| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2023 Texas Instruments Incorporated - https://www.ti.com/ |
| * Nikhil M Jain, n-jain1@ti.com |
| * |
| * based on the linux tidss driver, which is |
| * |
| * (C) Copyright 2018 Texas Instruments Incorporated - https://www.ti.com/ |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <clk.h> |
| #include <log.h> |
| #include <video.h> |
| #include <errno.h> |
| #include <panel.h> |
| #include <reset.h> |
| #include <malloc.h> |
| #include <fdtdec.h> |
| #include <syscon.h> |
| #include <regmap.h> |
| #include <cpu_func.h> |
| #include <media_bus_format.h> |
| |
| #include <asm/io.h> |
| #include <asm/cache.h> |
| #include <asm/utils.h> |
| #include <asm/bitops.h> |
| |
| #include <dm/devres.h> |
| #include <dm/of_access.h> |
| #include <dm/device_compat.h> |
| #include <dm/device-internal.h> |
| |
| #include <linux/bug.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/iopoll.h> |
| |
| #include "tidss_drv.h" |
| #include "tidss_regs.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Panel parameters */ |
| enum { |
| LCD_MAX_WIDTH = 1920, |
| LCD_MAX_HEIGHT = 1200, |
| LCD_MAX_LOG2_BPP = VIDEO_BPP32, |
| }; |
| |
| static const u16 *dss_common_regmap; |
| |
| static const u16 tidss_am62x_common_regs[DSS_COMMON_REG_TABLE_LEN] = { |
| [DSS_REVISION_OFF] = 0x4, |
| [DSS_SYSCONFIG_OFF] = 0x8, |
| [DSS_SYSSTATUS_OFF] = 0x20, |
| [DSS_IRQ_EOI_OFF] = 0x24, |
| [DSS_IRQSTATUS_RAW_OFF] = 0x28, |
| [DSS_IRQSTATUS_OFF] = 0x2c, |
| [DSS_IRQENABLE_SET_OFF] = 0x30, |
| [DSS_IRQENABLE_CLR_OFF] = 0x40, |
| [DSS_VID_IRQENABLE_OFF] = 0x44, |
| [DSS_VID_IRQSTATUS_OFF] = 0x58, |
| [DSS_VP_IRQENABLE_OFF] = 0x70, |
| [DSS_VP_IRQSTATUS_OFF] = 0x7c, |
| |
| [WB_IRQENABLE_OFF] = 0x88, |
| [WB_IRQSTATUS_OFF] = 0x8c, |
| |
| [DSS_GLOBAL_MFLAG_ATTRIBUTE_OFF] = 0x90, |
| [DSS_GLOBAL_OUTPUT_ENABLE_OFF] = 0x94, |
| [DSS_GLOBAL_BUFFER_OFF] = 0x98, |
| [DSS_CBA_CFG_OFF] = 0x9c, |
| [DSS_DBG_CONTROL_OFF] = 0xa0, |
| [DSS_DBG_STATUS_OFF] = 0xa4, |
| [DSS_CLKGATING_DISABLE_OFF] = 0xa8, |
| [DSS_SECURE_DISABLE_OFF] = 0xac, |
| }; |
| |
| /* TIDSS AM62x Features */ |
| const struct dss_features dss_am625_feats = { |
| .max_pclk_khz = { |
| [DSS_VP_DPI] = 165000, |
| [DSS_VP_OLDI] = 165000, |
| }, |
| |
| .subrev = DSS_AM625, |
| |
| .common = "common", |
| .common_regs = tidss_am62x_common_regs, |
| |
| .num_vps = 2, |
| .vp_name = { "vp1", "vp2" }, |
| .ovr_name = { "ovr1", "ovr2" }, |
| .vpclk_name = { "vp1", "vp2" }, |
| .vp_bus_type = { DSS_VP_OLDI, DSS_VP_DPI }, |
| |
| .vp_feat = { .color = { |
| .has_ctm = true, |
| .gamma_size = 256, |
| .gamma_type = TIDSS_GAMMA_8BIT, |
| }, |
| }, |
| |
| .num_planes = 2, |
| /* note: vid is plane_id 0 and vidl1 is plane_id 1 */ |
| .vid_name = { "vidl1", "vid1" }, |
| .vid_lite = { true, false }, |
| .vid_order = { 1, 0 }, |
| }; |
| |
| /* Wrapper functions to write and read TI_DSS registers */ |
| static void dss_write(struct tidss_drv_priv *priv, u16 reg, u32 val) |
| { |
| writel(val, priv->base_common + reg); |
| } |
| |
| static u32 dss_read(struct tidss_drv_priv *priv, u16 reg) |
| { |
| return readl(priv->base_common + reg); |
| } |
| |
