| // SPDX-License-Identifier: GPL-2.0 |
| &l4_cfg { /* 0x4a000000 */ |
| compatible = "ti,omap4-l4-cfg", "simple-bus"; |
| reg = <0x4a000000 0x800>, |
| <0x4a000800 0x800>, |
| <0x4a001000 0x1000>; |
| reg-names = "ap", "la", "ia0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */ |
| <0x00080000 0x4a080000 0x080000>, /* segment 1 */ |
| <0x00100000 0x4a100000 0x080000>, /* segment 2 */ |
| <0x00180000 0x4a180000 0x080000>, /* segment 3 */ |
| <0x00200000 0x4a200000 0x080000>, /* segment 4 */ |
| <0x00280000 0x4a280000 0x080000>, /* segment 5 */ |
| <0x00300000 0x4a300000 0x080000>; /* segment 6 */ |
| |
| segment@0 { /* 0x4a000000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ |
| <0x00001000 0x00001000 0x001000>, /* ap 1 */ |
| <0x00000800 0x00000800 0x000800>, /* ap 2 */ |
| <0x00002000 0x00002000 0x001000>, /* ap 3 */ |
| <0x00003000 0x00003000 0x001000>, /* ap 4 */ |
| <0x00004000 0x00004000 0x001000>, /* ap 5 */ |
| <0x00005000 0x00005000 0x001000>, /* ap 6 */ |
| <0x00056000 0x00056000 0x001000>, /* ap 7 */ |
| <0x00057000 0x00057000 0x001000>, /* ap 8 */ |
| <0x0005c000 0x0005c000 0x001000>, /* ap 9 */ |
| <0x00058000 0x00058000 0x004000>, /* ap 10 */ |
| <0x00062000 0x00062000 0x001000>, /* ap 11 */ |
| <0x00063000 0x00063000 0x001000>, /* ap 12 */ |
| <0x00008000 0x00008000 0x002000>, /* ap 23 */ |
| <0x0000a000 0x0000a000 0x001000>, /* ap 24 */ |
| <0x00066000 0x00066000 0x001000>, /* ap 25 */ |
| <0x00067000 0x00067000 0x001000>, /* ap 26 */ |
| <0x0005e000 0x0005e000 0x002000>, /* ap 80 */ |
| <0x00060000 0x00060000 0x001000>, /* ap 81 */ |
| <0x00064000 0x00064000 0x001000>, /* ap 86 */ |
| <0x00065000 0x00065000 0x001000>; /* ap 87 */ |
| |
| target-module@2000 { /* 0x4a002000, ap 3 06.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "ctrl_module_core"; |
| reg = <0x2000 0x4>, |
| <0x2010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2000 0x1000>; |
| |
| omap4_scm_core: scm@0 { |
| compatible = "ti,omap4-scm-core", "simple-bus"; |
| reg = <0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x1000>; |
| |
| scm_conf: scm_conf@0 { |
| compatible = "syscon"; |
| reg = <0x0 0x800>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| omap_control_usb2phy: control-phy@300 { |
| compatible = "ti,control-phy-usb2"; |
| reg = <0x300 0x4>; |
| reg-names = "power"; |
| }; |
| |
| omap_control_usbotg: control-phy@33c { |
| compatible = "ti,control-phy-otghs"; |
| reg = <0x33c 0x4>; |
| reg-names = "otghs_control"; |
| }; |
| }; |
| }; |
| |
| target-module@4000 { /* 0x4a004000, ap 5 02.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x4000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4000 0x1000>; |
| |
| cm1: cm1@0 { |
| compatible = "ti,omap4-cm1", "simple-bus"; |
| reg = <0x0 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x2000>; |
| |
| cm1_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cm1_clockdomains: clockdomains { |
| }; |
| }; |
| }; |
| |
| target-module@8000 { /* 0x4a008000, ap 23 32.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x8000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x8000 0x2000>; |
| |
| cm2: cm2@0 { |
| compatible = "ti,omap4-cm2", "simple-bus"; |
| reg = <0x0 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x2000>; |
| |
| cm2_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| cm2_clockdomains: clockdomains { |
| }; |
| }; |
| }; |
| |
| target-module@56000 { /* 0x4a056000, ap 7 0a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x56000 0x4>, |
| <0x5602c 0x4>, |
| <0x56028 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */ |
| clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x56000 0x1000>; |
| |
| sdma: dma-controller@0 { |
| compatible = "ti,omap4430-sdma", "ti,omap-sdma"; |
| reg = <0x0 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| dma-channels = <32>; |
| dma-requests = <127>; |
| }; |
| }; |
| |
| target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x58000 0x4>, |
| <0x58010 0x4>, |
| <0x58014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x58000 0x5000>; |
| |
| hsi: hsi@0 { |
| compatible = "ti,omap4-hsi"; |
| reg = <0x0 0x4000>, |
| <0x5000 0x1000>; |
| reg-names = "sys", "gdd"; |
| |
| clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>; |
| clock-names = "hsi_fck"; |
| |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gdd_mpu"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x4000>; |
| |
| hsi_port1: hsi-port@2000 { |
| compatible = "ti,omap4-hsi-port"; |
| reg = <0x2000 0x800>, |
| <0x2800 0x800>; |
| reg-names = "tx", "rx"; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| hsi_port2: hsi-port@3000 { |
| compatible = "ti,omap4-hsi-port"; |
| reg = <0x3000 0x800>, |
| <0x3800 0x800>; |
| reg-names = "tx", "rx"; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| }; |
| |
| target-module@5e000 { /* 0x4a05e000, ap 80 68.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5e000 0x2000>; |
| }; |
| |
| target-module@62000 { /* 0x4a062000, ap 11 16.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "usb_tll_hs"; |
| reg = <0x62000 0x4>, |
| <0x62010 0x4>, |
| <0x62014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x62000 0x1000>; |
| |
| usbhstll: usbhstll@0 { |
| compatible = "ti,usbhs-tll"; |
| reg = <0x0 0x1000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@64000 { /* 0x4a064000, ap 86 1e.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "usb_host_hs"; |
| reg = <0x64000 0x4>, |
| <0x64010 0x4>, |
| <0x64014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x64000 0x1000>; |
| |
| usbhshost: usbhshost@0 { |
| compatible = "ti,usbhs-host"; |
| reg = <0x0 0x800>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x1000>; |
| clocks = <&init_60m_fclk>, |
| <&xclk60mhsp1_ck>, |
| <&xclk60mhsp2_ck>; |
| clock-names = "refclk_60m_int", |
| "refclk_60m_ext_p1", |
| "refclk_60m_ext_p2"; |
| |
| usbhsohci: ohci@800 { |
| compatible = "ti,ohci-omap3"; |
| reg = <0x800 0x400>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| remote-wakeup-connected; |
| }; |
| |
| usbhsehci: ehci@c00 { |
| compatible = "ti,ehci-omap"; |
| reg = <0xc00 0x400>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| }; |
| |
| target-module@66000 { /* 0x4a066000, ap 25 26.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x66000 0x4>, |
| <0x66010 0x4>, |
| <0x66014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */ |
| clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; |
| clock-names = "fck"; |
| resets = <&prm_tesla 1>; |
| reset-names = "rstctrl"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x66000 0x1000>; |
| |
| mmu_dsp: mmu@0 { |
| compatible = "ti,omap4-iommu"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <0>; |
| }; |
| }; |
| }; |
| |
| segment@80000 { /* 0x4a080000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ |
| <0x0005a000 0x000da000 0x001000>, /* ap 14 */ |
| <0x0005b000 0x000db000 0x001000>, /* ap 15 */ |
| <0x0005c000 0x000dc000 0x001000>, /* ap 16 */ |
| <0x0005d000 0x000dd000 0x001000>, /* ap 17 */ |
| <0x0005e000 0x000de000 0x001000>, /* ap 18 */ |
| <0x00060000 0x000e0000 0x001000>, /* ap 19 */ |
| <0x00061000 0x000e1000 0x001000>, /* ap 20 */ |
| <0x00074000 0x000f4000 0x001000>, /* ap 27 */ |
| <0x00075000 0x000f5000 0x001000>, /* ap 28 */ |
| <0x00076000 0x000f6000 0x001000>, /* ap 29 */ |
| <0x00077000 0x000f7000 0x001000>, /* ap 30 */ |
| <0x00036000 0x000b6000 0x001000>, /* ap 69 */ |
| <0x00037000 0x000b7000 0x001000>, /* ap 70 */ |
| <0x0004d000 0x000cd000 0x001000>, /* ap 78 */ |
| <0x0004e000 0x000ce000 0x001000>, /* ap 79 */ |
| <0x00029000 0x000a9000 0x001000>, /* ap 82 */ |
| <0x0002a000 0x000aa000 0x001000>, /* ap 83 */ |
| <0x0002b000 0x000ab000 0x001000>, /* ap 84 */ |
| <0x0002c000 0x000ac000 0x001000>, /* ap 85 */ |
| <0x0002d000 0x000ad000 0x001000>, /* ap 88 */ |
| <0x0002e000 0x000ae000 0x001000>; /* ap 89 */ |
| |
| target-module@29000 { /* 0x4a0a9000, ap 82 04.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x29000 0x1000>; |
| }; |
| |
| target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x2b400 0x4>, |
| <0x2b404 0x4>, |
| <0x2b408 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2b000 0x1000>; |
| |
| usb_otg_hs: usb_otg_hs@0 { |
| compatible = "ti,omap4-musb"; |
| reg = <0x0 0x7ff>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mc", "dma"; |
| usb-phy = <&usb2_phy>; |
| phys = <&usb2_phy>; |
| phy-names = "usb2-phy"; |
| multipoint = <1>; |
| num-eps = <16>; |
| ram-bits = <12>; |
| ctrl-module = <&omap_control_usbotg>; |
| }; |
| }; |
| |
| target-module@2d000 { /* 0x4a0ad000, ap 88 0c.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x2d000 0x4>, |
| <0x2d010 0x4>, |
| <0x2d014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2d000 0x1000>; |
| |
| ocp2scp@0 { |
| compatible = "ti,omap-ocp2scp"; |
| reg = <0x0 0x1f>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x1000>; |
| usb2_phy: usb2phy@80 { |
| compatible = "ti,omap-usb2"; |
| reg = <0x80 0x58>; |
| ctrl-module = <&omap_control_usb2phy>; |
| clocks = <&usb_phy_cm_clk32k>; |
| clock-names = "wkupclk"; |
| #phy-cells = <0>; |
| }; |
| }; |
| }; |
| |
| /* d2d mdm */ |
| target-module@36000 { /* 0x4a0b6000, ap 69 60.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x36000 0x4>, |
| <0x36010 0x4>, |
| <0x36014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */ |
| clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x36000 0x1000>; |
| }; |
| |
| /* d2d mpu */ |
| target-module@4d000 { /* 0x4a0cd000, ap 78 58.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x4d000 0x4>, |
| <0x4d010 0x4>, |
| <0x4d014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */ |
| clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4d000 0x1000>; |
| }; |
| |
| target-module@59000 { /* 0x4a0d9000, ap 13 1a.0 */ |
| compatible = "ti,sysc-omap4-sr", "ti,sysc"; |
| reg = <0x59038 0x4>; |
| reg-names = "sysc"; |
| ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ |
| clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x59000 0x1000>; |
| |
| smartreflex_mpu: smartreflex@0 { |
| compatible = "ti,omap4-smartreflex-mpu"; |
| reg = <0x0 0x80>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@5b000 { /* 0x4a0db000, ap 15 08.0 */ |
| compatible = "ti,sysc-omap4-sr", "ti,sysc"; |
| reg = <0x5b038 0x4>; |
| reg-names = "sysc"; |
| ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ |
| clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5b000 0x1000>; |
| |
| smartreflex_iva: smartreflex@0 { |
| compatible = "ti,omap4-smartreflex-iva"; |
| reg = <0x0 0x80>; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@5d000 { /* 0x4a0dd000, ap 17 22.0 */ |
| compatible = "ti,sysc-omap4-sr", "ti,sysc"; |
| reg = <0x5d038 0x4>; |
| reg-names = "sysc"; |
| ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */ |
| clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5d000 0x1000>; |
| |
