blob: 5638c10128e9c3cfda63539d131d7375966dfed0 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* IRQ is a type of interrupt controller used on recent Intel SoC.
*
* Copyright 2019 Google LLC
*/
#ifndef __irq_H
#define __irq_H
struct acpi_irq;
struct ofnode_phandle_args;
/*
* Interrupt controller types available. You can find a particular one with
* irq_first_device_type()
*/
enum irq_dev_t {
X86_IRQT_BASE, /* Base controller */
X86_IRQT_ITSS, /* ITSS controller, e.g. on APL */
X86_IRQT_ACPI_GPE, /* ACPI General-Purpose Events controller */
SANDBOX_IRQT_BASE, /* Sandbox testing */
};
/**
* struct irq - A single irq line handled by an interrupt controller
*
* @dev: IRQ device that handles this irq
* @id: ID to identify this irq with the device
* @flags: Flags associated with this interrupt (IRQ_TYPE_...)
*/
struct irq {
struct udevice *dev;
ulong id;
ulong flags;
};
/**
* struct irq_ops - Operations for the IRQ
*
* Each IRQ device can handle mulitple IRQ lines
*/
struct irq_ops {
/**
* route_pmc_gpio_gpe() - Get the GPIO for an event
*
* @dev: IRQ device
* @pmc_gpe_num: Event number to check
* @returns GPIO for the event, or -ENOENT if none
*/
int (*route_pmc_gpio_gpe)(struct udevice *dev, uint pmc_gpe_num);
/**
* set_polarity() - Set the IRQ polarity
*
* @dev: IRQ device
* @irq: Interrupt number to set
* @active_low: true if active low, false for active high
* @return 0 if OK, -EINVAL if @irq is invalid
*/
int (*set_polarity)(struct udevice *dev, uint irq, bool active_low);
/**
* snapshot_polarities() - record IRQ polarities for later restore
*
* @dev: IRQ device
* @return 0
*/
int (*snapshot_polarities)(struct udevice *dev);
/**
* restore_polarities() - restore IRQ polarities
*
* @dev: IRQ device
* @return 0
*/
int (*restore_polarities)(struct udevice *dev);
/**
* read_and_clear() - get the value of an interrupt and clear it
*
* Clears the interrupt if pending
*
* @irq: IRQ line
* @return 0 if interrupt is not pending, 1 if it was (and so has been
* cleared), -ve on error
*/
int (*read_and_clear)(struct irq *irq);
/**
* of_xlate - Translate a client's device-tree (OF) irq specifier.
*
* The irq core calls this function as the first step in implementing
* a client's irq_get_by_*() call.
*
* If this function pointer is set to NULL, the irq core will use a
* default implementation, which assumes #interrupt-cells = <1>, and
* that the DT cell contains a simple integer irq ID.
*
* @irq: The irq struct to hold the translation result.
* @args: The irq specifier values from device tree.
* @return 0 if OK, or a negative error code.
*/
int (*of_xlate)(struct irq *irq, struct ofnode_phandle_args *args);
/**
* request - Request a translated irq.
*
* The irq core calls this function as the second step in
* implementing a client's irq_get_by_*() call, following a successful
* xxx_xlate() call, or as the only step in implementing a client's
* irq_request() call.
*
* @irq: The irq struct to request; this has been filled in by
* a previoux xxx_xlate() function call, or by the caller
* of irq_request().
* @return 0 if OK, or a negative error code.
*/
int (*request)(struct irq *irq);
/**
* free - Free a previously requested irq.
*
* This is the implementation of the client irq_free() API.
*
* @irq: The irq to free.
* @return 0 if OK, or a negative error code.
*/
int (*free)(struct irq *irq);
#if CONFIG_IS_ENABLED(ACPIGEN)
/**
* get_acpi() - Get the ACPI info for an irq
*
* This converts a irq to an ACPI structure for adding to the ACPI
* tables.
