| /* # 1 "libgcc1.S" */ |
| @ libgcc1 routines for ARM cpu. |
| @ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) |
| dividend .req r0 |
| divisor .req r1 |
| result .req r2 |
| curbit .req r3 |
| ip .req r12 |
| sp .req r13 |
| lr .req r14 |
| pc .req r15 |
| .text |
| .globl __udivsi3 |
| .type __udivsi3 ,function |
| .align 0 |
| __udivsi3 : |
| cmp divisor, #0 |
| beq Ldiv0 |
| mov curbit, #1 |
| mov result, #0 |
| cmp dividend, divisor |
| bcc Lgot_result |
| Loop1: |
| @ Unless the divisor is very big, shift it up in multiples of |
| @ four bits, since this is the amount of unwinding in the main |
| @ division loop. Continue shifting until the divisor is |
| @ larger than the dividend. |
| cmp divisor, #0x10000000 |
| cmpcc divisor, dividend |
| movcc divisor, divisor, lsl #4 |
| movcc curbit, curbit, lsl #4 |
| bcc Loop1 |
| Lbignum: |
| @ For very big divisors, we must shift it a bit at a time, or |
| @ we will be in danger of overflowing. |
| cmp divisor, #0x80000000 |
| cmpcc divisor, dividend |
| movcc divisor, divisor, lsl #1 |
| movcc curbit, curbit, lsl #1 |
| bcc Lbignum |
| Loop3: |
| @ Test for possible subtractions, and note which bits |
| @ are done in the result. On the final pass, this may subtract |
| @ too much from the dividend, but the result will be ok, since the |
| @ "bit" will have been shifted out at the bottom. |
| cmp dividend, divisor |
| subcs dividend, dividend, divisor |
| orrcs result, result, curbit |
| cmp dividend, divisor, lsr #1 |
| subcs dividend, dividend, divisor, lsr #1 |
| orrcs result, result, curbit, lsr #1 |
| cmp dividend, divisor, lsr #2 |
| subcs dividend, dividend, divisor, lsr #2 |
| orrcs result, result, curbit, lsr #2 |
| cmp dividend, divisor, lsr #3 |
| subcs dividend, dividend, divisor, lsr #3 |
| orrcs result, result, curbit, lsr #3 |
| cmp dividend, #0 @ Early termination? |
| movnes curbit, curbit, lsr #4 @ No, any more bits to do? |
| movne divisor, divisor, lsr #4 |
| bne Loop3 |
| Lgot_result: |
| mov r0, result |
| mov pc, lr |
| Ldiv0: |
| str lr, [sp, #-4]! |
| bl __div0 (PLT) |
| mov r0, #0 @ about as wrong as it could be |
| ldmia sp!, {pc} |
| .size __udivsi3 , . - __udivsi3 |
| /* # 235 "libgcc1.S" */ |
| /* # 320 "libgcc1.S" */ |
| /* # 421 "libgcc1.S" */ |
| /* # 433 "libgcc1.S" */ |
| /* # 456 "libgcc1.S" */ |
| /* # 500 "libgcc1.S" */ |
| /* # 580 "libgcc1.S" */ |