| CONFIG_ARM=y |
| CONFIG_SKIP_LOWLEVEL_INIT=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_ARCH_MVEBU=y |
| CONFIG_SYS_TEXT_BASE=0x00800000 |
| CONFIG_SPL_GPIO=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_TARGET_CONTROLCENTERDC=y |
| CONFIG_ENV_SIZE=0x10000 |
| CONFIG_ENV_OFFSET=0x100000 |
| CONFIG_ENV_SECT_SIZE=0x40000 |
| CONFIG_DM_GPIO=y |
| CONFIG_DEFAULT_DEVICE_TREE="armada-38x-controlcenterdc" |
| CONFIG_SPL_TEXT_BASE=0x40000030 |
| CONFIG_SPL_SERIAL=y |
| CONFIG_SPL=y |
| CONFIG_DEBUG_UART_BASE=0xf1012000 |
| CONFIG_DEBUG_UART_CLOCK=250000000 |
| CONFIG_SYS_LOAD_ADDR=0x800000 |
| CONFIG_DEBUG_UART=y |
| CONFIG_AHCI=y |
| CONFIG_OF_BOARD_FIXUP=y |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000 |
| CONFIG_FIT=y |
| CONFIG_FIT_SIGNATURE=y |
| CONFIG_FIT_VERBOSE=y |
| CONFIG_USE_BOOTCOMMAND=y |
| CONFIG_BOOTCOMMAND="if env exists keyprogram; then; setenv keyprogram; run nfsboot; fi; run dobootfail" |
| CONFIG_USE_PREBOOT=y |
| CONFIG_SYS_CONSOLE_INFO_QUIET=y |
| CONFIG_DISPLAY_BOARDINFO_LATE=y |
| CONFIG_BOARD_LATE_INIT=y |
| CONFIG_LAST_STAGE_INIT=y |
| CONFIG_SPL_MAX_SIZE=0x27fd0 |
| CONFIG_SPL_BSS_MAX_SIZE=0x4000 |
| CONFIG_SPL_BOARD_INIT=y |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_STACK=0x40031000 |
| CONFIG_SPL_I2C=y |
| CONFIG_HUSH_PARSER=y |
| CONFIG_SYS_MAXARGS=32 |
| # CONFIG_CMD_ELF is not set |
| # CONFIG_CMD_GO is not set |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_PCI=y |
| CONFIG_CMD_SPI=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_DHCP=y |
| CONFIG_CMD_PING=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_TIME=y |
| CONFIG_CMD_TPM=y |
| CONFIG_CMD_EXT2=y |
| CONFIG_CMD_EXT4=y |
| CONFIG_EFI_PARTITION=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_SPI_MAX_HZ=50000000 |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_USE_BOOTFILE=y |
| CONFIG_BOOTFILE="ccdc.img" |
| CONFIG_ARP_TIMEOUT=200 |
| CONFIG_NET_RETRY_COUNT=50 |
| CONFIG_SPL_OF_TRANSLATE=y |
| CONFIG_SCSI_AHCI=y |
| CONFIG_DM_PCA953X=y |
| CONFIG_DM_I2C=y |
| CONFIG_SYS_I2C_MVTWSI=y |
| CONFIG_LED=y |
| CONFIG_LED_GPIO=y |
| CONFIG_MMC_SDHCI=y |
| CONFIG_MMC_SDHCI_MV=y |
| CONFIG_SF_DEFAULT_BUS=1 |
| CONFIG_SPI_FLASH_STMICRO=y |
| CONFIG_BITBANGMII=y |
| CONFIG_BITBANGMII_MULTI=y |
| CONFIG_PHY_MARVELL=y |
| CONFIG_PHY_GIGE=y |
| CONFIG_MVNETA=y |
| CONFIG_MII=y |
| CONFIG_MVMDIO=y |
| CONFIG_PCI=y |
| CONFIG_DM_PCI_COMPAT=y |
| CONFIG_PCI_MVEBU=y |
| CONFIG_SCSI=y |
| CONFIG_SCSI_AHCI_PLAT=y |
| CONFIG_SYS_SCSI_MAX_SCSI_ID=2 |
| CONFIG_SPL_DEBUG_UART_BASE=0xd0012000 |
| CONFIG_DEBUG_UART_SHIFT=2 |
| CONFIG_SYS_NS16550=y |
| CONFIG_KIRKWOOD_SPI=y |
| CONFIG_TPM_ATMEL_TWI=y |
| CONFIG_TPM_AUTH_SESSIONS=y |
| CONFIG_TPM_FLUSH_RESOURCES=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_STORAGE=y |
| CONFIG_TPM=y |
| # CONFIG_EFI_LOADER is not set |