| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for K2G SOC |
| * |
| * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| model = "Texas Instruments K2G SoC"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| |
| chosen { }; |
| |
| aliases { |
| serial0 = &uart0; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| spi2 = &spi2; |
| spi3 = &spi3; |
| spi4 = &qspi; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| interrupt-parent = <&gic>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a15"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| }; |
| |
| gic: interrupt-controller@2561000 { |
| compatible = "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x02561000 0x0 0x1000>, |
| <0x0 0x02562000 0x0 0x2000>, |
| <0x0 0x02564000 0x0 0x1000>, |
| <0x0 0x02566000 0x0 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | |
| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "ti,keystone","simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| uart0: serial@02530c00 { |
| compatible = "ns16550a"; |
| current-speed = <115200>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| reg = <0x02530c00 0x100>; |
| clock-names = "uart"; |
| interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| mdio: mdio@4200f00 { |
| compatible = "ti,keystone_mdio", "ti,davinci_mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| /* power-domains = <&k2g_pds K2G_DEV_NSS0>; */ |
| /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_ESW_CLK>; */ |
| clock-names = "fck"; |
| reg = <0x04200f00 0x100>; |
| status = "disabled"; |
| bus_freq = <2500000>; |
| }; |
| |
| qspi: qspi@2940000 { |
| compatible = "cdns,qspi-nor"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x02940000 0x1000>, |
| <0x24000000 0x4000000>; |
| interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>; |
| num-cs = <4>; |
| cdns,fifo-depth = <256>; |
| cdns,fifo-width = <4>; |
| cdns,trigger-address = <0x24000000>; |
| status = "disabled"; |
| }; |
| |
| #include "keystone-k2g-netcp.dtsi" |
| |
| pmmc: pmmc@2900000 { |
| compatible = "ti,power-processor"; |
| reg = <0x02900000 0x40000>; |
| ti,lpsc_module = <1>; |
| }; |
| |
| spi0: spi@21805400 { |
| compatible = "ti,keystone-spi", "ti,dm6441-spi"; |
| reg = <0x21805400 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@21805800 { |
| compatible = "ti,keystone-spi", "ti,dm6441-spi"; |
| reg = <0x21805800 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@21805c00 { |
| compatible = "ti,keystone-spi", "ti,dm6441-spi"; |
| reg = <0x21805C00 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@21806000 { |
| compatible = "ti,keystone-spi", "ti,dm6441-spi"; |
| reg = <0x21806000 0x200>; |
| num-cs = <4>; |
| ti,davinci-spi-intr-line = <0>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| i2c0: i2c@2530000 { |
| compatible = "ti,keystone-i2c"; |
| reg = <0x02530000 0x400>; |
| clock-frequency = <100000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2530400 { |
| compatible = "ti,keystone-i2c"; |
| reg = <0x02530400 0x400>; |
| clock-frequency = <100000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@2530800 { |
| compatible = "ti,keystone-i2c"; |
| reg = <0x02530800 0x400>; |
| clock-frequency = <100000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| mmc0: mmc@23000000 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x23000000 0x400>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>; |
| bus-width = <4>; |
| ti,needs-special-reset; |
| no-1-8-v; |
| max-frequency = <96000000>; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@23100000 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x23100000 0x400>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>; |
| bus-width = <8>; |
| ti,needs-special-reset; |
| ti,non-removable; |
| max-frequency = <96000000>; |
| status = "disabled"; |
| clock-names = "fck"; |
| }; |
| |
| usb0_phy: usb-phy@0 { |
| compatible = "usb-nop-xceiv"; |
| status = "disabled"; |
| }; |
| |
| keystone_usb0: keystone-dwc3@2680000 { |
| compatible = "ti,keystone-dwc3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x2680000 0x10000>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; |
| ranges; |
| dma-coherent; |
| dma-ranges; |
| status = "disabled"; |
| /*power-domains = <&k2g_pds 0x0016>;*/ |
| |
| usb0: usb@2690000 { |
| compatible = "snps,dwc3"; |
| reg = <0x2690000 0x10000>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| /*usb-phy = <&usb0_phy>;*/ |
| status = "disabled"; |
| }; |
| }; |
| |
| usb1_phy: usb-phy@1 { |
| compatible = "usb-nop-xceiv"; |
| status = "disabled"; |
| }; |
| |
| keystone_usb1: keystone-dwc3@2580000 { |
| compatible = "ti,keystone-dwc3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x2580000 0x10000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| ranges; |
| dma-coherent; |
| dma-ranges; |
| status = "disabled"; |
| /*power-domains = <&k2g_pds 0x0017>;*/ |
| |
| usb1: usb@2590000 { |
| compatible = "snps,dwc3"; |
| reg = <0x2590000 0x10000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| maximum-speed = "high-speed"; |
| dr_mode = "otg"; |
| /*usb-phy = <&usb1_phy>;*/ |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |