| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Test for bootdev functions. All start with 'bootdev' |
| * |
| * Copyright 2021 Google LLC |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #include <common.h> |
| #include <bootdev.h> |
| #include <bootflow.h> |
| #include <bootmeth.h> |
| #include <bootstd.h> |
| #include <cli.h> |
| #include <dm.h> |
| #include <expo.h> |
| #ifdef CONFIG_SANDBOX |
| #include <asm/test.h> |
| #endif |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <test/suites.h> |
| #include <test/ut.h> |
| #include "bootstd_common.h" |
| #include "../../boot/bootflow_internal.h" |
| #include "../../boot/scene_internal.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| extern U_BOOT_DRIVER(bootmeth_script); |
| |
| static int inject_response(struct unit_test_state *uts) |
| { |
| /* |
| * The image being booted presents a menu of options: |
| * |
| * Fedora-Workstation-armhfp-31-1.9 Boot Options. |
| * 1: Fedora-Workstation-armhfp-31-1.9 (5.3.7-301.fc31.armv7hl) |
| * Enter choice: |
| * |
| * Provide input for this, to avoid waiting two seconds for a timeout. |
| */ |
| ut_asserteq(2, console_in_puts("1\n")); |
| |
| return 0; |
| } |
| |
| /* Check 'bootflow scan/list' commands */ |
| static int bootflow_cmd(struct unit_test_state *uts) |
| { |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootdev select 1", 0)); |
| ut_assert_console_end(); |
| ut_assertok(run_command("bootflow scan -lH", 0)); |
| ut_assert_nextline("Scanning for bootflows in bootdev 'mmc1.bootdev'"); |
| ut_assert_nextline("Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':"); |
| ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':"); |
| ut_assert_nextline(" 0 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_nextline("No more bootdevs"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("bootflow list", 0)); |
| ut_assert_nextline("Showing bootflows for bootdev 'mmc1.bootdev'"); |
| ut_assert_nextline("Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline(" 0 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check 'bootflow scan' with a label / seq */ |
| static int bootflow_cmd_label(struct unit_test_state *uts) |
| { |
| test_set_eth_enable(false); |
| |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan -lH mmc1", 0)); |
| ut_assert_nextline("Scanning for bootflows with label 'mmc1'"); |
| ut_assert_skip_to_line("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("bootflow scan -lH 0", 0)); |
| ut_assert_nextline("Scanning for bootflows with label '0'"); |
| ut_assert_skip_to_line("(0 bootflows, 0 valid)"); |
| ut_assert_console_end(); |
| |
| /* |
| * with ethernet enabled we have 8 devices ahead of the mmc ones: |
| * |
| * ut_assertok(run_command("bootdev list", 0)); |
| * Seq Probed Status Uclass Name |
| * --- ------ ------ -------- ------------------ |
| * 0 [ + ] OK ethernet eth@10002000.bootdev |
| * 1 [ ] OK ethernet eth@10003000.bootdev |
| * 2 [ ] OK ethernet sbe5.bootdev |
| * 3 [ ] OK ethernet eth@10004000.bootdev |
| * 4 [ ] OK ethernet phy-test-eth.bootdev |
| * 5 [ ] OK ethernet dsa-test-eth.bootdev |
| * 6 [ ] OK ethernet dsa-test@0.bootdev |
| * 7 [ ] OK ethernet dsa-test@1.bootdev |
| * 8 [ ] OK mmc mmc2.bootdev |
| * 9 [ + ] OK mmc mmc1.bootdev |
| * a [ ] OK mmc mmc0.bootdev |
| */ |
| ut_assertok(run_command("bootflow scan -lH 9", 0)); |
| ut_assert_nextline("Scanning for bootflows with label '9'"); |
| ut_assert_skip_to_line("(1 bootflow, 1 valid)"); |
| |
| ut_assertok(run_command("bootflow scan -lH 0", 0)); |
| ut_assert_nextline("Scanning for bootflows with label '0'"); |
| ut_assert_skip_to_line("(0 bootflows, 0 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_label, UT_TESTF_DM | UT_TESTF_SCAN_FDT | |
| UT_TESTF_ETH_BOOTDEV); |
| |
| /* Check 'bootflow scan/list' commands using all bootdevs */ |
| static int bootflow_cmd_glob(struct unit_test_state *uts) |
| { |
| ut_assertok(bootstd_test_drop_bootdev_order(uts)); |
| |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan -lGH", 0)); |
| ut_assert_nextline("Scanning for bootflows in all bootdevs"); |