| static void dss_vid_write(struct tidss_drv_priv *priv, u32 hw_plane, u16 reg, u32 val) |
| { |
| void __iomem *base = priv->base_vid[hw_plane]; |
| |
| writel(val, base + reg); |
| } |
| |
| static u32 dss_vid_read(struct tidss_drv_priv *priv, u32 hw_plane, u16 reg) |
| { |
| void __iomem *base = priv->base_vid[hw_plane]; |
| |
| return readl(base + reg); |
| } |
| |
| static void dss_ovr_write(struct tidss_drv_priv *priv, u32 hw_videoport, |
| u16 reg, u32 val) |
| { |
| void __iomem *base = priv->base_ovr[hw_videoport]; |
| |
| writel(val, base + reg); |
| } |
| |
| static u32 dss_ovr_read(struct tidss_drv_priv *priv, u32 hw_videoport, u16 reg) |
| { |
| void __iomem *base = priv->base_ovr[hw_videoport]; |
| |
| return readl(base + reg); |
| } |
| |
| static void dss_vp_write(struct tidss_drv_priv *priv, u32 hw_videoport, |
| u16 reg, u32 val) |
| { |
| void __iomem *base = priv->base_vp[hw_videoport]; |
| |
| writel(val, base + reg); |
| } |
| |
| static u32 dss_vp_read(struct tidss_drv_priv *priv, u32 hw_videoport, u16 reg) |
| { |
| void __iomem *base = priv->base_vp[hw_videoport]; |
| |
| return readl(base + reg); |
| } |
| |
| /* generate mask on a register */ |
| static u32 FLD_MASK(u32 start, u32 end) |
| { |
| return ((1 << (start - end + 1)) - 1) << end; |
| } |
| |
| /* set the given val in specified range */ |
| static u32 FLD_VAL(u32 val, u32 start, u32 end) |
| { |
| return (val << end) & FLD_MASK(start, end); |
| } |
| |
| /* return the value in the specified range */ |
| static u32 FLD_GET(u32 val, u32 start, u32 end) |
| { |
| return (val & FLD_MASK(start, end)) >> end; |
| } |
| |
| /* modify the value of the specified range */ |
| static u32 FLD_MOD(u32 orig, u32 val, u32 start, u32 end) |
| { |
| return (orig & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end); |
| } |
| |
| /* read and modify common register region of DSS*/ |
| __maybe_unused |
| static u32 REG_GET(struct tidss_drv_priv *priv, u32 idx, u32 start, u32 end) |
| { |
| return FLD_GET(dss_read(priv, idx), start, end); |
| } |
| |
| static void REG_FLD_MOD(struct tidss_drv_priv *priv, u32 idx, u32 val, |
| u32 start, u32 end) |
| { |
| dss_write(priv, idx, FLD_MOD(dss_read(priv, idx), val, |
| start, end)); |
| } |
| |
| /* read and modify planes vid1 and vid2 register of DSS*/ |
| static u32 VID_REG_GET(struct tidss_drv_priv *priv, u32 hw_plane, u32 idx, |
| u32 start, u32 end) |
| { |
| return FLD_GET(dss_vid_read(priv, hw_plane, idx), start, end); |
| } |
| |
| static void VID_REG_FLD_MOD(struct tidss_drv_priv *priv, u32 hw_plane, u32 idx, |
| u32 val, u32 start, u32 end) |
| { |
| dss_vid_write(priv, hw_plane, idx, |
| FLD_MOD(dss_vid_read(priv, hw_plane, idx), |
| val, start, end)); |
| } |
| |
| /* read and modify port vid1 and vid2 registers of DSS*/ |
| __maybe_unused |
| static u32 VP_REG_GET(struct tidss_drv_priv *priv, u32 vp, u32 idx, |
| u32 start, u32 end) |
| { |
| return FLD_GET(dss_vp_read(priv, vp, idx), start, end); |
| } |
| |
| static void VP_REG_FLD_MOD(struct tidss_drv_priv *priv, u32 vp, u32 idx, u32 val, |
| u32 start, u32 end) |
| { |
| dss_vp_write(priv, vp, idx, FLD_MOD(dss_vp_read(priv, vp, idx), |
| val, start, end)); |
| } |
| |
| /* read and modify overlay ovr1 and ovr2 registers of DSS*/ |
| __maybe_unused |
| static u32 OVR_REG_GET(struct tidss_drv_priv *priv, u32 ovr, u32 idx, |
| u32 start, u32 end) |
| { |
| return FLD_GET(dss_ovr_read(priv, ovr, idx), start, end); |
| } |
| |
| static void OVR_REG_FLD_MOD(struct tidss_drv_priv *priv, u32 ovr, u32 idx, |
| u32 val, u32 start, u32 end) |
| { |
| dss_ovr_write(priv, ovr, idx, FLD_MOD(dss_ovr_read(priv, ovr, idx), |
| val, start, end)); |
| } |
| |
| static void dss_oldi_tx_power(struct tidss_drv_priv *priv, bool power) |
| { |
| u32 val; |
| |
| if (WARN_ON(!priv->oldi_io_ctrl)) |
| return; |
| |
| if (priv->feat->subrev == DSS_AM625) { |
| if (power) { |
| switch (priv->oldi_mode) { |
| case OLDI_SINGLE_LINK_SINGLE_MODE: |
| /* Power down OLDI TX 1 */ |
| val = OLDI1_PWRDN_TX; |
| break; |
| case OLDI_DUAL_LINK: |
| /* No Power down */ |
| val = 0; |
| break; |
| default: |
| /* Power down both the OLDI TXes */ |
| val = OLDI_BANDGAP_PWR | OLDI0_PWRDN_TX | OLDI1_PWRDN_TX; |
| break; |
| } |
| } else { |
| val = OLDI_BANDGAP_PWR | OLDI0_PWRDN_TX | OLDI1_PWRDN_TX; |
| } |
| regmap_update_bits(priv->oldi_io_ctrl, OLDI_PD_CTRL, |
| OLDI_BANDGAP_PWR | OLDI0_PWRDN_TX | OLDI1_PWRDN_TX, val); |
| } |
| } |
| |
| static void dss_set_num_datalines(struct tidss_drv_priv *priv, |
| u32 hw_videoport) |
| { |
| int v; |
| u32 num_lines = priv->bus_format->data_width; |
| |
| switch (num_lines) { |
| case 12: |
| v = 0; break; |
| case 16: |
| v = 1; break; |
| case 18: |
| v = 2; break; |
| case 24: |
| v = 3; break; |
| case 30: |
| v = 4; break; |
| case 36: |
| v = 5; break; |
| default: |
| WARN_ON(1); |
| v = 3; |
| } |
| |
| VP_REG_FLD_MOD(priv, hw_videoport, DSS_VP_CONTROL, v, 10, 8); |
| } |
| |
| static void dss_enable_oldi(struct tidss_drv_priv *priv, u32 hw_videoport) |
| { |
| u32 oldi_cfg = 0; |
| u32 oldi_reset_bit = BIT(5 + hw_videoport); |
| int count = 0; |
| |
| /* |
| * For the moment MASTERSLAVE, and SRC bits of DSS_VP_DSS_OLDI_CFG are |
| * set statically to 0. |
| */ |
| |
| if (priv->bus_format->data_width == 24) |
| oldi_cfg |= BIT(8); /* MSB */ |
| else if (priv->bus_format->data_width != 18) |
| dev_warn(priv->dev, "%s: %d port width not supported\n", |
| __func__, priv->bus_format->data_width); |
| |
| oldi_cfg |= BIT(7); /* DEPOL */ |
| |
| oldi_cfg = FLD_MOD(oldi_cfg, priv->bus_format->oldi_mode_reg_val, 3, 1); |
| |
| oldi_cfg |= BIT(12); /* SOFTRST */ |
| |
| oldi_cfg |= BIT(0); /* ENABLE */ |
| |
| switch (priv->oldi_mode) { |
| case OLDI_MODE_OFF: |
| oldi_cfg &= ~BIT(0); /* DISABLE */ |
| break; |
| |
| case OLDI_SINGLE_LINK_SINGLE_MODE: |
| /* All configuration is done for this mode. */ |
| break; |
| |
| case OLDI_SINGLE_LINK_DUPLICATE_MODE: |
| oldi_cfg |= BIT(5); /* DUPLICATE MODE */ |
| break; |
| |
| case OLDI_DUAL_LINK: |
| oldi_cfg |= BIT(11); /* DUALMODESYNC */ |
| oldi_cfg |= BIT(3); /* data-mapping field also indicates dual-link mode */ |
| break; |
| |
| default: |
| dev_warn(priv->dev, "%s: Incorrect oldi mode. Returning.\n", |
| __func__); |
| return; |
| } |
| |
| dss_vp_write(priv, hw_videoport, DSS_VP_DSS_OLDI_CFG, oldi_cfg); |
| |
| while (!(oldi_reset_bit & dss_read(priv, DSS_SYSSTATUS)) && |
| count < 10000) |
| count++; |
| |
| if (!(oldi_reset_bit & dss_read(priv, DSS_SYSSTATUS))) |
| dev_warn(priv->dev, "%s: timeout waiting OLDI reset done\n", |
| __func__); |
| } |
| |
| static const struct dss_color_lut dss_vp_gamma_default_lut[] = { |
| { .red = 0, .green = 0, .blue = 0, }, |
| { .red = U16_MAX, .green = U16_MAX, .blue = U16_MAX, }, |
| }; |
| |
| static void dss_vp_write_gamma_table(struct tidss_drv_priv *priv, |
| u32 hw_videoport) |
| { |
| u32 *table = priv->vp_data[hw_videoport].gamma_table; |
| u32 hwlen = priv->feat->vp_feat.color.gamma_size; |
| unsigned int i; |
| |
| dev_dbg(priv->dev, "%s: hw_videoport %d\n", __func__, hw_videoport); |
| |
| for (i = 0; i < hwlen; ++i) { |
| u32 v = table[i]; |
| |
| v |= i << 24; |
| |
| dss_vp_write(priv, hw_videoport, DSS_VP_GAMMA_TABLE, v); |
| } |
| } |
| |
| static void dss_vp_set_gamma(struct tidss_drv_priv *priv, |
| u32 hw_videoport, const struct dss_color_lut *lut, |
| unsigned int length) |
| { |
| u32 *table = priv->vp_data[hw_videoport].gamma_table; |
| u32 hwlen = priv->feat->vp_feat.color.gamma_size; |
| u32 hwbits; |
| unsigned int i; |
| |
| dev_dbg(priv->dev, "%s: hw_videoport %d, lut len %u, hw len %u\n", |
| __func__, hw_videoport, length, hwlen); |
| |
| if (priv->feat->vp_feat.color.gamma_type == TIDSS_GAMMA_10BIT) |
| hwbits = 10; |
| else |
| hwbits = 8; |
| |
| lut = dss_vp_gamma_default_lut; |
| length = ARRAY_SIZE(dss_vp_gamma_default_lut); |
| |
| for (i = 0; i < length - 1; ++i) { |
| unsigned int first = i * (hwlen - 1) / (length - 1); |
| unsigned int last = (i + 1) * (hwlen - 1) / (length - 1); |
| unsigned int w = last - first; |
| u16 r, g, b; |
| unsigned int j; |
| |
| if (w == 0) |
| continue; |
| |
| for (j = 0; j <= w; j++) { |
| r = (lut[i].red * (w - j) + lut[i + 1].red * j) / w; |
| g = (lut[i].green * (w - j) + lut[i + 1].green * j) / w; |
| b = (lut[i].blue * (w - j) + lut[i + 1].blue * j) / w; |
| |
| r >>= 16 - hwbits; |
| g >>= 16 - hwbits; |
| b >>= 16 - hwbits; |
| |
| table[first + j] = (r << (hwbits * 2)) | |
| (g << hwbits) | b; |
| } |
| } |
| |
| dss_vp_write_gamma_table(priv, hw_videoport); |
| } |
| |
| void dss_vp_enable(struct tidss_drv_priv *priv, u32 hw_videoport, struct display_timing *timing) |
| { |
| bool align, onoff, rf, ieo, ipc, ihs, ivs; |
| u32 hsw, hfp, hbp, vsw, vfp, vbp; |
| |
| dss_set_num_datalines(priv, hw_videoport); |
| |
| /* panel parameters to set clocks for video port*/ |
| hfp = timing->hfront_porch.typ; |
| hsw = timing->hsync_len.typ; |
| hbp = timing->hback_porch.typ; |
| vfp = timing->vfront_porch.typ; |
| vsw = timing->vsync_len.typ; |
| vbp = timing->vback_porch.typ; |
| |
| dss_vp_write(priv, hw_videoport, DSS_VP_TIMING_H, |
| FLD_VAL(hsw - 1, 7, 0) | |
| FLD_VAL(hfp - 1, 19, 8) | FLD_VAL(hbp - 1, 31, 20)); |
| |
| dss_vp_write(priv, hw_videoport, DSS_VP_TIMING_V, |
| FLD_VAL(vsw - 1, 7, 0) | |
| FLD_VAL(vfp, 19, 8) | FLD_VAL(vbp, 31, 20)); |
| |
| ivs = !!(timing->flags & (1 << 3)); |
| |
| ihs = !!(timing->flags & (1 << 1)); |
| |
| ieo = 0; |
| |
| ipc = 0; |
| |
| /* always use the 'rf' setting */ |
| onoff = true; |
| |
| rf = true; |
| |
| /* always use aligned syncs */ |
| align = true; |
| |
| /* always use DE_HIGH for OLDI */ |
| if (priv->feat->vp_bus_type[hw_videoport] == DSS_VP_OLDI) |
| ieo = false; |
| |
| dss_vp_write(priv, hw_videoport, DSS_VP_POL_FREQ, |
| FLD_VAL(align, 18, 18) | |
| FLD_VAL(onoff, 17, 17) | |
| FLD_VAL(rf, 16, 16) | |
| FLD_VAL(ieo, 15, 15) | |
| FLD_VAL(ipc, 14, 14) | |
| FLD_VAL(ihs, 13, 13) | |
| FLD_VAL(ivs, 12, 12)); |
| |
| dss_vp_write(priv, hw_videoport, DSS_VP_SIZE_SCREEN, |
| FLD_VAL(timing->hactive.typ - 1, 11, 0) | |
| FLD_VAL(timing->vactive.typ - 1, 27, 16)); |
| |
| VP_REG_FLD_MOD(priv, hw_videoport, DSS_VP_CONTROL, 1, 0, 0); |
| } |
| |
| enum c8_to_c12_mode { C8_TO_C12_REPLICATE, C8_TO_C12_MAX, C8_TO_C12_MIN }; |
| |
| static u16 c8_to_c12(u8 c8, enum c8_to_c12_mode mode) |
| { |
| u16 c12; |
| |
| c12 = c8 << 4; |
| |
| switch (mode) { |
| case C8_TO_C12_REPLICATE: |
| /* Copy c8 4 MSB to 4 LSB for full scale c12 */ |
| c12 |= c8 >> 4; |
| break; |
| case C8_TO_C12_MAX: |
| c12 |= 0xF; |
| break; |
| default: |
| case C8_TO_C12_MIN: |
| break; |
| } |
| |
| return c12; |
| } |
| |
| static u64 argb8888_to_argb12121212(u32 argb8888, enum c8_to_c12_mode m) |
| { |
| u8 a, r, g, b; |
| u64 v; |
| |
| a = (argb8888 >> 24) & 0xff; |
| r = (argb8888 >> 16) & 0xff; |
| g = (argb8888 >> 8) & 0xff; |
| b = (argb8888 >> 0) & 0xff; |
| |
| v = ((u64)c8_to_c12(a, m) << 36) | ((u64)c8_to_c12(r, m) << 24) | |
| ((u64)c8_to_c12(g, m) << 12) | (u64)c8_to_c12(b, m); |
| |
| return v; |
| } |
| |
| static void dss_vp_set_default_color(struct tidss_drv_priv *priv, |
| u32 hw_videoport, u32 default_color) |
| { |
| u64 v; |
| |
| v = argb8888_to_argb12121212(default_color, C8_TO_C12_REPLICATE); |
| dss_ovr_write(priv, hw_videoport, |
| DSS_OVR_DEFAULT_COLOR, v & 0xffffffff); |
| dss_ovr_write(priv, hw_videoport, |
| DSS_OVR_DEFAULT_COLOR2, (v >> 32) & 0xffff); |
| } |
| |
| int dss_vp_enable_clk(struct tidss_drv_priv *priv, u32 hw_videoport) |
| { |
| int ret = clk_prepare_enable(&priv->vp_clk[hw_videoport]); |
| |
| if (ret) |
| dev_dbg(priv->dev, "%s: enabling clk failed: %d\n", __func__, |
| ret); |
| |
| return ret; |
| } |
| |
| void dss_vp_prepare(struct tidss_drv_priv *priv, u32 hw_videoport) |
| { |
| dss_vp_set_gamma(priv, hw_videoport, NULL, 0); |
| dss_vp_set_default_color(priv, 0, 0); |
| |
| if (priv->feat->vp_bus_type[hw_videoport] == DSS_VP_OLDI) { |
| dss_oldi_tx_power(priv, true); |
| dss_enable_oldi(priv, hw_videoport); |
| } |
| } |
| |
| static |
| unsigned int dss_pclk_diff(unsigned long rate, unsigned long real_rate) |
| { |
| int r = rate / 100, rr = real_rate / 100; |
| |
| return (unsigned int)(abs(((rr - r) * 100) / r)); |
| } |
| |
| int dss_vp_set_clk_rate(struct tidss_drv_priv *priv, u32 hw_videoport, |
| unsigned long rate) |
| { |
| int r; |
| unsigned long new_rate; |
| |
| /* |
| * For AM625 OLDI video ports, the requested pixel clock needs to take into account the |
| * serial clock required for the serialization of DPI signals into LVDS signals. The |
| * incoming pixel clock on the OLDI video port gets divided by 7 whenever OLDI enable bit |
| * gets set. |
| */ |
| if (priv->feat->vp_bus_type[hw_videoport] == DSS_VP_OLDI && |
| priv->feat->subrev == DSS_AM625) |
| rate *= 7; |
| |
| r = clk_set_rate(&priv->vp_clk[hw_videoport], rate); |
| |
| new_rate = clk_get_rate(&priv->vp_clk[hw_videoport]); |
| |
| if (dss_pclk_diff(rate, new_rate) > 5) |
| dev_warn(priv->dev, |
| "vp%d: Clock rate %lu differs over 5%% from requested %lu\n", |
| hw_videoport, new_rate, rate); |
| |
| dev_dbg(priv->dev, "vp%d: new rate %lu Hz (requested %lu Hz)\n", |
| hw_videoport, clk_get_rate(&priv->vp_clk[hw_videoport]), rate); |
| return 0; |
| } |
| |
| static void dss_ovr_set_plane(struct tidss_drv_priv *priv, |
| u32 hw_plane, u32 hw_ovr, |
| u32 x, u32 y, u32 layer) |
| { |
| OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer), |
| 0x1, 4, 1); |
| OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer), |
| x, 17, 6); |
| OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer), |
| y, 30, 19); |
| } |
| |
| void dss_ovr_enable_layer(struct tidss_drv_priv *priv, |
| u32 hw_ovr, u32 layer, bool enable) |
| { |
| OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer), |
| !!enable, 0, 0); |
| } |
| |
| static void dss_vid_csc_enable(struct tidss_drv_priv *priv, u32 hw_plane, |
| bool enable) |
| { |
| VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, !!enable, 9, 9); |
| } |
| |
| int dss_plane_setup(struct tidss_drv_priv *priv, u32 hw_plane, u32 hw_videoport) |
| { |
| VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, |
| priv->pixel_format, 6, 1); |
| |
| dss_vid_write(priv, hw_plane, DSS_VID_PICTURE_SIZE, |
| ((LCD_MAX_WIDTH - 1) | ((LCD_MAX_HEIGHT - 1) << 16))); |
| |
| dss_vid_csc_enable(priv, hw_plane, false); |
| |
| dss_vid_write(priv, hw_plane, DSS_VID_GLOBAL_ALPHA, 0xFF); |
| |
| VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, 1, 28, 28); |
| return 0; |
| } |
| |
| int dss_plane_enable(struct tidss_drv_priv *priv, u32 hw_plane, bool enable) |
| { |
| VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, !!enable, 0, 0); |
| |
| return 0; |
| } |
| |
| static u32 dss_vid_get_fifo_size(struct tidss_drv_priv *priv, u32 hw_plane) |
| { |
| return VID_REG_GET(priv, hw_plane, DSS_VID_BUF_SIZE_STATUS, 15, 0); |
| } |
| |
| static void dss_vid_set_mflag_threshold(struct tidss_drv_priv *priv, |
| u32 hw_plane, u32 low, u32 high) |
| { |
| dss_vid_write(priv, hw_plane, DSS_VID_MFLAG_THRESHOLD, |
| FLD_VAL(high, 31, 16) | FLD_VAL(low, 15, 0)); |
| } |
| |
| static |
| void dss_vid_set_buf_threshold(struct tidss_drv_priv *priv, |
| u32 hw_plane, u32 low, u32 high) |
| { |
| dss_vid_write(priv, hw_plane, DSS_VID_BUF_THRESHOLD, |
| FLD_VAL(high, 31, 16) | FLD_VAL(low, 15, 0)); |
| } |
| |
| static void dss_plane_init(struct tidss_drv_priv *priv) |
| { |
| unsigned int hw_plane; |
| u32 cba_lo_pri = 1; |
| u32 cba_hi_pri = 0; |
| |
| REG_FLD_MOD(priv, DSS_CBA_CFG, cba_lo_pri, 2, 0); |
| REG_FLD_MOD(priv, DSS_CBA_CFG, cba_hi_pri, 5, 3); |
| |
| /* MFLAG_CTRL = ENABLED */ |
| REG_FLD_MOD(priv, DSS_GLOBAL_MFLAG_ATTRIBUTE, 2, 1, 0); |
| /* MFLAG_START = MFLAGNORMALSTARTMODE */ |
| REG_FLD_MOD(priv, DSS_GLOBAL_MFLAG_ATTRIBUTE, 0, 6, 6); |
| |
| for (hw_plane = 0; hw_plane < priv->feat->num_planes; hw_plane++) { |
| u32 size = dss_vid_get_fifo_size(priv, hw_plane); |
| u32 thr_low, thr_high; |
| u32 mflag_low, mflag_high; |
| u32 preload; |
| |
| thr_high = size - 1; |
| thr_low = size / 2; |
| |
| mflag_high = size * 2 / 3; |
| mflag_low = size / 3; |
| |
| preload = thr_low; |
| |
| dev_dbg(priv->dev, |
| "%s: bufsize %u, buf_threshold %u/%u, mflag threshold %u/%u preload %u\n", |
| priv->feat->vid_name[hw_plane], |
| size, |
| thr_high, thr_low, |
| mflag_high, mflag_low, |
| preload); |
| |
| dss_vid_set_buf_threshold(priv, hw_plane, |
| thr_low, thr_high); |
| dss_vid_set_mflag_threshold(priv, hw_plane, |
| mflag_low, mflag_high); |
| |
| dss_vid_write(priv, hw_plane, DSS_VID_PRELOAD, preload); |
| |
| /* Prefech up to PRELOAD value */ |
| VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, 0, |
| 19, 19); |
| } |
| } |
| |
| static void dss_vp_init(struct tidss_drv_priv *priv) |
| { |
| unsigned int i; |
| |
| /* Enable the gamma Shadow bit-field for all VPs*/ |
| for (i = 0; i < priv->feat->num_vps; i++) |
| VP_REG_FLD_MOD(priv, i, DSS_VP_CONFIG, 1, 2, 2); |
| } |
| |
| static int dss_init_am65x_oldi_io_ctrl(struct udevice *dev, |
| struct tidss_drv_priv *priv) |
| { |
| struct udevice *syscon; |
| struct regmap *regmap; |
| int ret = 0; |
| |
| ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "ti,am65x-oldi-io-ctrl", |
| &syscon); |
| if (ret) { |
| debug("unable to find ti,am65x-oldi-io-ctrl syscon device (%d)\n", ret); |
| return ret; |
| } |
| |
| /* get grf-reg base address */ |
| regmap = syscon_get_regmap(syscon); |
| if (!regmap) { |
| debug("unable to find rockchip grf regmap\n"); |
| return -ENODEV; |
| } |
| priv->oldi_io_ctrl = regmap; |
| return 0; |
| } |
| |
| static int tidss_drv_probe(struct udevice *dev) |
| { |
| struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
| struct video_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct tidss_drv_priv *priv = dev_get_priv(dev); |
| struct udevice *panel = NULL; |
| struct display_timing timings; |
| unsigned int i; |
| int ret = 0; |
| const char *mode; |
| |
| priv->dev = dev; |
| |
| priv->feat = &dss_am625_feats; |
| |
| /* |
| * set your plane format based on your bmp image |
| * Supported 24bpp and 32bpp bmpimages |
| */ |
| |
| priv->pixel_format = DSS_FORMAT_XRGB8888; |
| |
| dss_common_regmap = priv->feat->common_regs; |
| |
| ret = uclass_first_device_err(UCLASS_PANEL, &panel); |
| if (ret) { |
| if (ret != -ENODEV) |
| dev_err(dev, "panel device error %d\n", ret); |
| return ret; |
| } |
| |
| ret = panel_get_display_timing(panel, &timings); |
| if (ret) { |
| ret = ofnode_decode_panel_timing(dev_ofnode(panel), |
| &timings); |
| if (ret) { |
| dev_err(dev, "decode display timing error %d\n", ret); |
| return ret; |
| } |
| } |
| |
| mode = ofnode_read_string(dev_ofnode(panel), "data-mapping"); |
| if (!mode) { |
| debug("%s: Could not read mode property\n", dev->name); |
| return -EINVAL; |
| } |
| |
| uc_priv->bpix = VIDEO_BPP32; |
| |
| if (!strcmp(mode, "vesa-24")) |
| priv->bus_format = &dss_bus_formats[7]; |
| else |
| priv->bus_format = &dss_bus_formats[8]; |
| |
| /* Common address */ |
| priv->base_common = dev_remap_addr_index(dev, 0); |
| if (!priv->base_common) |
| return -EINVAL; |
| |
| /* plane address setup and enable */ |
| for (i = 0; i < priv->feat->num_planes; i++) { |
| priv->base_vid[i] = dev_remap_addr_index(dev, i + 2); |
| if (!priv->base_vid[i]) |
| return -EINVAL; |
| } |
| |
| dss_vid_write(priv, 0, DSS_VID_BA_0, uc_plat->base & 0xffffffff); |
| dss_vid_write(priv, 0, DSS_VID_BA_EXT_0, (u64)uc_plat->base >> 32); |
| dss_vid_write(priv, 0, DSS_VID_BA_1, uc_plat->base & 0xffffffff); |
| dss_vid_write(priv, 0, DSS_VID_BA_EXT_1, (u64)uc_plat->base >> 32); |
| |
| ret = dss_plane_setup(priv, 0, 0); |
| if (ret) { |
| dss_plane_enable(priv, 0, false); |
| return ret; |
| } |
| |
| dss_plane_enable(priv, 0, true); |
| dss_plane_init(priv); |
| |
| /* video port address clocks and enable */ |
| for (i = 0; i < priv->feat->num_vps; i++) { |
| priv->base_ovr[i] = dev_remap_addr_index(dev, i + 4); |
| priv->base_vp[i] = dev_remap_addr_index(dev, i + 6); |
| } |
| |
| ret = clk_get_by_name(dev, "vp1", &priv->vp_clk[0]); |
| if (ret) { |
| dev_err(dev, "video port %d clock enable error %d\n", i, ret); |
| return ret; |
| } |
| |
| dss_ovr_set_plane(priv, 1, 0, 0, 0, 0); |
| dss_ovr_enable_layer(priv, 0, 0, true); |
| |
| /* Video Port cloks */ |
| dss_vp_enable_clk(priv, 0); |
| |
| dss_vp_set_clk_rate(priv, 0, timings.pixelclock.typ * 1000); |
| |
| priv->oldi_mode = OLDI_MODE_OFF; |
| uc_priv->xsize = timings.hactive.typ; |
| uc_priv->ysize = timings.vactive.typ; |
| if (priv->feat->subrev == DSS_AM65X || priv->feat->subrev == DSS_AM625) { |
| priv->oldi_mode = OLDI_DUAL_LINK; |
| if (priv->oldi_mode) { |
| ret = dss_init_am65x_oldi_io_ctrl(dev, priv); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| dss_vp_prepare(priv, 0); |
| dss_vp_enable(priv, 0, &timings); |
| dss_vp_init(priv); |
| |
| ret = clk_get_by_name(dev, "fck", &priv->fclk); |
| if (ret) { |
| dev_err(dev, "peripheral clock get error %d\n", ret); |
| return ret; |
| } |
| |
| ret = clk_enable(&priv->fclk); |
| if (ret) { |
| dev_err(dev, "peripheral clock enable error %d\n", ret); |
| return ret; |
| } |
| |
| if (IS_ERR(&priv->fclk)) { |
| dev_err(dev, "%s: Failed to get fclk: %ld\n", |
| __func__, PTR_ERR(&priv->fclk)); |
| return PTR_ERR(&priv->fclk); |
| } |
| |
| dev_dbg(dev, "DSS fclk %lu Hz\n", clk_get_rate(&priv->fclk)); |
| |
| video_set_flush_dcache(dev, true); |
| return 0; |
| } |
| |
| static int tidss_drv_remove(struct udevice *dev) |
| { |
| if (CONFIG_IS_ENABLED(VIDEO_REMOVE)) { |
| struct tidss_drv_priv *priv = dev_get_priv(dev); |
| |
| VP_REG_FLD_MOD(priv, 0, DSS_VP_CONTROL, 0, 0, 0); |
| } |
| return 0; |
| } |
| |
| static int tidss_drv_bind(struct udevice *dev) |
| { |
| struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
| |
| uc_plat->size = ((LCD_MAX_WIDTH * LCD_MAX_HEIGHT * |
| (1 << LCD_MAX_LOG2_BPP)) >> 3) + 0x20; |
| return 0; |
| } |
| |
| static const struct udevice_id tidss_drv_ids[] = { |
| { .compatible = "ti,am625-dss" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(tidss_drv) = { |
| .name = "tidss_drv", |
| .id = UCLASS_VIDEO, |
| .of_match = tidss_drv_ids, |
| .bind = tidss_drv_bind, |
| .probe = tidss_drv_probe, |
| .remove = tidss_drv_remove, |
| .priv_auto = sizeof(struct tidss_drv_priv), |
| #if CONFIG_IS_ENABLED(VIDEO_REMOVE) |
| .flags = DM_FLAG_OS_PREPARE, |
| #else |
| .flags = DM_FLAG_OS_PREPARE | DM_FLAG_LEAVE_PD_ON, |
| #endif |
| }; |