*
* @irq: irq to convert
* @acpi_irq: Output ACPI interrupt information
* @return ACPI pin number or -ve on error
*/
int (*get_acpi)(const struct irq *irq, struct acpi_irq *acpi_irq);
#endif
};
#define irq_get_ops(dev) ((struct irq_ops *)(dev)->driver->ops)
/**
* irq_is_valid() - Check if an IRQ is valid
*
* @irq: IRQ description containing device and ID, e.g. previously
* returned by irq_get_by_index()
* Return: true if valid, false if not
*/
static inline bool irq_is_valid(const struct irq *irq)
{
return irq->dev != NULL;
}
/**
* irq_route_pmc_gpio_gpe() - Get the GPIO for an event
*
* @dev: IRQ device
* @pmc_gpe_num: Event number to check
* @returns GPIO for the event, or -ENOENT if none
*/
int irq_route_pmc_gpio_gpe(struct udevice *dev, uint pmc_gpe_num);
/**
* irq_set_polarity() - Set the IRQ polarity
*
* @dev: IRQ device
* @irq: Interrupt number to set
* @active_low: true if active low, false for active high
* Return: 0 if OK, -EINVAL if @irq is invalid
*/
int irq_set_polarity(struct udevice *dev, uint irq, bool active_low);
/**
* irq_snapshot_polarities() - record IRQ polarities for later restore
*
* @dev: IRQ device
* Return: 0
*/
int irq_snapshot_polarities(struct udevice *dev);
/**
* irq_restore_polarities() - restore IRQ polarities
*
* @dev: IRQ device
* Return: 0
*/
int irq_restore_polarities(struct udevice *dev);
/**
* read_and_clear() - get the value of an interrupt and clear it
*
* Clears the interrupt if pending
*
* @dev: IRQ device
* Return: 0 if interrupt is not pending, 1 if it was (and so has been
* cleared), -ve on error
*/
int irq_read_and_clear(struct irq *irq);
struct phandle_2_arg;
/**
* irq_get_by_phandle() - Get an irq by its phandle information (of-platadata)
*
* This function is used when of-platdata is enabled.
*
* This looks up an irq using the phandle info. With dtoc, each phandle in the
* 'interrupts-extended ' property is transformed into an idx representing the
* device. For example:
*
* interrupts-extended = <&acpi_gpe 0x3c 0>;
*
* might result in:
*
* .interrupts_extended = {6, {0x3c, 0}},},
*
* indicating that the irq is udevice idx 6 in dt-plat.c with a arguments of
* 0x3c and 0.This function can return a valid irq given the above
* information. In this example it would return an irq containing the
* 'acpi_gpe' device and the irq ID 0x3c.
*
* @dev: Device containing the phandle
* @cells: Phandle info
* @irq: A pointer to a irq struct to initialise
* Return: 0 if OK, or a negative error code
*/
int irq_get_by_phandle(struct udevice *dev, const struct phandle_2_arg *cells,
struct irq *irq);
/**
* irq_get_by_index - Get/request an irq by integer index.
*
* This looks up and requests an irq. The index is relative to the client
* device; each device is assumed to have n irqs associated with it somehow,
* and this function finds and requests one of them. The mapping of client
* device irq indices to provider irqs may be via device-tree
* properties, board-provided mapping tables, or some other mechanism.
*
* @dev: The client device.
* @index: The index of the irq to request, within the client's list of
* irqs.
* @irq: A pointer to a irq struct to initialise.
* Return: 0 if OK, or a negative error code.
*/
int irq_get_by_index(struct udevice *dev, int index, struct irq *irq);
/**
* irq_request - Request a irq by provider-specific ID.
*
* This requests a irq using a provider-specific ID. Generally, this function
* should not be used, since irq_get_by_index/name() provide an interface that
* better separates clients from intimate knowledge of irq providers.
* However, this function may be useful in core SoC-specific code.
*
* @dev: The irq provider device.
* @irq: A pointer to a irq struct to initialise. The caller must
* have already initialised any field in this struct which the
* irq provider uses to identify the irq.
* Return: 0 if OK, or a negative error code.
*/
int irq_request(struct udevice *dev, struct irq *irq);
/**
* irq_free - Free a previously requested irq.
*
* @irq: A irq struct that was previously successfully requested by
* irq_request/get_by_*().
* Return: 0 if OK, or a negative error code.
*/
int irq_free(struct irq *irq);
/**
* irq_first_device_type() - Get a particular interrupt controller
*
* On success this returns an activated interrupt device.
*
* @type: Type to find
* @devp: Returns the device, if found
* Return: 0 if OK, -ENODEV if not found, other -ve error if uclass failed to
* probe
*/
int irq_first_device_type(enum irq_dev_t type, struct udevice **devp);
/**
* irq_get_acpi() - Get the ACPI info for an irq
*
* This converts a irq to an ACPI structure for adding to the ACPI
* tables.
*
* @irq: irq to convert
* @acpi_irq: Output ACPI interrupt information
* Return: ACPI pin number or -ve on error
*/
int irq_get_acpi(const struct irq *irq, struct acpi_irq *acpi_irq);
#endif