blob: c835cd0d47b112f666cf7f38017ebf55881e37b3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010-2015
* NVIDIA Corporation <www.nvidia.com>
*/
/* Tegra30 Clock control functions */
#include <common.h>
#include <errno.h>
#include <init.h>
#include <log.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/clk_rst.h>
#include <asm/arch-tegra/timer.h>
#include <div64.h>
#include <fdtdec.h>
#include <linux/delay.h>
/*
* Clock types that we can use as a source. The Tegra30 has muxes for the
* peripheral clocks, and in most cases there are four options for the clock
* source. This gives us a clock 'type' and exploits what commonality exists
* in the device.
*
* Letters are obvious, except for T which means CLK_M, and S which means the
* clock derived from 32KHz. Beware that CLK_M (also called OSC in the
* datasheet) and PLL_M are different things. The former is the basic
* clock supplied to the SOC from an external oscillator. The latter is the
* memory clock PLL.
*
* See definitions in clock_id in the header file.
*/
enum clock_type_id {
CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
CLOCK_TYPE_MCPA, /* and so on */
CLOCK_TYPE_MCPT,
CLOCK_TYPE_PCM,
CLOCK_TYPE_PCMT,
CLOCK_TYPE_PCMT16,
CLOCK_TYPE_PDCT,
CLOCK_TYPE_ACPT,
CLOCK_TYPE_ASPTE,
CLOCK_TYPE_PMDACD2T,
CLOCK_TYPE_PCST,
CLOCK_TYPE_COUNT,
CLOCK_TYPE_NONE = -1, /* invalid clock type */
};
enum {
CLOCK_MAX_MUX = 8 /* number of source options for each clock */
};
/*
* Clock source mux for each clock type. This just converts our enum into
* a list of mux sources for use by the code.
*
* Note:
* The extra column in each clock source array is used to store the mask
* bits in its register for the source.
*/
#define CLK(x) CLOCK_ID_ ## x
static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
{ CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
{ CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_29},
{ CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO),
CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
MASK_BITS_31_29},
{ CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_28}
};
/*
* Clock type for each peripheral clock source. We put the name in each
* record just so it is easy to match things up
*/
#define TYPE(name, type) type
static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
/* 0x00 */
TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT),
/* 0x08 */
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T),
TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T),
/* 0x10 */
TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
/* 0x18 */
TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */
TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
/* 0x20 */
TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
/* 0x28 */
TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
/* 0x30 */
TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
/* 0x38h */ /* Jumps to reg offset 0x3B0h - new for T30 */
TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */
TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16),
TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT),
/* 0x40 */
TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT),
TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT),
TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT),
TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */
TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
/* 0x48 */
TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */
TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
/* 0x50 */
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */
TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT),
};
/*
* This array translates a periph_id to a periphc_internal_id
*
* Not present/matched up:
* uint vi_sensor; _VI_SENSOR_0, 0x1A8
* SPDIF - which is both 0x08 and 0x0c
*
*/
#define NONE(name) (-1)
#define OFFSET(name, value) PERIPHC_ ## name
static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
