| #include <dt-bindings/clock/tegra20-car.h> |
| #include <dt-bindings/gpio/tegra-gpio.h> |
| #include <dt-bindings/pinctrl/pinctrl-tegra.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "nvidia,tegra20"; |
| interrupt-parent = <&lic>; |
| |
| host1x@50000000 { |
| compatible = "nvidia,tegra20-host1x", "simple-bus"; |
| reg = <0x50000000 0x00024000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ |
| clocks = <&tegra_car TEGRA20_CLK_HOST1X>; |
| resets = <&tegra_car 28>; |
| reset-names = "host1x"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ranges = <0x54000000 0x54000000 0x04000000>; |
| |
| mpe@54040000 { |
| compatible = "nvidia,tegra20-mpe"; |
| reg = <0x54040000 0x00040000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_MPE>; |
| resets = <&tegra_car 60>; |
| reset-names = "mpe"; |
| }; |
| |
| vi@54080000 { |
| compatible = "nvidia,tegra20-vi"; |
| reg = <0x54080000 0x00040000>; |
| interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_VI>; |
| resets = <&tegra_car 20>; |
| reset-names = "vi"; |
| }; |
| |
| epp@540c0000 { |
| compatible = "nvidia,tegra20-epp"; |
| reg = <0x540c0000 0x00040000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_EPP>; |
| resets = <&tegra_car 19>; |
| reset-names = "epp"; |
| }; |
| |
| isp@54100000 { |
| compatible = "nvidia,tegra20-isp"; |
| reg = <0x54100000 0x00040000>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_ISP>; |
| resets = <&tegra_car 23>; |
| reset-names = "isp"; |
| }; |
| |
| gr2d@54140000 { |
| compatible = "nvidia,tegra20-gr2d"; |
| reg = <0x54140000 0x00040000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_GR2D>; |
| resets = <&tegra_car 21>; |
| reset-names = "2d"; |
| }; |
| |
| gr3d@54180000 { |
| compatible = "nvidia,tegra20-gr3d"; |
| reg = <0x54180000 0x00040000>; |
| clocks = <&tegra_car TEGRA20_CLK_GR3D>; |
| resets = <&tegra_car 24>; |
| reset-names = "3d"; |
| }; |
| |
| dc@54200000 { |
| compatible = "nvidia,tegra20-dc"; |
| reg = <0x54200000 0x00040000>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_DISP1>, |
| <&tegra_car TEGRA20_CLK_PLL_P>; |
| clock-names = "dc", "parent"; |
| resets = <&tegra_car 27>; |
| reset-names = "dc"; |
| |
| nvidia,head = <0>; |
| |
| rgb { |
| status = "disabled"; |
| }; |
| }; |
| |
| dc@54240000 { |
| compatible = "nvidia,tegra20-dc"; |
| reg = <0x54240000 0x00040000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_DISP2>, |
| <&tegra_car TEGRA20_CLK_PLL_P>; |
| clock-names = "dc", "parent"; |
| resets = <&tegra_car 26>; |
| reset-names = "dc"; |
| |
| nvidia,head = <1>; |
| |
| rgb { |
| status = "disabled"; |
| }; |
| }; |
| |
| hdmi@54280000 { |
| compatible = "nvidia,tegra20-hdmi"; |
| reg = <0x54280000 0x00040000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_HDMI>, |
| <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; |
| clock-names = "hdmi", "parent"; |
| resets = <&tegra_car 51>; |
| reset-names = "hdmi"; |
| status = "disabled"; |
| }; |
| |
| tvo@542c0000 { |
| compatible = "nvidia,tegra20-tvo"; |
| reg = <0x542c0000 0x00040000>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_TVO>; |
| status = "disabled"; |
| }; |
| |
| dsi@54300000 { |
| compatible = "nvidia,tegra20-dsi"; |
| reg = <0x54300000 0x00040000>; |
| clocks = <&tegra_car TEGRA20_CLK_DSI>; |
| resets = <&tegra_car 48>; |
| reset-names = "dsi"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timer@50040600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| interrupt-parent = <&intc>; |
| reg = <0x50040600 0x20>; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| clocks = <&tegra_car TEGRA20_CLK_TWD>; |
| }; |
| |
| intc: interrupt-controller@50041000 { |
| compatible = "arm,cortex-a9-gic"; |
| reg = <0x50041000 0x1000 |
| 0x50040100 0x0100>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| cache-controller@50043000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x50043000 0x1000>; |
| arm,data-latency = <5 5 2>; |
| arm,tag-latency = <4 4 2>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| lic: interrupt-controller@60004000 { |
| compatible = "nvidia,tegra20-ictlr"; |
| reg = <0x60004000 0x100>, |
| <0x60004100 0x50>, |
| <0x60004200 0x50>, |
| <0x60004300 0x50>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| timer@60005000 { |
| compatible = "nvidia,tegra20-timer"; |
| reg = <0x60005000 0x60>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_TIMER>; |
| }; |
| |
| tegra_car: clock@60006000 { |
| compatible = "nvidia,tegra20-car"; |
| reg = <0x60006000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| flow-controller@60007000 { |
| compatible = "nvidia,tegra20-flowctrl"; |
| reg = <0x60007000 0x1000>; |
| }; |
| |
| apbdma: dma@6000a000 { |
| compatible = "nvidia,tegra20-apbdma"; |
| reg = <0x6000a000 0x1200>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_APBDMA>; |
| resets = <&tegra_car 34>; |
| reset-names = "dma"; |
| #dma-cells = <1>; |
| }; |
| |
| ahb@6000c000 { |
| compatible = "nvidia,tegra20-ahb"; |
| reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */ |
| }; |
| |
| gpio: gpio@6000d000 { |
| compatible = "nvidia,tegra20-gpio"; |
| reg = <0x6000d000 0x1000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| /* |
| gpio-ranges = <&pinmux 0 0 224>; |
| */ |
| }; |
| |
| apbmisc@70000800 { |
| compatible = "nvidia,tegra20-apbmisc"; |
| reg = <0x70000800 0x64 /* Chip revision */ |
| 0x70000008 0x04>; /* Strapping options */ |
| }; |
| |
| pinmux: pinmux@70000014 { |
| compatible = "nvidia,tegra20-pinmux"; |
| reg = <0x70000014 0x10 /* Tri-state registers */ |
| 0x70000080 0x20 /* Mux registers */ |
| 0x700000a0 0x14 /* Pull-up/down registers */ |
| 0x70000868 0xa8>; /* Pad control registers */ |
| }; |
| |
| das@70000c00 { |
| compatible = "nvidia,tegra20-das"; |
| reg = <0x70000c00 0x80>; |
| }; |
| |
| tegra_ac97: ac97@70002000 { |
| compatible = "nvidia,tegra20-ac97"; |
| reg = <0x70002000 0x200>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_AC97>; |
| resets = <&tegra_car 3>; |
| reset-names = "ac97"; |
| dmas = <&apbdma 12>, <&apbdma 12>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| tegra_i2s1: i2s@70002800 { |
| compatible = "nvidia,tegra20-i2s"; |
| reg = <0x70002800 0x200>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_I2S1>; |
| resets = <&tegra_car 11>; |
| reset-names = "i2s"; |
| dmas = <&apbdma 2>, <&apbdma 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| tegra_i2s2: i2s@70002a00 { |
| compatible = "nvidia,tegra20-i2s"; |
| reg = <0x70002a00 0x200>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_I2S2>; |
| resets = <&tegra_car 18>; |
| reset-names = "i2s"; |
| dmas = <&apbdma 1>, <&apbdma 1>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| /* |
| * There are two serial driver i.e. 8250 based simple serial |
| * driver and APB DMA based serial driver for higher baudrate |
| * and performace. To enable the 8250 based driver, the compatible |
| * is "nvidia,tegra20-uart" and to enable the APB DMA based serial |
| * driver, the comptible is "nvidia,tegra20-hsuart". |
| */ |
| uarta: serial@70006000 { |
| compatible = "nvidia,tegra20-uart"; |
| reg = <0x70006000 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_UARTA>; |
| resets = <&tegra_car 6>; |
| reset-names = "serial"; |
| dmas = <&apbdma 8>, <&apbdma 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uartb: serial@70006040 { |
| compatible = "nvidia,tegra20-uart"; |
| reg = <0x70006040 0x40>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_UARTB>; |
| resets = <&tegra_car 7>; |
| reset-names = "serial"; |
| dmas = <&apbdma 9>, <&apbdma 9>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uartc: serial@70006200 { |
| compatible = "nvidia,tegra20-uart"; |
| reg = <0x70006200 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_UARTC>; |
| resets = <&tegra_car 55>; |
| reset-names = "serial"; |
| dmas = <&apbdma 10>, <&apbdma 10>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uartd: serial@70006300 { |
| compatible = "nvidia,tegra20-uart"; |
| reg = <0x70006300 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_UARTD>; |
| resets = <&tegra_car 65>; |
| reset-names = "serial"; |
| dmas = <&apbdma 19>, <&apbdma 19>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| uarte: serial@70006400 { |
| compatible = "nvidia,tegra20-uart"; |
| reg = <0x70006400 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_UARTE>; |
| resets = <&tegra_car 66>; |
| reset-names = "serial"; |
| dmas = <&apbdma 20>, <&apbdma 20>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| nand: nand-controller@70008000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "nvidia,tegra20-nand"; |
| reg = <0x70008000 0x100>; |
| }; |
| |
| pwm: pwm@7000a000 { |
| compatible = "nvidia,tegra20-pwm"; |
| reg = <0x7000a000 0x100>; |
| #pwm-cells = <2>; |
| clocks = <&tegra_car TEGRA20_CLK_PWM>; |
| resets = <&tegra_car 17>; |
| reset-names = "pwm"; |
| status = "disabled"; |
| }; |
| |
| rtc@7000e000 { |
| compatible = "nvidia,tegra20-rtc"; |
| reg = <0x7000e000 0x100>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_RTC>; |
| }; |
| |
| i2c@7000c000 { |
| compatible = "nvidia,tegra20-i2c"; |
| reg = <0x7000c000 0x100>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_I2C1>, |
| <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; |
| clock-names = "div-clk", "fast-clk"; |
| resets = <&tegra_car 12>; |
| reset-names = "i2c"; |
| dmas = <&apbdma 21>, <&apbdma 21>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| spi@7000c380 { |
| compatible = "nvidia,tegra20-sflash"; |
| reg = <0x7000c380 0x80>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_SPI>; |
| resets = <&tegra_car 43>; |
| reset-names = "spi"; |
| dmas = <&apbdma 11>, <&apbdma 11>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c@7000c400 { |
| compatible = "nvidia,tegra20-i2c"; |
| reg = <0x7000c400 0x100>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_I2C2>, |
| <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; |
| clock-names = "div-clk", "fast-clk"; |
| resets = <&tegra_car 54>; |
| reset-names = "i2c"; |
| dmas = <&apbdma 22>, <&apbdma 22>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c@7000c500 { |
| compatible = "nvidia,tegra20-i2c"; |
| reg = <0x7000c500 0x100>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_I2C3>, |
| <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; |
| clock-names = "div-clk", "fast-clk"; |
| resets = <&tegra_car 67>; |
| reset-names = "i2c"; |
| dmas = <&apbdma 23>, <&apbdma 23>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| i2c@7000d000 { |
| compatible = "nvidia,tegra20-i2c-dvc"; |
| reg = <0x7000d000 0x200>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_DVC>, |
| <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; |
| clock-names = "div-clk", "fast-clk"; |
| resets = <&tegra_car 47>; |
| reset-names = "i2c"; |
| dmas = <&apbdma 24>, <&apbdma 24>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| spi@7000d400 { |
| compatible = "nvidia,tegra20-slink"; |
| reg = <0x7000d400 0x200>; |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_SBC1>; |
| resets = <&tegra_car 41>; |
| reset-names = "spi"; |
| dmas = <&apbdma 15>, <&apbdma 15>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| spi@7000d600 { |
| compatible = "nvidia,tegra20-slink"; |
