| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| /* |
| * Copyright (C) 2021 BayLibre SAS. |
| * Author: Fabien Parent <fparent@baylibre.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include <config.h> |
| #include "mt8183.dtsi" |
| |
| / { |
| model = "MediaTek MT8183 pumpkin board"; |
| compatible = "mediatek,mt8183-pumpkin", "mediatek,mt8183"; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0 0x40000000 0 0x80000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ |
| bl31_secmon_reserved: secmon@54600000 { |
| no-map; |
| reg = <0 0x54600000 0x0 0x30000>; |
| }; |
| |
| /* 12 MiB reserved for OP-TEE (BL32) |
| * +-----------------------+ 0x43e0_0000 |
| * | SHMEM 2MiB | |
| * +-----------------------+ 0x43c0_0000 |
| * | | TA_RAM 8MiB | |
| * + TZDRAM +--------------+ 0x4340_0000 |
| * | | TEE_RAM 2MiB | |
| * +-----------------------+ 0x4320_0000 |
| */ |
| optee_reserved: optee@43200000 { |
| no-map; |
| reg = <0 0x43200000 0 0x00c00000>; |
| }; |
| }; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| reg_1p8v: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-1.8V"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| &watchdog { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| bus-width = <4>; |
| max-frequency = <200000000>; |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| cap-mmc-hw-reset; |
| vmmc-supply = <®_3p3v>; |
| vqmmc-supply = <®_1p8v>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
| |
| &ssusb { |
| mediatek,force-vbus; |
| maximum-speed = "high-speed"; |
| dr_mode = "peripheral"; |
| status = "okay"; |
| }; |