include/configs/titanium.h - platform/external/u-boot - Gitiles

 /*
  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
  *
  * Configuration settings for the ProjectionDesign / Barco
  * Titanium board.
  *
  * Based on mx6qsabrelite.h which is:
  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include "mx6_common.h"

 #define CONFIG_MX6Q

 #define MACH_TYPE_TITANIUM		3769
 #define CONFIG_MACH_TYPE		MACH_TYPE_TITANIUM

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(2 * 1024 * 1024)

 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R

 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE

 /* I2C Configs */
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000

 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	1

 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_FEC_MXC_PHYADDR		4
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021

 /* USB Configs */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0

 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE

 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (500 << 20))

 #define CONFIG_HOSTNAME			titanium
 #define CONFIG_UBI_PART			ubi
 #define CONFIG_UBIFS_VOLUME		rootfs0

 #define MTDIDS_DEFAULT		"nand0=gpmi-nand"
 #define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
 				"512k(env2),-(ubi)"

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
 	"kernel_fs=/boot/uImage\0"					\
 	"kernel_addr=11000000\0"					\
 	"dtb=" __stringify(CONFIG_HOSTNAME) "/"				\
 		__stringify(CONFIG_HOSTNAME) ".dtb\0"			\
 	"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"		\
 	"dtb_addr=12800000\0"						\
 	"script=boot.scr\0" \
 	"uimage=uImage\0" \
 	"console=ttymxc0\0" \
 	"baudrate=115200\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
 	"uimage=uImage\0" \
 	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
 		" ${script}\0" \
 	"bootscript=echo Running bootscript from mmc ...; source\0" \
 	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 	"mmcroot=/dev/mmcblk0p2\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot} rootwait rw\0" \
 	"bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
 		" ${uimage}; bootm\0" \
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addcon=setenv bootargs ${bootargs} console=ttymxc0,"		\
 		"${baudrate}\0"						\
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"	\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"		\
 	"part=" __stringify(CONFIG_UBI_PART) "\0"			\
 	"boot_vol=0\0"							\
 	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"			\
 	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0"			\
 	"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}"	\
 		" ${filesize}\0"					\
 	"upd_ubifs=run load_ubifs update_ubifs\0"			\
 	"init_ubi=nand erase.part ubi;ubi part ${part};"		\
 		"ubi create ${vol} c800000\0"				\
 	"mtdids=" MTDIDS_DEFAULT "\0"					\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
 	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"		\
 		" addcon addmtd;"					\
 		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
 	"ubifsargs=set bootargs ubi.mtd=ubi "				\
 		"root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"		\
 	"ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"	\
 	"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"		\
 		"ubifsload ${dtb_addr} ${dtb_fs};\0"			\
 	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon "	\
 		"addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"		\
 	"load_kernel=tftp ${kernel_addr} ${kernel}\0"			\
 	"load_dtb=tftp ${dtb_addr} ${dtb}\0"				\
 	"net_nfs=run load_dtb load_kernel; "				\
 		"run nfsargs addip addcon addmtd;"			\
 		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
 	"delenv=env default -a -f; saveenv; reset\0"

 #define CONFIG_BOOTCOMMAND		"run nand_ubifs"

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_PROMPT		"Titanium > "

 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					 sizeof(CONFIG_SYS_PROMPT) + 16)

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 #define PHYS_SDRAM_SIZE			(512 << 20)

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* Enable NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_CMD_TIME

 #ifdef CONFIG_CMD_NAND

 /* NAND stuff */
 #define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION

 /* DMA stuff, needed for GPMI/MXS NAND support */
 #define CONFIG_APBH_DMA
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8

 /* Environment in NAND */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		(16 << 20)
 #define CONFIG_ENV_SECT_SIZE		(128 << 10)
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

 #else /* CONFIG_CMD_NAND */

 /* Environment in MMC */
 #define CONFIG_ENV_SIZE			(8 << 10)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0

 #endif /* CONFIG_CMD_NAND */

 /* UBI/UBIFS config options */
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_RBTREE
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS

 #endif			       /* __CONFIG_H */
	/*
	* Copyright (C) 2013 Stefan Roese <sr@denx.de>
	*
	* Configuration settings for the ProjectionDesign / Barco
	* Titanium board.
	*
	* Based on mx6qsabrelite.h which is:
	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include "mx6_common.h"

	#define CONFIG_MX6Q

	#define MACH_TYPE_TITANIUM 3769
	#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)

	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_MISC_INIT_R

	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART1_BASE

	/* I2C Configs */
	#define CONFIG_CMD_I2C
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_SYS_I2C_SPEED 100000

	/* MMC Configs */
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_USDHC_NUM 1

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_MII
	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_FEC_MXC_PHYADDR 4
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL
	#define CONFIG_PHY_MICREL_KSZ9021

	/* USB Configs */
	#define CONFIG_CMD_USB
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX6
	#define CONFIG_USB_STORAGE
	#define CONFIG_MXC_USB_PORT 1
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0

	/* Miscellaneous commands */
	#define CONFIG_CMD_BMODE

	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))

	#define CONFIG_HOSTNAME titanium
	#define CONFIG_UBI_PART ubi
	#define CONFIG_UBIFS_VOLUME rootfs0

	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
	"512k(env2),-(ubi)"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	"kernel_fs=/boot/uImage\0" \
	"kernel_addr=11000000\0" \
	"dtb=" __stringify(CONFIG_HOSTNAME) "/" \
	__stringify(CONFIG_HOSTNAME) ".dtb\0" \
	"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
	"dtb_addr=12800000\0" \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc0\0" \
	"baudrate=115200\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"uimage=uImage\0" \
	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
	" ${script}\0" \
	"bootscript=echo Running bootscript from mmc ...; source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"mmcroot=/dev/mmcblk0p2\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot} rootwait rw\0" \
	"bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
	" ${uimage}; bootm\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off panic=1\0" \
	"addcon=setenv bootargs ${bootargs} console=ttymxc0," \
	"${baudrate}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
	"part=" __stringify(CONFIG_UBI_PART) "\0" \
	"boot_vol=0\0" \
	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
	"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
	" ${filesize}\0" \
	"upd_ubifs=run load_ubifs update_ubifs\0" \
	"init_ubi=nand erase.part ubi;ubi part ${part};" \
	"ubi create ${vol} c800000\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
	" addcon addmtd;" \
	"bootm ${kernel_addr} - ${dtb_addr}\0" \
	"ubifsargs=set bootargs ubi.mtd=ubi " \
	"root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
	"ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
	"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
	"ubifsload ${dtb_addr} ${dtb_fs};\0" \
	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
	"addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
	"load_kernel=tftp ${kernel_addr} ${kernel}\0" \
	"load_dtb=tftp ${dtb_addr} ${dtb}\0" \
	"net_nfs=run load_dtb load_kernel; " \
	"run nfsargs addip addcon addmtd;" \
	"bootm ${kernel_addr} - ${dtb_addr}\0" \
	"delenv=env default -a -f; saveenv; reset\0"

	#define CONFIG_BOOTCOMMAND "run nand_ubifs"

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_PROMPT "Titanium > "

	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	sizeof(CONFIG_SYS_PROMPT) + 16)

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	#define PHYS_SDRAM_SIZE (512 << 20)

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* Enable NAND support */
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_NAND_TRIMFFS
	#define CONFIG_CMD_TIME

	#ifdef CONFIG_CMD_NAND

	/* NAND stuff */
	#define CONFIG_NAND_MXS
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x40000000
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_ONFI_DETECTION

	/* DMA stuff, needed for GPMI/MXS NAND support */
	#define CONFIG_APBH_DMA
	#define CONFIG_APBH_DMA_BURST
	#define CONFIG_APBH_DMA_BURST8

	/* Environment in NAND */
	#define CONFIG_ENV_IS_IN_NAND
	#define CONFIG_ENV_OFFSET (16 << 20)
	#define CONFIG_ENV_SECT_SIZE (128 << 10)
	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE

	#else /* CONFIG_CMD_NAND */

	/* Environment in MMC */
	#define CONFIG_ENV_SIZE (8 << 10)
	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	#define CONFIG_SYS_MMC_ENV_DEV 0

	#endif /* CONFIG_CMD_NAND */

	/* UBI/UBIFS config options */
	#define CONFIG_LZO
	#define CONFIG_MTD_DEVICE
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_RBTREE
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_CMD_UBI
	#define CONFIG_CMD_UBIFS

	#endif /* __CONFIG_H */