| /* |
| * Copyright (C) 2016, STMicroelectronics - All Rights Reserved |
| * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_SYS_FLASH_BASE 0x08000000 |
| #define CONFIG_SYS_INIT_SP_ADDR 0x20050000 |
| |
| #ifdef CONFIG_SUPPORT_SPL |
| #define CONFIG_SYS_TEXT_BASE 0x08008000 |
| #define CONFIG_SYS_LOAD_ADDR 0x08008000 |
| #else |
| #define CONFIG_SYS_TEXT_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_LOAD_ADDR 0xC0400000 |
| #define CONFIG_LOADADDR 0xC0400000 |
| #endif |
| |
| /* |
| * Configuration of the external SDRAM memory |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| |
| #define CONFIG_SYS_MAX_FLASH_SECT 8 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| |
| #define CONFIG_ENV_SIZE (8 << 10) |
| |
| #define CONFIG_STM32_FLASH |
| |
| #define CONFIG_DW_GMAC_DEFAULT_DMA_PBL (8) |
| #define CONFIG_DW_ALTDESCRIPTOR |
| #define CONFIG_MII |
| #define CONFIG_PHY_SMSC |
| |
| #define CONFIG_STM32_HSE_HZ 25000000 |
| #define CONFIG_SYS_CLK_FREQ 200000000 /* 200 MHz */ |
| #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ |
| |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_INITRD_TAG |
| #define CONFIG_REVISION_TAG |
| |
| #define CONFIG_SYS_CBSIZE 1024 |
| |
| #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "run bootcmd_romfs" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ |
| "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ |
| "bootm 0x08044000 - 0x08042000\0" |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #define CONFIG_SYS_LONGHELP |
| #define CONFIG_AUTO_COMPLETE |
| #define CONFIG_CMDLINE_EDITING |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_BOARD_LATE_INIT |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| /* For SPL */ |
| #ifdef CONFIG_SUPPORT_SPL |
| #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR |
| #define CONFIG_SPL_FRAMEWORK |
| #define CONFIG_SPL_BOARD_INIT |
| #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_MONITOR_LEN (512 * 1024) |
| #define CONFIG_SYS_SPL_LEN 0x00008000 |
| #define CONFIG_SYS_UBOOT_START 0x080083FD |
| #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ |
| CONFIG_SYS_SPL_LEN) |
| |
| /* DT blob (fdt) address */ |
| #define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ |
| 0x1C0000) |
| #endif |
| /* For SPL ends */ |
| |
| #endif /* __CONFIG_H */ |