| /* |
| * (C) Copyright 2007 |
| * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __FDT_SUPPORT_H |
| #define __FDT_SUPPORT_H |
| |
| #ifdef CONFIG_OF_LIBFDT |
| |
| #include <libfdt.h> |
| |
| u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, |
| const char *prop, const u32 dflt); |
| u32 fdt_getprop_u32_default(const void *fdt, const char *path, |
| const char *prop, const u32 dflt); |
| int fdt_chosen(void *fdt); |
| int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); |
| void do_fixup_by_path(void *fdt, const char *path, const char *prop, |
| const void *val, int len, int create); |
| void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, |
| u32 val, int create); |
| |
| static inline void do_fixup_by_path_string(void *fdt, const char *path, |
| const char *prop, const char *status) |
| { |
| do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1); |
| } |
| |
| void do_fixup_by_prop(void *fdt, |
| const char *pname, const void *pval, int plen, |
| const char *prop, const void *val, int len, |
| int create); |
| void do_fixup_by_prop_u32(void *fdt, |
| const char *pname, const void *pval, int plen, |
| const char *prop, u32 val, int create); |
| void do_fixup_by_compat(void *fdt, const char *compat, |
| const char *prop, const void *val, int len, int create); |
| void do_fixup_by_compat_u32(void *fdt, const char *compat, |
| const char *prop, u32 val, int create); |
| int fdt_fixup_memory(void *blob, u64 start, u64 size); |
| int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); |
| void fdt_fixup_ethernet(void *fdt); |
| int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, |
| const void *val, int len, int create); |
| void fdt_fixup_qe_firmware(void *fdt); |
| |
| #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) |
| void fdt_fixup_dr_usb(void *blob, bd_t *bd); |
| #else |
| static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} |
| #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ |
| |
| #if defined(CONFIG_SYS_FSL_SEC_COMPAT) |
| void fdt_fixup_crypto_node(void *blob, int sec_rev); |
| #else |
| static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} |
| #endif |
| |
| #ifdef CONFIG_PCI |
| #include <pci.h> |
| int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); |
| #endif |
| |
| void ft_board_setup(void *blob, bd_t *bd); |
| /* |
| * The keystone2 SOC requires all 32 bit aliased addresses to be converted |
| * to their 36 physical format. This has to happen after all fdt nodes |
| * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex() |
| * called at the end of the image_setup_libfdt() is to do that convertion. |
| */ |
| void ft_board_setup_ex(void *blob, bd_t *bd); |
| void ft_cpu_setup(void *blob, bd_t *bd); |
| void ft_pci_setup(void *blob, bd_t *bd); |
| |
| void set_working_fdt_addr(void *addr); |
| int fdt_shrink_to_minimum(void *blob); |
| int fdt_increase_size(void *fdt, int add_len); |
| |
| int fdt_fixup_nor_flash_size(void *blob); |
| |
| void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); |
| void fdt_del_node_and_alias(void *blob, const char *alias); |
| u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr); |
| int fdt_node_offset_by_compat_reg(void *blob, const char *compat, |
| phys_addr_t compat_off); |
| int fdt_alloc_phandle(void *blob); |
| int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); |
| unsigned int fdt_create_phandle(void *fdt, int nodeoffset); |
| int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); |
| |
| int fdt_verify_alias_address(void *fdt, int anode, const char *alias, |
| u64 addr); |
| u64 fdt_get_base_address(void *fdt, int node); |
| int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr, |
| uint64_t *addr, uint64_t *len); |
| |
| enum fdt_status { |
| FDT_STATUS_OKAY, |
| FDT_STATUS_DISABLED, |
| FDT_STATUS_FAIL, |
| FDT_STATUS_FAIL_ERROR_CODE, |
| }; |
| int fdt_set_node_status(void *fdt, int nodeoffset, |
| enum fdt_status status, unsigned int error_code); |
| static inline int fdt_status_okay(void *fdt, int nodeoffset) |
| { |
| return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0); |
| } |
| static inline int fdt_status_disabled(void *fdt, int nodeoffset) |
| { |
| return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); |
| } |
| static inline int fdt_status_fail(void *fdt, int nodeoffset) |
| { |
| return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); |
| } |
| |
| int fdt_set_status_by_alias(void *fdt, const char *alias, |
| enum fdt_status status, unsigned int error_code); |
| static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) |
| { |
| return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); |
| } |
| static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) |
| { |
| return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); |
| } |
| static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) |
| { |
| return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); |
| } |
| |
| /* Helper to read a big number; size is in cells (not bytes) */ |
| static inline u64 of_read_number(const fdt32_t *cell, int size) |
| { |
| u64 r = 0; |
| while (size--) |
| r = (r << 32) | fdt32_to_cpu(*(cell++)); |
| return r; |
| } |
| |
| void of_bus_default_count_cells(void *blob, int parentoffset, |
| int *addrc, int *sizec); |
| int ft_verify_fdt(void *fdt); |
| int arch_fixup_memory_node(void *blob); |
| |
| int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, |
| u32 height, u32 stride, const char *format); |
| |
| #endif /* ifdef CONFIG_OF_LIBFDT */ |
| |
| #ifdef USE_HOSTCC |
| int fdtdec_get_int(const void *blob, int node, const char *prop_name, |
| int default_val); |
| #endif |
| #endif /* ifndef __FDT_SUPPORT_H */ |