include/configs/stm32mp1.h - platform/external/u-boot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
 /*
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  *
  * Configuration settings for the STM32MP15x CPU
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H
 #include <linux/sizes.h>
 #include <asm/arch/stm32.h>

 #ifndef CONFIG_TFABOOT
 /* PSCI support */
 #define CONFIG_ARMV7_PSCI_1_0
 #define CONFIG_ARMV7_SECURE_BASE		STM32_SYSRAM_BASE
 #define CONFIG_ARMV7_SECURE_MAX_SIZE		STM32_SYSRAM_SIZE
 #endif

 /*
  * Configuration of the external SRAM memory used by U-Boot
  */
 #define CONFIG_SYS_SDRAM_BASE			STM32_DDR_BASE
 #define CONFIG_SYS_INIT_SP_ADDR			CONFIG_SYS_TEXT_BASE

 #ifdef CONFIG_STM32MP1_OPTEE
 #define CONFIG_SYS_MEM_TOP_HIDE			SZ_32M
 #endif /* CONFIG_STM32MP1_OPTEE */

 /*
  * Console I/O buffer size
  */
 #define CONFIG_SYS_CBSIZE			SZ_1K

 /*
  * default load address used for command tftp,  bootm , loadb, ...
  */
 #define CONFIG_LOADADDR			0xc2000000
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

 /* ATAGs */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG

 /*
  * For booting Linux, use the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ		SZ_256M

 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN		SZ_32M

 /* SPL support */
 #ifdef CONFIG_SPL
 /* SPL use DDR */
 #define CONFIG_SPL_BSS_START_ADDR	0xC0200000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START	0xC0300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000

 /* limit SYSRAM usage to first 128 KB */
 #define CONFIG_SPL_MAX_SIZE		0x00020000
 #define CONFIG_SPL_STACK		(STM32_SYSRAM_BASE + \
 					 STM32_SYSRAM_SIZE)
 #endif /* #ifdef CONFIG_SPL */
 /*MMC SD*/
 #define CONFIG_SYS_MMC_MAX_DEVICE	3

 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE	1

 /* Ethernet need */
 #ifdef CONFIG_DWC_ETH_QOS
 #define CONFIG_SYS_NONCACHED_MEMORY	(1 * SZ_1M)	/* 1M */
 #define CONFIG_SERVERIP                 192.168.1.1
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_SYS_AUTOLOAD		"no"
 #endif

 #ifdef CONFIG_DM_VIDEO
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_BMP_16BPP
 #define CONFIG_BMP_24BPP
 #define CONFIG_BMP_32BPP
 #endif

 /*****************************************************************************/
 #ifdef CONFIG_DISTRO_DEFAULTS
 /*****************************************************************************/

 #if !defined(CONFIG_SPL_BUILD)

 #ifdef CONFIG_CMD_MMC
 #define BOOT_TARGET_MMC0(func)	func(MMC, mmc, 0)
 #define BOOT_TARGET_MMC1(func)	func(MMC, mmc, 1)
 #define BOOT_TARGET_MMC2(func)	func(MMC, mmc, 2)
 #else
 #define BOOT_TARGET_MMC0(func)
 #define BOOT_TARGET_MMC1(func)
 #define BOOT_TARGET_MMC2(func)
 #endif

 #ifdef CONFIG_NET
 #define BOOT_TARGET_PXE(func)	func(PXE, pxe, na)
 #else
 #define BOOT_TARGET_PXE(func)
 #endif

 #ifdef CONFIG_CMD_UBIFS
 #define BOOT_TARGET_UBIFS(func)	func(UBIFS, ubifs, 0)
 #else
 #define BOOT_TARGET_UBIFS(func)
 #endif

 #define BOOT_TARGET_DEVICES(func)	\
 	BOOT_TARGET_MMC1(func)		\
 	BOOT_TARGET_UBIFS(func)		\
 	BOOT_TARGET_MMC0(func)		\
 	BOOT_TARGET_MMC2(func)		\
 	BOOT_TARGET_PXE(func)

 /*
  * bootcmd for stm32mp1:
  * for serial/usb: execute the stm32prog command
  * for mmc boot (eMMC, SD card), boot only on the same device
  * for nand boot, boot with on ubifs partition on nand
  * for nor boot, use the default order
  */
 #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
 	"echo \"Boot over ${boot_device}${boot_instance}!\";" \
 	"if test ${boot_device} = serial || test ${boot_device} = usb;" \
 	"then stm32prog ${boot_device} ${boot_instance}; " \
 	"else " \
 		"run env_check;" \
 		"if test ${boot_device} = mmc;" \
 		"then env set boot_targets \"mmc${boot_instance}\"; fi;" \
 		"if test ${boot_device} = nand;" \
 		"then env set boot_targets ubifs0; fi;" \
 		"run distro_bootcmd;" \
 	"fi;\0"

 #include <config_distro_bootcmd.h>

 #ifdef CONFIG_STM32MP1_OPTEE
 /* with OPTEE: define specific MTD partitions = teeh, teed, teex */
 #define STM32MP_MTDPARTS \
 	"mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),256k(teeh),256k(teed),256k(teex),-(nor_user)\0" \
 	"mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),512k(teeh),512k(teed),512k(teex),-(UBI)\0" \
 	"mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),"\
 		"512k(teeh),512k(teed),512k(teex),-(UBI)\0"

 #else /* CONFIG_STM32MP1_OPTEE */
 #define STM32MP_MTDPARTS \
 	"mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \
 	"mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0" \
 	"mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0"

 #endif /* CONFIG_STM32MP1_OPTEE */

 #ifndef CONFIG_SYS_MTDPARTS_RUNTIME
 #undef STM32MP_MTDPARTS
 #define STM32MP_MTDPARTS
 #endif

 #define STM32MP_DFU_ALT_RAM \
 	"dfu_alt_info_ram=ram 0=" \
 		"uImage ram ${kernel_addr_r} 0x2000000;" \
 		"devicetree.dtb ram ${fdt_addr_r} 0x100000;" \
 		"uramdisk.image.gz ram ${ramdisk_addr_r} 0x10000000\0"

 #ifdef CONFIG_SET_DFU_ALT_INFO
 #define STM32MP_DFU_ALT_INFO \
 	"dfu_alt_info_nor0=mtd nor0=" \
 		"nor_fsbl1 part 1;nor_fsbl2 part 2;" \
 		"nor_ssbl part 3;nor_env part 4\0" \
 	"dfu_alt_info_nand0=mtd nand0="\
 		"nand_fsbl part 1;nand_ssbl1 part 2;" \
 		"nand_ssbl2 part 3;nand_UBI partubi 4\0" \
 	"dfu_alt_info_spi-nand0=mtd spi-nand0="\
 		"spi-nand_fsbl part 1;spi-nand_ssbl1 part 2;" \
 		"spi-nand_ssbl2 part 3;spi-nand_UBI partubi 4\0" \
 	"dfu_alt_info_mmc0=mmc 0=" \
 		"sdcard_fsbl1 part 0 1;sdcard_fsbl2 part 0 2;" \
 		"sdcard_ssbl part 0 3;sdcard_bootfs part 0 4;" \
 		"sdcard_vendorfs part 0 5;sdcard_rootfs part 0 6;" \
 		"sdcard_userfs part 0 7\0" \
 	"dfu_alt_info_mmc1=mmc 1=" \
 		"emmc_fsbl1 raw 0x0 0x200 mmcpart 1;" \
 		"emmc_fsbl2 raw 0x0 0x200 mmcpart 2;emmc_ssbl part 1 1;" \
 		"emmc_bootfs part 1 2;emmc_vendorfs part 1 3;" \
 		"emmc_rootfs part 1 4;emmc_userfs part 1 5\0"
 #else
 #define STM32MP_DFU_ALT_INFO
 #endif

 /*
  * memory layout for 32M uncompressed/compressed kernel,
  * 1M fdt, 1M script, 1M pxe and 1M for splashimage
  * and the ramdisk at the end.
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootdelay=1\0" \
 	"kernel_addr_r=0xc2000000\0" \
 	"fdt_addr_r=0xc4000000\0" \
 	"scriptaddr=0xc4100000\0" \
 	"pxefile_addr_r=0xc4200000\0" \
 	"splashimage=0xc4300000\0"  \
 	"ramdisk_addr_r=0xc4400000\0" \
 	"altbootcmd=run bootcmd\0" \
 	"env_default=1\0" \
 	"env_check=if test $env_default -eq 1;"\
 		" then env set env_default 0;env save;fi\0" \
 	STM32MP_BOOTCMD \
 	STM32MP_MTDPARTS \
 	STM32MP_DFU_ALT_RAM \
 	STM32MP_DFU_ALT_INFO \
 	BOOTENV \
 	"boot_net_usb_start=true\0"

 #endif /* ifndef CONFIG_SPL_BUILD */
 #endif /* ifdef CONFIG_DISTRO_DEFAULTS*/

 #endif /* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
	/*
	* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
	*
	* Configuration settings for the STM32MP15x CPU
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H
	#include <linux/sizes.h>
	#include <asm/arch/stm32.h>

	#ifndef CONFIG_TFABOOT
	/* PSCI support */
	#define CONFIG_ARMV7_PSCI_1_0
	#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
	#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
	#endif

	/*
	* Configuration of the external SRAM memory used by U-Boot
	*/
	#define CONFIG_SYS_SDRAM_BASE STM32_DDR_BASE
	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE

	#ifdef CONFIG_STM32MP1_OPTEE
	#define CONFIG_SYS_MEM_TOP_HIDE SZ_32M
	#endif /* CONFIG_STM32MP1_OPTEE */

	/*
	* Console I/O buffer size
	*/
	#define CONFIG_SYS_CBSIZE SZ_1K

	/*
	* default load address used for command tftp, bootm , loadb, ...
	*/
	#define CONFIG_LOADADDR 0xc2000000
	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	/* ATAGs */
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG

	/*
	* For booting Linux, use the first 256 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ SZ_256M

	/* Extend size of kernel image for uncompression */
	#define CONFIG_SYS_BOOTM_LEN SZ_32M

	/* SPL support */
	#ifdef CONFIG_SPL
	/* SPL use DDR */
	#define CONFIG_SPL_BSS_START_ADDR 0xC0200000
	#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
	#define CONFIG_SYS_SPL_MALLOC_START 0xC0300000
	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000

	/* limit SYSRAM usage to first 128 KB */
	#define CONFIG_SPL_MAX_SIZE 0x00020000
	#define CONFIG_SPL_STACK (STM32_SYSRAM_BASE + \
	STM32_SYSRAM_SIZE)
	#endif /* #ifdef CONFIG_SPL */
	/MMC SD/
	#define CONFIG_SYS_MMC_MAX_DEVICE 3

	/* NAND support */
	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define CONFIG_SYS_MAX_NAND_DEVICE 1

	/* Ethernet need */
	#ifdef CONFIG_DWC_ETH_QOS
	#define CONFIG_SYS_NONCACHED_MEMORY (1 * SZ_1M) /* 1M */
	#define CONFIG_SERVERIP 192.168.1.1
	#define CONFIG_BOOTP_SERVERIP
	#define CONFIG_SYS_AUTOLOAD "no"
	#endif

	#ifdef CONFIG_DM_VIDEO
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_BMP_16BPP
	#define CONFIG_BMP_24BPP
	#define CONFIG_BMP_32BPP
	#endif

	/*****************************************************************************/
	#ifdef CONFIG_DISTRO_DEFAULTS
	/*****************************************************************************/

	#if !defined(CONFIG_SPL_BUILD)

	#ifdef CONFIG_CMD_MMC
	#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0)
	#define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1)
	#define BOOT_TARGET_MMC2(func) func(MMC, mmc, 2)
	#else
	#define BOOT_TARGET_MMC0(func)
	#define BOOT_TARGET_MMC1(func)
	#define BOOT_TARGET_MMC2(func)
	#endif

	#ifdef CONFIG_NET
	#define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
	#else
	#define BOOT_TARGET_PXE(func)
	#endif

	#ifdef CONFIG_CMD_UBIFS
	#define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0)
	#else
	#define BOOT_TARGET_UBIFS(func)
	#endif

	#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_MMC1(func) \
	BOOT_TARGET_UBIFS(func) \
	BOOT_TARGET_MMC0(func) \
	BOOT_TARGET_MMC2(func) \
	BOOT_TARGET_PXE(func)

	/*
	* bootcmd for stm32mp1:
	* for serial/usb: execute the stm32prog command
	* for mmc boot (eMMC, SD card), boot only on the same device
	* for nand boot, boot with on ubifs partition on nand
	* for nor boot, use the default order
	*/
	#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
	"echo \"Boot over ${boot_device}${boot_instance}!\";" \
	"if test ${boot_device} = serial \|\| test ${boot_device} = usb;" \
	"then stm32prog ${boot_device} ${boot_instance}; " \
	"else " \
	"run env_check;" \
	"if test ${boot_device} = mmc;" \
	"then env set boot_targets \"mmc${boot_instance}\"; fi;" \
	"if test ${boot_device} = nand;" \
	"then env set boot_targets ubifs0; fi;" \
	"run distro_bootcmd;" \
	"fi;\0"

