| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| * |
| * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00 |
| */ |
| |
| #include <common.h> |
| #include <mpc8260.h> |
| #include <board/hymod/flash.h> |
| |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /*----------------------------------------------------------------------- |
| * Protection Flags: |
| */ |
| #define FLAG_PROTECT_SET 0x01 |
| #define FLAG_PROTECT_CLEAR 0x02 |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| #if 0 |
| static ulong flash_get_size (vu_long *addr, flash_info_t *info); |
| static void flash_get_offsets (ulong base, flash_info_t *info); |
| #endif |
| static int write_word (flash_info_t *info, ulong dest, ulong data); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * probe for the existence of flash at bank word address "addr" |
| * 0 = yes, 1 = bad Manufacturer's Id, 2 = bad Device Id |
| */ |
| static int |
| bank_probe_word(bank_addr_t addr) |
| { |
| int retval; |
| |
| /* reset the flash */ |
| *addr = BANK_CMD_RST; |
| |
| /* check the manufacturer id */ |
| *addr = BANK_CMD_RD_ID; |
| if (*BANK_ADDR_REG_MAN(addr) != BANK_RD_ID_MAN) { |
| retval = -1; |
| goto out; |
| } |
| |
| /* check the device id */ |
| *addr = BANK_CMD_RD_ID; |
| if (*BANK_ADDR_REG_DEV(addr) != BANK_RD_ID_DEV) { |
| retval = -2; |
| goto out; |
| } |
| |
| retval = CFG_FLASH_TYPE; |
| |
| out: |
| /* reset the flash again */ |
| *addr = BANK_CMD_RST; |
| |
| return retval; |
| } |
| |
| /* |
| * probe for flash banks at address "base" and store info for any found |
| * into flash_info entry "fip". Must find at least one bank. |
| */ |
| static void |
| bank_probe(flash_info_t *fip, bank_addr_t base) |
| { |
| bank_addr_t addr, eaddr; |
| int nbanks; |
| |
| fip->flash_id = FLASH_UNKNOWN; |
| fip->size = 0L; |
| fip->sector_count = 0; |
| |
| addr = base; |
| eaddr = BANK_ADDR_BASE(addr, MAX_BANKS); |
| nbanks = 0; |
| |
| while (addr < eaddr) { |
| bank_addr_t addrw, eaddrw, addrb; |
| int i, osc, nsc, curtype = -1; |
| |
| addrw = addr; |
| eaddrw = BANK_ADDR_NEXT_WORD(addrw); |
| |
| while (addrw < eaddrw) { |
| int thistype; |
| |
| #ifdef FLASH_DEBUG |
| printf(" probing for flash at addr 0x%08lx\n", |
| (unsigned long)addrw); |
| #endif |
| if ((thistype = bank_probe_word(addrw++)) < 0) |
| goto out; |
| |
| if (curtype < 0) |
| curtype = thistype; |
| else { |
| if (thistype != curtype) { |
| printf("Differing flash type found!\n"); |
| goto out; |
| } |
| } |
| } |
| |
| if (curtype < 0) |
| goto out; |
| |
| /* bank exists - append info for this bank to *fip */ |
| fip->flash_id = FLASH_MAN_INTEL|curtype; |
| fip->size += BANK_SIZE; |
| osc = fip->sector_count; |
| fip->sector_count += BANK_NBLOCKS; |
| if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT) |
| panic("Too many sectors in flash at address 0x%08lx\n", |
| (unsigned long)base); |
| |
| addrb = addr; |
| for (i = osc; i < nsc; i++) { |
| fip->start[i] = (ulong)addrb; |
| fip->protect[i] = 0; |
| addrb = BANK_ADDR_NEXT_BLK(addrb); |
| } |
| |
| addr = BANK_ADDR_NEXT_BANK(addr); |
| nbanks++; |
| } |
| |
| out: |
| if (nbanks == 0) |
| panic("ERROR: no flash found at address 0x%08lx\n", |
| (unsigned long)base); |
| } |
| |
| static void |
| bank_reset(flash_info_t *info, int sect) |
| { |
| bank_addr_t addrw, eaddrw; |
| |
| addrw = (bank_addr_t)info->start[sect]; |
| eaddrw = BANK_ADDR_NEXT_WORD(addrw); |
| |
| while (addrw < eaddrw) { |
| #ifdef FLASH_DEBUG |
| printf(" writing reset cmd to addr 0x%08lx\n", |
| (unsigned long)addrw); |
| #endif |
| *addrw = BANK_CMD_RST; |
| addrw++; |
| } |
