| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <usb.h> |
| #include <dm/device-internal.h> |
| |
| #include "usb_ether.h" |
| |
| typedef void (*usb_eth_before_probe)(void); |
| typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum, |
| struct ueth_data *ss); |
| typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss, |
| struct eth_device *dev_desc); |
| |
| struct usb_eth_prob_dev { |
| usb_eth_before_probe before_probe; /* optional */ |
| usb_eth_probe probe; |
| usb_eth_get_info get_info; |
| }; |
| |
| /* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */ |
| static const struct usb_eth_prob_dev prob_dev[] = { |
| #ifdef CONFIG_USB_ETHER_ASIX |
| { |
| .before_probe = asix_eth_before_probe, |
| .probe = asix_eth_probe, |
| .get_info = asix_eth_get_info, |
| }, |
| #endif |
| #ifdef CONFIG_USB_ETHER_ASIX88179 |
| { |
| .before_probe = ax88179_eth_before_probe, |
| .probe = ax88179_eth_probe, |
| .get_info = ax88179_eth_get_info, |
| }, |
| #endif |
| #ifdef CONFIG_USB_ETHER_MCS7830 |
| { |
| .before_probe = mcs7830_eth_before_probe, |
| .probe = mcs7830_eth_probe, |
| .get_info = mcs7830_eth_get_info, |
| }, |
| #endif |
| #ifdef CONFIG_USB_ETHER_SMSC95XX |
| { |
| .before_probe = smsc95xx_eth_before_probe, |
| .probe = smsc95xx_eth_probe, |
| .get_info = smsc95xx_eth_get_info, |
| }, |
| #endif |
| { }, /* END */ |
| }; |
| |
| static int usb_max_eth_dev; /* number of highest available usb eth device */ |
| static struct ueth_data usb_eth[USB_MAX_ETH_DEV]; |
| |
| /******************************************************************************* |
| * tell if current ethernet device is a usb dongle |
| */ |
| int is_eth_dev_on_usb_host(void) |
| { |
| int i; |
| struct eth_device *dev = eth_get_dev(); |
| |
| if (dev) { |
| for (i = 0; i < usb_max_eth_dev; i++) |
| if (&usb_eth[i].eth_dev == dev) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Given a USB device, ask each driver if it can support it, and attach it |
| * to the first driver that says 'yes' |
| */ |
| static void probe_valid_drivers(struct usb_device *dev) |
| { |
| struct eth_device *eth; |
| int j; |
| |
| for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) { |
| if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev])) |
| continue; |
| /* |
| * ok, it is a supported eth device. Get info and fill it in |
| */ |
| eth = &usb_eth[usb_max_eth_dev].eth_dev; |
| if (prob_dev[j].get_info(dev, |
| &usb_eth[usb_max_eth_dev], |
| eth)) { |
| /* found proper driver */ |
| /* register with networking stack */ |
| usb_max_eth_dev++; |
| |
| /* |
| * usb_max_eth_dev must be incremented prior to this |
| * call since eth_current_changed (internally called) |
| * relies on it |
| */ |
| eth_register(eth); |
| if (eth_write_hwaddr(eth, "usbeth", |
| usb_max_eth_dev - 1)) |
| puts("Warning: failed to set MAC address\n"); |
| break; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * scan the usb and reports device info |
| * to the user if mode = 1 |
| * returns current device or -1 if no |
| */ |
| int usb_host_eth_scan(int mode) |
| { |
| int i, old_async; |
| |
| if (mode == 1) |
| printf(" scanning usb for ethernet devices... "); |
| |
| old_async = usb_disable_asynch(1); /* asynch transfer not allowed */ |
| |
| /* unregister a previously detected device */ |
| for (i = 0; i < usb_max_eth_dev; i++) |
| eth_unregister(&usb_eth[i].eth_dev); |
| |
| memset(usb_eth, 0, sizeof(usb_eth)); |
| |
| for (i = 0; prob_dev[i].probe; i++) { |
| if (prob_dev[i].before_probe) |
| prob_dev[i].before_probe(); |
| } |
| |
| usb_max_eth_dev = 0; |
| #ifdef CONFIG_DM_USB |
| /* |
| * TODO: We should add USB_DEVICE() declarations to each USB ethernet |
| * driver and then most of this file can be removed. |
| */ |
| struct udevice *bus; |
| struct uclass *uc; |
| int ret; |
| |
| ret = uclass_get(UCLASS_USB, &uc); |
| if (ret) |
| return ret; |
| uclass_foreach_dev(bus, uc) { |
| for (i = 0; i < USB_MAX_DEVICE; i++) { |
| struct usb_device *dev; |
| |
| dev = usb_get_dev_index(bus, i); /* get device */ |
| debug("i=%d, %s\n", i, dev ? dev->dev->name : "(done)"); |
| if (!dev) |
| break; /* no more devices available */ |
| |
| /* |
| * find valid usb_ether driver for this device, |
| * if any |
| */ |
| probe_valid_drivers(dev); |
| |
| /* check limit */ |
| if (usb_max_eth_dev == USB_MAX_ETH_DEV) |
| break; |
| } /* for */ |
| } |
| #else |
| for (i = 0; i < USB_MAX_DEVICE; i++) { |
| struct usb_device *dev; |
| |
| dev = usb_get_dev_index(i); /* get device */ |
| debug("i=%d\n", i); |
| if (!dev) |
| break; /* no more devices available */ |
| |
| /* find valid usb_ether driver for this device, if any */ |
| probe_valid_drivers(dev); |
| |
| /* check limit */ |
| if (usb_max_eth_dev == USB_MAX_ETH_DEV) |
| break; |
| } /* for */ |
| #endif |
| if (usb_max_eth_dev == USB_MAX_ETH_DEV) { |
| printf("max USB Ethernet Device reached: %d stopping\n", |
| usb_max_eth_dev); |
| } |
| usb_disable_asynch(old_async); /* restore asynch value */ |
| printf("%d Ethernet Device(s) found\n", usb_max_eth_dev); |
| if (usb_max_eth_dev > 0) |
| return 0; |
| return -1; |
| } |