blob: 9bee7bdc6b0e9b8deeb21b15647ff48a8e88156d [file] [log] [blame]
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Add to readline cmdline-editing by
* (C) Copyright 2005
* JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* #define DEBUG */
#include <common.h>
#include <command.h>
#include <fdtdec.h>
#include <hush.h>
#include <malloc.h>
#include <menu.h>
#include <post.h>
#include <version.h>
#include <watchdog.h>
#include <linux/ctype.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Board-specific Platform code can reimplement show_boot_progress () if needed
*/
void inline __show_boot_progress (int val) {}
void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
#define MAX_DELAY_STOP_STR 32
#define DEBUG_PARSER 0 /* set to 1 to debug */
#define debug_parser(fmt, args...) \
debug_cond(DEBUG_PARSER, fmt, ##args)
#ifndef DEBUG_BOOTKEYS
#define DEBUG_BOOTKEYS 0
#endif
#define debug_bootkeys(fmt, args...) \
debug_cond(DEBUG_BOOTKEYS, fmt, ##args)
char console_buffer[CONFIG_SYS_CBSIZE + 1]; /* console I/O buffer */
static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
static const char erase_seq[] = "\b \b"; /* erase sequence */
static const char tab_seq[] = " "; /* used to expand TABs */
#ifdef CONFIG_BOOT_RETRY_TIME
static uint64_t endtime = 0; /* must be set, default is instant timeout */
static int retry_time = -1; /* -1 so can call readline before main_loop */
#endif
#define endtick(seconds) (get_ticks() + (uint64_t)(seconds) * get_tbclk())
#ifndef CONFIG_BOOT_RETRY_MIN
#define CONFIG_BOOT_RETRY_MIN CONFIG_BOOT_RETRY_TIME
#endif
#ifdef CONFIG_MODEM_SUPPORT
int do_mdm_init = 0;
extern void mdm_init(void); /* defined in board.c */
#endif
/***************************************************************************
* Watch for 'delay' seconds for autoboot stop or autoboot delay string.
* returns: 0 - no key string, allow autoboot 1 - got key string, abort
*/
#if defined(CONFIG_BOOTDELAY)
# if defined(CONFIG_AUTOBOOT_KEYED)
static int abortboot_keyed(int bootdelay)
{
int abort = 0;
uint64_t etime = endtick(bootdelay);
struct {
char* str;
u_int len;
int retry;
}
delaykey [] = {
{ str: getenv ("bootdelaykey"), retry: 1 },
{ str: getenv ("bootdelaykey2"), retry: 1 },
{ str: getenv ("bootstopkey"), retry: 0 },
{ str: getenv ("bootstopkey2"), retry: 0 },
};
char presskey [MAX_DELAY_STOP_STR];
u_int presskey_len = 0;
u_int presskey_max = 0;
u_int i;
#ifndef CONFIG_ZERO_BOOTDELAY_CHECK
if (bootdelay == 0)
return 0;
#endif
# ifdef CONFIG_AUTOBOOT_PROMPT
printf(CONFIG_AUTOBOOT_PROMPT);
# endif
# ifdef CONFIG_AUTOBOOT_DELAY_STR
if (delaykey[0].str == NULL)
delaykey[0].str = CONFIG_AUTOBOOT_DELAY_STR;
# endif
# ifdef CONFIG_AUTOBOOT_DELAY_STR2
if (delaykey[1].str == NULL)
delaykey[1].str = CONFIG_AUTOBOOT_DELAY_STR2;
# endif
# ifdef CONFIG_AUTOBOOT_STOP_STR
if (delaykey[2].str == NULL)
delaykey[2].str = CONFIG_AUTOBOOT_STOP_STR;
# endif
# ifdef CONFIG_AUTOBOOT_STOP_STR2
if (delaykey[3].str == NULL)
delaykey[3].str = CONFIG_AUTOBOOT_STOP_STR2;
# endif
for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) {
delaykey[i].len = delaykey[i].str == NULL ?
0 : strlen (delaykey[i].str);
delaykey[i].len = delaykey[i].len > MAX_DELAY_STOP_STR ?
MAX_DELAY_STOP_STR : delaykey[i].len;
presskey_max = presskey_max > delaykey[i].len ?
presskey_max : delaykey[i].len;
debug_bootkeys("%s key:<%s>\n",
delaykey[i].retry ? "delay" : "stop",
delaykey[i].str ? delaykey[i].str : "NULL");
}
/* In order to keep up with incoming data, check timeout only
* when catch up.
*/
do {
if (tstc()) {
if (presskey_len < presskey_max) {
presskey [presskey_len ++] = getc();
}
else {
for (i = 0; i < presskey_max - 1; i ++)
presskey [i] = presskey [i + 1];
presskey [i] = getc();
}
}
for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) {
if (delaykey[i].len > 0 &&
presskey_len >= delaykey[i].len &&
memcmp (presskey + presskey_len - delaykey[i].len,
delaykey[i].str,
delaykey[i].len) == 0) {
debug_bootkeys("got %skey\n",
delaykey[i].retry ? "delay" :
"stop");
# ifdef CONFIG_BOOT_RETRY_TIME
/* don't retry auto boot */
if (! delaykey[i].retry)
retry_time = -1;
# endif
abort = 1;
}
}
} while (!abort && get_ticks() <= etime);
if (!abort)
debug_bootkeys("key timeout\n");
#ifdef CONFIG_SILENT_CONSOLE
if (abort)
gd->flags &= ~GD_FLG_SILENT;
#endif
return abort;
}
# else /* !defined(CONFIG_AUTOBOOT_KEYED) */
#ifdef CONFIG_MENUKEY
static int menukey = 0;
#endif
static int abortboot_normal(int bootdelay)
{
int abort = 0;
unsigned long ts;
#ifdef CONFIG_MENUPROMPT
printf(CONFIG_MENUPROMPT);
#else
if (bootdelay >= 0)
printf("Hit any key to stop autoboot: %2d ", bootdelay);
#endif
#if defined CONFIG_ZERO_BOOTDELAY_CHECK
/*
* Check if key already pressed
* Don't check if bootdelay < 0
*/
if (bootdelay >= 0) {
if (tstc()) { /* we got a key press */
(void) getc(); /* consume input */
puts ("\b\b\b 0");
abort = 1; /* don't auto boot */
}
}
#endif
while ((bootdelay > 0) && (!abort)) {
--bootdelay;
/* delay 1000 ms */
ts = get_timer(0);
do {
if (tstc()) { /* we got a key press */
abort = 1; /* don't auto boot */
bootdelay = 0; /* no more delay */
# ifdef CONFIG_MENUKEY
menukey = getc();
# else
(void) getc(); /* consume input */
# endif
break;
}
udelay(10000);
} while (!abort && get_timer(ts) < 1000);
printf("\b\b\b%2d ", bootdelay);
}
putc('\n');
#ifdef CONFIG_SILENT_CONSOLE
if (abort)
gd->flags &= ~GD_FLG_SILENT;
#endif
return abort;
}
# endif /* CONFIG_AUTOBOOT_KEYED */
static int abortboot(int bootdelay)
{
#ifdef CONFIG_AUTOBOOT_KEYED
return abortboot_keyed(bootdelay);
#else
return abortboot_normal(bootdelay);
#endif
}
#endif /* CONFIG_BOOTDELAY */
/*
* Runs the given boot command securely. Specifically:
* - Doesn't run the command with the shell (run_command or parse_string_outer),
* since that's a lot of code surface that an attacker might exploit.
* Because of this, we don't do any argument parsing--the secure boot command
* has to be a full-fledged u-boot command.
* - Doesn't check for keypresses before booting, since that could be a
* security hole; also disables Ctrl-C.
* - Doesn't allow the command to return.
*
* Upon any failures, this function will drop into an infinite loop after
* printing the error message to console.
*/
#if defined(CONFIG_BOOTDELAY) && defined(CONFIG_OF_CONTROL)
static void secure_boot_cmd(char *cmd)
{
cmd_tbl_t *cmdtp;
int rc;
if (!cmd) {
printf("## Error: Secure boot command not specified\n");
goto err;
}
/* Disable Ctrl-C just in case some command is used that checks it. */
disable_ctrlc(1);
/* Find the command directly. */
cmdtp = find_cmd(cmd);
if (!cmdtp) {
printf("## Error: \"%s\" not defined\n", cmd);
goto err;
}
/* Run the command, forcing no flags and faking argc and argv. */
rc = (cmdtp->cmd)(cmdtp, 0, 1, &cmd);
/* Shouldn't ever return from boot command. */
printf("## Error: \"%s\" returned (code %d)\n", cmd, rc);
err:
/*
* Not a whole lot to do here. Rebooting won't help much, since we'll
* just end up right back here. Just loop.
