drivers/usb/musb-new/musb_regs.h - platform/external/u-boot - Gitiles

 /*
  * MUSB OTG driver register defines
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
  *
  * SPDX-License-Identifier:	GPL-2.0
  */

 #ifndef __MUSB_REGS_H__
 #define __MUSB_REGS_H__

 #define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */

 /*
  * MUSB Register bits
  */

 /* POWER */
 #define MUSB_POWER_ISOUPDATE	0x80
 #define MUSB_POWER_SOFTCONN	0x40
 #define MUSB_POWER_HSENAB	0x20
 #define MUSB_POWER_HSMODE	0x10
 #define MUSB_POWER_RESET	0x08
 #define MUSB_POWER_RESUME	0x04
 #define MUSB_POWER_SUSPENDM	0x02
 #define MUSB_POWER_ENSUSPEND	0x01

 /* INTRUSB */
 #define MUSB_INTR_SUSPEND	0x01
 #define MUSB_INTR_RESUME	0x02
 #define MUSB_INTR_RESET		0x04
 #define MUSB_INTR_BABBLE	0x04
 #define MUSB_INTR_SOF		0x08
 #define MUSB_INTR_CONNECT	0x10
 #define MUSB_INTR_DISCONNECT	0x20
 #define MUSB_INTR_SESSREQ	0x40
 #define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */

 /* DEVCTL */
 #define MUSB_DEVCTL_BDEVICE	0x80
 #define MUSB_DEVCTL_FSDEV	0x40
 #define MUSB_DEVCTL_LSDEV	0x20
 #define MUSB_DEVCTL_VBUS	0x18
 #define MUSB_DEVCTL_VBUS_SHIFT	3
 #define MUSB_DEVCTL_HM		0x04
 #define MUSB_DEVCTL_HR		0x02
 #define MUSB_DEVCTL_SESSION	0x01

 /* MUSB ULPI VBUSCONTROL */
 #define MUSB_ULPI_USE_EXTVBUS	0x01
 #define MUSB_ULPI_USE_EXTVBUSIND 0x02
 /* ULPI_REG_CONTROL */
 #define MUSB_ULPI_REG_REQ	(1 << 0)
 #define MUSB_ULPI_REG_CMPLT	(1 << 1)
 #define MUSB_ULPI_RDN_WR	(1 << 2)

 /* TESTMODE */
 #define MUSB_TEST_FORCE_HOST	0x80
 #define MUSB_TEST_FIFO_ACCESS	0x40
 #define MUSB_TEST_FORCE_FS	0x20
 #define MUSB_TEST_FORCE_HS	0x10
 #define MUSB_TEST_PACKET	0x08
 #define MUSB_TEST_K		0x04
 #define MUSB_TEST_J		0x02
 #define MUSB_TEST_SE0_NAK	0x01

 /* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
 #define MUSB_FIFOSZ_DPB	0x10
 /* Allocation size (8, 16, 32, ... 4096) */
 #define MUSB_FIFOSZ_SIZE	0x0f

 /* CSR0 */
 #define MUSB_CSR0_FLUSHFIFO	0x0100
 #define MUSB_CSR0_TXPKTRDY	0x0002
 #define MUSB_CSR0_RXPKTRDY	0x0001

 /* CSR0 in Peripheral mode */
 #define MUSB_CSR0_P_SVDSETUPEND	0x0080
 #define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
 #define MUSB_CSR0_P_SENDSTALL	0x0020
 #define MUSB_CSR0_P_SETUPEND	0x0010
 #define MUSB_CSR0_P_DATAEND	0x0008
 #define MUSB_CSR0_P_SENTSTALL	0x0004

 /* CSR0 in Host mode */
 #define MUSB_CSR0_H_DIS_PING		0x0800
 #define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
 #define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
 #define MUSB_CSR0_H_NAKTIMEOUT		0x0080
 #define MUSB_CSR0_H_STATUSPKT		0x0040
 #define MUSB_CSR0_H_REQPKT		0x0020
 #define MUSB_CSR0_H_ERROR		0x0010
 #define MUSB_CSR0_H_SETUPPKT		0x0008
 #define MUSB_CSR0_H_RXSTALL		0x0004

 /* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
 #define MUSB_CSR0_P_WZC_BITS	\
 	(MUSB_CSR0_P_SENTSTALL)
 #define MUSB_CSR0_H_WZC_BITS	\
 	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
 	| MUSB_CSR0_RXPKTRDY)

 /* TxType/RxType */
 #define MUSB_TYPE_SPEED		0xc0
 #define MUSB_TYPE_SPEED_SHIFT	6
 #define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
 #define MUSB_TYPE_PROTO_SHIFT	4
 #define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */

 /* CONFIGDATA */
 #define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
 #define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
 #define MUSB_CONFIGDATA_BIGENDIAN	0x20
 #define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
 #define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
 #define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
 #define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
 #define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */

 /* TXCSR in Peripheral and Host mode */
 #define MUSB_TXCSR_AUTOSET		0x8000
 #define MUSB_TXCSR_DMAENAB		0x1000
 #define MUSB_TXCSR_FRCDATATOG		0x0800
 #define MUSB_TXCSR_DMAMODE		0x0400
 #define MUSB_TXCSR_CLRDATATOG		0x0040
 #define MUSB_TXCSR_FLUSHFIFO		0x0008
 #define MUSB_TXCSR_FIFONOTEMPTY		0x0002
 #define MUSB_TXCSR_TXPKTRDY		0x0001

 /* TXCSR in Peripheral mode */
 #define MUSB_TXCSR_P_ISO		0x4000
 #define MUSB_TXCSR_P_INCOMPTX		0x0080
 #define MUSB_TXCSR_P_SENTSTALL		0x0020
 #define MUSB_TXCSR_P_SENDSTALL		0x0010
 #define MUSB_TXCSR_P_UNDERRUN		0x0004

 /* TXCSR in Host mode */
 #define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
 #define MUSB_TXCSR_H_DATATOGGLE		0x0100
 #define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
 #define MUSB_TXCSR_H_RXSTALL		0x0020
 #define MUSB_TXCSR_H_ERROR		0x0004

 /* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
 #define MUSB_TXCSR_P_WZC_BITS	\
 	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
 	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
 #define MUSB_TXCSR_H_WZC_BITS	\
 	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
 	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)

 /* RXCSR in Peripheral and Host mode */
 #define MUSB_RXCSR_AUTOCLEAR		0x8000
 #define MUSB_RXCSR_DMAENAB		0x2000
 #define MUSB_RXCSR_DISNYET		0x1000
 #define MUSB_RXCSR_PID_ERR		0x1000
 #define MUSB_RXCSR_DMAMODE		0x0800
 #define MUSB_RXCSR_INCOMPRX		0x0100
 #define MUSB_RXCSR_CLRDATATOG		0x0080
 #define MUSB_RXCSR_FLUSHFIFO		0x0010
 #define MUSB_RXCSR_DATAERROR		0x0008
 #define MUSB_RXCSR_FIFOFULL		0x0002
 #define MUSB_RXCSR_RXPKTRDY		0x0001

 /* RXCSR in Peripheral mode */
 #define MUSB_RXCSR_P_ISO		0x4000
 #define MUSB_RXCSR_P_SENTSTALL		0x0040
 #define MUSB_RXCSR_P_SENDSTALL		0x0020
 #define MUSB_RXCSR_P_OVERRUN		0x0004

 /* RXCSR in Host mode */
 #define MUSB_RXCSR_H_AUTOREQ		0x4000
 #define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
 #define MUSB_RXCSR_H_DATATOGGLE		0x0200
 #define MUSB_RXCSR_H_RXSTALL		0x0040
 #define MUSB_RXCSR_H_REQPKT		0x0020
 #define MUSB_RXCSR_H_ERROR		0x0004

 /* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
 #define MUSB_RXCSR_P_WZC_BITS	\
 	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
 	| MUSB_RXCSR_RXPKTRDY)
 #define MUSB_RXCSR_H_WZC_BITS	\
 	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
 	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)

 /* HUBADDR */
 #define MUSB_HUBADDR_MULTI_TT		0x80


 #ifndef CONFIG_BLACKFIN

 /* SUNXI has different reg addresses, but identical r/w functions */
 #ifndef CONFIG_ARCH_SUNXI

 /*
  * Common USB registers
  */

 #define MUSB_FADDR		0x00	/* 8-bit */
 #define MUSB_POWER		0x01	/* 8-bit */

 #define MUSB_INTRTX		0x02	/* 16-bit */
 #define MUSB_INTRRX		0x04
 #define MUSB_INTRTXE		0x06
 #define MUSB_INTRRXE		0x08
 #define MUSB_INTRUSB		0x0A	/* 8 bit */
 #define MUSB_INTRUSBE		0x0B	/* 8 bit */
 #define MUSB_FRAME		0x0C
 #define MUSB_INDEX		0x0E	/* 8 bit */
 #define MUSB_TESTMODE		0x0F	/* 8 bit */

 /* Get offset for a given FIFO from musb->mregs */
 #if defined(CONFIG_USB_MUSB_TUSB6010) ||	\
 	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
 #define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
 #else
 #define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
 #endif

 /*
  * Additional Control Registers
  */

 #define MUSB_DEVCTL		0x60	/* 8 bit */

 /* These are always controlled through the INDEX register */
 #define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
 #define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
 #define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
 #define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */

 /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
 #define MUSB_HWVERS		0x6C	/* 8 bit */
 #define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
 #define MUSB_ULPI_INT_MASK	0x72	/* 8 bit */
 #define MUSB_ULPI_INT_SRC	0x73	/* 8 bit */
 #define MUSB_ULPI_REG_DATA	0x74	/* 8 bit */
 #define MUSB_ULPI_REG_ADDR	0x75	/* 8 bit */
 #define MUSB_ULPI_REG_CONTROL	0x76	/* 8 bit */
 #define MUSB_ULPI_RAW_DATA	0x77	/* 8 bit */

 #define MUSB_EPINFO		0x78	/* 8 bit */
 #define MUSB_RAMINFO		0x79	/* 8 bit */
 #define MUSB_LINKINFO		0x7a	/* 8 bit */
 #define MUSB_VPLEN		0x7b	/* 8 bit */
 #define MUSB_HS_EOF1		0x7c	/* 8 bit */
 #define MUSB_FS_EOF1		0x7d	/* 8 bit */
 #define MUSB_LS_EOF1		0x7e	/* 8 bit */

 /* Offsets to endpoint registers */
 #define MUSB_TXMAXP		0x00
 #define MUSB_TXCSR		0x02
 #define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
 #define MUSB_RXMAXP		0x04
 #define MUSB_RXCSR		0x06
 #define MUSB_RXCOUNT		0x08
 #define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
 #define MUSB_TXTYPE		0x0A
 #define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
 #define MUSB_TXINTERVAL		0x0B
 #define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
 #define MUSB_RXTYPE		0x0C
 #define MUSB_RXINTERVAL		0x0D
 #define MUSB_FIFOSIZE		0x0F
 #define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */

 /* Offsets to endpoint registers in indexed model (using INDEX register) */
 #define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
 	(0x10 + (_offset))

 /* Offsets to endpoint registers in flat models */
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(0x100 + (0x10*(_epnum)) + (_offset))

 #if defined(CONFIG_USB_MUSB_TUSB6010) ||	\
 	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
 /* TUSB6010 EP0 configuration register is special */
 #define MUSB_TUSB_OFFSET(_epnum, _offset)	\
 	(0x10 + _offset)
 #include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
 #endif

 #define MUSB_TXCSR_MODE			0x2000

 /* "bus control"/target registers, for host side multipoint (external hubs) */
 #define MUSB_TXFUNCADDR		0x00
 #define MUSB_TXHUBADDR		0x02
 #define MUSB_TXHUBPORT		0x03

 #define MUSB_RXFUNCADDR		0x04
 #define MUSB_RXHUBADDR		0x06
 #define MUSB_RXHUBPORT		0x07

 #define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
 	(0x80 + (8*(_epnum)) + (_offset))

 #else /* CONFIG_ARCH_SUNXI */

 /*
  * Common USB registers
  */

 #define MUSB_FADDR		0x0098
 #define MUSB_POWER		0x0040

 #define MUSB_INTRTX		0x0044
 #define MUSB_INTRRX		0x0046
 #define MUSB_INTRTXE		0x0048
 #define MUSB_INTRRXE		0x004A
 #define MUSB_INTRUSB		0x004C
 #define MUSB_INTRUSBE		0x0050
 #define MUSB_FRAME		0x0054
 #define MUSB_INDEX		0x0042
 #define MUSB_TESTMODE		0x007C

 /* Get offset for a given FIFO from musb->mregs */
 #define MUSB_FIFO_OFFSET(epnum)	(0x00 + ((epnum) * 4))

 /*
  * Additional Control Registers
  */

 #define MUSB_DEVCTL		0x0041

 /* These are always controlled through the INDEX register */
 #define MUSB_TXFIFOSZ		0x0090
 #define MUSB_RXFIFOSZ		0x0094
 #define MUSB_TXFIFOADD		0x0092
 #define MUSB_RXFIFOADD		0x0096

 #define MUSB_EPINFO		0x0078
 #define MUSB_RAMINFO		0x0079
 #define MUSB_LINKINFO		0x007A
 #define MUSB_VPLEN		0x007B
 #define MUSB_HS_EOF1		0x007C
 #define MUSB_FS_EOF1		0x007D
 #define MUSB_LS_EOF1		0x007E

 /* Offsets to endpoint registers */
 #define MUSB_TXMAXP		0x0080
 #define MUSB_TXCSR		0x0082
 #define MUSB_CSR0		0x0082
 #define MUSB_RXMAXP		0x0084
 #define MUSB_RXCSR		0x0086
 #define MUSB_RXCOUNT		0x0088
 #define MUSB_COUNT0		0x0088
 #define MUSB_TXTYPE		0x008C
 #define MUSB_TYPE0		0x008C
 #define MUSB_TXINTERVAL		0x008D
 #define MUSB_NAKLIMIT0		0x008D
 #define MUSB_RXTYPE		0x008E
 #define MUSB_RXINTERVAL		0x008F

 #define MUSB_CONFIGDATA		0x00b0 /* musb_read_configdata adds 0x10 ! */
 #define MUSB_FIFOSIZE		0x0090

 /* Offsets to endpoint registers in indexed model (using INDEX register) */
 #define MUSB_INDEXED_OFFSET(_epnum, _offset) (_offset)

 #define MUSB_TXCSR_MODE		0x2000

 /* "bus control"/target registers, for host side multipoint (external hubs) */
 #define MUSB_TXFUNCADDR		0x0098
 #define MUSB_TXHUBADDR		0x009A
 #define MUSB_TXHUBPORT		0x009B

 #define MUSB_RXFUNCADDR		0x009C
 #define MUSB_RXHUBADDR		0x009E
 #define MUSB_RXHUBPORT		0x009F

 /* Endpoint is selected with MUSB_INDEX. */
 #define MUSB_BUSCTL_OFFSET(_epnum, _offset) (_offset)

 #endif /* CONFIG_ARCH_SUNXI */

 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
 {
 	musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
 }

 static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
 {
 	musb_writew(mbase, MUSB_TXFIFOADD, c_off);
 }

 static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
 {
 	musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
 }

 static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 {
 	musb_writew(mbase, MUSB_RXFIFOADD, c_off);
 }

 static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
 {
 #ifndef CONFIG_ARCH_SUNXI /* No ulpi on sunxi */
 	musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
 #endif
 }

 static inline u8 musb_read_txfifosz(void __iomem *mbase)
 {
 	return musb_readb(mbase, MUSB_TXFIFOSZ);
 }

 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
 {
 	return musb_readw(mbase, MUSB_TXFIFOADD);
 }

 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
 {
 	return musb_readb(mbase, MUSB_RXFIFOSZ);
 }

 static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
 {
 	return musb_readw(mbase, MUSB_RXFIFOADD);
 }

 static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
 {
 #ifdef CONFIG_ARCH_SUNXI /* No ulpi on sunxi */
 	return 0;
 #else
 	return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
 #endif
 }

 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
 #ifdef CONFIG_MACH_SUN8I_A33
 	/* <Sigh> allwinner saves a reg, and we need to hardcode this */
 	return 0xde;
 #else
 	musb_writeb(mbase, MUSB_INDEX, 0);
 	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
 #endif
 }

 static inline u16 musb_read_hwvers(void __iomem *mbase)
 {
 #ifdef CONFIG_ARCH_SUNXI
 	return 0; /* Unknown version */
 #else
 	return musb_readw(mbase, MUSB_HWVERS);
 #endif
 }

 static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
 {
 	return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
 }

 static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
 		u8 qh_addr_reg)
 {
 	musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
 }

 static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
 		u8 qh_h_addr_reg)
 {
 	musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
 }

 static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
 		u8 qh_h_port_reg)
 {
 	musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
 }

 static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
 		u8 qh_addr_reg)
 {
 	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
 			qh_addr_reg);
 }

 static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
 		u8 qh_addr_reg)
 {
 	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
 			qh_addr_reg);
 }

 static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 		u8 qh_h_port_reg)
 {
 	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
 			qh_h_port_reg);
 }

 static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
 {
 	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
 }

 static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
 {
 	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
 }

 static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
 {
 	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
 }

 static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
 {
 	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
 }

 static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
 {
 	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
 }

 static inline u8  musb_read_txhubport(void __iomem *mbase, u8 epnum)
 {
 	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
 }

 #else /* CONFIG_BLACKFIN */

 #define USB_BASE		USB_FADDR
 #define USB_OFFSET(reg)		(reg - USB_BASE)

 /*
  * Common USB registers
  */
 #define MUSB_FADDR		USB_OFFSET(USB_FADDR)	/* 8-bit */
 #define MUSB_POWER		USB_OFFSET(USB_POWER)	/* 8-bit */
 #define MUSB_INTRTX		USB_OFFSET(USB_INTRTX)	/* 16-bit */
 #define MUSB_INTRRX		USB_OFFSET(USB_INTRRX)
 #define MUSB_INTRTXE		USB_OFFSET(USB_INTRTXE)
 #define MUSB_INTRRXE		USB_OFFSET(USB_INTRRXE)
 #define MUSB_INTRUSB		USB_OFFSET(USB_INTRUSB)	/* 8 bit */
 #define MUSB_INTRUSBE		USB_OFFSET(USB_INTRUSBE)/* 8 bit */
 #define MUSB_FRAME		USB_OFFSET(USB_FRAME)
 #define MUSB_INDEX		USB_OFFSET(USB_INDEX)	/* 8 bit */
 #define MUSB_TESTMODE		USB_OFFSET(USB_TESTMODE)/* 8 bit */

 /* Get offset for a given FIFO from musb->mregs */
 #define MUSB_FIFO_OFFSET(epnum)	\
 	(USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))

 /*
  * Additional Control Registers
  */

 #define MUSB_DEVCTL		USB_OFFSET(USB_OTG_DEV_CTL)	/* 8 bit */

 #define MUSB_LINKINFO		USB_OFFSET(USB_LINKINFO)/* 8 bit */
 #define MUSB_VPLEN		USB_OFFSET(USB_VPLEN)	/* 8 bit */
 #define MUSB_HS_EOF1		USB_OFFSET(USB_HS_EOF1)	/* 8 bit */
 #define MUSB_FS_EOF1		USB_OFFSET(USB_FS_EOF1)	/* 8 bit */
 #define MUSB_LS_EOF1		USB_OFFSET(USB_LS_EOF1)	/* 8 bit */

 /* Offsets to endpoint registers */
 #define MUSB_TXMAXP		0x00
 #define MUSB_TXCSR		0x04
 #define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
 #define MUSB_RXMAXP		0x08
 #define MUSB_RXCSR		0x0C
 #define MUSB_RXCOUNT		0x10
 #define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
 #define MUSB_TXTYPE		0x14
 #define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
 #define MUSB_TXINTERVAL		0x18
 #define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
 #define MUSB_RXTYPE		0x1C
 #define MUSB_RXINTERVAL		0x20
 #define MUSB_TXCOUNT		0x28

 /* Offsets to endpoint registers in indexed model (using INDEX register) */
 #define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
 	(0x40 + (_offset))

 /* Offsets to endpoint registers in flat models */
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))

 /* Not implemented - HW has separate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE			0x0000

 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
 {
 }

 static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
 {
 }

 static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
 {
 }

 static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 {
 }

 static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
 {
 }

 static inline u8 musb_read_txfifosz(void __iomem *mbase)
 {
 	return 0;
 }

 static inline u16 musb_read_txfifoadd(void __iomem *mbase)
 {
 	return 0;
 }

 static inline u8 musb_read_rxfifosz(void __iomem *mbase)
 {
 	return 0;
 }

 static inline u16  musb_read_rxfifoadd(void __iomem *mbase)
 {
 	return 0;
 }

 static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
 {
 	return 0;
 }

 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
 	return 0;
 }

 static inline u16 musb_read_hwvers(void __iomem *mbase)
 {
 	/*
 	 * This register is invisible on Blackfin, actually the MUSB
 	 * RTL version of Blackfin is 1.9, so just harcode its value.
 	 */
 	return MUSB_HWVERS_1900;
 }

 static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
 {
 	return NULL;
 }

 static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
 		u8 qh_addr_req)
 {
 }

 static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
 		u8 qh_h_addr_reg)
 {
 }

 static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
 		u8 qh_h_port_reg)
 {
 }

 static inline void  musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
 		u8 qh_addr_reg)
 {
 }

 static inline void  musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
 		u8 qh_addr_reg)
 {
 }

 static inline void  musb_write_txhubport(void __iomem *mbase, u8 epnum,
 		u8 qh_h_port_reg)
 {
 }

 static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
 {
 	return 0;
 }

 static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
 {
 	return 0;
 }

 static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
 {
 	return 0;
 }

 static inline u8  musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
 {
 	return 0;
 }

 static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
 {
 	return 0;
 }

 static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
 {
 	return 0;
 }

 #endif /* CONFIG_BLACKFIN */

 #endif	/* __MUSB_REGS_H__ */
	/*
	* MUSB OTG driver register defines
	*
	* Copyright 2005 Mentor Graphics Corporation
	* Copyright (C) 2005-2006 by Texas Instruments
	* Copyright (C) 2006-2007 Nokia Corporation
	*
	* SPDX-License-Identifier: GPL-2.0
	*/