| reg = <0x7000d600 0x200>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_SBC2>; |
| resets = <&tegra_car 44>; |
| reset-names = "spi"; |
| dmas = <&apbdma 16>, <&apbdma 16>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| spi@7000d800 { |
| compatible = "nvidia,tegra20-slink"; |
| reg = <0x7000d800 0x200>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_SBC3>; |
| resets = <&tegra_car 46>; |
| reset-names = "spi"; |
| dmas = <&apbdma 17>, <&apbdma 17>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| spi@7000da00 { |
| compatible = "nvidia,tegra20-slink"; |
| reg = <0x7000da00 0x200>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&tegra_car TEGRA20_CLK_SBC4>; |
| resets = <&tegra_car 68>; |
| reset-names = "spi"; |
| dmas = <&apbdma 18>, <&apbdma 18>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| kbc@7000e200 { |
| compatible = "nvidia,tegra20-kbc"; |
| reg = <0x7000e200 0x100>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_KBC>; |
| resets = <&tegra_car 36>; |
| reset-names = "kbc"; |
| status = "disabled"; |
| }; |
| |
| pmc@7000e400 { |
| compatible = "nvidia,tegra20-pmc"; |
| reg = <0x7000e400 0x400>; |
| clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; |
| clock-names = "pclk", "clk32k_in"; |
| }; |
| |
| memory-controller@7000f000 { |
| compatible = "nvidia,tegra20-mc"; |
| reg = <0x7000f000 0x024 |
| 0x7000f03c 0x3c4>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| iommu@7000f024 { |
| compatible = "nvidia,tegra20-gart"; |
| reg = <0x7000f024 0x00000018 /* controller registers */ |
| 0x58000000 0x02000000>; /* GART aperture */ |
| }; |
| |
| memory-controller@7000f400 { |
| compatible = "nvidia,tegra20-emc"; |
| reg = <0x7000f400 0x200>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| fuse@7000f800 { |
| compatible = "nvidia,tegra20-efuse"; |
| reg = <0x7000f800 0x400>; |
| clocks = <&tegra_car TEGRA20_CLK_FUSE>; |
| clock-names = "fuse"; |
| resets = <&tegra_car 39>; |
| reset-names = "fuse"; |
| }; |
| |
| pcie-controller@80003000 { |
| compatible = "nvidia,tegra20-pcie"; |
| device_type = "pci"; |
| reg = <0x80003000 0x00000800 /* PADS registers */ |
| 0x80003800 0x00000200 /* AFI registers */ |
| 0x90000000 0x10000000>; /* configuration space */ |
| reg-names = "pads", "afi", "cs"; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */ |
| GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ |
| interrupt-names = "intr", "msi"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| |
| bus-range = <0x00 0xff>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ |
| 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ |
| 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ |
| 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */ |
| 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */ |
| |
| clocks = <&tegra_car TEGRA20_CLK_PEX>, |
| <&tegra_car TEGRA20_CLK_AFI>, |
| <&tegra_car TEGRA20_CLK_PLL_E>; |
| clock-names = "pex", "afi", "pll_e"; |
| resets = <&tegra_car 70>, |
| <&tegra_car 72>, |
| <&tegra_car 74>; |
| reset-names = "pex", "afi", "pcie_x"; |
| status = "disabled"; |
| |
| pci@1,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; |
| reg = <0x000800 0 0 0 0>; |
| status = "disabled"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| |
| nvidia,num-lanes = <2>; |
| }; |
| |
| pci@2,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; |
| reg = <0x001000 0 0 0 0>; |
| status = "disabled"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| |
| nvidia,num-lanes = <2>; |
| }; |
| }; |
| |
| usb@c5000000 { |
| compatible = "nvidia,tegra20-ehci", "usb-ehci"; |
| reg = <0xc5000000 0x4000>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| phy_type = "utmi"; |
| nvidia,has-legacy-mode; |
| clocks = <&tegra_car TEGRA20_CLK_USBD>; |
| resets = <&tegra_car 22>; |
| reset-names = "usb"; |
| nvidia,needs-double-reset; |
| nvidia,phy = <&phy1>; |
| status = "disabled"; |
| }; |
| |
| phy1: usb-phy@c5000000 { |
| compatible = "nvidia,tegra20-usb-phy"; |
| reg = <0xc5000000 0x4000 0xc5000000 0x4000>; |
| phy_type = "utmi"; |
| clocks = <&tegra_car TEGRA20_CLK_USBD>, |
| <&tegra_car TEGRA20_CLK_PLL_U>, |
| <&tegra_car TEGRA20_CLK_CLK_M>, |
| <&tegra_car TEGRA20_CLK_USBD>; |
| clock-names = "reg", "pll_u", "timer", "utmi-pads"; |
| resets = <&tegra_car 22>, <&tegra_car 22>; |
| reset-names = "usb", "utmi-pads"; |
| nvidia,has-legacy-mode; |
| nvidia,hssync-start-delay = <9>; |
| nvidia,idle-wait-delay = <17>; |
| nvidia,elastic-limit = <16>; |
| nvidia,term-range-adj = <6>; |
| nvidia,xcvr-setup = <9>; |
| nvidia,xcvr-lsfslew = <1>; |
| nvidia,xcvr-lsrslew = <1>; |
| nvidia,has-utmi-pad-registers; |
| status = "disabled"; |
| }; |
| |
| usb@c5004000 { |
| compatible = "nvidia,tegra20-ehci", "usb-ehci"; |
| reg = <0xc5004000 0x4000>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| phy_type = "ulpi"; |
| clocks = <&tegra_car TEGRA20_CLK_USB2>; |
| resets = <&tegra_car 58>; |
| reset-names = "usb"; |
| nvidia,phy = <&phy2>; |
| status = "disabled"; |
| }; |
| |
| phy2: usb-phy@c5004000 { |
| compatible = "nvidia,tegra20-usb-phy"; |
| reg = <0xc5004000 0x4000>; |
| phy_type = "ulpi"; |
| clocks = <&tegra_car TEGRA20_CLK_USB2>, |
| <&tegra_car TEGRA20_CLK_PLL_U>, |
| <&tegra_car TEGRA20_CLK_CDEV2>; |
| clock-names = "reg", "pll_u", "ulpi-link"; |
| resets = <&tegra_car 58>, <&tegra_car 22>; |
| reset-names = "usb", "utmi-pads"; |
| status = "disabled"; |
| }; |
| |
| usb@c5008000 { |
| compatible = "nvidia,tegra20-ehci", "usb-ehci"; |
| reg = <0xc5008000 0x4000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| phy_type = "utmi"; |
| clocks = <&tegra_car TEGRA20_CLK_USB3>; |
| resets = <&tegra_car 59>; |
| reset-names = "usb"; |
| nvidia,phy = <&phy3>; |
| status = "disabled"; |
| }; |
| |
| phy3: usb-phy@c5008000 { |
| compatible = "nvidia,tegra20-usb-phy"; |
| reg = <0xc5008000 0x4000 0xc5000000 0x4000>; |
| phy_type = "utmi"; |
| clocks = <&tegra_car TEGRA20_CLK_USB3>, |
| <&tegra_car TEGRA20_CLK_PLL_U>, |
| <&tegra_car TEGRA20_CLK_CLK_M>, |
| <&tegra_car TEGRA20_CLK_USBD>; |
| clock-names = "reg", "pll_u", "timer", "utmi-pads"; |
| resets = <&tegra_car 59>, <&tegra_car 22>; |
| reset-names = "usb", "utmi-pads"; |
| nvidia,hssync-start-delay = <9>; |
| nvidia,idle-wait-delay = <17>; |
| nvidia,elastic-limit = <16>; |
| nvidia,term-range-adj = <6>; |
| nvidia,xcvr-setup = <9>; |
| nvidia,xcvr-lsfslew = <2>; |
| nvidia,xcvr-lsrslew = <2>; |
| status = "disabled"; |
| }; |
| |
| sdhci@c8000000 { |
| compatible = "nvidia,tegra20-sdhci"; |
| reg = <0xc8000000 0x200>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; |
| resets = <&tegra_car 14>; |
| reset-names = "sdhci"; |
| status = "disabled"; |
| }; |
| |
| sdhci@c8000200 { |
| compatible = "nvidia,tegra20-sdhci"; |
| reg = <0xc8000200 0x200>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_SDMMC2>; |
| resets = <&tegra_car 9>; |
| reset-names = "sdhci"; |
| status = "disabled"; |
| }; |
| |
| sdhci@c8000400 { |
| compatible = "nvidia,tegra20-sdhci"; |
| reg = <0xc8000400 0x200>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_SDMMC3>; |
| resets = <&tegra_car 69>; |
| reset-names = "sdhci"; |
| status = "disabled"; |
| }; |
| |
| sdhci@c8000600 { |
| compatible = "nvidia,tegra20-sdhci"; |
| reg = <0xc8000600 0x200>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&tegra_car TEGRA20_CLK_SDMMC4>; |
| resets = <&tegra_car 15>; |
| reset-names = "sdhci"; |
| status = "disabled"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <1>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |