CHANGELOG - platform/external/u-boot - Gitiles

 ======================================================================
 Changes since U-Boot 0.2.1:
 ======================================================================

 * Patch by Stefan Roese, 10 Feb 2003:
   Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)

 * Add dual ethernet support on PM826

 * Add support for LXT971 PHY on PM826

 * Patch by Tord Andersson, 16 Jan 2003:
   Fix flash sector count for TQM8xxL

 * Fix I2C EEPROM problem on ICU862 board (would only write the first
   16 bytes out of each 32 byte block)

 ======================================================================
 Changes for U-Boot 0.2.1:
 ======================================================================

 * Add support for V37 board
   (patch by Jón Benediktsson, 11 Dec 2002)

 * Update baudrate in bd_info when it gets changed

 * Add watchdog trigger points while waiting for serial port
   (so far only 8xx -- needed on LWMON with 100ms watchdog)

 * Improve command line tool to access the U-Boot's environment
   (figuration of the utility, using a config file)

 * Add single quote support for (old) command line parser

 * Switch LWMON board default config from FRAM to EEPROM;
   in POST, EEPROM shows up on 8 addresses

 ======================================================================
 Changes for U-Boot 0.2.0:
 ======================================================================

 * Use 1-byte-read instead of -write for iprobe() function
   Add i2c commands to PM826 config

 * extend I2C POST code: check for list on known addresses

 * Improve log buffer code; use "loglevel" to decide which messages
   to log on the console, too (like in Linux); get rid of "logstart"

 * Add command line tool to access the U-Boot's environment
   (board-specific for TRAB now, to be fixed later)

 * Patch by Hans-Joerg Frieden, 06 Dec 2002
   Fix misc problems with AmigaOne support

 * Patch by Chris Hallinan, 3 Dec 2002:
   minor cleanup to the MPC8245 EPIC driver

 * Patch by Pierre Aubert , 28 Nov 2002
   Add support for external (SIU) interrupts on MPC8xx

 * Patch by Pierre Aubert , 28 Nov 2002
   Fix nested syscalls bug in standalone applications

 * Patch by David Müller, 27 Nov 2002:
   fix output of "pciinfo" command for CardBus bridge devices.

 * Fix bug in TQM8260 board detection - boards got stuck when board ID
   was not readable

 * Add LED indication for IDE activity on KUP4K board

 * Fix startup problems with VFD display on TRAB

 * Patch by Pierre Aubert, 20 Nov 2002
   Add driver for Epson SED13806 graphic controller.
   Add support for BMP logos in cfb_console driver.

 * Added support for both PCMCIA slots (at the same time!) on MPC8xx

 * Patch by Rod Boyce, 21 Nov 2002:
   fix PCMCIA on MBX8xx board

 * Patch by Pierre Aubert , 21 Nov 2002
   Add CFG_CPM_POST_WORD_ADDR to make the offset of the
   bootmode word in DPRAM configurable

 * Patch by Daniel Engström, 18 Nov 2002:
   Fixes for x86 port (mostly strings issues)

 * Patch by Ken Chou, 18 Nov 2002:
   Fix for natsemi NIC cards (DP83815)

 * Patch by Pierre Aubert, 19 Nov 2002:
   fix a bug for the MII configuration, and some warnings

 * Patch by Thomas Frieden, 13 Nov 2002:
   Add code for AmigaOne board
   (preliminary merge to U-Boot, still WIP)

 * Patch by Jon Diekema, 12 Nov 2002:
   - Adding URL for IEEE OUI lookup
   - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
     being defined.
   - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
     root-on-nfs macros are designed to switch how the default boot
     method gets defined.

 * Patch by Daniel Engström, 13 Nov 2002:
   Add support for i386 architecture and AMD SC520 board

 * Patch by Pierre Aubert, 12 Nov 2002:
   Add support for DOS filesystem and booting from DOS floppy disk

 * Patch by Jim Sandoz, 07 Nov 2002:
   Increase number of network RX buffers (PKTBUFSRX in
   "include/net.h") for EEPRO100 based boards (especially SP8240)
   which showed "Receiver is not ready" errors when U-Boot was
   processing the receive buffers slower than the network controller
   was filling them.

 * Patch by Andreas Oberritter, 09 Nov 2002:
   Change behaviour of NetLoop(): return -1 for errors, filesize
   otherwise; return code 0 is valid an means no file loaded - in this
   case the environment still gets updated!

 * Patches by Jon Diekema, 9 Nov 2002:
   - improve ADC/DAC clocking on the SACSng board to align
     the failing edges of LRCLK and SCLK
   - sbc8260 configuration tweaks
   - add status LED support for 82xx systems
   - wire sspi/sspo commands into command handler; improved error
     handlering
   - add timestamp support and alternate memory test to the
     SACSng configuration

 * Patch by Vince Husovsky, 7 Nov 2002:
   Add "-n" to linker options to get rid of "Not enough room for
   program headers" problem

 * Patch by David Müller, 05 Nov 2002
   Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
   so we can use an already existing name

 * Patch by Pierre Aubert, 05 Nov 2002
   Hardware relatied improvments in FDC boot code

 * Patch by Holger Schurig, 5 Nov 2002:
   Make the PXA really change it's frequency

 * Patch by Pierre Aubert, 05 Nov 2002
   Add support for slave serial Spartan 2 FPGAs

 * Fix uninitialized memory (MAC  address)  in  8xx  SCC/FEC  ethernet
   drivers

 * Add support for log buffer which can be passed to Linux kernel's
   syslog mechanism; used especially for POST results.

 * Patch by Klaus Heydeck, 31 Oct 2002:
   Add initial support for kup4k board

 * Patch by Robert Schwebel, 04 Nov 2002:
   - use watchdog to reset PXA250 systems
   - added progress callbacks to (some of the) ARM code
   - update for Cogent CSB226 board

 * Add support for FPS860 board

 * Patch by Guillaume Alexandre,, 04 Nov 2002:
   Improve PCI access on 32-bits Compact PCI bus

 * Fix mdelay() on TRAB - this was still the debugging version with
   seconds instead of ms.

 * Patch by Robert Schwebel, 1 Nov 2002:
   XScale related cleanup (affects all ARM boards)

 * Cleanup of names and README.

 ======================================================================
 Notes for U-Boot 0.1.0:
 ======================================================================

 This is the initial version of "Das U-Boot", the Universal Boot Loader.

 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
 For information about the history of the project please see the
 PPCBoot project page at http://sourceforge.net/projects/ppcboot

 ======================================================================
	======================================================================
	Changes since U-Boot 0.2.1:
	======================================================================

	* Patch by Stefan Roese, 10 Feb 2003:
	Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)

	* Add dual ethernet support on PM826

	* Add support for LXT971 PHY on PM826

	* Patch by Tord Andersson, 16 Jan 2003:
	Fix flash sector count for TQM8xxL

	* Fix I2C EEPROM problem on ICU862 board (would only write the first
	16 bytes out of each 32 byte block)

	======================================================================
	Changes for U-Boot 0.2.1:
	======================================================================

	* Add support for V37 board
	(patch by Jón Benediktsson, 11 Dec 2002)

	* Update baudrate in bd_info when it gets changed

	* Add watchdog trigger points while waiting for serial port
	(so far only 8xx -- needed on LWMON with 100ms watchdog)

	* Improve command line tool to access the U-Boot's environment
	(figuration of the utility, using a config file)

	* Add single quote support for (old) command line parser

	* Switch LWMON board default config from FRAM to EEPROM;
	in POST, EEPROM shows up on 8 addresses

	======================================================================
	Changes for U-Boot 0.2.0:
	======================================================================

	* Use 1-byte-read instead of -write for iprobe() function
	Add i2c commands to PM826 config

	* extend I2C POST code: check for list on known addresses

	* Improve log buffer code; use "loglevel" to decide which messages
	to log on the console, too (like in Linux); get rid of "logstart"

	* Add command line tool to access the U-Boot's environment
	(board-specific for TRAB now, to be fixed later)

	* Patch by Hans-Joerg Frieden, 06 Dec 2002
	Fix misc problems with AmigaOne support

	* Patch by Chris Hallinan, 3 Dec 2002:
	minor cleanup to the MPC8245 EPIC driver

	* Patch by Pierre Aubert , 28 Nov 2002
	Add support for external (SIU) interrupts on MPC8xx

	* Patch by Pierre Aubert , 28 Nov 2002
	Fix nested syscalls bug in standalone applications

	* Patch by David Müller, 27 Nov 2002:
	fix output of "pciinfo" command for CardBus bridge devices.

	* Fix bug in TQM8260 board detection - boards got stuck when board ID
	was not readable

	* Add LED indication for IDE activity on KUP4K board

	* Fix startup problems with VFD display on TRAB

	* Patch by Pierre Aubert, 20 Nov 2002
	Add driver for Epson SED13806 graphic controller.
	Add support for BMP logos in cfb_console driver.

	* Added support for both PCMCIA slots (at the same time!) on MPC8xx

	* Patch by Rod Boyce, 21 Nov 2002:
	fix PCMCIA on MBX8xx board

	* Patch by Pierre Aubert , 21 Nov 2002
	Add CFG_CPM_POST_WORD_ADDR to make the offset of the
	bootmode word in DPRAM configurable

	* Patch by Daniel Engström, 18 Nov 2002:
	Fixes for x86 port (mostly strings issues)

	* Patch by Ken Chou, 18 Nov 2002:
	Fix for natsemi NIC cards (DP83815)

	* Patch by Pierre Aubert, 19 Nov 2002:
	fix a bug for the MII configuration, and some warnings

	* Patch by Thomas Frieden, 13 Nov 2002:
	Add code for AmigaOne board
	(preliminary merge to U-Boot, still WIP)

	* Patch by Jon Diekema, 12 Nov 2002:
	- Adding URL for IEEE OUI lookup
	- Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
	being defined.
	- In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
	root-on-nfs macros are designed to switch how the default boot
	method gets defined.

	* Patch by Daniel Engström, 13 Nov 2002:
	Add support for i386 architecture and AMD SC520 board

	* Patch by Pierre Aubert, 12 Nov 2002:
	Add support for DOS filesystem and booting from DOS floppy disk

	* Patch by Jim Sandoz, 07 Nov 2002:
	Increase number of network RX buffers (PKTBUFSRX in
	"include/net.h") for EEPRO100 based boards (especially SP8240)
	which showed "Receiver is not ready" errors when U-Boot was
	processing the receive buffers slower than the network controller
	was filling them.

	* Patch by Andreas Oberritter, 09 Nov 2002:
	Change behaviour of NetLoop(): return -1 for errors, filesize
	otherwise; return code 0 is valid an means no file loaded - in this
	case the environment still gets updated!

	* Patches by Jon Diekema, 9 Nov 2002:
	- improve ADC/DAC clocking on the SACSng board to align
	the failing edges of LRCLK and SCLK
	- sbc8260 configuration tweaks
	- add status LED support for 82xx systems
	- wire sspi/sspo commands into command handler; improved error
	handlering
	- add timestamp support and alternate memory test to the
	SACSng configuration

	* Patch by Vince Husovsky, 7 Nov 2002:
	Add "-n" to linker options to get rid of "Not enough room for
	program headers" problem

	* Patch by David Müller, 05 Nov 2002
	Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
	so we can use an already existing name

	* Patch by Pierre Aubert, 05 Nov 2002
	Hardware relatied improvments in FDC boot code

	* Patch by Holger Schurig, 5 Nov 2002:
	Make the PXA really change it's frequency

	* Patch by Pierre Aubert, 05 Nov 2002
	Add support for slave serial Spartan 2 FPGAs

	* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
	drivers

	* Add support for log buffer which can be passed to Linux kernel's
	syslog mechanism; used especially for POST results.

	* Patch by Klaus Heydeck, 31 Oct 2002:
	Add initial support for kup4k board

	* Patch by Robert Schwebel, 04 Nov 2002:
	- use watchdog to reset PXA250 systems
	- added progress callbacks to (some of the) ARM code
	- update for Cogent CSB226 board

	* Add support for FPS860 board

	* Patch by Guillaume Alexandre,, 04 Nov 2002:
	Improve PCI access on 32-bits Compact PCI bus

	* Fix mdelay() on TRAB - this was still the debugging version with
	seconds instead of ms.

	* Patch by Robert Schwebel, 1 Nov 2002:
	XScale related cleanup (affects all ARM boards)

	* Cleanup of names and README.

	======================================================================
	Notes for U-Boot 0.1.0:
	======================================================================

	This is the initial version of "Das U-Boot", the Universal Boot Loader.

	It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
	For information about the history of the project please see the
	PPCBoot project page at http://sourceforge.net/projects/ppcboot

	======================================================================