| ut_assert_nextline("Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':"); |
| ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':"); |
| ut_assert_nextline(" 0 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_nextline("Scanning bootdev 'mmc0.bootdev':"); |
| ut_assert_nextline("No more bootdevs"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("bootflow list", 0)); |
| ut_assert_nextline("Showing all bootflows"); |
| ut_assert_nextline("Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline(" 0 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_glob, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check 'bootflow scan -e' */ |
| static int bootflow_cmd_scan_e(struct unit_test_state *uts) |
| { |
| ut_assertok(bootstd_test_drop_bootdev_order(uts)); |
| |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan -aleGH", 0)); |
| ut_assert_nextline("Scanning for bootflows in all bootdevs"); |
| ut_assert_nextline("Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':"); |
| ut_assert_nextline(" 0 extlinux media mmc 0 mmc2.bootdev.whole <NULL>"); |
| ut_assert_nextline(" ** No partition found, err=-93: Protocol not supported"); |
| ut_assert_nextline(" 1 efi media mmc 0 mmc2.bootdev.whole <NULL>"); |
| ut_assert_nextline(" ** No partition found, err=-93: Protocol not supported"); |
| |
| ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':"); |
| ut_assert_nextline(" 2 extlinux media mmc 0 mmc1.bootdev.whole <NULL>"); |
| ut_assert_nextline(" ** No partition found, err=-2: No such file or directory"); |
| ut_assert_nextline(" 3 efi media mmc 0 mmc1.bootdev.whole <NULL>"); |
| ut_assert_nextline(" ** No partition found, err=-2: No such file or directory"); |
| ut_assert_nextline(" 4 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_nextline(" 5 efi fs mmc 1 mmc1.bootdev.part_1 efi/boot/bootsbox.efi"); |
| |
| ut_assert_skip_to_line("Scanning bootdev 'mmc0.bootdev':"); |
| ut_assert_skip_to_line(" 3f efi media mmc 0 mmc0.bootdev.whole <NULL>"); |
| ut_assert_nextline(" ** No partition found, err=-93: Protocol not supported"); |
| ut_assert_nextline("No more bootdevs"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(64 bootflows, 1 valid)"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("bootflow list", 0)); |
| ut_assert_nextline("Showing all bootflows"); |
| ut_assert_nextline("Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline(" 0 extlinux media mmc 0 mmc2.bootdev.whole <NULL>"); |
| ut_assert_nextline(" 1 efi media mmc 0 mmc2.bootdev.whole <NULL>"); |
| ut_assert_skip_to_line(" 4 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_skip_to_line(" 3f efi media mmc 0 mmc0.bootdev.whole <NULL>"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(64 bootflows, 1 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_scan_e, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check 'bootflow info' */ |
| static int bootflow_cmd_info(struct unit_test_state *uts) |
| { |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootdev select 1", 0)); |
| ut_assert_console_end(); |
| ut_assertok(run_command("bootflow scan", 0)); |
| ut_assert_console_end(); |
| ut_assertok(run_command("bootflow select 0", 0)); |
| ut_assert_console_end(); |
| ut_assertok(run_command("bootflow info", 0)); |
| ut_assert_nextline("Name: mmc1.bootdev.part_1"); |
| ut_assert_nextline("Device: mmc1.bootdev"); |
| ut_assert_nextline("Block dev: mmc1.blk"); |
| ut_assert_nextline("Method: extlinux"); |
| ut_assert_nextline("State: ready"); |
| ut_assert_nextline("Partition: 1"); |
| ut_assert_nextline("Subdir: (none)"); |
| ut_assert_nextline("Filename: /extlinux/extlinux.conf"); |
| ut_assert_nextlinen("Buffer: "); |
| ut_assert_nextline("Size: 253 (595 bytes)"); |
| ut_assert_nextline("OS: Fedora-Workstation-armhfp-31-1.9 (5.3.7-301.fc31.armv7hl)"); |
| ut_assert_nextline("Cmdline: (none)"); |
| ut_assert_nextline("Logo: (none)"); |
| ut_assert_nextline("FDT: <NULL>"); |
| ut_assert_nextline("Error: 0"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("bootflow info -d", 0)); |
