| /* |
| * (C) Copyright 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * Boot support |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <s_record.h> |
| #include <jffs2/load_kernel.h> |
| #include <net.h> |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) |
| static int part_num=0; |
| |
| #ifndef CFG_JFFS_CUSTOM_PART |
| |
| static struct part_info part; |
| |
| struct part_info* |
| jffs2_part_info(int part_num) |
| { |
| extern flash_info_t flash_info[]; /* info for FLASH chips */ |
| int i; |
| |
| if(part_num==0){ |
| |
| if(part.usr_priv==(void*)1) |
| return ∂ |
| |
| memset(&part, 0, sizeof(part)); |
| |
| #if defined(CFG_JFFS2_FIRST_SECTOR) |
| part.offset = (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR]; |
| #else |
| part.offset = (unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[0]; |
| #endif |
| |
| /* Figure out flash partition size */ |
| for (i = CFG_JFFS2_FIRST_BANK; i < CFG_JFFS2_NUM_BANKS+CFG_JFFS2_FIRST_BANK; i++) |
| part.size += flash_info[i].size; |
| |
| #if defined(CFG_JFFS2_FIRST_SECTOR) && (CFG_JFFS2_FIRST_SECTOR > 0) |
| part.size -= |
| flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR] - |
| flash_info[CFG_JFFS2_FIRST_BANK].start[0]; |
| #endif |
| |
| /* unused in current jffs2 loader */ |
| part.erasesize = 0; |
| |
| /* Mark the struct as ready */ |
| part.usr_priv=(void*)1; |
| |
| return ∂ |
| } |
| return 0; |
| } |
| #endif /* ifndef CFG_JFFS_CUSTOM_PART */ |
| int |
| do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| struct part_info* jffs2_part_info(int); |
| int jffs2_1pass_load(char *, struct part_info *,const char *); |
| |
| char *filename = "uImage"; |
| ulong offset = CFG_LOAD_ADDR; |
| int size; |
| struct part_info *part; |
| |
| if (argc == 2) { |
| filename = argv[1]; |
| } |
| if (argc == 3) { |
| offset = simple_strtoul(argv[1], NULL, 16); |
| filename = argv[2]; |
| } |
| |
| if (0 != (part=jffs2_part_info(part_num))){ |
| |
| printf("### JFFS2 loading '%s' to 0x%lx\n", filename, offset); |
| size = jffs2_1pass_load((char *)offset, part, filename); |
| |
| if (size > 0) { |
| char buf[10]; |
| printf("### JFFS2 load complete: %d bytes loaded to 0x%lx\n", |
| size, offset); |
| sprintf(buf, "%x", size); |
| setenv("filesize", buf); |
| } else { |
| printf("### JFFS2 LOAD ERROR<%x> for %s!\n", size, filename); |
| } |
| |
| return !(size > 0); |
| } |
| printf("Active partition not valid\n"); |
| return 0; |
| } |
| |
| int |
| do_jffs2_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| struct part_info* jffs2_part_info(int); |
| int jffs2_1pass_ls(struct part_info *,char *); |
| |
| char *filename = "/"; |
| int ret; |
| struct part_info *part; |
| |
| if (argc == 2) |
| filename = argv[1]; |
| |
| if (0 != (part=jffs2_part_info(part_num))){ |
| |
| ret = jffs2_1pass_ls(jffs2_part_info(part_num), filename); |
| |
| return (ret == 1); |
| } |
| printf("Active partition not valid\n"); |
| return 0; |
| } |
| |
| int |
| do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| struct part_info* jffs2_part_info(int); |
| int jffs2_1pass_info(struct part_info *); |
| |
| int ret; |
| struct part_info *part; |
| |
| if (0 != (part=jffs2_part_info(part_num))){ |
| |
| ret = jffs2_1pass_info(jffs2_part_info(part_num)); |
| |
| return (ret == 1); |
| } |
| printf("Active partition not valid\n"); |
| return 0; |
| } |
| |
| int |
| do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| int tmp_part; |
| struct part_info* jffs2_part_info(int); |
| |
| if (argc >= 2) { |
| tmp_part = simple_strtoul(argv[1], NULL, 16); |
| }else{ |
| printf("Need partition number in argument list\n"); |
| return 0; |
| |
| } |
| |
| if (jffs2_part_info(tmp_part)){ |
| printf("Partiton changed to %d\n",tmp_part); |
| part_num=tmp_part; |
| return 0; |
| } |
| |
| printf("Partition %d is not valid partiton\n",tmp_part); |
| return 0; |
| |
| } |
| |
| /***************************************************/ |
| |
| cmd_tbl_t U_BOOT_CMD(JFFS2_FSLOAD) = MK_CMD_ENTRY( |
| "fsload", 3, 0, do_jffs2_fsload, |
| "fsload - load binary file from a filesystem image\n", |
| "[ off ] [ filename ]\n" |
| " - load binary file from flash bank\n" |
| " with offset 'off'\n" |
| ); |
| |
| cmd_tbl_t U_BOOT_CMD(JFFS2_FSINFO) = MK_CMD_ENTRY( |
| "fsinfo", 1, 1, do_jffs2_fsinfo, |
| "fsinfo - print information about filesystems\n", |
| " - print information about filesystems\n" |
| ); |
| |
| cmd_tbl_t U_BOOT_CMD(JFFS2_LS) = MK_CMD_ENTRY( |
| "ls", 2, 1, do_jffs2_ls, |
| "ls - list files in a directory (default /)\n", |
| "[ directory ]\n" |
| " - list files in a directory.\n" |
| ); |
| |
| cmd_tbl_t U_BOOT_CMD(JFFS2_CHPART) = MK_CMD_ENTRY( |
| "chpart", 2, 0, do_jffs2_chpart, |
| "chpart - change active partition\n", |
| " - change active partition\n" |
| ); |
| |
| #endif /* CFG_CMD_JFFS2 */ |