/* Low word: 31:0 */
NONE(CPU),
NONE(COP),
NONE(TRIGSYS),
NONE(RESERVED3),
NONE(RESERVED4),
NONE(TMR),
PERIPHC_UART1,
PERIPHC_UART2, /* and vfir 0x68 */
/* 8 */
NONE(GPIO),
PERIPHC_SDMMC2,
NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
PERIPHC_I2S1,
PERIPHC_I2C1,
PERIPHC_NDFLASH,
PERIPHC_SDMMC1,
PERIPHC_SDMMC4,
/* 16 */
NONE(RESERVED16),
PERIPHC_PWM,
PERIPHC_I2S2,
PERIPHC_EPP,
PERIPHC_VI,
PERIPHC_G2D,
NONE(USBD),
NONE(ISP),
/* 24 */
PERIPHC_G3D,
NONE(RESERVED25),
PERIPHC_DISP2,
PERIPHC_DISP1,
PERIPHC_HOST1X,
NONE(VCP),
PERIPHC_I2S0,
NONE(CACHE2),
/* Middle word: 63:32 */
NONE(MEM),
NONE(AHBDMA),
NONE(APBDMA),
NONE(RESERVED35),
NONE(RESERVED36),
NONE(STAT_MON),
NONE(RESERVED38),
NONE(RESERVED39),
/* 40 */
NONE(KFUSE),
PERIPHC_SBC1,
PERIPHC_NOR,
NONE(RESERVED43),
PERIPHC_SBC2,
NONE(RESERVED45),
PERIPHC_SBC3,
PERIPHC_DVC_I2C,
/* 48 */
NONE(DSI),
PERIPHC_TVO, /* also CVE 0x40 */
PERIPHC_MIPI,
PERIPHC_HDMI,
NONE(CSI),
PERIPHC_TVDAC,
PERIPHC_I2C2,
PERIPHC_UART3,
/* 56 */
NONE(RESERVED56),
PERIPHC_EMC,
NONE(USB2),
NONE(USB3),
PERIPHC_MPE,
PERIPHC_VDE,
NONE(BSEA),
NONE(BSEV),
/* Upper word 95:64 */
PERIPHC_SPEEDO,
PERIPHC_UART4,
PERIPHC_UART5,
PERIPHC_I2C3,
PERIPHC_SBC4,
PERIPHC_SDMMC3,
NONE(PCIE),
PERIPHC_OWR,
/* 72 */
NONE(AFI),
PERIPHC_CSITE,
NONE(PCIEXCLK),
NONE(AVPUCQ),
NONE(RESERVED76),
NONE(RESERVED77),
NONE(RESERVED78),
NONE(DTV),
/* 80 */
PERIPHC_NANDSPEED,
PERIPHC_I2CSLOW,
NONE(DSIB),
NONE(RESERVED83),
NONE(IRAMA),
NONE(IRAMB),
NONE(IRAMC),
NONE(IRAMD),
/* 88 */
NONE(CRAM2),
NONE(RESERVED89),
NONE(MDOUBLER),
NONE(RESERVED91),
NONE(SUSOUT),
NONE(RESERVED93),
NONE(RESERVED94),
NONE(RESERVED95),
/* V word: 31:0 */
NONE(CPUG),
NONE(CPULP),
PERIPHC_G3D2,
PERIPHC_MSELECT,
PERIPHC_TSENSOR,
PERIPHC_I2S3,
PERIPHC_I2S4,
PERIPHC_I2C4,
/* 08 */
PERIPHC_SBC5,
PERIPHC_SBC6,
PERIPHC_AUDIO,
NONE(APBIF),
PERIPHC_DAM0,
PERIPHC_DAM1,
PERIPHC_DAM2,
PERIPHC_HDA2CODEC2X,
/* 16 */
NONE(ATOMICS),
NONE(RESERVED17),
NONE(RESERVED18),
NONE(RESERVED19),
NONE(RESERVED20),
NONE(RESERVED21),
NONE(RESERVED22),
PERIPHC_ACTMON,
/* 24 */
NONE(RESERVED24),
NONE(RESERVED25),
NONE(RESERVED26),
NONE(RESERVED27),
PERIPHC_SATA,
PERIPHC_HDA,
NONE(RESERVED30),
NONE(RESERVED31),
/* W word: 31:0 */
NONE(HDA2HDMICODEC),
NONE(SATACOLD),
NONE(RESERVED0_PCIERX0),
NONE(RESERVED1_PCIERX1),
NONE(RESERVED2_PCIERX2),
NONE(RESERVED3_PCIERX3),
NONE(RESERVED4_PCIERX4),
NONE(RESERVED5_PCIERX5),
/* 40 */
NONE(CEC),
NONE(RESERVED6_PCIE2),
NONE(RESERVED7_EMC),
NONE(RESERVED8_HDMI),
NONE(RESERVED9_SATA),
NONE(RESERVED10_MIPI),
NONE(EX_RESERVED46),
NONE(EX_RESERVED47),
};
/*
* PLL divider shift/mask tables for all PLL IDs.
*/
struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
/*
* T30: some deviations from T2x.
* NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.)
* If lock_ena or lock_det are >31, they're not used in that PLL.
*/
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x0F,
.lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 }, /* PLLC */
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 0, .p_mask = 0,
.lock_ena = 0, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLP */
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLA */
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01,
.lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLU */
{ .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
.lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLD */
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x0F,
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLX */
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0,
.lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */
{ .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07,
.lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLS (RESERVED) */
};
/*
* Get the oscillator frequency, from the corresponding hardware configuration
* field. Note that T30 supports 3 new higher freqs, but we map back
* to the old T20 freqs. Support for the higher oscillators is TBD.
*/
enum clock_osc_freq clock_get_osc_freq(void)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 reg;
reg = readl(&clkrst->crc_osc_ctrl);
reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
if (reg & 1) /* one of the newer freqs */
printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
return reg >> 2; /* Map to most common (T20) freqs */
}
/* Returns a pointer to the clock source register for a peripheral */
u32 *get_periph_source_reg(enum periph_id periph_id)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
enum periphc_internal_id internal_id;
/* Coresight is a special case */
if (periph_id == PERIPH_ID_CSI)
return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
internal_id = periph_id_to_internal_id[periph_id];
assert(internal_id != -1);
if (internal_id >= PERIPHC_VW_FIRST) {
internal_id -= PERIPHC_VW_FIRST;
return &clkrst->crc_clk_src_vw[internal_id];
} else
return &clkrst->crc_clk_src[internal_id];
}
int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
int *divider_bits, int *type)
{
enum periphc_internal_id internal_id;
if (!clock_periph_id_isvalid(periph_id))
return -1;
internal_id = periph_id_to_internal_id[periph_id];
if (!periphc_internal_id_isvalid(internal_id))
return -1;
*type = clock_periph_type[internal_id];
if (!clock_type_id_isvalid(*type))
return -1;
*mux_bits = clock_source[*type][CLOCK_MAX_MUX];
if (*type == CLOCK_TYPE_PCMT16)
*divider_bits = 16;
else
*divider_bits = 8;
return 0;
}
enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
{
enum periphc_internal_id internal_id;
int type;
if (!clock_periph_id_isvalid(periph_id))
return CLOCK_ID_NONE;
internal_id = periph_id_to_internal_id[periph_id];
if (!periphc_internal_id_isvalid(internal_id))
return CLOCK_ID_NONE;
type = clock_periph_type[internal_id];
if (!clock_type_id_isvalid(type))
return CLOCK_ID_NONE;
return clock_source[type][source];
}
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
*
* There is special code here to handle the one source type with 5 sources.
*
* @param periph_id peripheral to start
* @param source PLL id of required parent clock
* @param mux_bits Set to number of bits in mux register: 2 or 4
* @param divider_bits Set to number of divider bits (8 or 16)
* Return: mux value (0-4, or -1 if not found)
*/
int get_periph_clock_source(enum periph_id periph_id,
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
int mux, err;
err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
assert(!err);
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
if (clock_source[type][mux] == parent)
return mux;
/* if we get here, either us or the caller has made a mistake */
printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
parent);
return -1;
}
void clock_set_enable(enum periph_id periph_id, int enable)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 *clk;
u32 reg;
/* Enable/disable the clock to this peripheral */
assert(clock_periph_id_isvalid(periph_id));
if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
else
clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
reg = readl(clk);
if (enable)
reg |= PERIPH_MASK(periph_id);
else
reg &= ~PERIPH_MASK(periph_id);
writel(reg, clk);
}
void reset_set_enable(enum periph_id periph_id, int enable)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
u32 *reset;
u32 reg;
/* Enable/disable reset to the peripheral */
assert(clock_periph_id_isvalid(periph_id));
if (periph_id < PERIPH_ID_VW_FIRST)
reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
else
reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
reg = readl(reset);
if (enable)
reg |= PERIPH_MASK(periph_id);
else
reg &= ~PERIPH_MASK(periph_id);
writel(reg, reset);
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
* the same but we are very cautious so we check that a valid clock ID is
* provided.
*
* @param clk_id Clock ID according to tegra30 device tree binding
* Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
*/
enum periph_id clk_id_to_periph_id(int clk_id)
{
if (clk_id > PERIPH_ID_COUNT)
return PERIPH_ID_NONE;
switch (clk_id) {
case PERIPH_ID_RESERVED3:
case PERIPH_ID_RESERVED4:
case PERIPH_ID_RESERVED16:
case PERIPH_ID_RESERVED24:
case PERIPH_ID_RESERVED35:
case PERIPH_ID_RESERVED43:
case PERIPH_ID_RESERVED45:
case PERIPH_ID_RESERVED56:
case PERIPH_ID_PCIEXCLK:
case PERIPH_ID_RESERVED76:
case PERIPH_ID_RESERVED77:
case PERIPH_ID_RESERVED78:
case PERIPH_ID_RESERVED83:
case PERIPH_ID_RESERVED89:
case PERIPH_ID_RESERVED91:
case PERIPH_ID_RESERVED93:
case PERIPH_ID_RESERVED94:
case PERIPH_ID_RESERVED95:
return PERIPH_ID_NONE;
default:
return clk_id;
}
}
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
void clock_early_init(void)
{
tegra30_set_up_pllp();
}
void arch_timer_init(void)
{
}
#define PMC_SATA_PWRGT 0x1ac
#define PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE (1 << 5)
#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1 << 4)
#define PLLE_SS_CNTL 0x68
#define PLLE_SS_CNTL_SSCINCINTRV(x) (((x) & 0x3f) << 24)
#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
#define PLLE_SS_CNTL_SSCBYP (1 << 12)
#define PLLE_SS_CNTL_INTERP_RESET (1 << 11)
#define PLLE_SS_CNTL_BYPASS_SS (1 << 10)
#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
#define PLLE_BASE 0x0e8
#define PLLE_BASE_ENABLE_CML (1 << 31)
#define PLLE_BASE_ENABLE (1 << 30)
#define PLLE_BASE_PLDIV_CML(x) (((x) & 0xf) << 24)
#define PLLE_BASE_PLDIV(x) (((x) & 0x3f) << 16)
#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
#define PLLE_MISC 0x0ec
#define PLLE_MISC_SETUP_BASE(x) (((x) & 0xffff) << 16)
#define PLLE_MISC_PLL_READY (1 << 15)
#define PLLE_MISC_LOCK (1 << 11)
#define PLLE_MISC_LOCK_ENABLE (1 << 9)
#define PLLE_MISC_SETUP_EXT(x) (((x) & 0x3) << 2)
static int tegra_plle_train(void)
{
unsigned int timeout = 2000;
unsigned long value;
value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
value |= PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
value |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
value = readl(NV_PA_PMC_BASE + PMC_SATA_PWRGT);
value &= ~PMC_SATA_PWRGT_PLLE_IDDQ_OVERRIDE;
writel(value, NV_PA_PMC_BASE + PMC_SATA_PWRGT);
do {
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
if (value & PLLE_MISC_PLL_READY)
break;
udelay(100);
} while (--timeout);
if (timeout == 0) {
pr_err("timeout waiting for PLLE to become ready");
return -ETIMEDOUT;
}
return 0;
}
int tegra_plle_enable(void)
{
unsigned int cpcon = 11, p = 18, n = 150, m = 1, timeout = 1000;
u32 value;
int err;
/* disable PLLE clock */
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
value &= ~PLLE_BASE_ENABLE_CML;
value &= ~PLLE_BASE_ENABLE;
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
/* clear lock enable and setup field */
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
value &= ~PLLE_MISC_LOCK_ENABLE;
value &= ~PLLE_MISC_SETUP_BASE(0xffff);
value &= ~PLLE_MISC_SETUP_EXT(0x3);
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
if ((value & PLLE_MISC_PLL_READY) == 0) {
err = tegra_plle_train();
if (err < 0) {
pr_err("failed to train PLLE: %d", err);
return err;
}
}
/* configure PLLE */
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
value &= ~PLLE_BASE_PLDIV_CML(0x0f);
value |= PLLE_BASE_PLDIV_CML(cpcon);
value &= ~PLLE_BASE_PLDIV(0x3f);
value |= PLLE_BASE_PLDIV(p);
value &= ~PLLE_BASE_NDIV(0xff);
value |= PLLE_BASE_NDIV(n);
value &= ~PLLE_BASE_MDIV(0xff);
value |= PLLE_BASE_MDIV(m);
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
value |= PLLE_MISC_SETUP_BASE(0x7);
value |= PLLE_MISC_LOCK_ENABLE;
value |= PLLE_MISC_SETUP_EXT(0);
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
value |= PLLE_SS_CNTL_SSCBYP | PLLE_SS_CNTL_INTERP_RESET |
PLLE_SS_CNTL_BYPASS_SS;
writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
value |= PLLE_BASE_ENABLE_CML | PLLE_BASE_ENABLE;
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
do {
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
if (value & PLLE_MISC_LOCK)
break;
udelay(2);
} while (--timeout);
if (timeout == 0) {
pr_err("timeout waiting for PLLE to lock");
return -ETIMEDOUT;
}
udelay(50);
value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
value &= ~PLLE_SS_CNTL_SSCINCINTRV(0x3f);
value |= PLLE_SS_CNTL_SSCINCINTRV(0x18);
value &= ~PLLE_SS_CNTL_SSCINC(0xff);
value |= PLLE_SS_CNTL_SSCINC(0x01);
value &= ~PLLE_SS_CNTL_SSCBYP;
value &= ~PLLE_SS_CNTL_INTERP_RESET;
value &= ~PLLE_SS_CNTL_BYPASS_SS;
value &= ~PLLE_SS_CNTL_SSCMAX(0x1ff);
value |= PLLE_SS_CNTL_SSCMAX(0x24);
writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
return 0;
}
struct periph_clk_init periph_clk_init_table[] = {
{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
{ PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
{ PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
{ PERIPH_ID_DISP1, CLOCK_ID_CGENERAL },
{ PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH },
{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
{ PERIPH_ID_DVC_I2C, CLOCK_ID_PERIPH },
{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
{ PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
{ -1, },
};