| smartreflex_core: smartreflex@0 { |
| compatible = "ti,omap4-smartreflex-core"; |
| reg = <0x0 0x80>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@60000 { /* 0x4a0e0000, ap 19 1c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x60000 0x1000>; |
| }; |
| |
| target-module@74000 { /* 0x4a0f4000, ap 27 24.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x74000 0x4>, |
| <0x74010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ |
| clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x74000 0x1000>; |
| |
| mailbox: mailbox@0 { |
| compatible = "ti,omap4-mailbox"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <1>; |
| ti,mbox-num-users = <3>; |
| ti,mbox-num-fifos = <8>; |
| mbox_ipu: mbox-ipu { |
| ti,mbox-tx = <0 0 0>; |
| ti,mbox-rx = <1 0 0>; |
| }; |
| mbox_dsp: mbox-dsp { |
| ti,mbox-tx = <3 0 0>; |
| ti,mbox-rx = <2 0 0>; |
| }; |
| }; |
| }; |
| |
| target-module@76000 { /* 0x4a0f6000, ap 29 3a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x76000 0x4>, |
| <0x76010 0x4>, |
| <0x76014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ |
| clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x76000 0x1000>; |
| |
| hwspinlock: spinlock@0 { |
| compatible = "ti,omap4-hwspinlock"; |
| reg = <0x0 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| }; |
| }; |
| |
| segment@100000 { /* 0x4a100000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ |
| <0x00001000 0x00101000 0x001000>, /* ap 22 */ |
| <0x00002000 0x00102000 0x001000>, /* ap 61 */ |
| <0x00003000 0x00103000 0x001000>, /* ap 62 */ |
| <0x00008000 0x00108000 0x001000>, /* ap 63 */ |
| <0x00009000 0x00109000 0x001000>, /* ap 64 */ |
| <0x0000a000 0x0010a000 0x001000>, /* ap 65 */ |
| <0x0000b000 0x0010b000 0x001000>; /* ap 66 */ |
| |
| target-module@0 { /* 0x4a100000, ap 21 2a.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "ctrl_module_pad_core"; |
| reg = <0x0 0x4>, |
| <0x10 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1000>; |
| |
| omap4_pmx_core: pinmux@40 { |
| compatible = "ti,omap4-padconf", |
| "pinctrl-single"; |
| reg = <0x40 0x0196>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <1>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| pinctrl-single,register-width = <16>; |
| pinctrl-single,function-mask = <0x7fff>; |
| }; |
| |
| omap4_padconf_global: omap4_padconf_global@5a0 { |
| compatible = "syscon", |
| "simple-bus"; |
| reg = <0x5a0 0x170>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x5a0 0x170>; |
| |
| pbias_regulator: pbias_regulator@60 { |
| compatible = "ti,pbias-omap4", "ti,pbias-omap"; |
| reg = <0x60 0x4>; |
| syscon = <&omap4_padconf_global>; |
| pbias_mmc_reg: pbias_mmc_omap4 { |
| regulator-name = "pbias_mmc_omap4"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| target-module@2000 { /* 0x4a102000, ap 61 3c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2000 0x1000>; |
| }; |
| |
| target-module@8000 { /* 0x4a108000, ap 63 62.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x8000 0x1000>; |
| }; |
| |
| target-module@a000 { /* 0x4a10a000, ap 65 50.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xa000 0x4>, |
| <0xa010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,sysc-delay-us = <2>; |
| /* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */ |
| clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa000 0x1000>; |
| |
| /* No child device binding or driver in mainline */ |
| }; |
| }; |
| |
| segment@180000 { /* 0x4a180000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| segment@200000 { /* 0x4a200000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ |
| <0x0001f000 0x0021f000 0x001000>, /* ap 32 */ |
| <0x0000a000 0x0020a000 0x001000>, /* ap 33 */ |
| <0x0000b000 0x0020b000 0x001000>, /* ap 34 */ |
| <0x00004000 0x00204000 0x001000>, /* ap 35 */ |
| <0x00005000 0x00205000 0x001000>, /* ap 36 */ |
| <0x00006000 0x00206000 0x001000>, /* ap 37 */ |
| <0x00007000 0x00207000 0x001000>, /* ap 38 */ |
| <0x00012000 0x00212000 0x001000>, /* ap 39 */ |
| <0x00013000 0x00213000 0x001000>, /* ap 40 */ |
| <0x0000c000 0x0020c000 0x001000>, /* ap 41 */ |
| <0x0000d000 0x0020d000 0x001000>, /* ap 42 */ |
| <0x00010000 0x00210000 0x001000>, /* ap 43 */ |
| <0x00011000 0x00211000 0x001000>, /* ap 44 */ |
| <0x00016000 0x00216000 0x001000>, /* ap 45 */ |
| <0x00017000 0x00217000 0x001000>, /* ap 46 */ |
| <0x00014000 0x00214000 0x001000>, /* ap 47 */ |
| <0x00015000 0x00215000 0x001000>, /* ap 48 */ |
| <0x00018000 0x00218000 0x001000>, /* ap 49 */ |
| <0x00019000 0x00219000 0x001000>, /* ap 50 */ |
| <0x00020000 0x00220000 0x001000>, /* ap 51 */ |
| <0x00021000 0x00221000 0x001000>, /* ap 52 */ |
| <0x00026000 0x00226000 0x001000>, /* ap 53 */ |
| <0x00027000 0x00227000 0x001000>, /* ap 54 */ |
| <0x00028000 0x00228000 0x001000>, /* ap 55 */ |
| <0x00029000 0x00229000 0x001000>, /* ap 56 */ |
| <0x0002a000 0x0022a000 0x001000>, /* ap 57 */ |
| <0x0002b000 0x0022b000 0x001000>, /* ap 58 */ |
| <0x0001c000 0x0021c000 0x001000>, /* ap 59 */ |
| <0x0001d000 0x0021d000 0x001000>; /* ap 60 */ |
| |
| target-module@4000 { /* 0x4a204000, ap 35 42.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4000 0x1000>; |
| }; |
| |
| target-module@6000 { /* 0x4a206000, ap 37 4a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6000 0x1000>; |
| }; |
| |
| target-module@a000 { /* 0x4a20a000, ap 33 2c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa000 0x1000>; |
| }; |
| |
| target-module@c000 { /* 0x4a20c000, ap 41 20.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc000 0x1000>; |
| }; |
| |
| target-module@10000 { /* 0x4a210000, ap 43 52.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x10000 0x1000>; |
| }; |
| |
| target-module@12000 { /* 0x4a212000, ap 39 18.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x12000 0x1000>; |
| }; |
| |
| target-module@14000 { /* 0x4a214000, ap 47 30.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x14000 0x1000>; |
| }; |
| |
| target-module@16000 { /* 0x4a216000, ap 45 28.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x16000 0x1000>; |
| }; |
| |
| target-module@18000 { /* 0x4a218000, ap 49 38.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x18000 0x1000>; |
| }; |
| |
| target-module@1c000 { /* 0x4a21c000, ap 59 5a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1c000 0x1000>; |
| }; |
| |
| target-module@1e000 { /* 0x4a21e000, ap 31 10.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x1e000 0x1000>; |
| }; |
| |
| target-module@20000 { /* 0x4a220000, ap 51 40.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000 0x1000>; |
| }; |
| |
| target-module@26000 { /* 0x4a226000, ap 53 34.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x26000 0x1000>; |
| }; |
| |
| target-module@28000 { /* 0x4a228000, ap 55 2e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x28000 0x1000>; |
| }; |
| |
| target-module@2a000 { /* 0x4a22a000, ap 57 48.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2a000 0x1000>; |
| }; |
| }; |
| |
| segment@280000 { /* 0x4a280000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ |
| <0x00040000 0x00340000 0x001000>, /* ap 68 */ |
| <0x00020000 0x00320000 0x004000>, /* ap 71 */ |
| <0x00024000 0x00324000 0x002000>, /* ap 72 */ |
| <0x00026000 0x00326000 0x001000>, /* ap 73 */ |
| <0x00027000 0x00327000 0x001000>, /* ap 74 */ |
| <0x00028000 0x00328000 0x001000>, /* ap 75 */ |
| <0x00029000 0x00329000 0x001000>, /* ap 76 */ |
| <0x00030000 0x00330000 0x010000>, /* ap 77 */ |
| <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ |
| <0x0002c000 0x0032c000 0x004000>; /* ap 91 */ |
| |
| l4_cfg_target_0: target-module@0 { /* 0x4a300000, ap 67 14.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x00020000>, |
| <0x00020000 0x00020000 0x00004000>, |
| <0x00024000 0x00024000 0x00002000>, |
| <0x00026000 0x00026000 0x00001000>, |
| <0x00027000 0x00027000 0x00001000>, |
| <0x00028000 0x00028000 0x00001000>, |
| <0x00029000 0x00029000 0x00001000>, |
| <0x0002a000 0x0002a000 0x00002000>, |
| <0x0002c000 0x0002c000 0x00004000>, |
| <0x00030000 0x00030000 0x00010000>; |
| }; |
| }; |
| }; |
| |
| &l4_wkup { /* 0x4a300000 */ |
| compatible = "ti,omap4-l4-wkup", "simple-bus"; |
| reg = <0x4a300000 0x800>, |
| <0x4a300800 0x800>, |
| <0x4a301000 0x1000>; |
| reg-names = "ap", "la", "ia0"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x4a300000 0x010000>, /* segment 0 */ |
| <0x00010000 0x4a310000 0x010000>, /* segment 1 */ |
| <0x00020000 0x4a320000 0x010000>; /* segment 2 */ |
| |
| segment@0 { /* 0x4a300000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ |
| <0x00001000 0x00001000 0x001000>, /* ap 1 */ |
| <0x00000800 0x00000800 0x000800>, /* ap 2 */ |
| <0x00006000 0x00006000 0x002000>, /* ap 3 */ |
| <0x00008000 0x00008000 0x001000>, /* ap 4 */ |
| <0x0000a000 0x0000a000 0x001000>, /* ap 15 */ |
| <0x0000b000 0x0000b000 0x001000>, /* ap 16 */ |
| <0x00004000 0x00004000 0x001000>, /* ap 17 */ |
| <0x00005000 0x00005000 0x001000>, /* ap 18 */ |
| <0x0000c000 0x0000c000 0x001000>, /* ap 19 */ |
| <0x0000d000 0x0000d000 0x001000>; /* ap 20 */ |
| |
| target-module@4000 { /* 0x4a304000, ap 17 24.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| ti,hwmods = "counter_32k"; |
| reg = <0x4000 0x4>, |
| <0x4004 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4000 0x1000>; |
| |
| counter32k: counter@0 { |
| compatible = "ti,omap-counter32k"; |
| reg = <0x0 0x20>; |
| }; |
| }; |
| |
| target-module@6000 { /* 0x4a306000, ap 3 08.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x6000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6000 0x2000>; |
| |
| prm: prm@0 { |
| compatible = "ti,omap4-prm", "simple-bus"; |
| reg = <0x0 0x2000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x2000>; |
| |
| prm_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| prm_clockdomains: clockdomains { |
| }; |
| }; |
| }; |
| |
| target-module@a000 { /* 0x4a30a000, ap 15 34.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xa000 0x4>; |
| reg-names = "rev"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa000 0x1000>; |
| |
| scrm: scrm@0 { |
| compatible = "ti,omap4-scrm"; |
| reg = <0x0 0x2000>; |
| |
| scrm_clocks: clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| scrm_clockdomains: clockdomains { |
| }; |
| }; |
| }; |
| |
| target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "ctrl_module_wkup"; |
| reg = <0xc000 0x4>, |
| <0xc010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc000 0x1000>; |
| |
| omap4_scm_wkup: scm@c000 { |
| compatible = "ti,omap4-scm-wkup"; |
| reg = <0xc000 0x1000>; |
| }; |
| }; |
| }; |
| |
| segment@10000 { /* 0x4a310000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ |
| <0x00001000 0x00011000 0x001000>, /* ap 6 */ |
| <0x00004000 0x00014000 0x001000>, /* ap 7 */ |
| <0x00005000 0x00015000 0x001000>, /* ap 8 */ |
| <0x00008000 0x00018000 0x001000>, /* ap 9 */ |
| <0x00009000 0x00019000 0x001000>, /* ap 10 */ |
| <0x0000c000 0x0001c000 0x001000>, /* ap 11 */ |
| <0x0000d000 0x0001d000 0x001000>, /* ap 12 */ |
| <0x0000e000 0x0001e000 0x001000>, /* ap 21 */ |
| <0x0000f000 0x0001f000 0x001000>; /* ap 22 */ |
| |
| gpio1_target: target-module@0 { /* 0x4a310000, ap 5 14.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x0 0x4>, |
| <0x10 0x4>, |
| <0x114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>, |
| <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1000>; |
| |
| gpio1: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| ti,gpio-always-on; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@4000 { /* 0x4a314000, ap 7 18.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x4000 0x4>, |
| <0x4010 0x4>, |
| <0x4014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4000 0x1000>; |
| |
| wdt2: wdt@0 { |
| compatible = "ti,omap4-wdt", "ti,omap3-wdt"; |
| reg = <0x0 0x80>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@8000 { /* 0x4a318000, ap 9 1c.0 */ |
| compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| ti,hwmods = "timer1"; |
| reg = <0x8000 0x4>, |
| <0x8010 0x4>, |
| <0x8014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x8000 0x1000>; |
| |
| timer1: timer@0 { |
| compatible = "ti,omap3430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| ti,timer-alwon; |
| }; |
| }; |
| |
| target-module@c000 { /* 0x4a31c000, ap 11 20.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0xc000 0x4>, |
| <0xc010 0x4>, |
| <0xc014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc000 0x1000>; |
| |
| keypad: keypad@0 { |
| compatible = "ti,omap4-keypad"; |
| reg = <0x0 0x80>; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| reg-names = "mpu"; |
| }; |
| }; |
| |
| target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| ti,hwmods = "ctrl_module_pad_wkup"; |
| reg = <0xe000 0x4>, |
| <0xe010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe000 0x1000>; |
| |
| omap4_pmx_wkup: pinmux@40 { |
| compatible = "ti,omap4-padconf", |
| "pinctrl-single"; |
| reg = <0x40 0x0038>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <1>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| pinctrl-single,register-width = <16>; |
| pinctrl-single,function-mask = <0x7fff>; |
| }; |
| }; |
| }; |
| |
| segment@20000 { /* 0x4a320000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ |
| <0x0000a000 0x0002a000 0x001000>, /* ap 14 */ |
| <0x00000000 0x00020000 0x001000>, /* ap 23 */ |
| <0x00001000 0x00021000 0x001000>, /* ap 24 */ |
| <0x00002000 0x00022000 0x001000>, /* ap 25 */ |
| <0x00003000 0x00023000 0x001000>, /* ap 26 */ |
| <0x00004000 0x00024000 0x001000>, /* ap 27 */ |
| <0x00005000 0x00025000 0x001000>, /* ap 28 */ |
| <0x00007000 0x00027000 0x000400>, /* ap 29 */ |
| <0x00008000 0x00028000 0x000800>, /* ap 30 */ |
| <0x00009000 0x00029000 0x000400>; /* ap 31 */ |
| |
| target-module@0 { /* 0x4a320000, ap 23 04.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1000>; |
| }; |
| |
| target-module@2000 { /* 0x4a322000, ap 25 0c.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x2000 0x1000>; |
| }; |
| |
| target-module@4000 { /* 0x4a324000, ap 27 10.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x4000 0x1000>; |
| }; |
| |
| target-module@6000 { /* 0x4a326000, ap 13 28.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00006000 0x00001000>, |
| <0x00001000 0x00007000 0x00000400>, |
| <0x00002000 0x00008000 0x00000800>, |
| <0x00003000 0x00009000 0x00000400>; |
| }; |
| }; |
| }; |
| |
| &l4_per { /* 0x48000000 */ |
| compatible = "ti,omap4-l4-per", "simple-bus"; |
| reg = <0x48000000 0x800>, |
| <0x48000800 0x800>, |
| <0x48001000 0x400>, |
| <0x48001400 0x400>, |
| <0x48001800 0x400>, |
| <0x48001c00 0x400>; |
| reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */ |
| <0x00200000 0x48200000 0x200000>; /* segment 1 */ |
| |
| segment@0 { /* 0x48000000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ |
| <0x00001000 0x00001000 0x000400>, /* ap 1 */ |
| <0x00000800 0x00000800 0x000800>, /* ap 2 */ |
| <0x00020000 0x00020000 0x001000>, /* ap 3 */ |
| <0x00021000 0x00021000 0x001000>, /* ap 4 */ |
| <0x00032000 0x00032000 0x001000>, /* ap 5 */ |
| <0x00033000 0x00033000 0x001000>, /* ap 6 */ |
| <0x00034000 0x00034000 0x001000>, /* ap 7 */ |
| <0x00035000 0x00035000 0x001000>, /* ap 8 */ |
| <0x00036000 0x00036000 0x001000>, /* ap 9 */ |
| <0x00037000 0x00037000 0x001000>, /* ap 10 */ |
| <0x0003e000 0x0003e000 0x001000>, /* ap 11 */ |
| <0x0003f000 0x0003f000 0x001000>, /* ap 12 */ |
| <0x00040000 0x00040000 0x010000>, /* ap 13 */ |
| <0x00050000 0x00050000 0x001000>, /* ap 14 */ |
| <0x00055000 0x00055000 0x001000>, /* ap 15 */ |
| <0x00056000 0x00056000 0x001000>, /* ap 16 */ |
| <0x00057000 0x00057000 0x001000>, /* ap 17 */ |
| <0x00058000 0x00058000 0x001000>, /* ap 18 */ |
| <0x00059000 0x00059000 0x001000>, /* ap 19 */ |
| <0x0005a000 0x0005a000 0x001000>, /* ap 20 */ |
| <0x0005b000 0x0005b000 0x001000>, /* ap 21 */ |
| <0x0005c000 0x0005c000 0x001000>, /* ap 22 */ |
| <0x0005d000 0x0005d000 0x001000>, /* ap 23 */ |
| <0x0005e000 0x0005e000 0x001000>, /* ap 24 */ |
| <0x00060000 0x00060000 0x001000>, /* ap 25 */ |
| <0x0006a000 0x0006a000 0x001000>, /* ap 26 */ |
| <0x0006b000 0x0006b000 0x001000>, /* ap 27 */ |
| <0x0006c000 0x0006c000 0x001000>, /* ap 28 */ |
| <0x0006d000 0x0006d000 0x001000>, /* ap 29 */ |
| <0x0006e000 0x0006e000 0x001000>, /* ap 30 */ |
