| /* |
| * From Coreboot file of same name |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * 2012 secunet Security Networks AG |
| * |
| * SPDX-License-Identifier: GPL-2.0 |
| */ |
| |
| #ifndef _ASM_SPEEDSTEP_H |
| #define _ASM_SPEEDSTEP_H |
| |
| /* Magic value used to locate speedstep configuration in the device tree */ |
| #define SPEEDSTEP_APIC_MAGIC 0xACAC |
| |
| /* MWAIT coordination I/O base address. This must match |
| * the \_PR_.CPU0 PM base address. |
| */ |
| #define PMB0_BASE 0x510 |
| |
| /* PMB1: I/O port that triggers SMI once cores are in the same state. |
| * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4] |
| */ |
| #define PMB1_BASE 0x800 |
| |
| struct sst_state { |
| uint8_t dynfsb:1; /* whether this is SLFM */ |
| uint8_t nonint:1; /* add .5 to ratio */ |
| uint8_t ratio:6; |
| uint8_t vid; |
| uint8_t is_turbo; |
| uint8_t is_slfm; |
| uint32_t power; |
| }; |
| #define SPEEDSTEP_RATIO_SHIFT 8 |
| #define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT) |
| #define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT) |
| #define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT) |
| #define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT) |
| #define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT) |
| #define SPEEDSTEP_VID_MASK 0x3f |
| #define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \ |
| 0, /* dynfsb won't be read. */ \ |
| ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \ |
| (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \ |
| >> SPEEDSTEP_RATIO_SHIFT), \ |
| (val & mask) & SPEEDSTEP_VID_MASK, \ |
| 0, /* not turbo by default */ \ |
| 0, /* not slfm by default */ \ |
| 0 /* power is hardcoded in software. */ \ |
| }) |
| #define SPEEDSTEP_ENCODE_STATE(state) ( \ |
| ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \ |
| ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \ |
| ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \ |
| ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK)) |
| #define SPEEDSTEP_DOUBLE_RATIO(state) ( \ |
| ((uint8_t)(state).ratio * 2) + (state).nonint) |
| |
| struct sst_params { |
| struct sst_state slfm; |
| struct sst_state min; |
| struct sst_state max; |
| struct sst_state turbo; |
| }; |
| |
| /* Looking at core2's spec, the highest normal bus ratio for an eist enabled |
| processor is 14, the lowest is always 6. This makes 5 states with the |
| minimal step width of 2. With turbo mode and super LFM we have at most 7. */ |
| #define SPEEDSTEP_MAX_NORMAL_STATES 5 |
| #define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2) |
| struct sst_table { |
| /* Table of p-states for EMTTM and ACPI by decreasing performance. */ |
| struct sst_state states[SPEEDSTEP_MAX_STATES]; |
| int num_states; |
| }; |
| |
| void speedstep_gen_pstates(struct sst_table *); |
| |
| #define SPEEDSTEP_MAX_POWER_YONAH 31000 |
| #define SPEEDSTEP_MIN_POWER_YONAH 13100 |
| #define SPEEDSTEP_MAX_POWER_MEROM 35000 |
| #define SPEEDSTEP_MIN_POWER_MEROM 25000 |
| #define SPEEDSTEP_SLFM_POWER_MEROM 12000 |
| #define SPEEDSTEP_MAX_POWER_PENRYN 35000 |
| #define SPEEDSTEP_MIN_POWER_PENRYN 15000 |
| #define SPEEDSTEP_SLFM_POWER_PENRYN 12000 |
| |
| #endif |