	#ifndef __MUSB_REGS_H__
	#define __MUSB_REGS_H__

	#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */

	/*
	* MUSB Register bits
	*/

	/* POWER */
	#define MUSB_POWER_ISOUPDATE 0x80
	#define MUSB_POWER_SOFTCONN 0x40
	#define MUSB_POWER_HSENAB 0x20
	#define MUSB_POWER_HSMODE 0x10
	#define MUSB_POWER_RESET 0x08
	#define MUSB_POWER_RESUME 0x04
	#define MUSB_POWER_SUSPENDM 0x02
	#define MUSB_POWER_ENSUSPEND 0x01

	/* INTRUSB */
	#define MUSB_INTR_SUSPEND 0x01
	#define MUSB_INTR_RESUME 0x02
	#define MUSB_INTR_RESET 0x04
	#define MUSB_INTR_BABBLE 0x04
	#define MUSB_INTR_SOF 0x08
	#define MUSB_INTR_CONNECT 0x10
	#define MUSB_INTR_DISCONNECT 0x20
	#define MUSB_INTR_SESSREQ 0x40
	#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */

	/* DEVCTL */
	#define MUSB_DEVCTL_BDEVICE 0x80
	#define MUSB_DEVCTL_FSDEV 0x40
	#define MUSB_DEVCTL_LSDEV 0x20
	#define MUSB_DEVCTL_VBUS 0x18
	#define MUSB_DEVCTL_VBUS_SHIFT 3
	#define MUSB_DEVCTL_HM 0x04
	#define MUSB_DEVCTL_HR 0x02
	#define MUSB_DEVCTL_SESSION 0x01

	/* MUSB ULPI VBUSCONTROL */
	#define MUSB_ULPI_USE_EXTVBUS 0x01
	#define MUSB_ULPI_USE_EXTVBUSIND 0x02
	/* ULPI_REG_CONTROL */
	#define MUSB_ULPI_REG_REQ (1 << 0)
	#define MUSB_ULPI_REG_CMPLT (1 << 1)
	#define MUSB_ULPI_RDN_WR (1 << 2)

	/* TESTMODE */
	#define MUSB_TEST_FORCE_HOST 0x80
	#define MUSB_TEST_FIFO_ACCESS 0x40
	#define MUSB_TEST_FORCE_FS 0x20
	#define MUSB_TEST_FORCE_HS 0x10
	#define MUSB_TEST_PACKET 0x08
	#define MUSB_TEST_K 0x04
	#define MUSB_TEST_J 0x02
	#define MUSB_TEST_SE0_NAK 0x01

	/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
	#define MUSB_FIFOSZ_DPB 0x10
	/* Allocation size (8, 16, 32, ... 4096) */
	#define MUSB_FIFOSZ_SIZE 0x0f

	/* CSR0 */
	#define MUSB_CSR0_FLUSHFIFO 0x0100
	#define MUSB_CSR0_TXPKTRDY 0x0002
	#define MUSB_CSR0_RXPKTRDY 0x0001

	/* CSR0 in Peripheral mode */
	#define MUSB_CSR0_P_SVDSETUPEND 0x0080
	#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
	#define MUSB_CSR0_P_SENDSTALL 0x0020
	#define MUSB_CSR0_P_SETUPEND 0x0010
	#define MUSB_CSR0_P_DATAEND 0x0008
	#define MUSB_CSR0_P_SENTSTALL 0x0004

	/* CSR0 in Host mode */
	#define MUSB_CSR0_H_DIS_PING 0x0800
	#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
	#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
	#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
	#define MUSB_CSR0_H_STATUSPKT 0x0040
	#define MUSB_CSR0_H_REQPKT 0x0020
	#define MUSB_CSR0_H_ERROR 0x0010
	#define MUSB_CSR0_H_SETUPPKT 0x0008
	#define MUSB_CSR0_H_RXSTALL 0x0004

	/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
	#define MUSB_CSR0_P_WZC_BITS \
	(MUSB_CSR0_P_SENTSTALL)
	#define MUSB_CSR0_H_WZC_BITS \
	(MUSB_CSR0_H_NAKTIMEOUT \| MUSB_CSR0_H_RXSTALL \
	\| MUSB_CSR0_RXPKTRDY)

	/* TxType/RxType */
	#define MUSB_TYPE_SPEED 0xc0
	#define MUSB_TYPE_SPEED_SHIFT 6
	#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
	#define MUSB_TYPE_PROTO_SHIFT 4
	#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */

	/* CONFIGDATA */
	#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
	#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
	#define MUSB_CONFIGDATA_BIGENDIAN 0x20
	#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
	#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
	#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
	#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
	#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */

	/* TXCSR in Peripheral and Host mode */
	#define MUSB_TXCSR_AUTOSET 0x8000
	#define MUSB_TXCSR_DMAENAB 0x1000
	#define MUSB_TXCSR_FRCDATATOG 0x0800
	#define MUSB_TXCSR_DMAMODE 0x0400
	#define MUSB_TXCSR_CLRDATATOG 0x0040
	#define MUSB_TXCSR_FLUSHFIFO 0x0008
	#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
	#define MUSB_TXCSR_TXPKTRDY 0x0001