| <0x0006f000 0x0006f000 0x001000>, /* ap 31 */ |
| <0x00070000 0x00070000 0x001000>, /* ap 32 */ |
| <0x00071000 0x00071000 0x001000>, /* ap 33 */ |
| <0x00072000 0x00072000 0x001000>, /* ap 34 */ |
| <0x00073000 0x00073000 0x001000>, /* ap 35 */ |
| <0x00061000 0x00061000 0x001000>, /* ap 36 */ |
| <0x00096000 0x00096000 0x001000>, /* ap 37 */ |
| <0x00097000 0x00097000 0x001000>, /* ap 38 */ |
| <0x00076000 0x00076000 0x001000>, /* ap 39 */ |
| <0x00077000 0x00077000 0x001000>, /* ap 40 */ |
| <0x00078000 0x00078000 0x001000>, /* ap 41 */ |
| <0x00079000 0x00079000 0x001000>, /* ap 42 */ |
| <0x00086000 0x00086000 0x001000>, /* ap 43 */ |
| <0x00087000 0x00087000 0x001000>, /* ap 44 */ |
| <0x00088000 0x00088000 0x001000>, /* ap 45 */ |
| <0x00089000 0x00089000 0x001000>, /* ap 46 */ |
| <0x000b0000 0x000b0000 0x001000>, /* ap 47 */ |
| <0x000b1000 0x000b1000 0x001000>, /* ap 48 */ |
| <0x00098000 0x00098000 0x001000>, /* ap 49 */ |
| <0x00099000 0x00099000 0x001000>, /* ap 50 */ |
| <0x0009a000 0x0009a000 0x001000>, /* ap 51 */ |
| <0x0009b000 0x0009b000 0x001000>, /* ap 52 */ |
| <0x0009c000 0x0009c000 0x001000>, /* ap 53 */ |
| <0x0009d000 0x0009d000 0x001000>, /* ap 54 */ |
| <0x0009e000 0x0009e000 0x001000>, /* ap 55 */ |
| <0x0009f000 0x0009f000 0x001000>, /* ap 56 */ |
| <0x00090000 0x00090000 0x002000>, /* ap 57 */ |
| <0x00092000 0x00092000 0x001000>, /* ap 58 */ |
| <0x000a4000 0x000a4000 0x001000>, /* ap 59 */ |
| <0x000a6000 0x000a6000 0x001000>, /* ap 60 */ |
| <0x000a8000 0x000a8000 0x004000>, /* ap 61 */ |
| <0x000ac000 0x000ac000 0x001000>, /* ap 62 */ |
| <0x000ad000 0x000ad000 0x001000>, /* ap 63 */ |
| <0x000ae000 0x000ae000 0x001000>, /* ap 64 */ |
| <0x000b2000 0x000b2000 0x001000>, /* ap 65 */ |
| <0x000b3000 0x000b3000 0x001000>, /* ap 66 */ |
| <0x000b4000 0x000b4000 0x001000>, /* ap 67 */ |
| <0x000b5000 0x000b5000 0x001000>, /* ap 68 */ |
| <0x000b8000 0x000b8000 0x001000>, /* ap 69 */ |
| <0x000b9000 0x000b9000 0x001000>, /* ap 70 */ |
| <0x000ba000 0x000ba000 0x001000>, /* ap 71 */ |
| <0x000bb000 0x000bb000 0x001000>, /* ap 72 */ |
| <0x000d1000 0x000d1000 0x001000>, /* ap 73 */ |
| <0x000d2000 0x000d2000 0x001000>, /* ap 74 */ |
| <0x000d5000 0x000d5000 0x001000>, /* ap 75 */ |
| <0x000d6000 0x000d6000 0x001000>, /* ap 76 */ |
| <0x000a2000 0x000a2000 0x001000>, /* ap 79 */ |
| <0x000a3000 0x000a3000 0x001000>, /* ap 80 */ |
| <0x00001400 0x00001400 0x000400>, /* ap 81 */ |
| <0x00001800 0x00001800 0x000400>, /* ap 82 */ |
| <0x00001c00 0x00001c00 0x000400>, /* ap 83 */ |
| <0x000a5000 0x000a5000 0x001000>; /* ap 84 */ |
| |
| target-module@20000 { /* 0x48020000, ap 3 06.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x20050 0x4>, |
| <0x20054 0x4>, |
| <0x20058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x20000 0x1000>; |
| |
| uart3: serial@0 { |
| compatible = "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| target-module@32000 { /* 0x48032000, ap 5 02.0 */ |
| compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| reg = <0x32000 0x4>, |
| <0x32010 0x4>, |
| <0x32014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x32000 0x1000>; |
| |
| timer2: timer@0 { |
| compatible = "ti,omap3430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@34000 { /* 0x48034000, ap 7 04.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| reg = <0x34000 0x4>, |
| <0x34010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x34000 0x1000>; |
| |
| timer3: timer@0 { |
| compatible = "ti,omap4430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@36000 { /* 0x48036000, ap 9 0e.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| reg = <0x36000 0x4>, |
| <0x36010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x36000 0x1000>; |
| |
| timer4: timer@0 { |
| compatible = "ti,omap4430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@3e000 { /* 0x4803e000, ap 11 08.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| reg = <0x3e000 0x4>, |
| <0x3e010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x3e000 0x1000>; |
| |
| timer9: timer@0 { |
| compatible = "ti,omap4430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| ti,timer-pwm; |
| }; |
| }; |
| |
| /* Unused DSS L4 access, see L3 instead */ |
| target-module@40000 { /* 0x48040000, ap 13 0a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x40000 0x10000>; |
| }; |
| |
| target-module@55000 { /* 0x48055000, ap 15 0c.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x55000 0x4>, |
| <0x55010 0x4>, |
| <0x55114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>, |
| <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x55000 0x1000>; |
| |
| gpio2: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@57000 { /* 0x48057000, ap 17 16.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x57000 0x4>, |
| <0x57010 0x4>, |
| <0x57114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>, |
| <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x57000 0x1000>; |
| |
| gpio3: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@59000 { /* 0x48059000, ap 19 10.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x59000 0x4>, |
| <0x59010 0x4>, |
| <0x59114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>, |
| <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x59000 0x1000>; |
| |
| gpio4: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@5b000 { /* 0x4805b000, ap 21 12.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x5b000 0x4>, |
