| /* |
| * (C) Copyright 2006 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc5xxx.h> |
| #include <asm/processor.h> |
| |
| #if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) |
| |
| #if 0 |
| #define DEBUGF(x...) printf(x) |
| #else |
| #define DEBUGF(x...) |
| #endif |
| |
| #define swap16(x) __swab16(x) |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /* |
| * CAM5200 is a TQM5200B based board. Additionally it also features |
| * a NIOS cpu. The NIOS CPU peripherals are accessible through MPC5xxx |
| * Local Bus on CS5. This includes 32 bit wide RAM and SRAM as well as |
| * 16 bit wide flash device. Big Endian order on a 32 bit CS5 makes |
| * access to flash chip slightly more complicated as additional byte |
| * swapping is necessary within each 16 bit wide flash 'word'. |
| * |
| * This driver's task is to handle both flash devices: 32 bit TQM5200B |
| * flash chip and 16 bit NIOS cpu flash chip. In the below |
| * flash_addr_table table we use least significant address bit to mark |
| * 16 bit flash bank and two sets of routines *_32 and *_16 to handle |
| * specifics of both flashes. |
| */ |
| static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = { |
| {CONFIG_SYS_BOOTCS_START, CONFIG_SYS_CS5_START | 1} |
| }; |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static int write_word(flash_info_t * info, ulong dest, ulong data); |
| #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV |
| static int write_word_32(flash_info_t * info, ulong dest, ulong data); |
| static int write_word_16(flash_info_t * info, ulong dest, ulong data); |
| static int flash_erase_32(flash_info_t * info, int s_first, int s_last); |
| static int flash_erase_16(flash_info_t * info, int s_first, int s_last); |
| static ulong flash_get_size_32(vu_long * addr, flash_info_t * info); |
| static ulong flash_get_size_16(vu_long * addr, flash_info_t * info); |
| #endif |
| |
| void flash_print_info(flash_info_t * info) |
| { |
| int i, k; |
| int size, erased; |
| volatile unsigned long *flash; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_AMD: |
| printf("AMD "); |
| break; |
| case FLASH_MAN_FUJ: |
| printf("FUJITSU "); |
| break; |
| default: |
| printf("Unknown Vendor "); |
| break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_S29GL128N: |
| printf ("S29GL128N (256 Mbit, uniform sector size)\n"); |
| break; |
| case FLASH_AM320B: |
| printf ("29LV320B (32 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM320T: |
| printf ("29LV320T (32 Mbit, top boot sect)\n"); |
| break; |
| default: |
| printf("Unknown Chip Type\n"); |
| break; |
| } |
| |
| printf(" Size: %ld KB in %d Sectors\n", |
| info->size >> 10, info->sector_count); |
| |
| printf(" Sector Start Addresses:"); |
| for (i = 0; i < info->sector_count; ++i) { |
| /* |
| * Check if whole sector is erased |
| */ |
| if (i != (info->sector_count - 1)) |
| size = info->start[i + 1] - info->start[i]; |
| else |
| size = info->start[0] + info->size - info->start[i]; |
| |
| erased = 1; |
| flash = (volatile unsigned long *)info->start[i]; |
| size = size >> 2; /* divide by 4 for longword access */ |
| |
| for (k = 0; k < size; k++) { |
| if (*flash++ != 0xffffffff) { |
| erased = 0; |
| break; |
| } |
| } |
| |
| if ((i % 5) == 0) |
| printf("\n "); |
| |
| printf(" %08lX%s%s", info->start[i], |
| erased ? " E" : " ", |
| info->protect[i] ? "RO " : " "); |
| } |
| printf("\n"); |
| return; |
| } |
| |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV |
| static ulong flash_get_size(vu_long * addr, flash_info_t * info) |
| { |
| |
| DEBUGF("get_size: FLASH ADDR %08lx\n", addr); |
| |
| /* bit 0 used for big flash marking */ |
| if ((ulong)addr & 0x1) |
| return flash_get_size_16((vu_long *)((ulong)addr & 0xfffffffe), info); |
| else |
| return flash_get_size_32(addr, info); |
| } |
| |
| static ulong flash_get_size_32(vu_long * addr, flash_info_t * info) |
| #else |
| static ulong flash_get_size(vu_long * addr, flash_info_t * info) |
| #endif |
| { |
| short i; |
| CONFIG_SYS_FLASH_WORD_SIZE value; |
| ulong base = (ulong) addr; |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; |
| |
| DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr); |
| |
| /* Write auto select command: read Manufacturer ID */ |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
| addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090; |
| udelay(1000); |
| |
| value = addr2[0]; |
| DEBUGF("FLASH MANUFACT: %x\n", value); |
| |
| switch (value) { |
| case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| value = addr2[1]; /* device ID */ |
| DEBUGF("\nFLASH DEVICEID: %x\n", value); |
