| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (c) 2021 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| * |
| * Copyright (c) 2021 Rockchip, Inc. |
| * |
| * Copyright (C) 2018 Texas Instruments, Inc |
| */ |
| |
| #ifndef PCIE_DW_COMMON_H |
| #define PCIE_DW_COMMON_H |
| |
| #define DEFAULT_DBI_ATU_OFFSET (0x3 << 20) |
| |
| /* PCI DBICS registers */ |
| #define PCIE_LINK_STATUS_REG 0x80 |
| #define PCIE_LINK_STATUS_SPEED_OFF 16 |
| #define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) |
| #define PCIE_LINK_STATUS_WIDTH_OFF 20 |
| #define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) |
| |
| /* |
| * iATU Unroll-specific register definitions |
| * From 4.80 core version the address translation will be made by unroll. |
| * The registers are offset from atu_base |
| */ |
| #define PCIE_ATU_UNR_REGION_CTRL1 0x00 |
| #define PCIE_ATU_UNR_REGION_CTRL2 0x04 |
| #define PCIE_ATU_UNR_LOWER_BASE 0x08 |
| #define PCIE_ATU_UNR_UPPER_BASE 0x0c |
| #define PCIE_ATU_UNR_LIMIT 0x10 |
| #define PCIE_ATU_UNR_LOWER_TARGET 0x14 |
| #define PCIE_ATU_UNR_UPPER_TARGET 0x18 |
| |
| #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) |
| #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) |
| #define PCIE_ATU_TYPE_MEM (0x0 << 0) |
| #define PCIE_ATU_TYPE_IO (0x2 << 0) |
| #define PCIE_ATU_TYPE_CFG0 (0x4 << 0) |
| #define PCIE_ATU_TYPE_CFG1 (0x5 << 0) |
| #define PCIE_ATU_ENABLE (0x1 << 31) |
| #define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) |
| #define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) |
| #define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) |
| #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) |
| |
| /* Register address builder */ |
| #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9) |
| |
| /* Parameters for the waiting for iATU enabled routine */ |
| #define LINK_WAIT_MAX_IATU_RETRIES 5 |
| #define LINK_WAIT_IATU_US 10000 |
| |
| /* PCI DBICS registers */ |
| #define PCIE_LINK_STATUS_REG 0x80 |
| #define PCIE_LINK_STATUS_SPEED_OFF 16 |
| #define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF) |
| #define PCIE_LINK_STATUS_WIDTH_OFF 20 |
| #define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF) |
| |
| #define PCIE_LINK_CAPABILITY 0x7c |
| #define PCIE_LINK_CTL_2 0xa0 |
| #define TARGET_LINK_SPEED_MASK 0xf |
| #define LINK_SPEED_GEN_1 0x1 |
| #define LINK_SPEED_GEN_2 0x2 |
| #define LINK_SPEED_GEN_3 0x3 |
| |
| /* Synopsys-specific PCIe configuration registers */ |
| #define PCIE_PORT_LINK_CONTROL 0x710 |
| #define PORT_LINK_DLL_LINK_EN BIT(5) |
| #define PORT_LINK_FAST_LINK_MODE BIT(7) |
| #define PORT_LINK_MODE_MASK GENMASK(21, 16) |
| #define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n) |
| #define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1) |
| #define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3) |
| #define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7) |
| #define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf) |
| |
| #define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C |
| #define PORT_LOGIC_N_FTS_MASK GENMASK(7, 0) |
| #define PORT_LOGIC_SPEED_CHANGE BIT(17) |
| #define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8) |
| #define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n) |
| #define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1) |
| #define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2) |
| #define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4) |
| #define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8) |
| |
| #define PCIE_MISC_CONTROL_1_OFF 0x8bc |
| #define PCIE_DBI_RO_WR_EN BIT(0) |
| |
| /* Parameters for the waiting for iATU enabled routine */ |
| #define LINK_WAIT_MAX_IATU_RETRIES 5 |
| #define LINK_WAIT_IATU 10000 |
| |
| /** |
| * struct pcie_dw - DW PCIe controller state |
| * |
| * @dbi_base: The base address of dbi register space |
| * @cfg_base: The base address of configuration space |
| * @atu_base: The base address of ATU space |
| * @cfg_size: The size of the configuration space which is needed |
| * as it gets written into the PCIE_ATU_LIMIT register |
| * @first_busno: This driver supports multiple PCIe controllers. |
| * first_busno stores the bus number of the PCIe root-port |
| * number which may vary depending on the PCIe setup |
| * (PEX switches etc). |
| * @io: The IO space for EP's BAR |
| * @mem: The memory space for EP's BAR |
| * @prefetch: The prefetch space for EP's BAR |
| */ |
| struct pcie_dw { |
| struct udevice *dev; |
| void __iomem *dbi_base; |
| void __iomem *cfg_base; |
| void __iomem *atu_base; |
| fdt_size_t cfg_size; |
| |
| int first_busno; |
| |
| /* IO, MEM & PREFETCH PCI regions */ |
| struct pci_region io; |
| struct pci_region mem; |
| struct pci_region prefetch; |
| }; |
| |
| int pcie_dw_get_link_speed(struct pcie_dw *pci); |
| |
| int pcie_dw_get_link_width(struct pcie_dw *pci); |
| |
| int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, int type, u64 cpu_addr, |
| u64 pci_addr, u32 size); |
| |
| int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep, |
| enum pci_size_t size); |
| |
| int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value, |
| enum pci_size_t size); |
| |
| static inline void dw_pcie_dbi_write_enable(struct pcie_dw *pci, bool en) |
| { |
| u32 val; |
| |
| val = readl(pci->dbi_base + PCIE_MISC_CONTROL_1_OFF); |
| if (en) |
| val |= PCIE_DBI_RO_WR_EN; |
| else |
| val &= ~PCIE_DBI_RO_WR_EN; |
| writel(val, pci->dbi_base + PCIE_MISC_CONTROL_1_OFF); |
| } |
| |
| void pcie_dw_setup_host(struct pcie_dw *pci); |
| |
| #endif |