| ut_assert_nextline("Name: mmc1.bootdev.part_1"); |
| ut_assert_skip_to_line("Error: 0"); |
| ut_assert_nextline("Contents:"); |
| ut_assert_nextline("%s", ""); |
| ut_assert_nextline("# extlinux.conf generated by appliance-creator"); |
| ut_assert_skip_to_line(" initrd /initramfs-5.3.7-301.fc31.armv7hl.img"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_info, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check 'bootflow scan -b' to boot the first available bootdev */ |
| static int bootflow_scan_boot(struct unit_test_state *uts) |
| { |
| console_record_reset_enable(); |
| ut_assertok(inject_response(uts)); |
| ut_assertok(run_command("bootflow scan -b", 0)); |
| ut_assert_nextline( |
| "** Booting bootflow 'mmc1.bootdev.part_1' with extlinux"); |
| ut_assert_nextline("Ignoring unknown command: ui"); |
| |
| /* |
| * We expect it to get through to boot although sandbox always returns |
| * -EFAULT as it cannot actually boot the kernel |
| */ |
| ut_assert_skip_to_line("sandbox: continuing, as we cannot run Linux"); |
| ut_assert_nextline("Boot failed (err=-14)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_scan_boot, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check iterating through available bootflows */ |
| static int bootflow_iter(struct unit_test_state *uts) |
| { |
| struct bootflow_iter iter; |
| struct bootflow bflow; |
| |
| bootstd_clear_glob(); |
| |
| /* The first device is mmc2.bootdev which has no media */ |
| ut_asserteq(-EPROTONOSUPPORT, |
| bootflow_scan_first(NULL, NULL, &iter, |
| BOOTFLOWIF_ALL | BOOTFLOWIF_SKIP_GLOBAL, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(0, iter.cur_method); |
| ut_asserteq(0, iter.part); |
| ut_asserteq(0, iter.max_part); |
| ut_asserteq_str("extlinux", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| |
| /* |
| * This shows MEDIA even though there is none, since in |
| * bootdev_find_in_blk() we call part_get_info() which returns |
| * -EPROTONOSUPPORT. Ideally it would return -EEOPNOTSUPP and we would |
| * know. |
| */ |
| ut_asserteq(BOOTFLOWST_MEDIA, bflow.state); |
| |
| ut_asserteq(-EPROTONOSUPPORT, bootflow_scan_next(&iter, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(1, iter.cur_method); |
| ut_asserteq(0, iter.part); |
| ut_asserteq(0, iter.max_part); |
| ut_asserteq_str("efi", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| ut_asserteq(BOOTFLOWST_MEDIA, bflow.state); |
| bootflow_free(&bflow); |
| |
| /* The next device is mmc1.bootdev - at first we use the whole device */ |
| ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(0, iter.cur_method); |
| ut_asserteq(0, iter.part); |
| ut_asserteq(0x1e, iter.max_part); |
| ut_asserteq_str("extlinux", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| ut_asserteq(BOOTFLOWST_MEDIA, bflow.state); |
| bootflow_free(&bflow); |
| |
| ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(1, iter.cur_method); |
| ut_asserteq(0, iter.part); |
| ut_asserteq(0x1e, iter.max_part); |
| ut_asserteq_str("efi", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| ut_asserteq(BOOTFLOWST_MEDIA, bflow.state); |
| bootflow_free(&bflow); |
| |
| /* Then more to partition 1 where we find something */ |
| ut_assertok(bootflow_scan_next(&iter, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(0, iter.cur_method); |
| ut_asserteq(1, iter.part); |
| ut_asserteq(0x1e, iter.max_part); |
| ut_asserteq_str("extlinux", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| ut_asserteq(BOOTFLOWST_READY, bflow.state); |
| bootflow_free(&bflow); |
| |
| ut_asserteq(-ENOENT, bootflow_scan_next(&iter, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(1, iter.cur_method); |
| ut_asserteq(1, iter.part); |
| ut_asserteq(0x1e, iter.max_part); |
| ut_asserteq_str("efi", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| ut_asserteq(BOOTFLOWST_FS, bflow.state); |
| bootflow_free(&bflow); |
| |
| /* Then more to partition 2 which exists but is not bootable */ |
| ut_asserteq(-EINVAL, bootflow_scan_next(&iter, &bflow)); |
| ut_asserteq(2, iter.num_methods); |
| ut_asserteq(0, iter.cur_method); |
| ut_asserteq(2, iter.part); |
| ut_asserteq(0x1e, iter.max_part); |
| ut_asserteq_str("extlinux", iter.method->name); |
| ut_asserteq(0, bflow.err); |
| ut_asserteq(BOOTFLOWST_MEDIA, bflow.state); |
| bootflow_free(&bflow); |
| |
| bootflow_iter_uninit(&iter); |
| |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_iter, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| #if defined(CONFIG_SANDBOX) && defined(CONFIG_BOOTMETH_GLOBAL) |
| /* Check using the system bootdev */ |
| static int bootflow_system(struct unit_test_state *uts) |
| { |
| struct udevice *bootstd, *dev; |
| |
| if (!IS_ENABLED(CONFIG_CMD_BOOTEFI_BOOTMGR)) |
| return -EAGAIN; |
| ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd)); |
| ut_assertok(device_bind(bootstd, DM_DRIVER_GET(bootmeth_efi_mgr), |
| "efi_mgr", 0, ofnode_null(), &dev)); |
| ut_assertok(device_probe(dev)); |
| sandbox_set_fake_efi_mgr_dev(dev, true); |
| |
| /* We should get a single 'bootmgr' method right at the end */ |
| bootstd_clear_glob(); |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan -lH", 0)); |
| ut_assert_skip_to_line( |
| " 0 efi_mgr ready (none) 0 <NULL> <NULL>"); |
| ut_assert_skip_to_line("No more bootdevs"); |
| ut_assert_skip_to_line("(2 bootflows, 2 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_system, UT_TESTF_DM | UT_TESTF_SCAN_PDATA | |
| UT_TESTF_SCAN_FDT); |
| #endif |
| |
| /* Check disabling a bootmethod if it requests it */ |
| static int bootflow_iter_disable(struct unit_test_state *uts) |
| { |
| struct udevice *bootstd, *dev; |
| struct bootflow_iter iter; |
| struct bootflow bflow; |
| int i; |
| |
| /* Add the EFI bootmgr driver */ |
| ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd)); |
| ut_assertok(device_bind_driver(bootstd, "bootmeth_sandbox", "sandbox", |
| &dev)); |
| |
| ut_assertok(bootstd_test_drop_bootdev_order(uts)); |
| |
| bootstd_clear_glob(); |
| console_record_reset_enable(); |
| ut_assertok(inject_response(uts)); |
| ut_assertok(run_command("bootflow scan -lbH", 0)); |
| |
| /* Try to boot the bootmgr flow, which will fail */ |
| console_record_reset_enable(); |
| ut_assertok(bootflow_scan_first(NULL, NULL, &iter, 0, &bflow)); |
| ut_asserteq(3, iter.num_methods); |
| ut_asserteq_str("sandbox", iter.method->name); |
| ut_assertok(inject_response(uts)); |
| ut_asserteq(-ENOTSUPP, bootflow_run_boot(&iter, &bflow)); |
| |
| ut_assert_skip_to_line("Boot method 'sandbox' failed and will not be retried"); |
| ut_assert_console_end(); |
| |
| /* Check that the sandbox bootmeth has been removed */ |
| ut_asserteq(2, iter.num_methods); |
| for (i = 0; i < iter.num_methods; i++) |
| ut_assert(strcmp("sandbox", iter.method_order[i]->name)); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_iter_disable, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check 'bootflow scan' with a bootmeth ordering including a global bootmeth */ |
| static int bootflow_scan_glob_bootmeth(struct unit_test_state *uts) |
| { |
| if (!IS_ENABLED(CONFIG_BOOTMETH_GLOBAL)) |
| return -EAGAIN; |
| |
| ut_assertok(bootstd_test_drop_bootdev_order(uts)); |
| |
| /* |
| * Make sure that the -G flag makes the scan fail, since this is not |
| * supported when an ordering is provided |
| */ |
| console_record_reset_enable(); |
| ut_assertok(bootmeth_set_order("efi firmware0")); |
| ut_assertok(run_command("bootflow scan -lGH", 0)); |
| ut_assert_nextline("Scanning for bootflows in all bootdevs"); |
| ut_assert_nextline( |
| "Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(0 bootflows, 0 valid)"); |
| ut_assert_console_end(); |
| |
| ut_assertok(run_command("bootflow scan -lH", 0)); |
| ut_assert_nextline("Scanning for bootflows in all bootdevs"); |
| ut_assert_nextline( |
| "Seq Method State Uclass Part Name Filename"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("Scanning global bootmeth 'firmware0':"); |
| ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':"); |
| ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':"); |
| ut_assert_nextline("Scanning bootdev 'mmc0.bootdev':"); |
| ut_assert_nextline("No more bootdevs"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("(0 bootflows, 0 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_scan_glob_bootmeth, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check 'bootflow boot' to boot a selected bootflow */ |
| static int bootflow_cmd_boot(struct unit_test_state *uts) |
| { |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootdev select 1", 0)); |
| ut_assert_console_end(); |
| ut_assertok(run_command("bootflow scan", 0)); |
| ut_assert_console_end(); |
| ut_assertok(run_command("bootflow select 0", 0)); |
| ut_assert_console_end(); |
| |
| ut_assertok(inject_response(uts)); |
| ut_asserteq(1, run_command("bootflow boot", 0)); |
| ut_assert_nextline( |
| "** Booting bootflow 'mmc1.bootdev.part_1' with extlinux"); |
| ut_assert_nextline("Ignoring unknown command: ui"); |
| |
| /* |
| * We expect it to get through to boot although sandbox always returns |
| * -EFAULT as it cannot actually boot the kernel |
| */ |
| ut_assert_skip_to_line("sandbox: continuing, as we cannot run Linux"); |
| ut_assert_nextline("Boot failed (err=-14)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_boot, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /** |
| * prep_mmc4_bootdev() - Set up the mmc4 bootdev so we can access a fake Armbian |
| * |
| * @uts: Unit test state |
| * Returns 0 on success, -ve on failure |
| */ |
| static int prep_mmc4_bootdev(struct unit_test_state *uts) |
| { |
| static const char *order[] = {"mmc2", "mmc1", "mmc4", NULL}; |
| struct udevice *dev, *bootstd; |
| struct bootstd_priv *std; |
| const char **old_order; |
| ofnode node; |
| |
| /* Enable the mmc4 node since we need a second bootflow */ |
| node = ofnode_path("/mmc4"); |
| ut_assertok(lists_bind_fdt(gd->dm_root, node, &dev, NULL, false)); |
| |
| /* Enable the script bootmeth too */ |
| ut_assertok(uclass_first_device_err(UCLASS_BOOTSTD, &bootstd)); |
| ut_assertok(device_bind(bootstd, DM_DRIVER_REF(bootmeth_script), |
| "bootmeth_script", 0, ofnode_null(), &dev)); |
| |
| /* Change the order to include mmc4 */ |
| std = dev_get_priv(bootstd); |
| old_order = std->bootdev_order; |
| std->bootdev_order = order; |
| |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan", 0)); |
| ut_assert_console_end(); |
| |
| /* Restore the order used by the device tree */ |
| std->bootdev_order = old_order; |
| |
| return 0; |
| } |
| |
| /* Check 'bootflow menu' to select a bootflow */ |
| static int bootflow_cmd_menu(struct unit_test_state *uts) |
| { |
| char prev[3]; |
| |
| ut_assertok(prep_mmc4_bootdev(uts)); |
| |
| /* Add keypresses to move to and select the second one in the list */ |
| prev[0] = CTL_CH('n'); |
| prev[1] = '\r'; |
| prev[2] = '\0'; |
| ut_asserteq(2, console_in_puts(prev)); |
| |
| ut_assertok(run_command("bootflow menu", 0)); |
| ut_assert_nextline("Selected: Armbian"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_menu, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check searching for a single bootdev using the hunters */ |
| static int bootflow_cmd_hunt_single(struct unit_test_state *uts) |
| { |
| struct bootstd_priv *std; |
| |
| /* get access to the used hunters */ |
| ut_assertok(bootstd_get_priv(&std)); |
| |
| ut_assertok(bootstd_test_drop_bootdev_order(uts)); |
| |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan -l mmc1", 0)); |
| ut_assert_nextline("Scanning for bootflows with label 'mmc1'"); |
| ut_assert_skip_to_line("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| /* check that the hunter was used */ |
| ut_asserteq(BIT(MMC_HUNTER) | BIT(1), std->hunters_used); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_hunt_single, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /* Check searching for a uclass label using the hunters */ |
| static int bootflow_cmd_hunt_label(struct unit_test_state *uts) |
| { |
| struct bootstd_priv *std; |
| |
| /* get access to the used hunters */ |
| ut_assertok(bootstd_get_priv(&std)); |
| |
| test_set_skip_delays(true); |
| test_set_eth_enable(false); |
| ut_assertok(bootstd_test_drop_bootdev_order(uts)); |
| |
| console_record_reset_enable(); |
| ut_assertok(run_command("bootflow scan -l mmc", 0)); |
| |
| /* check that the hunter was used */ |
| ut_asserteq(BIT(MMC_HUNTER) | BIT(1), std->hunters_used); |
| |
| /* check that we got the mmc1 bootflow */ |
| ut_assert_nextline("Scanning for bootflows with label 'mmc'"); |
| ut_assert_nextlinen("Seq"); |
| ut_assert_nextlinen("---"); |
| ut_assert_nextline("Hunting with: simple_bus"); |
| ut_assert_nextline("Found 2 extension board(s)."); |
| ut_assert_nextline("Hunting with: mmc"); |
| ut_assert_nextline("Scanning bootdev 'mmc2.bootdev':"); |
| ut_assert_nextline("Scanning bootdev 'mmc1.bootdev':"); |
| ut_assert_nextline( |
| " 0 extlinux ready mmc 1 mmc1.bootdev.part_1 /extlinux/extlinux.conf"); |
| ut_assert_nextline("Scanning bootdev 'mmc0.bootdev':"); |
| ut_assert_skip_to_line("(1 bootflow, 1 valid)"); |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmd_hunt_label, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /** |
| * check_font() - Check that the font size for an item matches expectations |
| * |
| * @uts: Unit test state |
| * @scn: Scene containing the text object |
| * @id: ID of the text object |
| * Returns 0 on success, -ve on failure |
| */ |
| static int check_font(struct unit_test_state *uts, struct scene *scn, uint id, |
| int font_size) |
| { |
| struct scene_obj_txt *txt; |
| |
| txt = scene_obj_find(scn, id, SCENEOBJT_TEXT); |
| ut_assertnonnull(txt); |
| |
| ut_asserteq(font_size, txt->font_size); |
| |
| return 0; |
| } |
| |
| /* Check themes work with a bootflow menu */ |
| static int bootflow_menu_theme(struct unit_test_state *uts) |
| { |
| const int font_size = 30; |
| struct scene *scn; |
| struct expo *exp; |
| ofnode node; |
| int i; |
| |
| ut_assertok(prep_mmc4_bootdev(uts)); |
| |
| ut_assertok(bootflow_menu_new(&exp)); |
| node = ofnode_path("/bootstd/theme"); |
| ut_assert(ofnode_valid(node)); |
| ut_assertok(bootflow_menu_apply_theme(exp, node)); |
| |
| scn = expo_lookup_scene_id(exp, MAIN); |
| ut_assertnonnull(scn); |
| |
| /* |
| * Check that the txt objects have the correct font size from the |
| * device tree node: bootstd/theme |
| * |
| * Check both menu items, since there are two bootflows |
| */ |
| ut_assertok(check_font(uts, scn, OBJ_PROMPT, font_size)); |
| ut_assertok(check_font(uts, scn, OBJ_POINTER, font_size)); |
| for (i = 0; i < 2; i++) { |
| ut_assertok(check_font(uts, scn, ITEM_DESC + i, font_size)); |
| ut_assertok(check_font(uts, scn, ITEM_KEY + i, font_size)); |
| ut_assertok(check_font(uts, scn, ITEM_LABEL + i, font_size)); |
| } |
| |
| expo_destroy(exp); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_menu_theme, UT_TESTF_DM | UT_TESTF_SCAN_FDT); |
| |
| /** |
| * check_arg() - Check both the normal case and the buffer-overflow case |
| * |
| * @uts: Unit-test state |
| * @expect_ret: Expected return value (i.e. buffer length) |
| * @expect_str: String expected to be returned |
| * @buf: Buffer to use |
| * @from: Original cmdline to update |
| * @arg: Argument to update (e.g. "console") |
| * @val: Value to set (e.g. "ttyS2") or NULL to delete the argument if present, |
| * "" to set it to an empty value (e.g. "console=") and BOOTFLOWCL_EMPTY to add |
| * it without any value ("initrd") |
| */ |
| static int check_arg(struct unit_test_state *uts, int expect_ret, |
| const char *expect_str, char *buf, const char *from, |
| const char *arg, const char *val) |
| { |
| /* check for writing outside the reported bounds */ |
| buf[expect_ret] = '['; |
| ut_asserteq(expect_ret, |
| cmdline_set_arg(buf, expect_ret, from, arg, val, NULL)); |
| ut_asserteq_str(expect_str, buf); |
| ut_asserteq('[', buf[expect_ret]); |
| |
| /* do the test again but with one less byte in the buffer */ |
| ut_asserteq(-E2BIG, cmdline_set_arg(buf, expect_ret - 1, from, arg, |
| val, NULL)); |
| |
| return 0; |
| } |
| |
| /* Test of bootflow_cmdline_set_arg() */ |
| static int test_bootflow_cmdline_set(struct unit_test_state *uts) |
| { |
| char buf[50]; |
| const int size = sizeof(buf); |
| |
| /* |
| * note that buffer-overflow tests are immediately each test case, just |
| * top keep the code together |
| */ |
| |
| /* add an arg that doesn't already exist, starting from empty */ |
| ut_asserteq(-ENOENT, cmdline_set_arg(buf, size, NULL, "me", NULL, |
| NULL)); |
| |
| ut_assertok(check_arg(uts, 3, "me", buf, NULL, "me", BOOTFLOWCL_EMPTY)); |
| ut_assertok(check_arg(uts, 4, "me=", buf, NULL, "me", "")); |
| ut_assertok(check_arg(uts, 8, "me=fred", buf, NULL, "me", "fred")); |
| |
| /* add an arg that doesn't already exist, starting from non-empty */ |
| ut_assertok(check_arg(uts, 11, "arg=123 me", buf, "arg=123", "me", |
| BOOTFLOWCL_EMPTY)); |
| ut_assertok(check_arg(uts, 12, "arg=123 me=", buf, "arg=123", "me", |
| "")); |
| ut_assertok(check_arg(uts, 16, "arg=123 me=fred", buf, "arg=123", "me", |
| "fred")); |
| |
| /* update an arg at the start */ |
| ut_assertok(check_arg(uts, 1, "", buf, "arg=123", "arg", NULL)); |
| ut_assertok(check_arg(uts, 4, "arg", buf, "arg=123", "arg", |
| BOOTFLOWCL_EMPTY)); |
| ut_assertok(check_arg(uts, 5, "arg=", buf, "arg=123", "arg", "")); |
| ut_assertok(check_arg(uts, 6, "arg=1", buf, "arg=123", "arg", "1")); |
| ut_assertok(check_arg(uts, 9, "arg=1234", buf, "arg=123", "arg", |
| "1234")); |
| |
| /* update an arg at the end */ |
| ut_assertok(check_arg(uts, 5, "mary", buf, "mary arg=123", "arg", |
| NULL)); |
| ut_assertok(check_arg(uts, 9, "mary arg", buf, "mary arg=123", "arg", |
| BOOTFLOWCL_EMPTY)); |
| ut_assertok(check_arg(uts, 10, "mary arg=", buf, "mary arg=123", "arg", |
| "")); |
| ut_assertok(check_arg(uts, 11, "mary arg=1", buf, "mary arg=123", "arg", |
| "1")); |
| ut_assertok(check_arg(uts, 14, "mary arg=1234", buf, "mary arg=123", |
| "arg", "1234")); |
| |
| /* update an arg in the middle */ |
| ut_assertok(check_arg(uts, 16, "mary=abc john=2", buf, |
| "mary=abc arg=123 john=2", "arg", NULL)); |
| ut_assertok(check_arg(uts, 20, "mary=abc arg john=2", buf, |
| "mary=abc arg=123 john=2", "arg", |
| BOOTFLOWCL_EMPTY)); |
| ut_assertok(check_arg(uts, 21, "mary=abc arg= john=2", buf, |
| "mary=abc arg=123 john=2", "arg", "")); |
| ut_assertok(check_arg(uts, 22, "mary=abc arg=1 john=2", buf, |
| "mary=abc arg=123 john=2", "arg", "1")); |
| ut_assertok(check_arg(uts, 25, "mary=abc arg=1234 john=2", buf, |
| "mary=abc arg=123 john=2", "arg", "1234")); |
| |
| /* handle existing args with quotes */ |
| ut_assertok(check_arg(uts, 16, "mary=\"abc\" john", buf, |
| "mary=\"abc\" arg=123 john", "arg", NULL)); |
| |
| /* handle existing args with quoted spaces */ |
| ut_assertok(check_arg(uts, 20, "mary=\"abc def\" john", buf, |
| "mary=\"abc def\" arg=123 john", "arg", NULL)); |
| |
| ut_assertok(check_arg(uts, 34, "mary=\"abc def\" arg=123 john def=4", |
| buf, "mary=\"abc def\" arg=123 john", "def", |
| "4")); |
| |
| /* quote at the start */ |
| ut_asserteq(-EBADF, cmdline_set_arg(buf, size, |
| "mary=\"abc def\" arg=\"123 456\"", |
| "arg", "\"4 5 6", NULL)); |
| |
| /* quote at the end */ |
| ut_asserteq(-EBADF, cmdline_set_arg(buf, size, |
| "mary=\"abc def\" arg=\"123 456\"", |
| "arg", "4 5 6\"", NULL)); |
| |
| /* quote in the middle */ |
| ut_asserteq(-EBADF, cmdline_set_arg(buf, size, |
| "mary=\"abc def\" arg=\"123 456\"", |
| "arg", "\"4 \"5 6\"", NULL)); |
| |
| /* handle updating a quoted arg */ |
| ut_assertok(check_arg(uts, 27, "mary=\"abc def\" arg=\"4 5 6\"", buf, |
| "mary=\"abc def\" arg=\"123 456\"", "arg", |
| "4 5 6")); |
| |
| /* changing a quoted arg to a non-quoted arg */ |
| ut_assertok(check_arg(uts, 23, "mary=\"abc def\" arg=789", buf, |
| "mary=\"abc def\" arg=\"123 456\"", "arg", |
| "789")); |
| |
| /* changing a non-quoted arg to a quoted arg */ |
| ut_assertok(check_arg(uts, 29, "mary=\"abc def\" arg=\"456 789\"", buf, |
| "mary=\"abc def\" arg=123", "arg", "456 789")); |
| |
| /* handling of spaces */ |
| ut_assertok(check_arg(uts, 8, "arg=123", buf, " ", "arg", "123")); |
| ut_assertok(check_arg(uts, 8, "arg=123", buf, " ", "arg", "123")); |
| ut_assertok(check_arg(uts, 13, "john arg=123", buf, " john ", "arg", |
| "123")); |
| ut_assertok(check_arg(uts, 13, "john arg=123", buf, " john arg=123 ", |
| "arg", "123")); |
| ut_assertok(check_arg(uts, 18, "john arg=123 mary", buf, |
| " john arg=123 mary ", "arg", "123")); |
| |
| /* unchanged arg */ |
| ut_assertok(check_arg(uts, 3, "me", buf, "me", "me", BOOTFLOWCL_EMPTY)); |
| |
| /* arg which starts with the same name */ |
| ut_assertok(check_arg(uts, 28, "mary=abc johnathon=2 john=3", buf, |
| "mary=abc johnathon=2 john=1", "john", "3")); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(test_bootflow_cmdline_set, 0); |
| |
| /* Test of bootflow_cmdline_set_arg() */ |
| static int bootflow_set_arg(struct unit_test_state *uts) |
| { |
| struct bootflow s_bflow, *bflow = &s_bflow; |
| ulong mem_start; |
| |
| ut_assertok(env_set("bootargs", NULL)); |
| |
| mem_start = ut_check_delta(0); |
| |
| /* Do a simple sanity check. Rely on bootflow_cmdline() for the rest */ |
| bflow->cmdline = NULL; |
| ut_assertok(bootflow_cmdline_set_arg(bflow, "fred", "123", false)); |
| ut_asserteq_str(bflow->cmdline, "fred=123"); |
| |
| ut_assertok(bootflow_cmdline_set_arg(bflow, "mary", "and here", false)); |
| ut_asserteq_str(bflow->cmdline, "fred=123 mary=\"and here\""); |
| |
| ut_assertok(bootflow_cmdline_set_arg(bflow, "mary", NULL, false)); |
| ut_asserteq_str(bflow->cmdline, "fred=123"); |
| ut_assertok(bootflow_cmdline_set_arg(bflow, "fred", NULL, false)); |
| ut_asserteq_ptr(bflow->cmdline, NULL); |
| |
| ut_asserteq(0, ut_check_delta(mem_start)); |
| |
| ut_assertok(bootflow_cmdline_set_arg(bflow, "mary", "here", true)); |
| ut_asserteq_str("mary=here", env_get("bootargs")); |
| ut_assertok(env_set("bootargs", NULL)); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_set_arg, 0); |
| |
| /* Test of bootflow_cmdline_get_arg() */ |
| static int bootflow_cmdline_get(struct unit_test_state *uts) |
| { |
| int pos; |
| |
| /* empty string */ |
| ut_asserteq(-ENOENT, cmdline_get_arg("", "fred", &pos)); |
| |
| /* arg with empty value */ |
| ut_asserteq(0, cmdline_get_arg("fred= mary", "fred", &pos)); |
| ut_asserteq(5, pos); |
| |
| /* arg with a value */ |
| ut_asserteq(2, cmdline_get_arg("fred=23", "fred", &pos)); |
| ut_asserteq(5, pos); |
| |
| /* arg with a value */ |
| ut_asserteq(3, cmdline_get_arg("mary=1 fred=234", "fred", &pos)); |
| ut_asserteq(12, pos); |
| |
| /* arg with a value, after quoted arg */ |
| ut_asserteq(3, cmdline_get_arg("mary=\"1 2\" fred=234", "fred", &pos)); |
| ut_asserteq(16, pos); |
| |
| /* arg in the middle */ |
| ut_asserteq(0, cmdline_get_arg("mary=\"1 2\" fred john=23", "fred", |
| &pos)); |
| ut_asserteq(15, pos); |
| |
| /* quoted arg */ |
| ut_asserteq(3, cmdline_get_arg("mary=\"1 2\" fred=\"3 4\" john=23", |
| "fred", &pos)); |
| ut_asserteq(17, pos); |
| |
| /* args starting with the same prefix */ |
| ut_asserteq(1, cmdline_get_arg("mary=abc johnathon=3 john=1", "john", |
| &pos)); |
| ut_asserteq(26, pos); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmdline_get, 0); |
| |
| static int bootflow_cmdline(struct unit_test_state *uts) |
| { |
| ut_assertok(run_command("bootflow scan mmc", 0)); |
| ut_assertok(run_command("bootflow sel 0", 0)); |
| console_record_reset_enable(); |
| |
| ut_asserteq(1, run_command("bootflow cmdline get fred", 0)); |
| ut_assert_nextline("Argument not found"); |
| ut_assert_console_end(); |
| |
| ut_asserteq(0, run_command("bootflow cmdline set fred 123", 0)); |
| ut_asserteq(0, run_command("bootflow cmdline get fred", 0)); |
| ut_assert_nextline("123"); |
| |
| ut_asserteq(0, run_command("bootflow cmdline set mary abc", 0)); |
| ut_asserteq(0, run_command("bootflow cmdline get mary", 0)); |
| ut_assert_nextline("abc"); |
| |
| ut_asserteq(0, run_command("bootflow cmdline delete fred", 0)); |
| ut_asserteq(1, run_command("bootflow cmdline get fred", 0)); |
| ut_assert_nextline("Argument not found"); |
| |
| ut_asserteq(0, run_command("bootflow cmdline clear mary", 0)); |
| ut_asserteq(0, run_command("bootflow cmdline get mary", 0)); |
| ut_assert_nextline_empty(); |
| |
| ut_assert_console_end(); |
| |
| return 0; |
| } |
| BOOTSTD_TEST(bootflow_cmdline, 0); |