| /* |
| * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. All rights reserved. |
| * Copyright (C) 2009 DENX Software Engineering <wd@denx.de> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #include <asm/io.h> |
| #include <asm/mmu.h> |
| #include <asm/global_data.h> |
| #include <pci.h> |
| #if defined(CONFIG_OF_LIBFDT) |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* System RAM mapped to PCI space */ |
| #define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE |
| |
| static struct pci_controller pci_hose; |
| |
| |
| /************************************************************************** |
| * pci_init_board() |
| * |
| */ |
| void |
| pci_init_board(void) |
| { |
| volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; |
| volatile law512x_t *pci_law; |
| volatile pot512x_t *pci_pot; |
| volatile pcictrl512x_t *pci_ctrl; |
| volatile pciconf512x_t *pci_conf; |
| u16 reg16; |
| u32 reg32; |
| u32 dev; |
| int i; |
| struct pci_controller *hose; |
| |
| /* Set PCI divider for 33MHz */ |
| reg32 = im->clk.scfr[0]; |
| reg32 &= ~(SCFR1_PCI_DIV_MASK); |
| reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT; |
| im->clk.scfr[0] = reg32; |
| |
| clrsetbits_be32(&im->clk.scfr[0], |
| SCFR1_PCI_DIV_MASK, |
| SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT |
| ); |
| |
| pci_law = im->sysconf.pcilaw; |
| pci_pot = im->ios.pot; |
| pci_ctrl = &im->pci_ctrl; |
| pci_conf = &im->pci_conf; |
| |
| hose = &pci_hose; |
| |
| /* |
| * Release PCI RST Output signal |
| */ |
| out_be32(&pci_ctrl->gcr, 0); |
| udelay(2000); |
| out_be32(&pci_ctrl->gcr, 1); |
| |
| /* We need to wait at least a 1sec based on PCI specs */ |
| for (i = 0; i < 1000; i++) |
| udelay(1000); |
| |
| /* |
| * Configure PCI Local Access Windows |
| */ |
| out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR); |
| out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M); |
| |
| out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR); |
| out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M); |
| |
| /* |
| * Configure PCI Outbound Translation Windows |
| */ |
| |
| /* PCI mem space - prefetch */ |
| out_be32(&pci_pot[0].potar, |
| (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK); |
| out_be32(&pci_pot[0].pobar, |
| (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK); |
| out_be32(&pci_pot[0].pocmr, |
| POCMR_EN | POCMR_PRE | POCMR_CM_256M); |
| |
| /* PCI IO space */ |
| out_be32(&pci_pot[1].potar, |
| (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK); |
| out_be32(&pci_pot[1].pobar, |
| (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK); |
| out_be32(&pci_pot[1].pocmr, |
| POCMR_EN | POCMR_IO | POCMR_CM_16M); |
| |
| /* PCI mmio - non-prefetch mem space */ |
| out_be32(&pci_pot[2].potar, |
| (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK); |
| out_be32(&pci_pot[2].pobar, |
| (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK); |
| out_be32(&pci_pot[2].pocmr, |
| POCMR_EN | POCMR_CM_256M); |
| |
| /* |
| * Configure PCI Inbound Translation Windows |
| */ |
| |
| /* we need RAM mapped to PCI space for the devices to |
| * access main memory */ |
| out_be32(&pci_ctrl[0].pitar1, 0x0); |
| out_be32(&pci_ctrl[0].pibar1, 0x0); |
| out_be32(&pci_ctrl[0].piebar1, 0x0); |
| out_be32(&pci_ctrl[0].piwar1, |
| PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | |
| PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1)); |
| |
| hose->first_busno = 0; |
| hose->last_busno = 0xff; |
| |
| /* PCI memory prefetch space */ |
| pci_set_region(hose->regions + 0, |
| CONFIG_SYS_PCI_MEM_BASE, |
| CONFIG_SYS_PCI_MEM_PHYS, |
| CONFIG_SYS_PCI_MEM_SIZE, |
| PCI_REGION_MEM|PCI_REGION_PREFETCH); |
| |
| /* PCI memory space */ |
| pci_set_region(hose->regions + 1, |
| CONFIG_SYS_PCI_MMIO_BASE, |
| CONFIG_SYS_PCI_MMIO_PHYS, |
| CONFIG_SYS_PCI_MMIO_SIZE, |
| PCI_REGION_MEM); |
| |
| /* PCI IO space */ |
| pci_set_region(hose->regions + 2, |
| CONFIG_SYS_PCI_IO_BASE, |
| CONFIG_SYS_PCI_IO_PHYS, |
| CONFIG_SYS_PCI_IO_SIZE, |
| PCI_REGION_IO); |
| |
| /* System memory space */ |
| pci_set_region(hose->regions + 3, |
| CONFIG_PCI_SYS_MEM_BUS, |
| CONFIG_PCI_SYS_MEM_PHYS, |
| gd->ram_size, |
| PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); |
| |
| hose->region_count = 4; |
| |
| pci_setup_indirect(hose, |
| (CONFIG_SYS_IMMR + 0x8300), |
| (CONFIG_SYS_IMMR + 0x8304)); |
| |
| pci_register_hose(hose); |
| |
| /* |
| * Write to Command register |
| */ |
| reg16 = 0xff; |
| dev = PCI_BDF(hose->first_busno, 0, 0); |
| pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); |
| reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |
| pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); |
| |
| /* |
| * Clear non-reserved bits in status register. |
| */ |
| pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); |
| pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); |
| pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); |
| |
| #ifdef CONFIG_PCI_SCAN_SHOW |
| printf("PCI: Bus Dev VenId DevId Class Int\n"); |
| #endif |
| /* |
| * Hose scan. |
| */ |
| hose->last_busno = pci_hose_scan(hose); |
| } |
| |
| #if defined(CONFIG_OF_LIBFDT) |
| void ft_pci_setup(void *blob, bd_t *bd) |
| { |
| int nodeoffset; |
| int tmp[2]; |
| const char *path; |
| |
| nodeoffset = fdt_path_offset(blob, "/aliases"); |
| if (nodeoffset >= 0) { |
| path = fdt_getprop(blob, nodeoffset, "pci", NULL); |
| if (path) { |
| tmp[0] = cpu_to_be32(pci_hose.first_busno); |
| tmp[1] = cpu_to_be32(pci_hose.last_busno); |
| do_fixup_by_path(blob, path, "bus-range", |
| &tmp, sizeof(tmp), 1); |
| |
| tmp[0] = cpu_to_be32(gd->pci_clk); |
| do_fixup_by_path(blob, path, "clock-frequency", |
| &tmp, sizeof(tmp[0]), 1); |
| } |
| } |
| } |
| #endif /* CONFIG_OF_LIBFDT */ |