*/
hang();
}
static void process_fdt_options(const void *blob)
{
ulong addr;
/* Add an env variable to point to a kernel payload, if available */
addr = fdtdec_get_config_int(gd->fdt_blob, "kernel-offset", 0);
if (addr)
setenv_addr("kernaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr));
/* Add an env variable to point to a root disk, if available */
addr = fdtdec_get_config_int(gd->fdt_blob, "rootdisk-offset", 0);
if (addr)
setenv_addr("rootaddr", (void *)(CONFIG_SYS_TEXT_BASE + addr));
}
#endif /* CONFIG_OF_CONTROL */
#ifdef CONFIG_BOOTDELAY
static void process_boot_delay(void)
{
#ifdef CONFIG_OF_CONTROL
char *env;
#endif
char *s;
int bootdelay;
#ifdef CONFIG_BOOTCOUNT_LIMIT
unsigned long bootcount = 0;
unsigned long bootlimit = 0;
#endif /* CONFIG_BOOTCOUNT_LIMIT */
#ifdef CONFIG_BOOTCOUNT_LIMIT
bootcount = bootcount_load();
bootcount++;
bootcount_store (bootcount);
setenv_ulong("bootcount", bootcount);
bootlimit = getenv_ulong("bootlimit", 10, 0);
#endif /* CONFIG_BOOTCOUNT_LIMIT */
s = getenv ("bootdelay");
bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
#ifdef CONFIG_OF_CONTROL
bootdelay = fdtdec_get_config_int(gd->fdt_blob, "bootdelay",
bootdelay);
#endif
debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
#if defined(CONFIG_MENU_SHOW)
bootdelay = menu_show(bootdelay);
#endif
# ifdef CONFIG_BOOT_RETRY_TIME
init_cmd_timeout ();
# endif /* CONFIG_BOOT_RETRY_TIME */
#ifdef CONFIG_POST
if (gd->flags & GD_FLG_POSTFAIL) {
s = getenv("failbootcmd");
}
else
#endif /* CONFIG_POST */
#ifdef CONFIG_BOOTCOUNT_LIMIT
if (bootlimit && (bootcount > bootlimit)) {
printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n",
(unsigned)bootlimit);
s = getenv ("altbootcmd");
}
else
#endif /* CONFIG_BOOTCOUNT_LIMIT */
s = getenv ("bootcmd");
#ifdef CONFIG_OF_CONTROL
/* Allow the fdt to override the boot command */
env = fdtdec_get_config_string(gd->fdt_blob, "bootcmd");
if (env)
s = env;
process_fdt_options(gd->fdt_blob);
/*
* If the bootsecure option was chosen, use secure_boot_cmd().
* Always use 'env' in this case, since bootsecure requres that the
* bootcmd was specified in the FDT too.
*/
if (fdtdec_get_config_int(gd->fdt_blob, "bootsecure", 0))
secure_boot_cmd(env);
#endif /* CONFIG_OF_CONTROL */
debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
if (bootdelay != -1 && s && !abortboot(bootdelay)) {
#if defined(CONFIG_AUTOBOOT_KEYED) && !defined(CONFIG_AUTOBOOT_KEYED_CTRLC)
int prev = disable_ctrlc(1); /* disable Control C checking */
#endif
run_command_list(s, -1, 0);
#if defined(CONFIG_AUTOBOOT_KEYED) && !defined(CONFIG_AUTOBOOT_KEYED_CTRLC)
disable_ctrlc(prev); /* restore Control C checking */
#endif
}
#ifdef CONFIG_MENUKEY
if (menukey == CONFIG_MENUKEY) {
s = getenv("menucmd");
if (s)
run_command_list(s, -1, 0);
}
#endif /* CONFIG_MENUKEY */
}
#endif /* CONFIG_BOOTDELAY */
void main_loop(void)
{
#ifndef CONFIG_SYS_HUSH_PARSER
static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
int len;
int rc = 1;
int flag;
#endif
#ifdef CONFIG_PREBOOT
char *p;
#endif
bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop");
#ifndef CONFIG_SYS_GENERIC_BOARD
puts("Warning: Your board does not use generic board. Please read\n");
puts("doc/README.generic-board and take action. Boards not\n");
puts("upgraded by the late 2014 may break or be removed.\n");
#endif
#ifdef CONFIG_MODEM_SUPPORT
debug("DEBUG: main_loop: do_mdm_init=%d\n", do_mdm_init);
if (do_mdm_init) {
char *str = strdup(getenv("mdm_cmd"));
setenv("preboot", str); /* set or delete definition */
if (str != NULL)
free(str);
mdm_init(); /* wait for modem connection */
}
#endif /* CONFIG_MODEM_SUPPORT */
#ifdef CONFIG_VERSION_VARIABLE
{
setenv("ver", version_string); /* set version variable */
}
#endif /* CONFIG_VERSION_VARIABLE */
#ifdef CONFIG_SYS_HUSH_PARSER
u_boot_hush_start();
#endif
#if defined(CONFIG_HUSH_INIT_VAR)
hush_init_var();
#endif
#ifdef CONFIG_PREBOOT
p = getenv("preboot");
if (p != NULL) {
# ifdef CONFIG_AUTOBOOT_KEYED
int prev = disable_ctrlc(1); /* disable Control C checking */
# endif
run_command_list(p, -1, 0);
# ifdef CONFIG_AUTOBOOT_KEYED
disable_ctrlc(prev); /* restore Control C checking */
# endif
}
#endif /* CONFIG_PREBOOT */
#if defined(CONFIG_UPDATE_TFTP)
update_tftp(0UL);
#endif /* CONFIG_UPDATE_TFTP */
#ifdef CONFIG_BOOTDELAY
process_boot_delay();
#endif
/*
* Main Loop for Monitor Command Processing
*/
#ifdef CONFIG_SYS_HUSH_PARSER
parse_file_outer();
/* This point is never reached */
for (;;);
#else
for (;;) {
#ifdef CONFIG_BOOT_RETRY_TIME
if (rc >= 0) {
/* Saw enough of a valid command to
* restart the timeout.
*/
reset_cmd_timeout();
}
#endif
len = readline (CONFIG_SYS_PROMPT);
flag = 0; /* assume no special flags for now */
if (len > 0)
strcpy (lastcommand, console_buffer);
else if (len == 0)
flag |= CMD_FLAG_REPEAT;
#ifdef CONFIG_BOOT_RETRY_TIME
else if (len == -2) {
/* -2 means timed out, retry autoboot
*/
puts ("\nTimed out waiting for command\n");
# ifdef CONFIG_RESET_TO_RETRY
/* Reinit board to run initialization code again */
do_reset (NULL, 0, 0, NULL);
# else
return; /* retry autoboot */
# endif
}
#endif
if (len == -1)
puts ("<INTERRUPT>\n");
else
rc = run_command(lastcommand, flag);
if (rc <= 0) {
/* invalid command or not repeatable, forget it */
lastcommand[0] = 0;
}
}
#endif /*CONFIG_SYS_HUSH_PARSER*/
}
#ifdef CONFIG_BOOT_RETRY_TIME
/***************************************************************************
* initialize command line timeout
*/
void init_cmd_timeout(void)
{
char *s = getenv ("bootretry");
if (s != NULL)
retry_time = (int)simple_strtol(s, NULL, 10);
else
retry_time = CONFIG_BOOT_RETRY_TIME;
if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN)
retry_time = CONFIG_BOOT_RETRY_MIN;
}
/***************************************************************************
* reset command line timeout to retry_time seconds
*/
void reset_cmd_timeout(void)
{
endtime = endtick(retry_time);
}
#endif
#ifdef CONFIG_CMDLINE_EDITING
/*
* cmdline-editing related codes from vivi.
* Author: Janghoon Lyu <nandy@mizi.com>
*/
#define putnstr(str,n) do { \
printf ("%.*s", (int)n, str); \
} while (0)
#define CTL_CH(c) ((c) - 'a' + 1)
#define CTL_BACKSPACE ('\b')
#define DEL ((char)255)
#define DEL7 ((char)127)
#define CREAD_HIST_CHAR ('!')
#define getcmd_putch(ch) putc(ch)
#define getcmd_getch() getc()
#define getcmd_cbeep() getcmd_putch('\a')
#define HIST_MAX 20
#define HIST_SIZE CONFIG_SYS_CBSIZE
static int hist_max;
static int hist_add_idx;
static int hist_cur = -1;
static unsigned hist_num;
static char *hist_list[HIST_MAX];
static char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */
#define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1)
static void hist_init(void)
{
int i;
hist_max = 0;
hist_add_idx = 0;
hist_cur = -1;
hist_num = 0;
for (i = 0; i < HIST_MAX; i++) {
hist_list[i] = hist_lines[i];
hist_list[i][0] = '\0';
}
}
static void cread_add_to_hist(char *line)
{
strcpy(hist_list[hist_add_idx], line);
if (++hist_add_idx >= HIST_MAX)
hist_add_idx = 0;
if (hist_add_idx > hist_max)
hist_max = hist_add_idx;
hist_num++;
}
static char* hist_prev(void)
{
char *ret;
int old_cur;
if (hist_cur < 0)
return NULL;
old_cur = hist_cur;
if (--hist_cur < 0)
hist_cur = hist_max;
if (hist_cur == hist_add_idx) {
hist_cur = old_cur;
ret = NULL;
} else
ret = hist_list[hist_cur];
return (ret);
}
static char* hist_next(void)
{
char *ret;
if (hist_cur < 0)
return NULL;
if (hist_cur == hist_add_idx)
return NULL;
if (++hist_cur > hist_max)
hist_cur = 0;
if (hist_cur == hist_add_idx) {
ret = "";
} else
ret = hist_list[hist_cur];
return (ret);
}
#ifndef CONFIG_CMDLINE_EDITING
static void cread_print_hist_list(void)
{
int i;
unsigned long n;
n = hist_num - hist_max;
i = hist_add_idx + 1;
while (1) {
if (i > hist_max)
i = 0;
if (i == hist_add_idx)
break;
printf("%s\n", hist_list[i]);
n++;
i++;
}
}
#endif /* CONFIG_CMDLINE_EDITING */
#define BEGINNING_OF_LINE() { \
while (num) { \
getcmd_putch(CTL_BACKSPACE); \
num--; \
} \
}
#define ERASE_TO_EOL() { \
if (num < eol_num) { \
printf("%*s", (int)(eol_num - num), ""); \
do { \
getcmd_putch(CTL_BACKSPACE); \
} while (--eol_num > num); \
} \
}
#define REFRESH_TO_EOL() { \
if (num < eol_num) { \
wlen = eol_num - num; \
putnstr(buf + num, wlen); \
num = eol_num; \
} \
}
static void cread_add_char(char ichar, int insert, unsigned long *num,
unsigned long *eol_num, char *buf, unsigned long len)
{
unsigned long wlen;
/* room ??? */
if (insert || *num == *eol_num) {
if (*eol_num > len - 1) {
getcmd_cbeep();
return;
}
(*eol_num)++;
}
if (insert) {
wlen = *eol_num - *num;
if (wlen > 1) {
memmove(&buf[*num+1], &buf[*num], wlen-1);
}
buf[*num] = ichar;
putnstr(buf + *num, wlen);
(*num)++;
while (--wlen) {
getcmd_putch(CTL_BACKSPACE);
}
} else {
/* echo the character */
wlen = 1;
buf[*num] = ichar;
putnstr(buf + *num, wlen);
(*num)++;
}
}
static void cread_add_str(char *str, int strsize, int insert, unsigned long *num,
unsigned long *eol_num, char *buf, unsigned long len)
{
while (strsize--) {
cread_add_char(*str, insert, num, eol_num, buf, len);
str++;
}
}
static int cread_line(const char *const prompt, char *buf, unsigned int *len,
int timeout)
{
unsigned long num = 0;
unsigned long eol_num = 0;
unsigned long wlen;
char ichar;
int insert = 1;
int esc_len = 0;
char esc_save[8];
int init_len = strlen(buf);
int first = 1;
if (init_len)
cread_add_str(buf, init_len, 1, &num, &eol_num, buf, *len);
while (1) {
#ifdef CONFIG_BOOT_RETRY_TIME
while (!tstc()) { /* while no incoming data */
if (retry_time >= 0 && get_ticks() > endtime)
return (-2); /* timed out */
WATCHDOG_RESET();
}
#endif
if (first && timeout) {
uint64_t etime = endtick(timeout);
while (!tstc()) { /* while no incoming data */
if (get_ticks() >= etime)
return -2; /* timed out */
WATCHDOG_RESET();
}
first = 0;
}
ichar = getcmd_getch();
if ((ichar == '\n') || (ichar == '\r')) {
putc('\n');
break;
}
/*
* handle standard linux xterm esc sequences for arrow key, etc.
*/
if (esc_len != 0) {
if (esc_len == 1) {
if (ichar == '[') {
esc_save[esc_len] = ichar;
esc_len = 2;
} else {
cread_add_str(esc_save, esc_len, insert,
&num, &eol_num, buf, *len);
esc_len = 0;
}
continue;
}
switch (ichar) {
case 'D': /* <- key */
ichar = CTL_CH('b');
esc_len = 0;
break;
case 'C': /* -> key */
ichar = CTL_CH('f');
esc_len = 0;
break; /* pass off to ^F handler */
case 'H': /* Home key */
ichar = CTL_CH('a');
esc_len = 0;
break; /* pass off to ^A handler */
case 'A': /* up arrow */
ichar = CTL_CH('p');
esc_len = 0;
break; /* pass off to ^P handler */
case 'B': /* down arrow */
ichar = CTL_CH('n');
esc_len = 0;
break; /* pass off to ^N handler */
default:
esc_save[esc_len++] = ichar;
cread_add_str(esc_save, esc_len, insert,
&num, &eol_num, buf, *len);
esc_len = 0;
continue;
}
}
switch (ichar) {
case 0x1b:
if (esc_len == 0) {
esc_save[esc_len] = ichar;
esc_len = 1;
} else {
puts("impossible condition #876\n");
esc_len = 0;
}
break;
case CTL_CH('a'):
BEGINNING_OF_LINE();
break;
case CTL_CH('c'): /* ^C - break */
*buf = '\0'; /* discard input */
return (-1);
case CTL_CH('f'):
if (num < eol_num) {
getcmd_putch(buf[num]);
num++;
}
break;
case CTL_CH('b'):
if (num) {
getcmd_putch(CTL_BACKSPACE);
num--;
}
break;
case CTL_CH('d'):
if (num < eol_num) {
wlen = eol_num - num - 1;
if (wlen) {
memmove(&buf[num], &buf[num+1], wlen);
putnstr(buf + num, wlen);
}
getcmd_putch(' ');
do {
getcmd_putch(CTL_BACKSPACE);
} while (wlen--);
eol_num--;
}
break;
case CTL_CH('k'):
ERASE_TO_EOL();
break;
case CTL_CH('e'):
REFRESH_TO_EOL();
break;
case CTL_CH('o'):
insert = !insert;
break;
case CTL_CH('x'):
case CTL_CH('u'):
BEGINNING_OF_LINE();
ERASE_TO_EOL();
break;
case DEL:
case DEL7:
case 8:
if (num) {
wlen = eol_num - num;
num--;
memmove(&buf[num], &buf[num+1], wlen);
getcmd_putch(CTL_BACKSPACE);
putnstr(buf + num, wlen);
getcmd_putch(' ');
do {
getcmd_putch(CTL_BACKSPACE);
} while (wlen--);
eol_num--;
}
break;
case CTL_CH('p'):
case CTL_CH('n'):
{
char * hline;
esc_len = 0;
if (ichar == CTL_CH('p'))
hline = hist_prev();
else
hline = hist_next();
if (!hline) {
getcmd_cbeep();
continue;
}
/* nuke the current line */
/* first, go home */
BEGINNING_OF_LINE();
/* erase to end of line */
ERASE_TO_EOL();
/* copy new line into place and display */
strcpy(buf, hline);
eol_num = strlen(buf);
REFRESH_TO_EOL();
continue;
}
#ifdef CONFIG_AUTO_COMPLETE
case '\t': {
int num2, col;
/* do not autocomplete when in the middle */
if (num < eol_num) {
getcmd_cbeep();
break;
}
buf[num] = '\0';
col = strlen(prompt) + eol_num;
num2 = num;
if (cmd_auto_complete(prompt, buf, &num2, &col)) {
col = num2 - num;
num += col;
eol_num += col;
}
break;
}
#endif
default:
cread_add_char(ichar, insert, &num, &eol_num, buf, *len);
break;
}
}
*len = eol_num;
buf[eol_num] = '\0'; /* lose the newline */
if (buf[0] && buf[0] != CREAD_HIST_CHAR)
cread_add_to_hist(buf);
hist_cur = hist_add_idx;
return 0;
}
#endif /* CONFIG_CMDLINE_EDITING */
/****************************************************************************/
/*
* Prompt for input and read a line.
* If CONFIG_BOOT_RETRY_TIME is defined and retry_time >= 0,
* time out when time goes past endtime (timebase time in ticks).
* Return: number of read characters
* -1 if break
* -2 if timed out
*/
int readline (const char *const prompt)
{
/*
* If console_buffer isn't 0-length the user will be prompted to modify
* it instead of entering it from scratch as desired.
*/
console_buffer[0] = '\0';
return readline_into_buffer(prompt, console_buffer, 0);
}
int readline_into_buffer(const char *const prompt, char *buffer, int timeout)
{
char *p = buffer;
#ifdef CONFIG_CMDLINE_EDITING
unsigned int len = CONFIG_SYS_CBSIZE;
int rc;
static int initted = 0;
/*
* History uses a global array which is not
* writable until after relocation to RAM.
* Revert to non-history version if still
* running from flash.
*/
if (gd->flags & GD_FLG_RELOC) {
if (!initted) {
hist_init();
initted = 1;
}
if (prompt)
puts (prompt);
rc = cread_line(prompt, p, &len, timeout);
return rc < 0 ? rc : len;
} else {
#endif /* CONFIG_CMDLINE_EDITING */
char * p_buf = p;
int n = 0; /* buffer index */
int plen = 0; /* prompt length */
int col; /* output column cnt */
char c;
/* print prompt */
if (prompt) {
plen = strlen (prompt);
puts (prompt);
}
col = plen;
for (;;) {
#ifdef CONFIG_BOOT_RETRY_TIME
while (!tstc()) { /* while no incoming data */
if (retry_time >= 0 && get_ticks() > endtime)
return (-2); /* timed out */
WATCHDOG_RESET();
}
#endif
WATCHDOG_RESET(); /* Trigger watchdog, if needed */
#ifdef CONFIG_SHOW_ACTIVITY
while (!tstc()) {
show_activity(0);
WATCHDOG_RESET();
}
#endif
c = getc();
/*
* Special character handling
*/
switch (c) {
case '\r': /* Enter */
case '\n':
*p = '\0';
puts ("\r\n");
return p - p_buf;
case '\0': /* nul */
continue;
case 0x03: /* ^C - break */
p_buf[0] = '\0'; /* discard input */
return -1;
case 0x15: /* ^U - erase line */
while (col > plen) {
puts (erase_seq);
--col;
}
p = p_buf;
n = 0;
continue;
case 0x17: /* ^W - erase word */
p=delete_char(p_buf, p, &col, &n, plen);
while ((n > 0) && (*p != ' ')) {
p=delete_char(p_buf, p, &col, &n, plen);
}
continue;
case 0x08: /* ^H - backspace */
case 0x7F: /* DEL - backspace */
p=delete_char(p_buf, p, &col, &n, plen);
continue;
default:
/*
* Must be a normal character then
*/
if (n < CONFIG_SYS_CBSIZE-2) {
if (c == '\t') { /* expand TABs */
#ifdef CONFIG_AUTO_COMPLETE
/* if auto completion triggered just continue */
*p = '\0';
if (cmd_auto_complete(prompt, console_buffer, &n, &col)) {
p = p_buf + n; /* reset */
continue;
}
#endif
puts (tab_seq+(col&07));
col += 8 - (col&07);
} else {
char buf[2];
/*
* Echo input using puts() to force an
* LCD flush if we are using an LCD
*/
++col;
buf[0] = c;
buf[1] = '\0';
puts(buf);
}
*p++ = c;
++n;
} else { /* Buffer full */
putc ('\a');
}
}
}
#ifdef CONFIG_CMDLINE_EDITING
}
#endif
}
/****************************************************************************/
static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen)
{
char *s;
if (*np == 0) {
return (p);
}
if (*(--p) == '\t') { /* will retype the whole line */
while (*colp > plen) {
puts (erase_seq);
(*colp)--;
}
for (s=buffer; s<p; ++s) {
if (*s == '\t') {
puts (tab_seq+((*colp) & 07));
*colp += 8 - ((*colp) & 07);
} else {
++(*colp);
putc (*s);
}
}
} else {
puts (erase_seq);
(*colp)--;
}
(*np)--;
return (p);
}
/****************************************************************************/
int parse_line (char *line, char *argv[])
{
int nargs = 0;
debug_parser("parse_line: \"%s\"\n", line);
while (nargs < CONFIG_SYS_MAXARGS) {
/* skip any white space */
while (isblank(*line))
++line;
if (*line == '\0') { /* end of line, no more args */
argv[nargs] = NULL;
debug_parser("parse_line: nargs=%d\n", nargs);
return nargs;
}
argv[nargs++] = line; /* begin of argument string */
/* find end of string */
while (*line && !isblank(*line))
++line;
if (*line == '\0') { /* end of line, no more args */
argv[nargs] = NULL;
debug_parser("parse_line: nargs=%d\n", nargs);
return nargs;
}
*line++ = '\0'; /* terminate current arg */
}
printf ("** Too many args (max. %d) **\n", CONFIG_SYS_MAXARGS);
debug_parser("parse_line: nargs=%d\n", nargs);
return (nargs);
}
/****************************************************************************/
#ifndef CONFIG_SYS_HUSH_PARSER
static void process_macros (const char *input, char *output)
{
char c, prev;
const char *varname_start = NULL;
int inputcnt = strlen (input);
int outputcnt = CONFIG_SYS_CBSIZE;
int state = 0; /* 0 = waiting for '$' */
/* 1 = waiting for '(' or '{' */
/* 2 = waiting for ')' or '}' */
/* 3 = waiting for ''' */
char *output_start = output;
debug_parser("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n", strlen(input),
input);
prev = '\0'; /* previous character */
while (inputcnt && outputcnt) {
c = *input++;
inputcnt--;
if (state != 3) {
/* remove one level of escape characters */
if ((c == '\\') && (prev != '\\')) {
if (inputcnt-- == 0)
break;
prev = c;
c = *input++;
}
}
switch (state) {
case 0: /* Waiting for (unescaped) $ */
if ((c == '\'') && (prev != '\\')) {
state = 3;
break;
}
if ((c == '$') && (prev != '\\')) {
state++;
} else {
*(output++) = c;
outputcnt--;
}
break;
case 1: /* Waiting for ( */
if (c == '(' || c == '{') {
state++;
varname_start = input;
} else {
state = 0;
*(output++) = '$';
outputcnt--;
if (outputcnt) {
*(output++) = c;
outputcnt--;
}
}
break;
case 2: /* Waiting for ) */
if (c == ')' || c == '}') {
int i;
char envname[CONFIG_SYS_CBSIZE], *envval;
int envcnt = input - varname_start - 1; /* Varname # of chars */
/* Get the varname */
for (i = 0; i < envcnt; i++) {
envname[i] = varname_start[i];
}
envname[i] = 0;
/* Get its value */
envval = getenv (envname);
/* Copy into the line if it exists */
if (envval != NULL)
while ((*envval) && outputcnt) {
*(output++) = *(envval++);
outputcnt--;
}
/* Look for another '$' */
state = 0;
}
break;
case 3: /* Waiting for ' */
if ((c == '\'') && (prev != '\\')) {
state = 0;
} else {
*(output++) = c;
outputcnt--;
}
break;
}
prev = c;
}
if (outputcnt)
*output = 0;
else
*(output - 1) = 0;
debug_parser("[PROCESS_MACROS] OUTPUT len %zd: \"%s\"\n",
strlen(output_start), output_start);
}
/****************************************************************************
* returns:
* 1 - command executed, repeatable
* 0 - command executed but not repeatable, interrupted commands are
* always considered not repeatable
* -1 - not executed (unrecognized, bootd recursion or too many args)
* (If cmd is NULL or "" or longer than CONFIG_SYS_CBSIZE-1 it is
* considered unrecognized)
*
* WARNING:
*
* We must create a temporary copy of the command since the command we get
* may be the result from getenv(), which returns a pointer directly to
* the environment data, which may change magicly when the command we run
* creates or modifies environment variables (like "bootp" does).
*/
static int builtin_run_command(const char *cmd, int flag)
{
char cmdbuf[CONFIG_SYS_CBSIZE]; /* working copy of cmd */
char *token; /* start of token in cmdbuf */
char *sep; /* end of token (separator) in cmdbuf */
char finaltoken[CONFIG_SYS_CBSIZE];
char *str = cmdbuf;
char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */
int argc, inquotes;
int repeatable = 1;
int rc = 0;
debug_parser("[RUN_COMMAND] cmd[%p]=\"", cmd);
if (DEBUG_PARSER) {
/* use puts - string may be loooong */
puts(cmd ? cmd : "NULL");
puts("\"\n");
}
clear_ctrlc(); /* forget any previous Control C */
if (!cmd || !*cmd) {
return -1; /* empty command */
}
if (strlen(cmd) >= CONFIG_SYS_CBSIZE) {
puts ("## Command too long!\n");
return -1;
}
strcpy (cmdbuf, cmd);
/* Process separators and check for invalid
* repeatable commands
*/
debug_parser("[PROCESS_SEPARATORS] %s\n", cmd);
while (*str) {
/*
* Find separator, or string end
* Allow simple escape of ';' by writing "\;"
*/
for (inquotes = 0, sep = str; *sep; sep++) {
if ((*sep=='\'') &&
(*(sep-1) != '\\'))
inquotes=!inquotes;
if (!inquotes &&
(*sep == ';') && /* separator */
( sep != str) && /* past string start */
(*(sep-1) != '\\')) /* and NOT escaped */
break;
}
/*
* Limit the token to data between separators
*/
token = str;
if (*sep) {
str = sep + 1; /* start of command for next pass */
*sep = '\0';
}
else
str = sep; /* no more commands for next pass */
debug_parser("token: \"%s\"\n", token);
/* find macros in this token and replace them */
process_macros (token, finaltoken);
/* Extract arguments */
if ((argc = parse_line (finaltoken, argv)) == 0) {
rc = -1; /* no command at all */
continue;
}
if (cmd_process(flag, argc, argv, &repeatable, NULL))
rc = -1;
/* Did the user stop this? */
if (had_ctrlc ())
return -1; /* if stopped then not repeatable */
}
return rc ? rc : repeatable;
}
#endif
/*
* Run a command using the selected parser.
*
* @param cmd Command to run
* @param flag Execution flags (CMD_FLAG_...)
* @return 0 on success, or != 0 on error.
*/
int run_command(const char *cmd, int flag)
{
#ifndef CONFIG_SYS_HUSH_PARSER
/*
* builtin_run_command can return 0 or 1 for success, so clean up
* its result.
*/
if (builtin_run_command(cmd, flag) == -1)
return 1;
return 0;
#else
return parse_string_outer(cmd,
FLAG_PARSE_SEMICOLON | FLAG_EXIT_FROM_LOOP);
#endif
}
#ifndef CONFIG_SYS_HUSH_PARSER
/**
* Execute a list of command separated by ; or \n using the built-in parser.
*
* This function cannot take a const char * for the command, since if it
* finds newlines in the string, it replaces them with \0.
*
* @param cmd String containing list of commands
* @param flag Execution flags (CMD_FLAG_...)
* @return 0 on success, or != 0 on error.
*/
static int builtin_run_command_list(char *cmd, int flag)
{
char *line, *next;
int rcode = 0;
/*
* Break into individual lines, and execute each line; terminate on
* error.
*/
line = next = cmd;
while (*next) {
if (*next == '\n') {
*next = '\0';
/* run only non-empty commands */
if (*line) {
debug("** exec: \"%s\"\n", line);
if (builtin_run_command(line, 0) < 0) {
rcode = 1;
break;
}
}
line = next + 1;
}
++next;
}
if (rcode == 0 && *line)
rcode = (builtin_run_command(line, 0) >= 0);
return rcode;
}
#endif
int run_command_list(const char *cmd, int len, int flag)
{
int need_buff = 1;
char *buff = (char *)cmd; /* cast away const */
int rcode = 0;
if (len == -1) {
len = strlen(cmd);
#ifdef CONFIG_SYS_HUSH_PARSER
/* hush will never change our string */
need_buff = 0;
#else
/* the built-in parser will change our string if it sees \n */
need_buff = strchr(cmd, '\n') != NULL;
#endif
}
if (need_buff) {
buff = malloc(len + 1);
if (!buff)
return 1;
memcpy(buff, cmd, len);
buff[len] = '\0';
}
#ifdef CONFIG_SYS_HUSH_PARSER
rcode = parse_string_outer(buff, FLAG_PARSE_SEMICOLON);
#else
/*
* This function will overwrite any \n it sees with a \0, which
* is why it can't work with a const char *. Here we are making
* using of internal knowledge of this function, to avoid always
* doing a malloc() which is actually required only in a case that
* is pretty rare.
*/
rcode = builtin_run_command_list(buff, flag);
if (need_buff)
free(buff);
#endif
return rcode;
}
/****************************************************************************/
#if defined(CONFIG_CMD_RUN)
int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
int i;
if (argc < 2)
return CMD_RET_USAGE;
for (i=1; i<argc; ++i) {
char *arg;
if ((arg = getenv (argv[i])) == NULL) {
printf ("## Error: \"%s\" not defined\n", argv[i]);
return 1;
}
if (run_command_list(arg, -1, flag) != 0)
return 1;
}
return 0;
}
#endif