| /* |
| * (C) Copyright 2011 |
| * Jason Cooper <u-boot@lakedaemon.net> |
| * |
| * Based on work by: |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Siddarth Gore <gores@marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _CONFIG_DS109_H |
| #define _CONFIG_DS109_H |
| |
| /* Provide the MACH_TYPE value that the vendor kernel requires. */ |
| #define CONFIG_MACH_TYPE 527 |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ |
| |
| /* |
| * Commands configuration |
| */ |
| #define CONFIG_CMD_EXT2 |
| |
| /* |
| * mv-plug-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-plug-common.h" |
| |
| /* |
| * Environment variables configurations |
| */ |
| #ifdef CONFIG_SPI_FLASH |
| #define CONFIG_ENV_IS_IN_SPI_FLASH 1 |
| #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ |
| #endif |
| |
| #ifdef CONFIG_CMD_SF |
| #define CONFIG_HARD_SPI 1 |
| #define CONFIG_KIRKWOOD_SPI 1 |
| #define CONFIG_ENV_SPI_BUS 0 |
| #define CONFIG_ENV_SPI_CS 0 |
| #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ |
| #endif |
| |
| /* |
| * max 4k env size is enough, but in case of nand |
| * it has to be rounded to sector size |
| */ |
| #define CONFIG_ENV_SIZE 0x10000 |
| #define CONFIG_ENV_ADDR 0x3d0000 |
| #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ |
| |
| /* |
| * Default environment variables |
| */ |
| #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ |
| "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ |
| "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ |
| "bootm 0x6400000;" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "x_bootcmd_ethernet=ping 192.168.1.2\0" \ |
| "x_bootcmd_usb=usb start\0" \ |
| "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ |
| "x_bootargs=console=ttyS0,115200\0" \ |
| "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ |
| "ipaddr=192.168.1.5\0" |
| |
| /* |
| * Ethernet Driver configuration |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ |
| #define CONFIG_PHY_BASE_ADR 8 |
| #endif /* CONFIG_CMD_NET */ |
| |
| /* |
| * SATA Driver configuration |
| */ |
| #ifdef CONFIG_MVSATA_IDE |
| #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| #endif /*CONFIG_MVSATA_IDE*/ |
| |
| #endif /* _CONFIG_DS109_H */ |