| } |
| |
| static void |
| bank_erase_init(flash_info_t *info, int sect) |
| { |
| bank_addr_t addrw, saddrw, eaddrw; |
| int flag; |
| |
| #ifdef FLASH_DEBUG |
| printf("0x%08lx BANK_CMD_PROG\n", BANK_CMD_PROG); |
| printf("0x%08lx BANK_CMD_ERASE1\n", BANK_CMD_ERASE1); |
| printf("0x%08lx BANK_CMD_ERASE2\n", BANK_CMD_ERASE2); |
| printf("0x%08lx BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT); |
| printf("0x%08lx BANK_CMD_RST\n", BANK_CMD_RST); |
| printf("0x%08lx BANK_STAT_RDY\n", BANK_STAT_RDY); |
| printf("0x%08lx BANK_STAT_ERR\n", BANK_STAT_ERR); |
| #endif |
| |
| saddrw = (bank_addr_t)info->start[sect]; |
| eaddrw = BANK_ADDR_NEXT_WORD(saddrw); |
| |
| #ifdef FLASH_DEBUG |
| printf("erasing sector %d, start addr = 0x%08lx " |
| "(bank next word addr = 0x%08lx)\n", sect, |
| (unsigned long)saddrw, (unsigned long)eaddrw); |
| #endif |
| |
| /* Disable intrs which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| for (addrw = saddrw; addrw < eaddrw; addrw++) { |
| #ifdef FLASH_DEBUG |
| printf(" writing erase cmd to addr 0x%08lx\n", |
| (unsigned long)addrw); |
| #endif |
| *addrw = BANK_CMD_ERASE1; |
| *addrw = BANK_CMD_ERASE2; |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| } |
| |
| static int |
| bank_erase_poll(flash_info_t *info, int sect) |
| { |
| bank_addr_t addrw, saddrw, eaddrw; |
| int sectdone, haderr; |
| |
| saddrw = (bank_addr_t)info->start[sect]; |
| eaddrw = BANK_ADDR_NEXT_WORD(saddrw); |
| |
| sectdone = 1; |
| haderr = 0; |
| |
| for (addrw = saddrw; addrw < eaddrw; addrw++) { |
| bank_word_t stat = *addrw; |
| |
| #ifdef FLASH_DEBUG |
| printf(" checking status at addr " |
| "0x%08lx [0x%08lx]\n", |
| (unsigned long)addrw, stat); |
| #endif |
| if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY) |
| sectdone = 0; |
| else if ((stat & BANK_STAT_ERR) != 0) { |
| printf(" failed on sector %d " |
| "(stat = 0x%08lx) at " |
| "address 0x%08lx\n", |
| sect, stat, |
| (unsigned long)addrw); |
| *addrw = BANK_CMD_CLR_STAT; |
| haderr = 1; |
| } |
| } |
| |
| if (haderr) |
| return (-1); |
| else |
| return (sectdone); |
| } |
| |
| static int |
| bank_write_word(bank_addr_t addr, bank_word_t value) |
| { |
| bank_word_t stat; |
| ulong start; |
| int flag, retval; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| *addr = BANK_CMD_PROG; |
| |
| *addr = value; |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| retval = 0; |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| do { |
| if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { |
| retval = 1; |
| goto done; |
| } |
| stat = *addr; |
| } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY); |
| |
| if ((stat & BANK_STAT_ERR) != 0) { |
| printf("flash program failed (stat = 0x%08lx) " |
| "at address 0x%08lx\n", (ulong)stat, (ulong)addr); |
| *addr = BANK_CMD_CLR_STAT; |
| retval = 3; |
| } |
| |
| done: |
| /* reset to read mode */ |
| *addr = BANK_CMD_RST; |
| |
| return (retval); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long |
| flash_init(void) |
| { |
| int i; |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| } |
| |
| bank_probe(&flash_info[0], (bank_addr_t)CFG_FLASH_BASE); |
| |
| /* |
| * protect monitor and environment sectors |
| */ |
| |
| #if CFG_MONITOR_BASE == CFG_FLASH_BASE |
| (void)flash_protect(FLAG_PROTECT_SET, |
| CFG_MONITOR_BASE, |
| CFG_MONITOR_BASE+CFG_MONITOR_LEN-1, |
| &flash_info[0]); |
| #endif |
| |
| #if defined(CFG_FLASH_ENV_ADDR) |
| (void)flash_protect(FLAG_PROTECT_SET, |
| CFG_FLASH_ENV_ADDR, |
| #if defined(CFG_FLASH_ENV_BUF) |
| CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_BUF - 1, |
| #else |
| CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_SIZE - 1, |
| #endif |
| &flash_info[0]); |
| #endif |
| |
| return flash_info[0].size; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| #if 0 |
| static void |
| flash_get_offsets(ulong base, flash_info_t *info) |
| { |
| int i; |
| |
| /* set up sector start adress table */ |
| if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00008000; |
| info->start[2] = base + 0x0000C000; |
| info->start[3] = base + 0x00010000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00020000) - 0x00060000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00008000; |
| info->start[i--] = base + info->size - 0x0000C000; |
| info->start[i--] = base + info->size - 0x00010000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00020000; |
| } |
| } |
| |
| } |
| #endif /* 0 */ |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void |
| flash_print_info(flash_info_t *info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_INTEL: printf ("INTEL "); break; |
| default: printf ("Unknown Vendor "); break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_28F320J5: printf ("28F320J5 (32 Mbit, 2 x 16bit)\n"); |
| break; |
| default: printf ("Unknown Chip Type\n"); |
| break; |
| } |
| |
| printf (" Size: %ld MB in %d Sectors\n", |
| info->size >> 20, info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[i], |
| info->protect[i] ? " (RO)" : " " |
| ); |
| } |
| printf ("\n"); |
| return; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| #if 0 |
| static ulong |
| flash_get_size(vu_long *addr, flash_info_t *info) |
| { |
| short i; |
| ulong value; |
| ulong base = (ulong)addr; |
| |
| |
| /* Write auto select command: read Manufacturer ID */ |
| addr[0x0555] = 0x00AA00AA; |
| addr[0x02AA] = 0x00550055; |
| addr[0x0555] = 0x00900090; |
| |
| value = addr[0]; |
| |
| switch (value) { |
| case AMD_MANUFACT: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| case FUJ_MANUFACT: |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| value = addr[1]; /* device ID */ |
| |
| switch (value) { |
| case AMD_ID_LV400T: |
| info->flash_id += FLASH_AM400T; |
| info->sector_count = 11; |
| info->size = 0x00100000; |
| break; /* => 1 MB */ |
| |
| case AMD_ID_LV400B: |
| info->flash_id += FLASH_AM400B; |
| info->sector_count = 11; |
| info->size = 0x00100000; |
| break; /* => 1 MB */ |
| |
| case AMD_ID_LV800T: |
| info->flash_id += FLASH_AM800T; |
| info->sector_count = 19; |
| info->size = 0x00200000; |
| break; /* => 2 MB */ |
| |
| case AMD_ID_LV800B: |
| info->flash_id += FLASH_AM800B; |
| info->sector_count = 19; |
| info->size = 0x00200000; |
| break; /* => 2 MB */ |
| |
| case AMD_ID_LV160T: |
| info->flash_id += FLASH_AM160T; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| |
| case AMD_ID_LV160B: |
| info->flash_id += FLASH_AM160B; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| #if 0 /* enable when device IDs are available */ |
| case AMD_ID_LV320T: |
| info->flash_id += FLASH_AM320T; |
| info->sector_count = 67; |
| info->size = 0x00800000; |
| break; /* => 8 MB */ |
| |
| case AMD_ID_LV320B: |
| info->flash_id += FLASH_AM320B; |
| info->sector_count = 67; |
| info->size = 0x00800000; |
| break; /* => 8 MB */ |
| #endif |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return (0); /* => no or unknown flash */ |
| |
| } |
| |
| /* set up sector start adress table */ |
| if (info->flash_id & FLASH_BTYPE) { |
| /* set sector offsets for bottom boot block type */ |
| info->start[0] = base + 0x00000000; |
| info->start[1] = base + 0x00008000; |
| info->start[2] = base + 0x0000C000; |
| info->start[3] = base + 0x00010000; |
| for (i = 4; i < info->sector_count; i++) { |
| info->start[i] = base + (i * 0x00020000) - 0x00060000; |
| } |
| } else { |
| /* set sector offsets for top boot block type */ |
| i = info->sector_count - 1; |
| info->start[i--] = base + info->size - 0x00008000; |
| info->start[i--] = base + info->size - 0x0000C000; |
| info->start[i--] = base + info->size - 0x00010000; |
| for (; i >= 0; i--) { |
| info->start[i] = base + i * 0x00020000; |
| } |
| } |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ |
| /* D0 = 1 if protected */ |
| addr = (volatile unsigned long *)(info->start[i]); |
| info->protect[i] = addr[2] & 1; |
| } |
| |
| /* |
| * Prevent writes to uninitialized FLASH. |
| */ |
| if (info->flash_id != FLASH_UNKNOWN) { |
| addr = (volatile unsigned long *)info->start[0]; |
| |
| *addr = 0x00F000F0; /* reset bank */ |
| } |
| |
| return (info->size); |
| } |
| #endif /* 0 */ |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int |
| flash_erase(flash_info_t *info, int s_first, int s_last) |
| { |
| int prot, sect, haderr; |
| ulong start, now, last; |
| int rcode = 0; |
| |
| #ifdef FLASH_DEBUG |
| printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n" |
| " Bank # %d: ", s_last - s_first + 1, s_first, s_last, |
| (info - flash_info) + 1); |
| flash_print_info(info); |
| #endif |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf("- Warning: %d protected sector%s will not be erased!\n", |
| prot, (prot > 1 ? "s" : "")); |
| } |
| |
| start = get_timer (0); |
| last = 0; |
| haderr = 0; |
| |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| ulong estart; |
| int sectdone; |
| |
| bank_erase_init(info, sect); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay (1000); |
| |
| estart = get_timer(start); |
| |
| do { |
| now = get_timer(start); |
| |
| if (now - estart > CFG_FLASH_ERASE_TOUT) { |
| printf ("Timeout (sect %d)\n", sect); |
| haderr = 1; |
| rcode = 1; |
| break; |
| } |
| |
| #ifndef FLASH_DEBUG |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc ('.'); |
| last = now; |
| } |
| #endif |
| |
| sectdone = bank_erase_poll(info, sect); |
| |
| if (sectdone < 0) { |
| haderr = 1; |
| rcode = 1; |
| break; |
| } |
| |
| } while (!sectdone); |
| |
| if (haderr) |
| break; |
| } |
| } |
| |
| if (haderr > 0) |
| printf (" failed\n"); |
| else |
| printf (" done\n"); |
| |
| /* reset to read mode */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| bank_reset(info, sect); |
| } |
| } |
| return rcode; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| |
| int |
| write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp, data; |
| int i, l, rc; |
| |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i=0, cp=wp; i<l; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| for (; i<4 && cnt>0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt==0 && i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while (cnt >= 4) { |
| data = 0; |
| for (i=0; i<4; ++i) { |
| data = (data << 8) | *src++; |
| } |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if (cnt == 0) { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| return (write_word(info, wp, data)); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int |
| write_word(flash_info_t *info, ulong dest, ulong data) |
| { |
| int retval; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*(ulong *)dest & data) != data) { |
| return (2); |
| } |
| |
| retval = bank_write_word((bank_addr_t)dest, (bank_word_t)data); |
| |
| return (retval); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |