| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Microhip / Atmel Corporation |
| * Wenyou.Yang <wenyou.yang@microchip.com> |
| */ |
| |
| #include <common.h> |
| #include <clk-uclass.h> |
| #include <dm/device.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <mach/at91_pmc.h> |
| #include "pmc.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define AT91_USB_CLK_SOURCE_MAX 2 |
| #define AT91_USB_CLK_MAX_DIV 15 |
| |
| struct at91_usb_clk_priv { |
| u32 num_clksource; |
| }; |
| |
| static ulong at91_usb_clk_get_rate(struct clk *clk) |
| { |
| struct pmc_platdata *plat = dev_get_platdata(clk->dev); |
| struct at91_pmc *pmc = plat->reg_base; |
| struct clk source; |
| u32 tmp, usbdiv; |
| u8 source_index; |
| int ret; |
| |
| tmp = readl(&pmc->pcr); |
| source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) & |
| AT91_PMC_USB_USBS_MASK; |
| usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK; |
| |
| ret = clk_get_by_index(clk->dev, source_index, &source); |
| if (ret) |
| return 0; |
| |
| return clk_get_rate(&source) / (usbdiv + 1); |
| } |
| |
| static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct pmc_platdata *plat = dev_get_platdata(clk->dev); |
| struct at91_pmc *pmc = plat->reg_base; |
| struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev); |
| struct clk source, best_source; |
| ulong tmp_rate, best_rate = rate, source_rate; |
| int tmp_diff, best_diff = -1; |
| u32 div, best_div = 0; |
| u8 best_source_index = 0; |
| u8 i; |
| u32 tmp; |
| int ret; |
| |
| for (i = 0; i < priv->num_clksource; i++) { |
| ret = clk_get_by_index(clk->dev, i, &source); |
| if (ret) |
| return ret; |
| |
| source_rate = clk_get_rate(&source); |
| if (IS_ERR_VALUE(source_rate)) |
| return source_rate; |
| |
| for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) { |
| tmp_rate = DIV_ROUND_CLOSEST(source_rate, div); |
| tmp_diff = abs(rate - tmp_rate); |
| |
| if (best_diff < 0 || best_diff > tmp_diff) { |
| best_rate = tmp_rate; |
| best_diff = tmp_diff; |
| |
| best_div = div - 1; |
| best_source = source; |
| best_source_index = i; |
| } |
| |
| if (!best_diff || tmp_rate < rate) |
| break; |
| } |
| |
| if (!best_diff) |
| break; |
| } |
| |
| debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n", |
| best_source.dev->name, best_rate, best_div); |
| |
| ret = clk_enable(&best_source); |
| if (ret) |
| return ret; |
| |
| tmp = AT91_PMC_USB_USBS_(best_source_index) | |
| AT91_PMC_USB_DIV_(best_div); |
| writel(tmp, &pmc->usb); |
| |
| return 0; |
| } |
| |
| static struct clk_ops at91_usb_clk_ops = { |
| .get_rate = at91_usb_clk_get_rate, |
| .set_rate = at91_usb_clk_set_rate, |
| }; |
| |
| static int at91_usb_clk_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct at91_usb_clk_priv *priv = dev_get_priv(dev); |
| u32 cells[AT91_USB_CLK_SOURCE_MAX]; |
| u32 num_clksource; |
| |
| num_clksource = fdtdec_get_int_array_count(gd->fdt_blob, |
| dev_of_offset(dev), |
| "clocks", cells, |
| AT91_USB_CLK_SOURCE_MAX); |
| |
| if (!num_clksource) |
| return -1; |
| |
| priv->num_clksource = num_clksource; |
| |
| return 0; |
| } |
| |
| static int at91_usb_clk_probe(struct udevice *dev) |
| { |
| return at91_pmc_core_probe(dev); |
| } |
| |
| static const struct udevice_id at91_usb_clk_match[] = { |
| { .compatible = "atmel,at91sam9x5-clk-usb" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(at91_usb_clk) = { |
| .name = "at91-usb-clk", |
| .id = UCLASS_CLK, |
| .of_match = at91_usb_clk_match, |
| .probe = at91_usb_clk_probe, |
| .ofdata_to_platdata = at91_usb_clk_ofdata_to_platdata, |
| .priv_auto_alloc_size = sizeof(struct at91_usb_clk_priv), |
| .platdata_auto_alloc_size = sizeof(struct pmc_platdata), |
| .ops = &at91_usb_clk_ops, |
| }; |