blob: 7859536a6725569da9ad439b8f4d49e3a5672194 [file] [log] [blame]
/*
* Freescale i.MX28 SPI driver
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* NOTE: This driver only supports the SPI-controller chipselects,
* GPIO driven chipselects are not supported.
*/
#include <common.h>
#include <malloc.h>
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#define MXS_SPI_MAX_TIMEOUT 1000000
#define MXS_SPI_PORT_OFFSET 0x2000
#define MXS_SSP_CHIPSELECT_MASK 0x00300000
#define MXS_SSP_CHIPSELECT_SHIFT 20
struct mxs_spi_slave {
struct spi_slave slave;
uint32_t max_khz;
uint32_t mode;
struct mx28_ssp_regs *regs;
};
static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
{
return container_of(slave, struct mxs_spi_slave, slave);
}
void spi_init(void)
{
}
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
/* MXS SPI: 4 ports and 3 chip selects maximum */
if (bus > 3 || cs > 2)
return 0;
else
return 1;
}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct mxs_spi_slave *mxs_slave;
uint32_t addr;
struct mx28_ssp_regs *ssp_regs;
int reg;
if (!spi_cs_is_valid(bus, cs)) {
printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
return NULL;
}
mxs_slave = malloc(sizeof(struct mxs_spi_slave));
if (!mxs_slave)
return NULL;
addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET);
mxs_slave->slave.bus = bus;
mxs_slave->slave.cs = cs;
mxs_slave->max_khz = max_hz / 1000;
mxs_slave->mode = mode;
mxs_slave->regs = (struct mx28_ssp_regs *)addr;
ssp_regs = mxs_slave->regs;
reg = readl(&ssp_regs->hw_ssp_ctrl0);
reg &= ~(MXS_SSP_CHIPSELECT_MASK);
reg |= cs << MXS_SSP_CHIPSELECT_SHIFT;
writel(reg, &ssp_regs->hw_ssp_ctrl0);
return &mxs_slave->slave;
}
void spi_free_slave(struct spi_slave *slave)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
free(mxs_slave);
}
int spi_claim_bus(struct spi_slave *slave)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
uint32_t reg = 0;
mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
writel(reg, &ssp_regs->hw_ssp_ctrl1);
writel(0, &ssp_regs->hw_ssp_cmd0);
mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
return 0;
}
void spi_release_bus(struct spi_slave *slave)
{
}
static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs)
{
writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
}
static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs)
{
writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
int len = bitlen / 8;
const char *tx = dout;
char *rx = din;
char dummy;
if (bitlen == 0) {
if (flags & SPI_XFER_END) {
rx = &dummy;
len = 1;
} else
return 0;
}
if (!rx && !tx)
return 0;
if (flags & SPI_XFER_BEGIN)
mxs_spi_start_xfer(ssp_regs);
while (len--) {
/* We transfer 1 byte */
writel(1, &ssp_regs->hw_ssp_xfer_size);
if ((flags & SPI_XFER_END) && !len)
mxs_spi_end_xfer(ssp_regs);
if (tx)
writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
else
writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for start\n");
return -ETIMEDOUT;
}
if (tx)
writel(*tx++, &ssp_regs->hw_ssp_data);
writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
if (rx) {
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for data\n");
return -ETIMEDOUT;
}
*rx = readl(&ssp_regs->hw_ssp_data);
rx++;
}
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for finish\n");
return -ETIMEDOUT;
}
}
return 0;
}