	#include <config_distro_bootcmd.h>

	#ifdef CONFIG_STM32MP1_OPTEE
	/* with OPTEE: define specific MTD partitions = teeh, teed, teex */
	#define STM32MP_MTDPARTS \
	"mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),256k(teeh),256k(teed),256k(teex),-(nor_user)\0" \
	"mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),512k(teeh),512k(teed),512k(teex),-(UBI)\0" \
	"mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),"\
	"512k(teeh),512k(teed),512k(teex),-(UBI)\0"

	#else /* CONFIG_STM32MP1_OPTEE */
	#define STM32MP_MTDPARTS \
	"mtdparts_nor0=256k(fsbl1),256k(fsbl2),2m(ssbl),256k(u-boot-env),-(nor_user)\0" \
	"mtdparts_nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0" \
	"mtdparts_spi-nand0=2m(fsbl),2m(ssbl1),2m(ssbl2),-(UBI)\0"

	#endif /* CONFIG_STM32MP1_OPTEE */

	#ifndef CONFIG_SYS_MTDPARTS_RUNTIME
	#undef STM32MP_MTDPARTS
	#define STM32MP_MTDPARTS
	#endif

	#define STM32MP_DFU_ALT_RAM \
	"dfu_alt_info_ram=ram 0=" \
	"uImage ram ${kernel_addr_r} 0x2000000;" \
	"devicetree.dtb ram ${fdt_addr_r} 0x100000;" \
	"uramdisk.image.gz ram ${ramdisk_addr_r} 0x10000000\0"

	#ifdef CONFIG_SET_DFU_ALT_INFO
	#define STM32MP_DFU_ALT_INFO \
	"dfu_alt_info_nor0=mtd nor0=" \
	"nor_fsbl1 part 1;nor_fsbl2 part 2;" \
	"nor_ssbl part 3;nor_env part 4\0" \
	"dfu_alt_info_nand0=mtd nand0="\
	"nand_fsbl part 1;nand_ssbl1 part 2;" \
	"nand_ssbl2 part 3;nand_UBI partubi 4\0" \
	"dfu_alt_info_spi-nand0=mtd spi-nand0="\
	"spi-nand_fsbl part 1;spi-nand_ssbl1 part 2;" \
	"spi-nand_ssbl2 part 3;spi-nand_UBI partubi 4\0" \
	"dfu_alt_info_mmc0=mmc 0=" \
	"sdcard_fsbl1 part 0 1;sdcard_fsbl2 part 0 2;" \
	"sdcard_ssbl part 0 3;sdcard_bootfs part 0 4;" \
	"sdcard_vendorfs part 0 5;sdcard_rootfs part 0 6;" \
	"sdcard_userfs part 0 7\0" \
	"dfu_alt_info_mmc1=mmc 1=" \
	"emmc_fsbl1 raw 0x0 0x200 mmcpart 1;" \
	"emmc_fsbl2 raw 0x0 0x200 mmcpart 2;emmc_ssbl part 1 1;" \
	"emmc_bootfs part 1 2;emmc_vendorfs part 1 3;" \
	"emmc_rootfs part 1 4;emmc_userfs part 1 5\0"
	#else
	#define STM32MP_DFU_ALT_INFO
	#endif

	/*
	* memory layout for 32M uncompressed/compressed kernel,
	* 1M fdt, 1M script, 1M pxe and 1M for splashimage
	* and the ramdisk at the end.
	*/
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdelay=1\0" \
	"kernel_addr_r=0xc2000000\0" \
	"fdt_addr_r=0xc4000000\0" \
	"scriptaddr=0xc4100000\0" \
	"pxefile_addr_r=0xc4200000\0" \
	"splashimage=0xc4300000\0" \
	"ramdisk_addr_r=0xc4400000\0" \
	"altbootcmd=run bootcmd\0" \
	"env_default=1\0" \
	"env_check=if test $env_default -eq 1;"\
	" then env set env_default 0;env save;fi\0" \
	STM32MP_BOOTCMD \
	STM32MP_MTDPARTS \
	STM32MP_DFU_ALT_RAM \
	STM32MP_DFU_ALT_INFO \
	BOOTENV \
	"boot_net_usb_start=true\0"

	#endif /* ifndef CONFIG_SPL_BUILD */
	#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/

	#endif /* __CONFIG_H */