| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Marvell International Ltd. |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <linux/libfdt.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| #include <asm/arch/cpu.h> |
| #include <linux/sizes.h> |
| #include <asm/armv8/mmu.h> |
| #include "soc.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define RAM_SIZE SZ_1G |
| |
| static struct mm_region ac5_mem_map[] = { |
| { |
| /* RAM */ |
| .phys = CONFIG_SYS_SDRAM_BASE, |
| .virt = CONFIG_SYS_SDRAM_BASE, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_INNER_SHARE |
| }, |
| { |
| /* MMIO regions */ |
| .phys = 0x00000000, |
| .virt = 0xa0000000, |
| .size = 0x100000, |
| |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, |
| { |
| /* MMIO regions */ |
| .phys = 0x100000, |
| .virt = 0x100000, |
| .size = 0x3ff00000, |
| |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, |
| { |
| /* MMIO regions */ |
| .phys = 0x7F000000, |
| .virt = 0x7F000000, |
| .size = 0x21000000, |
| |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, |
| { |
| 0, |
| } |
| }; |
| |
| struct mm_region *mem_map = ac5_mem_map; |
| |
| void reset_cpu(void) |
| { |
| } |
| |
| int print_cpuinfo(void) |
| { |
| soc_print_device_info(); |
| soc_print_clock_info(); |
| |
| return 0; |
| } |
| |
| int alleycat5_dram_init(void) |
| { |
| #define SCRATCH_PAD_REG 0x80010018 |
| int ret; |
| |
| /* override DDR_FW size if DTS is set with size */ |
| ret = fdtdec_setup_mem_size_base(); |
| if (ret == -EINVAL) |
| gd->ram_size = readl(SCRATCH_PAD_REG) * 4ULL; |
| |
| /* if DRAM size == 0, print error message */ |
| if (gd->ram_size == 0) { |
| pr_err("DRAM size not initialized - check DRAM configuration\n"); |
| printf("\n Using temporary DRAM size of 512MB.\n\n"); |
| gd->ram_size = SZ_512M; |
| } |
| |
| ac5_mem_map[0].size = gd->ram_size; |
| |
| return 0; |
| } |
| |
| int alleycat5_dram_init_banksize(void) |
| { |
| /* |
| * Config single DRAM bank |
| */ |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
| gd->bd->bi_dram[0].size = gd->ram_size; |
| |
| return 0; |
| } |
| |
| int timer_init(void) |
| { |
| return 0; |
| } |
| |
| /* |
| * get_ref_clk |
| * |
| * return: reference clock in MHz |
| */ |
| u32 get_ref_clk(void) |
| { |
| return 25; |
| } |