| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 - 2015 Xilinx, Inc. |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| |
| #include <common.h> |
| #include <sata.h> |
| #include <ahci.h> |
| #include <scsi.h> |
| #include <malloc.h> |
| #include <wdt.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/psu_init_gpl.h> |
| #include <asm/io.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <usb.h> |
| #include <dwc3-uboot.h> |
| #include <zynqmppl.h> |
| #include <i2c.h> |
| #include <g_dnl.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT) |
| static struct udevice *watchdog_dev; |
| #endif |
| |
| #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \ |
| !defined(CONFIG_SPL_BUILD) |
| static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC; |
| |
| static const struct { |
| u32 id; |
| u32 ver; |
| char *name; |
| bool evexists; |
| } zynqmp_devices[] = { |
| { |
| .id = 0x10, |
| .name = "3eg", |
| }, |
| { |
| .id = 0x10, |
| .ver = 0x2c, |
| .name = "3cg", |
| }, |
| { |
| .id = 0x11, |
| .name = "2eg", |
| }, |
| { |
| .id = 0x11, |
| .ver = 0x2c, |
| .name = "2cg", |
| }, |
| { |
| .id = 0x20, |
| .name = "5ev", |
| .evexists = 1, |
| }, |
| { |
| .id = 0x20, |
| .ver = 0x100, |
| .name = "5eg", |
| .evexists = 1, |
| }, |
| { |
| .id = 0x20, |
| .ver = 0x12c, |
| .name = "5cg", |
| }, |
| { |
| .id = 0x21, |
| .name = "4ev", |
| .evexists = 1, |
| }, |
| { |
| .id = 0x21, |
| .ver = 0x100, |
| .name = "4eg", |
| .evexists = 1, |
| }, |
| { |
| .id = 0x21, |
| .ver = 0x12c, |
| .name = "4cg", |
| }, |
| { |
| .id = 0x30, |
| .name = "7ev", |
| .evexists = 1, |
| }, |
| { |
| .id = 0x30, |
| .ver = 0x100, |
| .name = "7eg", |
| .evexists = 1, |
| }, |
| { |
| .id = 0x30, |
| .ver = 0x12c, |
| .name = "7cg", |
| }, |
| { |
| .id = 0x38, |
| .name = "9eg", |
| }, |
| { |
| .id = 0x38, |
| .ver = 0x2c, |
| .name = "9cg", |
| }, |
| { |
| .id = 0x39, |
| .name = "6eg", |
| }, |
| { |
| .id = 0x39, |
| .ver = 0x2c, |
| .name = "6cg", |
| }, |
| { |
| .id = 0x40, |
| .name = "11eg", |
| }, |
| { /* For testing purpose only */ |
| .id = 0x50, |
| .ver = 0x2c, |
| .name = "15cg", |
| }, |
| { |
| .id = 0x50, |
| .name = "15eg", |
| }, |
| { |
| .id = 0x58, |
| .name = "19eg", |
| }, |
| { |
| .id = 0x59, |
| .name = "17eg", |
| }, |
| { |
| .id = 0x61, |
| .name = "21dr", |
| }, |
| { |
| .id = 0x63, |
| .name = "23dr", |
| }, |
| { |
| .id = 0x65, |
| .name = "25dr", |
| }, |
| { |
| .id = 0x64, |
| .name = "27dr", |
| }, |
| { |
| .id = 0x60, |
| .name = "28dr", |
| }, |
| { |
| .id = 0x62, |
| .name = "29dr", |
| }, |
| }; |
| #endif |
| |
| int chip_id(unsigned char id) |
| { |
| struct pt_regs regs; |
| int val = -EINVAL; |
| |
| if (current_el() != 3) { |
| regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID; |
| regs.regs[1] = 0; |
| regs.regs[2] = 0; |
| regs.regs[3] = 0; |
| |
| smc_call(®s); |
| |
| /* |
| * SMC returns: |
| * regs[0][31:0] = status of the operation |
| * regs[0][63:32] = CSU.IDCODE register |
| * regs[1][31:0] = CSU.version register |
| * regs[1][63:32] = CSU.IDCODE2 register |
| */ |
| switch (id) { |
| case IDCODE: |
| regs.regs[0] = upper_32_bits(regs.regs[0]); |
| regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK | |
| ZYNQMP_CSU_IDCODE_SVD_MASK; |
| regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT; |
| val = regs.regs[0]; |
| break; |
| case VERSION: |
| regs.regs[1] = lower_32_bits(regs.regs[1]); |
| regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK; |
| val = regs.regs[1]; |
| break; |
| case IDCODE2: |
| regs.regs[1] = lower_32_bits(regs.regs[1]); |
| regs.regs[1] >>= ZYNQMP_CSU_VERSION_EMPTY_SHIFT; |
| val = regs.regs[1]; |
| break; |
| default: |
| printf("%s, Invalid Req:0x%x\n", __func__, id); |
| } |
| } else { |
| switch (id) { |
| case IDCODE: |
| val = readl(ZYNQMP_CSU_IDCODE_ADDR); |
| val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK | |
| ZYNQMP_CSU_IDCODE_SVD_MASK; |
| val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT; |
| break; |
| case VERSION: |
| val = readl(ZYNQMP_CSU_VER_ADDR); |
| val &= ZYNQMP_CSU_SILICON_VER_MASK; |
| break; |
| default: |
| printf("%s, Invalid Req:0x%x\n", __func__, id); |
| } |
| } |
| |
| return val; |
| } |
| |
| #define ZYNQMP_VERSION_SIZE 9 |
| #define ZYNQMP_PL_STATUS_BIT 9 |
| #define ZYNQMP_PL_STATUS_MASK BIT(ZYNQMP_PL_STATUS_BIT) |
| #define ZYNQMP_CSU_VERSION_MASK ~(ZYNQMP_PL_STATUS_MASK) |
| |
| #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \ |
| !defined(CONFIG_SPL_BUILD) |
| static char *zynqmp_get_silicon_idcode_name(void) |
| { |
| u32 i, id, ver; |
| char *buf; |
| static char name[ZYNQMP_VERSION_SIZE]; |
| |
| id = chip_id(IDCODE); |
| ver = chip_id(IDCODE2); |
| |
| for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) { |
| if ((zynqmp_devices[i].id == id) && |
| (zynqmp_devices[i].ver == (ver & |
| ZYNQMP_CSU_VERSION_MASK))) { |
| strncat(name, "zu", 2); |
| strncat(name, zynqmp_devices[i].name, |
| ZYNQMP_VERSION_SIZE - 3); |
| break; |
| } |
| } |
| |
| if (i >= ARRAY_SIZE(zynqmp_devices)) |
| return "unknown"; |
| |
| if (!zynqmp_devices[i].evexists) |
| return name; |
| |
| if (ver & ZYNQMP_PL_STATUS_MASK) |
| return name; |
| |
| if (strstr(name, "eg") || strstr(name, "ev")) { |
| buf = strstr(name, "e"); |
| *buf = '\0'; |
| } |
| |
| return name; |
| } |
| #endif |
| |
| int board_early_init_f(void) |
| { |
| int ret = 0; |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP) |
| u32 pm_api_version; |
| |
| pm_api_version = zynqmp_pmufw_version(); |
| printf("PMUFW:\tv%d.%d\n", |
| pm_api_version >> ZYNQMP_PM_VERSION_MAJOR_SHIFT, |
| pm_api_version & ZYNQMP_PM_VERSION_MINOR_MASK); |
| |
| if (pm_api_version < ZYNQMP_PM_VERSION) |
| panic("PMUFW version error. Expected: v%d.%d\n", |
| ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR); |
| #endif |
| |
| #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED) |
| ret = psu_init(); |
| #endif |
| |
| #if defined(CONFIG_WDT) && !defined(CONFIG_SPL_BUILD) |
| /* bss is not cleared at time when watchdog_reset() is called */ |
| watchdog_dev = NULL; |
| #endif |
| |
| return ret; |
| } |
| |
| int board_init(void) |
| { |
| printf("EL Level:\tEL%d\n", current_el()); |
| |
| #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \ |
| !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \ |
| defined(CONFIG_SPL_BUILD)) |
| if (current_el() != 3) { |
| zynqmppl.name = zynqmp_get_silicon_idcode_name(); |
| printf("Chip ID:\t%s\n", zynqmppl.name); |
| fpga_init(); |
| fpga_add(fpga_xilinx, &zynqmppl); |
| } |
| #endif |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT) |
| if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) { |
| debug("Watchdog: Not found by seq!\n"); |
| if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) { |
| puts("Watchdog: Not found!\n"); |
| return 0; |
| } |
| } |
| |
| wdt_start(watchdog_dev, 0, 0); |
| puts("Watchdog: Started\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_WATCHDOG |
| /* Called by macro WATCHDOG_RESET */ |
| void watchdog_reset(void) |
| { |
| # if !defined(CONFIG_SPL_BUILD) |
| static ulong next_reset; |
| ulong now; |
| |
| if (!watchdog_dev) |
| return; |
| |
| now = timer_get_us(); |
| |
| /* Do not reset the watchdog too often */ |
| if (now > next_reset) { |
| wdt_reset(watchdog_dev); |
| next_reset = now + 1000; |
| } |
| # endif |
| } |
| #endif |
| |
| int board_early_init_r(void) |
| { |
| u32 val; |
| |
| if (current_el() != 3) |
| return 0; |
| |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| |
| if (!val) { |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| writel(val, &crlapb_base->timestamp_ref_ctrl); |
| |
| /* Program freq register in System counter */ |
| writel(zynqmp_get_system_timer_freq(), |
| &iou_scntr_secure->base_frequency_id_register); |
| /* And enable system counter */ |
| writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, |
| &iou_scntr_secure->counter_control_register); |
| } |
| return 0; |
| } |
| |
| int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) |
| { |
| #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \ |
| defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \ |
| defined(CONFIG_ZYNQ_EEPROM_BUS) |
| i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS); |
| |
| if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR, |
| CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET, |
| ethaddr, 6)) |
| printf("I2C EEPROM MAC address read failed\n"); |
| #endif |
| |
| return 0; |
| } |
| |
| unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, |
| char * const argv[]) |
| { |
| int ret = 0; |
| |
| if (current_el() > 1) { |
| smp_kick_all_cpus(); |
| dcache_disable(); |
| armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry, |
| ES_TO_AARCH64); |
| } else { |
| printf("FAIL: current EL is not above EL1\n"); |
| ret = EINVAL; |
| } |
| return ret; |
| } |
| |
| #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) |
| int dram_init_banksize(void) |
| { |
| int ret; |
| |
| ret = fdtdec_setup_memory_banksize(); |
| if (ret) |
| return ret; |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_mem_size_base() != 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| #else |
| int dram_init_banksize(void) |
| { |
| #if defined(CONFIG_NR_DRAM_BANKS) |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
| gd->bd->bi_dram[0].size = get_effective_memsize(); |
| #endif |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, |
| CONFIG_SYS_SDRAM_SIZE); |
| |
| return 0; |
| } |
| #endif |
| |
| void reset_cpu(ulong addr) |
| { |
| } |
| |
| static const struct { |
| u32 bit; |
| const char *name; |
| } reset_reasons[] = { |
| { RESET_REASON_DEBUG_SYS, "DEBUG" }, |
| { RESET_REASON_SOFT, "SOFT" }, |
| { RESET_REASON_SRST, "SRST" }, |
| { RESET_REASON_PSONLY, "PS-ONLY" }, |
| { RESET_REASON_PMU, "PMU" }, |
| { RESET_REASON_INTERNAL, "INTERNAL" }, |
| { RESET_REASON_EXTERNAL, "EXTERNAL" }, |
| {} |
| }; |
| |
| static u32 reset_reason(void) |
| { |
| u32 ret; |
| int i; |
| const char *reason = NULL; |
| |
| ret = readl(&crlapb_base->reset_reason); |
| |
| puts("Reset reason:\t"); |
| |
| for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) { |
| if (ret & reset_reasons[i].bit) { |
| reason = reset_reasons[i].name; |
| printf("%s ", reset_reasons[i].name); |
| break; |
| } |
| } |
| |
| puts("\n"); |
| |
| env_set("reset_reason", reason); |
| |
| writel(~0, &crlapb_base->reset_reason); |
| |
| return ret; |
| } |
| |
| int board_late_init(void) |
| { |
| u32 reg = 0; |
| u8 bootmode; |
| struct udevice *dev; |
| int bootseq = -1; |
| int bootseq_len = 0; |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| int ret; |
| |
| if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { |
| debug("Saved variables - Skipping\n"); |
| return 0; |
| } |
| |
| ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, ®); |
| if (ret) |
| return -EINVAL; |
| |
| if (reg >> BOOT_MODE_ALT_SHIFT) |
| reg >>= BOOT_MODE_ALT_SHIFT; |
| |
| bootmode = reg & BOOT_MODES_MASK; |
| |
| puts("Bootmode: "); |
| switch (bootmode) { |
| case USB_MODE: |
| puts("USB_MODE\n"); |
| mode = "usb"; |
| env_set("modeboot", "usb_dfu_spl"); |
| break; |
| case JTAG_MODE: |
| puts("JTAG_MODE\n"); |
| mode = "pxe dhcp"; |
| env_set("modeboot", "jtagboot"); |
| break; |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| mode = "qspi0"; |
| puts("QSPI_MODE\n"); |
| env_set("modeboot", "qspiboot"); |
| break; |
| case EMMC_MODE: |
| puts("EMMC_MODE\n"); |
| mode = "mmc0"; |
| env_set("modeboot", "emmcboot"); |
| break; |
| case SD_MODE: |
| puts("SD_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff160000", &dev)) { |
| puts("Boot from SD0 but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| env_set("modeboot", "sdboot"); |
| break; |
| case SD1_LSHFT_MODE: |
| puts("LVL_SHFT_"); |
| /* fall through */ |
| case SD_MODE1: |
| puts("SD_MODE1\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff170000", &dev)) { |
| puts("Boot from SD1 but without SD1 enabled!\n"); |
| return -1; |
| } |
| debug("mmc1 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| env_set("modeboot", "sdboot"); |
| break; |
| case NAND_MODE: |
| puts("NAND_MODE\n"); |
| mode = "nand0"; |
| env_set("modeboot", "nandboot"); |
| break; |
| default: |
| mode = ""; |
| printf("Invalid Boot Mode:0x%x\n", bootmode); |
| break; |
| } |
| |
| if (bootseq >= 0) { |
| bootseq_len = snprintf(NULL, 0, "%i", bootseq); |
| debug("Bootseq len: %x\n", bootseq_len); |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + |
| bootseq_len); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| if (bootseq >= 0) |
| sprintf(new_targets, "%s%x %s", mode, bootseq, |
| env_targets ? env_targets : ""); |
| else |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| |
| reset_reason(); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: Xilinx ZynqMP\n"); |
| return 0; |
| } |