| /* |
| * Aries MA5D4 configuration |
| * Copyright (C) 2015 Marek Vasut <marex@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __MA5D4EVK_CONFIG_H__ |
| #define __MA5D4EVK_CONFIG_H__ |
| |
| #define CONFIG_TIMESTAMP /* Print image info with timestamp */ |
| |
| #include "at91-sama5_common.h" |
| #undef CONFIG_BOOTARGS |
| #define CONFIG_SYS_USE_SERIALFLASH 1 |
| #define CONFIG_BOARD_LATE_INIT |
| |
| /* |
| * Memory configurations |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 |
| #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS |
| #define CONFIG_SYS_SDRAM_SIZE 0x10000000 |
| |
| #ifdef CONFIG_SPL_BUILD |
| #define CONFIG_SYS_INIT_SP_ADDR 0x210000 |
| #else |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) |
| #endif |
| |
| /* |
| * Environment |
| */ |
| #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
| #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE |
| #define CONFIG_ENV_SIZE 0x4000 |
| #define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */ |
| #define CONFIG_ENV_OFFSET 512 /* just after the MBR */ |
| |
| /* |
| * U-Boot general configurations |
| */ |
| |
| /* |
| * Serial Driver |
| */ |
| #define CONFIG_ATMEL_USART |
| #define CONFIG_USART_BASE ATMEL_BASE_USART0 |
| #define CONFIG_USART_ID ATMEL_ID_USART0 |
| |
| /* |
| * Ethernet |
| */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_MACB |
| #define CONFIG_RMII |
| #define CONFIG_NET_RETRY_COUNT 20 |
| #define CONFIG_MACB_SEARCH_PHY |
| #define CONFIG_ARP_TIMEOUT 200UL |
| #define CONFIG_IP_DEFRAG |
| #endif |
| |
| /* |
| * LCD |
| */ |
| #ifdef CONFIG_LCD |
| #define CONFIG_BMP_16BPP |
| #define CONFIG_BMP_24BPP |
| #define CONFIG_BMP_32BPP |
| #define LCD_BPP LCD_COLOR16 |
| #define LCD_OUTPUT_BPP 24 |
| #define CONFIG_ATMEL_HLCD |
| #endif |
| |
| /* |
| * SD/MMC |
| */ |
| #ifdef CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_ATMEL_MCI |
| #endif |
| |
| /* |
| * SPI NOR (boot memory) |
| */ |
| #ifdef CONFIG_CMD_SF |
| #define CONFIG_ATMEL_SPI |
| #define CONFIG_ATMEL_SPI0 |
| #define CONFIG_SPI_FLASH_ATMEL |
| #define CONFIG_SF_DEFAULT_BUS 0 |
| #define CONFIG_SF_DEFAULT_CS 0 |
| #define CONFIG_SF_DEFAULT_SPEED 30000000 |
| #endif |
| |
| /* |
| * USB |
| */ |
| #ifdef CONFIG_CMD_USB |
| #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 |
| |
| /* USB device */ |
| #define CONFIG_USB_ETHER |
| #define CONFIG_USB_ETH_RNDIS |
| #define CONFIG_USBNET_MANUFACTURER "AriesEmbedded" |
| #define CONFIG_USB_FUNCTION_MASS_STORAGE |
| #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024) |
| #define DFU_DEFAULT_POLL_TIMEOUT 300 |
| #endif |
| |
| /* |
| * Boot Linux |
| */ |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_INITRD_TAG |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_BOOTFILE "fitImage" |
| #define CONFIG_BOOTARGS "console=ttyS3,115200" |
| #define CONFIG_LOADADDR 0x20800000 |
| #define CONFIG_BOOTCOMMAND "run mmc_mmc" |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| |
| /* |
| * Extra Environments |
| */ |
| #define CONFIG_PREBOOT "run try_bootscript" |
| #define CONFIG_HOSTNAME ma5d4evk |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "consdev=ttyS3\0" \ |
| "baudrate=115200\0" \ |
| "bootscript=boot.scr\0" \ |
| "bootdev=/dev/mmcblk0p1\0" \ |
| "bootpart=0:1\0" \ |
| "rootdev=/dev/mmcblk0p2\0" \ |
| "netdev=eth0\0" \ |
| "dfu_alt_info=mmc raw 0 3867148288\0" \ |
| "kernel_addr_r=0x22000000\0" \ |
| "update_spi_firmware_spl_addr=0x21000000\0" \ |
| "update_spi_firmware_spl_filename=boot.bin\0" \ |
| "update_spi_firmware_addr=0x22000000\0" \ |
| "update_spi_firmware_filename=u-boot.img\0" \ |
| "update_spi_firmware=" /* Update the SPI flash firmware */ \ |
| "if sf probe ; then " \ |
| "if tftp ${update_spi_firmware_spl_addr} " \ |
| "${update_spi_firmware_spl_filename} ; then " \ |
| "setenv update_spi_firmware_spl_filesize ${filesize} ; "\ |
| "if tftp ${update_spi_firmware_addr} " \ |
| "${update_spi_firmware_filename} ; then " \ |
| "setenv update_spi_firmware_filesize ${filesize} ; " \ |
| "sf update ${update_spi_firmware_spl_addr} 0x0 " \ |
| "${update_spi_firmware_spl_filesize} ; " \ |
| "sf update ${update_spi_firmware_addr} 0x10000 " \ |
| "${update_spi_firmware_filesize} ; " \ |
| "fi ; " \ |
| "fi ; " \ |
| "fi\0" \ |
| "addcons=" \ |
| "setenv bootargs ${bootargs} " \ |
| "console=${consdev},${baudrate}\0" \ |
| "addip=" \ |
| "setenv bootargs ${bootargs} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:" \ |
| "${netmask}:${hostname}:${netdev}:off\0" \ |
| "addmisc=" \ |
| "setenv bootargs ${bootargs} ${miscargs}\0" \ |
| "addargs=run addcons addmisc\0" \ |
| "mmcload=" \ |
| "mmc rescan ; " \ |
| "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \ |
| "netload=" \ |
| "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ |
| "miscargs=nohlt panic=1\0" \ |
| "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ |
| "nfsargs=" \ |
| "setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ |
| "fdtimg=if test ${bootmode} = \"sf\" ; then " \ |
| "setenv kernel_fdt 1 ; " \ |
| "else ; " \ |
| "setenv kernel_fdt 2 ; " \ |
| "fi\0" \ |
| "mmc_mmc=" \ |
| "run fdtimg mmcload mmcargs addargs ; " \ |
| "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \ |
| "mmc_nfs=" \ |
| "run fdtimg mmcload nfsargs addip addargs ; " \ |
| "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \ |
| "net_mmc=" \ |
| "run fdtimg netload mmcargs addargs ; " \ |
| "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \ |
| "net_nfs=" \ |
| "run fdtimg netload nfsargs addip addargs ; " \ |
| "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \ |
| "try_bootscript=" \ |
| "mmc rescan;" \ |
| "if test -e mmc 1:1 ${bootscript} ; then " \ |
| "if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \ |
| "then ; " \ |
| "echo Running bootscript... ; " \ |
| "source ${kernel_addr_r} ; " \ |
| "fi ; " \ |
| "fi\0" |
| /* SPL */ |
| #define CONFIG_SPL_FRAMEWORK |
| #define CONFIG_SPL_TEXT_BASE 0x200000 |
| #define CONFIG_SPL_MAX_SIZE 0x10000 |
| #define CONFIG_SPL_BSS_START_ADDR 0x20000000 |
| #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 |
| #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 |
| #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 |
| |
| #define CONFIG_SYS_MONITOR_LEN (512 << 10) |
| |
| #define CONFIG_SPL_SPI_LOAD |
| #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 |
| |
| #define CONFIG_SYS_USE_MMC |
| #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds |
| #define CONFIG_SPL_MMC_SUPPORT |
| #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 |
| #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 |
| #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" |
| #define CONFIG_SPL_FAT_SUPPORT |
| #define CONFIG_SPL_LIBDISK_SUPPORT |
| |
| #endif /* __MA5D4EVK_CONFIG_H__ */ |