	/* TXCSR in Peripheral mode */
	#define MUSB_TXCSR_P_ISO 0x4000
	#define MUSB_TXCSR_P_INCOMPTX 0x0080
	#define MUSB_TXCSR_P_SENTSTALL 0x0020
	#define MUSB_TXCSR_P_SENDSTALL 0x0010
	#define MUSB_TXCSR_P_UNDERRUN 0x0004

	/* TXCSR in Host mode */
	#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
	#define MUSB_TXCSR_H_DATATOGGLE 0x0100
	#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
	#define MUSB_TXCSR_H_RXSTALL 0x0020
	#define MUSB_TXCSR_H_ERROR 0x0004

	/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
	#define MUSB_TXCSR_P_WZC_BITS \
	(MUSB_TXCSR_P_INCOMPTX \| MUSB_TXCSR_P_SENTSTALL \
	\| MUSB_TXCSR_P_UNDERRUN \| MUSB_TXCSR_FIFONOTEMPTY)
	#define MUSB_TXCSR_H_WZC_BITS \
	(MUSB_TXCSR_H_NAKTIMEOUT \| MUSB_TXCSR_H_RXSTALL \
	\| MUSB_TXCSR_H_ERROR \| MUSB_TXCSR_FIFONOTEMPTY)

	/* RXCSR in Peripheral and Host mode */
	#define MUSB_RXCSR_AUTOCLEAR 0x8000
	#define MUSB_RXCSR_DMAENAB 0x2000
	#define MUSB_RXCSR_DISNYET 0x1000
	#define MUSB_RXCSR_PID_ERR 0x1000
	#define MUSB_RXCSR_DMAMODE 0x0800
	#define MUSB_RXCSR_INCOMPRX 0x0100
	#define MUSB_RXCSR_CLRDATATOG 0x0080
	#define MUSB_RXCSR_FLUSHFIFO 0x0010
	#define MUSB_RXCSR_DATAERROR 0x0008
	#define MUSB_RXCSR_FIFOFULL 0x0002
	#define MUSB_RXCSR_RXPKTRDY 0x0001

	/* RXCSR in Peripheral mode */
	#define MUSB_RXCSR_P_ISO 0x4000
	#define MUSB_RXCSR_P_SENTSTALL 0x0040
	#define MUSB_RXCSR_P_SENDSTALL 0x0020
	#define MUSB_RXCSR_P_OVERRUN 0x0004

	/* RXCSR in Host mode */
	#define MUSB_RXCSR_H_AUTOREQ 0x4000
	#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
	#define MUSB_RXCSR_H_DATATOGGLE 0x0200
	#define MUSB_RXCSR_H_RXSTALL 0x0040
	#define MUSB_RXCSR_H_REQPKT 0x0020
	#define MUSB_RXCSR_H_ERROR 0x0004

	/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
	#define MUSB_RXCSR_P_WZC_BITS \
	(MUSB_RXCSR_P_SENTSTALL \| MUSB_RXCSR_P_OVERRUN \
	\| MUSB_RXCSR_RXPKTRDY)
	#define MUSB_RXCSR_H_WZC_BITS \
	(MUSB_RXCSR_H_RXSTALL \| MUSB_RXCSR_H_ERROR \
	\| MUSB_RXCSR_DATAERROR \| MUSB_RXCSR_RXPKTRDY)

	/* HUBADDR */
	#define MUSB_HUBADDR_MULTI_TT 0x80


	#ifndef CONFIG_BLACKFIN

	/* SUNXI has different reg addresses, but identical r/w functions */
	#ifndef CONFIG_ARCH_SUNXI

	/*
	* Common USB registers
	*/

	#define MUSB_FADDR 0x00 /* 8-bit */
	#define MUSB_POWER 0x01 /* 8-bit */

	#define MUSB_INTRTX 0x02 /* 16-bit */
	#define MUSB_INTRRX 0x04
	#define MUSB_INTRTXE 0x06
	#define MUSB_INTRRXE 0x08
	#define MUSB_INTRUSB 0x0A /* 8 bit */
	#define MUSB_INTRUSBE 0x0B /* 8 bit */
	#define MUSB_FRAME 0x0C
	#define MUSB_INDEX 0x0E /* 8 bit */
	#define MUSB_TESTMODE 0x0F /* 8 bit */

	/* Get offset for a given FIFO from musb->mregs */
	#if defined(CONFIG_USB_MUSB_TUSB6010) \|\| \
	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
	#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
	#else
	#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
	#endif

	/*
	* Additional Control Registers
	*/

	#define MUSB_DEVCTL 0x60 /* 8 bit */

	/* These are always controlled through the INDEX register */
	#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
	#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
	#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
	#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */

	/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
	#define MUSB_HWVERS 0x6C /* 8 bit */
	#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */
	#define MUSB_ULPI_INT_MASK 0x72 /* 8 bit */
	#define MUSB_ULPI_INT_SRC 0x73 /* 8 bit */
	#define MUSB_ULPI_REG_DATA 0x74 /* 8 bit */
	#define MUSB_ULPI_REG_ADDR 0x75 /* 8 bit */
	#define MUSB_ULPI_REG_CONTROL 0x76 /* 8 bit */
	#define MUSB_ULPI_RAW_DATA 0x77 /* 8 bit */

	#define MUSB_EPINFO 0x78 /* 8 bit */
	#define MUSB_RAMINFO 0x79 /* 8 bit */
	#define MUSB_LINKINFO 0x7a /* 8 bit */
	#define MUSB_VPLEN 0x7b /* 8 bit */
	#define MUSB_HS_EOF1 0x7c /* 8 bit */
	#define MUSB_FS_EOF1 0x7d /* 8 bit */
	#define MUSB_LS_EOF1 0x7e /* 8 bit */

	/* Offsets to endpoint registers */
	#define MUSB_TXMAXP 0x00
	#define MUSB_TXCSR 0x02
	#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
	#define MUSB_RXMAXP 0x04
	#define MUSB_RXCSR 0x06
	#define MUSB_RXCOUNT 0x08
	#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
	#define MUSB_TXTYPE 0x0A
	#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
	#define MUSB_TXINTERVAL 0x0B
	#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
	#define MUSB_RXTYPE 0x0C
	#define MUSB_RXINTERVAL 0x0D
	#define MUSB_FIFOSIZE 0x0F
	#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */

	/* Offsets to endpoint registers in indexed model (using INDEX register) */
	#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
	(0x10 + (_offset))

	/* Offsets to endpoint registers in flat models */
	#define MUSB_FLAT_OFFSET(_epnum, _offset) \
	(0x100 + (0x10*(_epnum)) + (_offset))

	#if defined(CONFIG_USB_MUSB_TUSB6010) \|\| \
	defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
	/* TUSB6010 EP0 configuration register is special */
	#define MUSB_TUSB_OFFSET(_epnum, _offset) \
	(0x10 + _offset)
	#include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
	#endif

	#define MUSB_TXCSR_MODE 0x2000

	/* "bus control"/target registers, for host side multipoint (external hubs) */
	#define MUSB_TXFUNCADDR 0x00
	#define MUSB_TXHUBADDR 0x02
	#define MUSB_TXHUBPORT 0x03

	#define MUSB_RXFUNCADDR 0x04
	#define MUSB_RXHUBADDR 0x06
	#define MUSB_RXHUBPORT 0x07

	#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
	(0x80 + (8*(_epnum)) + (_offset))

	#else /* CONFIG_ARCH_SUNXI */

	/*
	* Common USB registers
	*/

	#define MUSB_FADDR 0x0098
	#define MUSB_POWER 0x0040

	#define MUSB_INTRTX 0x0044
	#define MUSB_INTRRX 0x0046
	#define MUSB_INTRTXE 0x0048
	#define MUSB_INTRRXE 0x004A
	#define MUSB_INTRUSB 0x004C
	#define MUSB_INTRUSBE 0x0050
	#define MUSB_FRAME 0x0054
	#define MUSB_INDEX 0x0042
	#define MUSB_TESTMODE 0x007C

	/* Get offset for a given FIFO from musb->mregs */
	#define MUSB_FIFO_OFFSET(epnum) (0x00 + ((epnum) * 4))

	/*
	* Additional Control Registers
	*/

	#define MUSB_DEVCTL 0x0041

	/* These are always controlled through the INDEX register */
	#define MUSB_TXFIFOSZ 0x0090
	#define MUSB_RXFIFOSZ 0x0094
	#define MUSB_TXFIFOADD 0x0092
	#define MUSB_RXFIFOADD 0x0096

	#define MUSB_EPINFO 0x0078
	#define MUSB_RAMINFO 0x0079
	#define MUSB_LINKINFO 0x007A
	#define MUSB_VPLEN 0x007B
	#define MUSB_HS_EOF1 0x007C
	#define MUSB_FS_EOF1 0x007D
	#define MUSB_LS_EOF1 0x007E

	/* Offsets to endpoint registers */
	#define MUSB_TXMAXP 0x0080
	#define MUSB_TXCSR 0x0082
	#define MUSB_CSR0 0x0082
	#define MUSB_RXMAXP 0x0084
	#define MUSB_RXCSR 0x0086
	#define MUSB_RXCOUNT 0x0088
	#define MUSB_COUNT0 0x0088
	#define MUSB_TXTYPE 0x008C
	#define MUSB_TYPE0 0x008C
	#define MUSB_TXINTERVAL 0x008D
	#define MUSB_NAKLIMIT0 0x008D
	#define MUSB_RXTYPE 0x008E
	#define MUSB_RXINTERVAL 0x008F

	#define MUSB_CONFIGDATA 0x00b0 /* musb_read_configdata adds 0x10 ! */
	#define MUSB_FIFOSIZE 0x0090

	/* Offsets to endpoint registers in indexed model (using INDEX register) */
	#define MUSB_INDEXED_OFFSET(_epnum, _offset) (_offset)

	#define MUSB_TXCSR_MODE 0x2000

	/* "bus control"/target registers, for host side multipoint (external hubs) */
	#define MUSB_TXFUNCADDR 0x0098
	#define MUSB_TXHUBADDR 0x009A
	#define MUSB_TXHUBPORT 0x009B

	#define MUSB_RXFUNCADDR 0x009C
	#define MUSB_RXHUBADDR 0x009E
	#define MUSB_RXHUBPORT 0x009F

	/* Endpoint is selected with MUSB_INDEX. */
	#define MUSB_BUSCTL_OFFSET(_epnum, _offset) (_offset)

	#endif /* CONFIG_ARCH_SUNXI */

	static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
	{
	musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
	}

	static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
	{
	musb_writew(mbase, MUSB_TXFIFOADD, c_off);
	}

	static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
	{
	musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
	}

	static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
	{
	musb_writew(mbase, MUSB_RXFIFOADD, c_off);
	}

	static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
	{
	#ifndef CONFIG_ARCH_SUNXI /* No ulpi on sunxi */
	musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
	#endif
	}

	static inline u8 musb_read_txfifosz(void __iomem *mbase)
	{
	return musb_readb(mbase, MUSB_TXFIFOSZ);
	}

	static inline u16 musb_read_txfifoadd(void __iomem *mbase)
	{
	return musb_readw(mbase, MUSB_TXFIFOADD);
	}

	static inline u8 musb_read_rxfifosz(void __iomem *mbase)
	{
	return musb_readb(mbase, MUSB_RXFIFOSZ);
	}

	static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
	{
	return musb_readw(mbase, MUSB_RXFIFOADD);
	}

	static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
	{
	#ifdef CONFIG_ARCH_SUNXI /* No ulpi on sunxi */
	return 0;
	#else
	return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
	#endif
	}

	static inline u8 musb_read_configdata(void __iomem *mbase)
	{
	#ifdef CONFIG_MACH_SUN8I_A33
	/* <Sigh> allwinner saves a reg, and we need to hardcode this */
	return 0xde;
	#else
	musb_writeb(mbase, MUSB_INDEX, 0);
	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
	#endif
	}

	static inline u16 musb_read_hwvers(void __iomem *mbase)
	{
	#ifdef CONFIG_ARCH_SUNXI
	return 0; /* Unknown version */
	#else
	return musb_readw(mbase, MUSB_HWVERS);
	#endif
	}

	static inline void __iomem musb_read_target_reg_base(u8 i, void __iomem mbase)
	{
	return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
	}

	static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
	u8 qh_addr_reg)
	{
	musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
	}

	static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
	u8 qh_h_addr_reg)
	{
	musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
	}

	static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
	u8 qh_h_port_reg)
	{
	musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
	}

	static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
	u8 qh_addr_reg)
	{
	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
	qh_addr_reg);
	}

	static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
	u8 qh_addr_reg)
	{
	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
	qh_addr_reg);
	}

	static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
	u8 qh_h_port_reg)
	{
	musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
	qh_h_port_reg);
	}

	static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
	{
	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
	}

	static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
	{
	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
	}

	static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
	{
	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
	}

	static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
	{
	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
	}

	static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
	{
	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
	}

	static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
	{
	return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
	}

	#else /* CONFIG_BLACKFIN */

	#define USB_BASE USB_FADDR
	#define USB_OFFSET(reg) (reg - USB_BASE)

	/*
	* Common USB registers
	*/
	#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
	#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
	#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
	#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
	#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
	#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
	#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
	#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
	#define MUSB_FRAME USB_OFFSET(USB_FRAME)
	#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
	#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */

	/* Get offset for a given FIFO from musb->mregs */
	#define MUSB_FIFO_OFFSET(epnum) \
	(USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))

	/*
	* Additional Control Registers
	*/

	#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */

	#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
	#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
	#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
	#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
	#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */

	/* Offsets to endpoint registers */
	#define MUSB_TXMAXP 0x00
	#define MUSB_TXCSR 0x04
	#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
	#define MUSB_RXMAXP 0x08
	#define MUSB_RXCSR 0x0C
	#define MUSB_RXCOUNT 0x10
	#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
	#define MUSB_TXTYPE 0x14
	#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
	#define MUSB_TXINTERVAL 0x18
	#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
	#define MUSB_RXTYPE 0x1C
	#define MUSB_RXINTERVAL 0x20
	#define MUSB_TXCOUNT 0x28

	/* Offsets to endpoint registers in indexed model (using INDEX register) */
	#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
	(0x40 + (_offset))

	/* Offsets to endpoint registers in flat models */
	#define MUSB_FLAT_OFFSET(_epnum, _offset) \
	(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))

	/* Not implemented - HW has separate Tx/Rx FIFO */
	#define MUSB_TXCSR_MODE 0x0000

	static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
	{
	}

	static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
	{
	}

	static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
	{
	}

	static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
	{
	}

	static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
	{
	}

	static inline u8 musb_read_txfifosz(void __iomem *mbase)
	{
	return 0;
	}

	static inline u16 musb_read_txfifoadd(void __iomem *mbase)
	{
	return 0;
	}

	static inline u8 musb_read_rxfifosz(void __iomem *mbase)
	{
	return 0;
	}

	static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
	{
	return 0;
	}

	static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
	{
	return 0;
	}

	static inline u8 musb_read_configdata(void __iomem *mbase)
	{
	return 0;
	}

	static inline u16 musb_read_hwvers(void __iomem *mbase)
	{
	/*
	* This register is invisible on Blackfin, actually the MUSB
	* RTL version of Blackfin is 1.9, so just harcode its value.
	*/
	return MUSB_HWVERS_1900;
	}

	static inline void __iomem musb_read_target_reg_base(u8 i, void __iomem mbase)
	{
	return NULL;
	}

	static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
	u8 qh_addr_req)
	{
	}

	static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
	u8 qh_h_addr_reg)
	{
	}

	static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
	u8 qh_h_port_reg)
	{
	}

	static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
	u8 qh_addr_reg)
	{
	}

	static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
	u8 qh_addr_reg)
	{
	}

	static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
	u8 qh_h_port_reg)
	{
	}

	static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
	{
	return 0;
	}

	static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
	{
	return 0;
	}

	static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
	{
	return 0;
	}

	static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
	{
	return 0;
	}

	static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
	{
	return 0;
	}

	static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
	{
	return 0;
	}

	#endif /* CONFIG_BLACKFIN */

	#endif /* __MUSB_REGS_H__ */