| <0x5b010 0x4>, |
| <0x5b114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>, |
| <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5b000 0x1000>; |
| |
| gpio5: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@5d000 { /* 0x4805d000, ap 23 14.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x5d000 0x4>, |
| <0x5d010 0x4>, |
| <0x5d114 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>, |
| <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>; |
| clock-names = "fck", "dbclk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x5d000 0x1000>; |
| |
| gpio6: gpio@0 { |
| compatible = "ti,omap4-gpio"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| target-module@60000 { /* 0x48060000, ap 25 1e.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x60000 0x8>, |
| <0x60010 0x8>, |
| <0x60090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x60000 0x1000>; |
| |
| i2c3: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x6a050 0x4>, |
| <0x6a054 0x4>, |
| <0x6a058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6a000 0x1000>; |
| |
| uart1: serial@0 { |
| compatible = "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x6c050 0x4>, |
| <0x6c054 0x4>, |
| <0x6c058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6c000 0x1000>; |
| |
| uart2: serial@0 { |
| compatible = "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x6e050 0x4>, |
| <0x6e054 0x4>, |
| <0x6e058 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x6e000 0x1000>; |
| |
| uart4: serial@0 { |
| compatible = "ti,omap4-uart"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| target-module@70000 { /* 0x48070000, ap 32 28.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x70000 0x8>, |
| <0x70010 0x8>, |
| <0x70090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x70000 0x1000>; |
| |
| i2c1: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| target-module@72000 { /* 0x48072000, ap 34 30.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x72000 0x8>, |
| <0x72010 0x8>, |
| <0x72090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x72000 0x1000>; |
| |
| i2c2: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| target-module@76000 { /* 0x48076000, ap 39 38.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x76000 0x4>, |
| <0x76010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x76000 0x1000>; |
| |
| /* No child device binding or driver in mainline */ |
| }; |
| |
| target-module@78000 { /* 0x48078000, ap 41 1a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x78000 0x4>, |
| <0x78010 0x4>, |
| <0x78014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x78000 0x1000>; |
| |
| elm: elm@0 { |
| compatible = "ti,am3352-elm"; |
| reg = <0x0 0x2000>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@86000 { /* 0x48086000, ap 43 24.0 */ |
| compatible = "ti,sysc-omap2-timer", "ti,sysc"; |
| reg = <0x86000 0x4>, |
| <0x86010 0x4>, |
| <0x86014 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_EMUFREE | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x86000 0x1000>; |
| |
| timer10: timer@0 { |
| compatible = "ti,omap3430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| ti,timer-pwm; |
| }; |
| }; |
| |
| target-module@88000 { /* 0x48088000, ap 45 2e.0 */ |
| compatible = "ti,sysc-omap4-timer", "ti,sysc"; |
| reg = <0x88000 0x4>, |
| <0x88010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x88000 0x1000>; |
| |
| timer11: timer@0 { |
| compatible = "ti,omap4430-timer"; |
| reg = <0x0 0x80>; |
| clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>; |
| clock-names = "fck"; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| ti,timer-pwm; |
| }; |
| }; |
| |
| rng_target: target-module@90000 { /* 0x48090000, ap 57 2a.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x91fe0 0x4>, |
| <0x91fe4 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>; |
| /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ |
| clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x90000 0x2000>; |
| |
| rng: rng@0 { |
| compatible = "ti,omap4-rng"; |
| reg = <0x0 0x2000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@96000 { /* 0x48096000, ap 37 26.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x9608c 0x4>; |
| reg-names = "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x96000 0x1000>; |
| |
| mcbsp4: mcbsp@0 { |
| compatible = "ti,omap4-mcbsp"; |
| reg = <0x0 0xff>; /* L4 Interconnect */ |
| reg-names = "mpu"; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "common"; |
| ti,buffer-size = <128>; |
| dmas = <&sdma 31>, |
| <&sdma 32>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| target-module@98000 { /* 0x48098000, ap 49 22.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x98000 0x4>, |
| <0x98010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x98000 0x1000>; |
| |
| mcspi1: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <4>; |
| dmas = <&sdma 35>, |
| <&sdma 36>, |
| <&sdma 37>, |
| <&sdma 38>, |
| <&sdma 39>, |
| <&sdma 40>, |
| <&sdma 41>, |
| <&sdma 42>; |
| dma-names = "tx0", "rx0", "tx1", "rx1", |
| "tx2", "rx2", "tx3", "rx3"; |
| }; |
| }; |
| |
| target-module@9a000 { /* 0x4809a000, ap 51 2c.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x9a000 0x4>, |
| <0x9a010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x9a000 0x1000>; |
| |
| mcspi2: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <2>; |
| dmas = <&sdma 43>, |
| <&sdma 44>, |
| <&sdma 45>, |
| <&sdma 46>; |
| dma-names = "tx0", "rx0", "tx1", "rx1"; |
| }; |
| }; |
| |
| target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0x9c000 0x4>, |
| <0x9c010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x9c000 0x1000>; |
| |
| mmc1: mmc@0 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| ti,dual-volt; |
| ti,needs-special-reset; |
| dmas = <&sdma 61>, <&sdma 62>; |
| dma-names = "tx", "rx"; |
| pbias-supply = <&pbias_mmc_reg>; |
| }; |
| }; |
| |
| target-module@9e000 { /* 0x4809e000, ap 55 48.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x9e000 0x1000>; |
| }; |
| |
| target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa2000 0x1000>; |
| }; |
| |
| target-module@a4000 { /* 0x480a4000, ap 59 34.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00000000 0x000a4000 0x00001000>, |
| <0x00001000 0x000a5000 0x00001000>; |
| }; |
| |
| des_target: target-module@a5000 { /* 0x480a5000 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0xa5030 0x4>, |
| <0xa5034 0x4>, |
| <0xa5038 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */ |
| clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xa5000 0x00001000>; |
| |
| des: des@0 { |
| compatible = "ti,omap4-des"; |
| reg = <0 0xa0>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&sdma 117>, <&sdma 116>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@a8000 { /* 0x480a8000, ap 61 3e.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xa8000 0x4000>; |
| }; |
| |
| target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xad000 0x4>, |
| <0xad010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xad000 0x1000>; |
| |
| mmc3: mmc@0 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| ti,needs-special-reset; |
| dmas = <&sdma 77>, <&sdma 78>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@b0000 { /* 0x480b0000, ap 47 40.0 */ |
| compatible = "ti,sysc"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb0000 0x1000>; |
| }; |
| |
| target-module@b2000 { /* 0x480b2000, ap 65 3c.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0xb2000 0x4>, |
| <0xb2014 0x4>, |
| <0xb2018 0x4>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,syss-mask = <1>; |
| ti,no-reset-on-init; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb2000 0x1000>; |
| |
| hdqw1w: 1w@0 { |
| compatible = "ti,omap3-1w"; |
| reg = <0x0 0x1000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xb4000 0x4>, |
| <0xb4010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */ |
| clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb4000 0x1000>; |
| |
| mmc2: mmc@0 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| ti,needs-special-reset; |
| dmas = <&sdma 47>, <&sdma 48>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@b8000 { /* 0x480b8000, ap 69 58.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xb8000 0x4>, |
| <0xb8010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xb8000 0x1000>; |
| |
| mcspi3: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <2>; |
| dmas = <&sdma 15>, <&sdma 16>; |
| dma-names = "tx0", "rx0"; |
| }; |
| }; |
| |
| target-module@ba000 { /* 0x480ba000, ap 71 32.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xba000 0x4>, |
| <0xba010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xba000 0x1000>; |
| |
| mcspi4: spi@0 { |
| compatible = "ti,omap4-mcspi"; |
| reg = <0x0 0x200>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ti,spi-num-cs = <1>; |
| dmas = <&sdma 70>, <&sdma 71>; |
| dma-names = "tx0", "rx0"; |
| }; |
| }; |
| |
| target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xd1000 0x4>, |
| <0xd1010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xd1000 0x1000>; |
| |
| mmc4: mmc@0 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| ti,needs-special-reset; |
| dmas = <&sdma 57>, <&sdma 58>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| |
| target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ |
| compatible = "ti,sysc-omap4", "ti,sysc"; |
| reg = <0xd5000 0x4>, |
| <0xd5010 0x4>; |
| reg-names = "rev", "sysc"; |
| ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | |
| SYSC_OMAP4_SOFTRESET)>; |
| ti,sysc-midle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xd5000 0x1000>; |
| |
| mmc5: mmc@0 { |
| compatible = "ti,omap4-hsmmc"; |
| reg = <0x0 0x400>; |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| ti,needs-special-reset; |
| dmas = <&sdma 59>, <&sdma 60>; |
| dma-names = "tx", "rx"; |
| }; |
| }; |
| }; |
| |
| segment@200000 { /* 0x48200000 */ |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ |
| <0x00151000 0x00351000 0x001000>; /* ap 78 */ |
| |
| target-module@150000 { /* 0x48350000, ap 77 4c.0 */ |
| compatible = "ti,sysc-omap2", "ti,sysc"; |
| reg = <0x150000 0x8>, |
| <0x150010 0x8>, |
| <0x150090 0x8>; |
| reg-names = "rev", "sysc", "syss"; |
| ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | |
| SYSC_OMAP2_ENAWAKEUP | |
| SYSC_OMAP2_SOFTRESET | |
| SYSC_OMAP2_AUTOIDLE)>; |
| ti,sysc-sidle = <SYSC_IDLE_FORCE>, |
| <SYSC_IDLE_NO>, |
| <SYSC_IDLE_SMART>, |
| <SYSC_IDLE_SMART_WKUP>; |
| ti,syss-mask = <1>; |
| /* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */ |
| clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>; |
| clock-names = "fck"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x150000 0x1000>; |
| |
| i2c4: i2c@0 { |
| compatible = "ti,omap4-i2c"; |
| reg = <0x0 0x100>; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| }; |
| }; |