02_DIV_SHIFT); |
| } |
| |
| if (pll_id == 3) |
| rk_clrsetreg(base + 0x84c, 0x1 << 1, 0); |
| |
| debug("PLL at %p: con0=%x con1= %x con2= %x mode= %x\n", |
| pll, readl(base + pll->con_offset), |
| readl(base + pll->con_offset + 0x4), |
| readl(base + pll->con_offset + 0x8), |
| readl(base + pll->mode_offset)); |
| |
| return 0; |
| } |
| |
| static ulong rk3588_pll_get_rate(struct rockchip_pll_clock *pll, |
| void __iomem *base, ulong pll_id) |
| { |
| u32 m, p, s, k; |
| u32 con = 0, shift, mode; |
| u64 rate, postdiv; |
| |
| con = readl(base + pll->mode_offset); |
| shift = pll->mode_shift; |
| if (pll_id == 8) |
| mode = RKCLK_PLL_MODE_NORMAL; |
| else |
| mode = (con & (pll->mode_mask << shift)) >> shift; |
| switch (mode) { |
| case RKCLK_PLL_MODE_SLOW: |
| return OSC_HZ; |
| case RKCLK_PLL_MODE_NORMAL: |
| /* normal mode */ |
| con = readl(base + pll->con_offset); |
| m = (con & RK3588_PLLCON0_M_MASK) >> |
| RK3588_PLLCON0_M_SHIFT; |
| con = readl(base + pll->con_offset + RK3588_PLLCON(1)); |
| p = (con & RK3588_PLLCON1_P_MASK) >> |
| RK3036_PLLCON0_FBDIV_SHIFT; |
| s = (con & RK3588_PLLCON1_S_MASK) >> |
| RK3588_PLLCON1_S_SHIFT; |
| con = readl(base + pll->con_offset + RK3588_PLLCON(2)); |
| k = (con & RK3588_PLLCON2_K_MASK) >> |
| RK3588_PLLCON2_K_SHIFT; |
| |
| rate = OSC_HZ / p; |
| rate *= m; |
| if (k & BIT(15)) { |
| /* fractional mode */ |
| u64 frac_rate64; |
| |
| k = (~(k - 1)) & RK3588_PLLCON2_K_MASK; |
| frac_rate64 = OSC_HZ * k; |
| postdiv = p; |
| postdiv *= 65536; |
| do_div(frac_rate64, postdiv); |
| rate -= frac_rate64; |
| } else { |
| /* fractional mode */ |
| u64 frac_rate64 = OSC_HZ * k; |
| |
| postdiv = p; |
| postdiv *= 65536; |
| do_div(frac_rate64, postdiv); |
| rate += frac_rate64; |
| } |
| rate = rate >> s; |
| return rate; |
| case RKCLK_PLL_MODE_DEEP: |
| default: |
| return 32768; |
| } |
| } |
| |
| ulong rockchip_pll_get_rate(struct rockchip_pll_clock *pll, |
| void __iomem *base, |
| ulong pll_id) |
| { |
| ulong rate = 0; |
| |
| switch (pll->type) { |
| case pll_rk3036: |
| pll->mode_mask = PLL_MODE_MASK; |
| rate = rk3036_pll_get_rate(pll, base, pll_id); |
| break; |
| case pll_rk3328: |
| pll->mode_mask = PLL_RK3328_MODE_MASK; |
| rate = rk3036_pll_get_rate(pll, base, pll_id); |
| break; |
| case pll_rk3588: |
| pll->mode_mask = PLL_MODE_MASK; |
| rate = rk3588_pll_get_rate(pll, base, pll_id); |
| break; |
| default: |
| printf("%s: Unknown pll type for pll clk %ld\n", |
| __func__, pll_id); |
| } |
| return rate; |
| } |
| |
| int rockchip_pll_set_rate(struct rockchip_pll_clock *pll, |
| void __iomem *base, ulong pll_id, |
| ulong drate) |
| { |
| int ret = 0; |
| |
| if (rockchip_pll_get_rate(pll, base, pll_id) == drate) |
| return 0; |
| |
| switch (pll->type) { |
| case pll_rk3036: |
| pll->mode_mask = PLL_MODE_MASK; |
| ret = rk3036_pll_set_rate(pll, base, pll_id, drate); |
| break; |
| case pll_rk3328: |
| pll->mode_mask = PLL_RK3328_MODE_MASK; |
| ret = rk3036_pll_set_rate(pll, base, pll_id, drate); |
| break; |
| case pll_rk3588: |
| pll->mode_mask = PLL_MODE_MASK; |
| ret = rk3588_pll_set_rate(pll, base, pll_id, drate); |
| break; |
| default: |
| printf("%s: Unknown pll type for pll clk %ld\n", |
| __func__, pll_id); |
| } |
| return ret; |
| } |
| |
| const struct rockchip_cpu_rate_table * |
| rockchip_get_cpu_settings(struct rockchip_cpu_rate_table *cpu_table, |
| ulong rate) |
| { |
| struct rockchip_cpu_rate_table *ps = cpu_table; |
| |
| while (ps->rate) { |
| if (ps->rate == rate) |
| break; |
| ps++; |
| } |
| if (ps->rate != rate) |
| return NULL; |
| else |
| return ps; |
| } |