| |
| switch (value) { |
| case AMD_ID_MIRROR: |
| DEBUGF("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n", |
| addr[14], addr[15]); |
| switch(addr[14]) { |
| case AMD_ID_GL128N_2: |
| if (addr[15] != AMD_ID_GL128N_3) { |
| DEBUGF("Chip: S29GL128N -> unknown\n"); |
| info->flash_id = FLASH_UNKNOWN; |
| } else { |
| DEBUGF("Chip: S29GL128N\n"); |
| info->flash_id += FLASH_S29GL128N; |
| info->sector_count = 128; |
| info->size = 0x02000000; |
| } |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return(0); |
| } |
| break; |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return (0); /* => no or unknown flash */ |
| } |
| |
| /* set up sector start address table */ |
| for (i = 0; i < info->sector_count; i++) |
| info->start[i] = base + (i * 0x00040000); |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ |
| /* D0 = 1 if protected */ |
| addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); |
| |
| info->protect[i] = addr2[2] & 1; |
| } |
| |
| /* issue bank reset to return to read mode */ |
| addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; |
| |
| return (info->size); |
| } |
| |
| static int wait_for_DQ7_32(flash_info_t * info, int sect) |
| { |
| ulong start, now, last; |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = |
| (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); |
| |
| start = get_timer(0); |
| last = start; |
| while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != |
| (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) { |
| if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf("Timeout\n"); |
| return -1; |
| } |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc('.'); |
| last = now; |
| } |
| } |
| return 0; |
| } |
| |
| #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV |
| int flash_erase(flash_info_t * info, int s_first, int s_last) |
| { |
| if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { |
| return flash_erase_16(info, s_first, s_last); |
| } else { |
| return flash_erase_32(info, s_first, s_last); |
| } |
| } |
| |
| static int flash_erase_32(flash_info_t * info, int s_first, int s_last) |
| #else |
| int flash_erase(flash_info_t * info, int s_first, int s_last) |
| #endif |
| { |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; |
| int flag, prot, sect, l_sect; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) |
| printf("- missing\n"); |
| else |
| printf("- no sectors to erase\n"); |
| return 1; |
| } |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("Can't erase unknown flash type - aborted\n"); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; ++sect) { |
| if (info->protect[sect]) |
| prot++; |
| } |
| |
| if (prot) |
| printf("- Warning: %d protected sectors will not be erased!", prot); |
| |
| printf("\n"); |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); |
| |
| addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
| addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; |
| addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; |
| addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
| addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; |
| addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ |
| |
| l_sect = sect; |
| /* |
| * Wait for each sector to complete, it's more |
| * reliable. According to AMD Spec, you must |
| * issue all erase commands within a specified |
| * timeout. This has been seen to fail, especially |
| * if printf()s are included (for debug)!! |
| */ |
| wait_for_DQ7_32(info, sect); |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay(1000); |
| |
| /* reset to read mode */ |
| addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; |
| addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ |
| |
| printf(" done\n"); |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp, data; |
| int i, l, rc; |
| |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i = 0, cp = wp; i < l; ++i, ++cp) |
| data = (data << 8) | (*(uchar *) cp); |
| |
| for (; i < 4 && cnt > 0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| |
| for (; cnt == 0 && i < 4; ++i, ++cp) |
| data = (data << 8) | (*(uchar *) cp); |
| |
| if ((rc = write_word(info, wp, data)) != 0) |
| return (rc); |
| |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while (cnt >= 4) { |
| data = 0; |
| for (i = 0; i < 4; ++i) |
| data = (data << 8) | *src++; |
| |
| if ((rc = write_word(info, wp, data)) != 0) |
| return (rc); |
| |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if (cnt == 0) |
| return (0); |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i < 4; ++i, ++cp) |
| data = (data << 8) | (*(uchar *) cp); |
| |
| return (write_word(info, wp, data)); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV |
| static int write_word(flash_info_t * info, ulong dest, ulong data) |
| { |
| if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { |
| return write_word_16(info, dest, data); |
| } else { |
| return write_word_32(info, dest, data); |
| } |
| } |
| |
| static int write_word_32(flash_info_t * info, ulong dest, ulong data) |
| #else |
| static int write_word(flash_info_t * info, ulong dest, ulong data) |
| #endif |
| { |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest; |
| ulong *datap = &data; |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = |
| (volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap; |
| ulong start; |
| int i, flag; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*((vu_long *)dest) & data) != data) |
| return (2); |
| |
| for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; |
| addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0; |
| |
| dest2[i] = data2[i]; |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer(0); |
| while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != |
| (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) { |
| |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) |
| return (1); |
| } |
| } |
| |
| return (0); |
| } |
| |
| #ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV |
| |
| #undef CONFIG_SYS_FLASH_WORD_SIZE |
| #define CONFIG_SYS_FLASH_WORD_SIZE unsigned short |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| static ulong flash_get_size_16(vu_long * addr, flash_info_t * info) |
| { |
| short i; |
| CONFIG_SYS_FLASH_WORD_SIZE value; |
| ulong base = (ulong) addr; |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; |
| |
| DEBUGF("get_size16: FLASH ADDR: %08x\n", (unsigned)addr); |
| |
| /* issue bank reset to return to read mode */ |
| addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000; |
| |
| /* Write auto select command: read Manufacturer ID */ |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; |
| addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90009000; |
| udelay(1000); |
| |
| value = swap16(addr2[0]); |
| DEBUGF("FLASH MANUFACT: %x\n", value); |
| |
| switch (value) { |
| case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT: |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| value = swap16(addr2[1]); /* device ID */ |
| DEBUGF("\nFLASH DEVICEID: %x\n", value); |
| |
| switch (value) { |
| case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B: |
| info->flash_id += FLASH_AM320B; |
| info->sector_count = 71; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T: |
| info->flash_id += FLASH_AM320T; |
| info->sector_count = 71; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return (0); /* => no or unknown flash */ |
| } |
| |
| if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00002000; |
| info->start[2] = base + 0x00004000; |
| info->start[3] = base + 0x00006000; |
| info->start[4] = base + 0x00008000; |
| info->start[5] = base + 0x0000a000; |
| info->start[6] = base + 0x0000c000; |
| info->start[7] = base + 0x0000e000; |
| |
| for (i = 8; i < info->sector_count; i++) |
| info->start[i] = base + (i * 0x00010000) - 0x00070000; |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00002000; |
| info->start[i--] = base + info->size - 0x00004000; |
| info->start[i--] = base + info->size - 0x00006000; |
| info->start[i--] = base + info->size - 0x00008000; |
| info->start[i--] = base + info->size - 0x0000a000; |
| info->start[i--] = base + info->size - 0x0000c000; |
| info->start[i--] = base + info->size - 0x0000e000; |
| |
| for (; i >= 0; i--) |
| info->start[i] = base + i * 0x00010000; |
| } |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ |
| /* D0 = 1 if protected */ |
| addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); |
| |
| info->protect[i] = addr2[2] & 1; |
| } |
| |
| /* issue bank reset to return to read mode */ |
| addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000; |
| |
| return (info->size); |
| } |
| |
| static int wait_for_DQ7_16(flash_info_t * info, int sect) |
| { |
| ulong start, now, last; |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = |
| (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); |
| |
| start = get_timer(0); |
| last = start; |
| while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) != |
| (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) { |
| if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf("Timeout\n"); |
| return -1; |
| } |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc('.'); |
| last = now; |
| } |
| } |
| return 0; |
| } |
| |
| static int flash_erase_16(flash_info_t * info, int s_first, int s_last) |
| { |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; |
| int flag, prot, sect, l_sect; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) |
| printf("- missing\n"); |
| else |
| printf("- no sectors to erase\n"); |
| return 1; |
| } |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf("Can't erase unknown flash type - aborted\n"); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; ++sect) { |
| if (info->protect[sect]) |
| prot++; |
| } |
| |
| if (prot) |
| printf("- Warning: %d protected sectors will not be erased!", prot); |
| |
| printf("\n"); |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); |
| |
| addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; |
| addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; |
| addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000; |
| addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; |
| addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; |
| addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30003000; /* sector erase */ |
| |
| l_sect = sect; |
| /* |
| * Wait for each sector to complete, it's more |
| * reliable. According to AMD Spec, you must |
| * issue all erase commands within a specified |
| * timeout. This has been seen to fail, especially |
| * if printf()s are included (for debug)!! |
| */ |
| wait_for_DQ7_16(info, sect); |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay(1000); |
| |
| /* reset to read mode */ |
| addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; |
| addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000; /* reset bank */ |
| |
| printf(" done\n"); |
| return 0; |
| } |
| |
| static int write_word_16(flash_info_t * info, ulong dest, ulong data) |
| { |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest; |
| ulong *datap = &data; |
| volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = |
| (volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap; |
| ulong start; |
| int i; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { |
| if ((dest2[i] & swap16(data2[i])) != swap16(data2[i])) |
| return (2); |
| } |
| |
| for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { |
| int flag; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; |
| addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; |
| addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA000A000; |
| |
| dest2[i] = swap16(data2[i]); |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer(0); |
| while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) != |
| (swap16(data2[i]) & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000)) { |
| |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| return (1); |
| } |
| } |
| } |
| |
| return (0); |
| } |
| #endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */ |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| static ulong flash_get_size(vu_long * addr, flash_info_t * info); |
| static int write_word(flash_info_t * info, ulong dest, ulong data); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long flash_init(void) |
| { |
| unsigned long total_b = 0; |
| unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; |
| unsigned short index = 0; |
| int i; |
| |
| DEBUGF("\n"); |
| DEBUGF("FLASH: Index: %d\n", index); |
| |
| /* Init: no FLASHes known */ |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| flash_info[i].sector_count = -1; |
| flash_info[i].size = 0; |
| |
| /* check whether the address is 0 */ |
| if (flash_addr_table[index][i] == 0) |
| continue; |
| |
| /* call flash_get_size() to initialize sector address */ |
| size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], |
| &flash_info[i]); |
| |
| flash_info[i].size = size_b[i]; |
| |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) { |
| printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", |
| i+1, size_b[i], size_b[i] << 20); |
| flash_info[i].sector_count = -1; |
| flash_info[i].size = 0; |
| } |
| |
| /* Monitor protection ON by default */ |
| (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, |
| &flash_info[i]); |
| #if defined(CONFIG_ENV_IS_IN_FLASH) |
| (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[i]); |
| #if defined(CONFIG_ENV_ADDR_REDUND) |
| (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, |
| CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[i]); |
| #endif |
| #endif |
| total_b += flash_info[i].size; |
| } |
| |
| return total_b; |
| } |
| #endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */ |