| |
| #ifndef WCOM_UBI_PARTITION_APP |
| /* one flash chip only called boot */ |
| # define WCOM_UBI_LINUX_MTD ubi.mtd=ubi0 |
| ubiattach=ubi part ubi0 |
| #else /* WCOM_UBI_PARTITION_APP */ |
| /* two flash chips called boot and app */ |
| # define WCOM_UBI_LINUX_MTD ubi.mtd=ubi0 ubi.mtd=ubi1 |
| ubiattach=if test ${boot_bank} -eq 0; |
| then; |
| ubi part ubi0; |
| else; |
| ubi part ubi1; |
| fi |
| #endif /* WCOMC_UBI_PARTITION_APP */ |
| |
| actual_bank=0 |
| |
| add_default=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off: |
| console=ttyS0,${baudrate} mem=${kernelmem} init=${init} |
| phram.phram=phvar,${varaddr},CONFIG_KM_PHRAM |
| WCOM_UBI_LINUX_MTD |
| |
| addpanic=setenv bootargs ${bootargs} panic=1 panic_on_oops=1 |
| altbootcmd=run bootcmd |
| backup_bank=0 |
| boot=bootm ${load_addr_r} - ${fdt_addr_r} |
| |
| bootcmd=km_checkbidhwk && |
| setenv bootcmd 'if km_checktestboot; |
| then; |
| setenv boot_bank ${test_bank}; |
| else; |
| setenv boot_bank ${actual_bank}; |
| fi; |
| run ${subbootcmds}; reset' && |
| setenv altbootcmd 'setenv boot_bank ${backup_bank}; |
| run ${subbootcmds}; |
| reset' && |
| saveenv && |
| saveenv && |
| boot |
| |
| cramfsaddr=CONFIG_KM_CRAMFS_ADDR |
| cramfsloadfdt=cramfsload ${fdt_addr_r} fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb |
| cramfsloadkernel=cramfsload ${load_addr_r} ${uimage} |
| |
| develop=tftp ${load_addr_r} scripts/develop-${arch}.txt && |
| env import -t ${load_addr_r} ${filesize} && |
| run setup_debug_env |
| |
| env_version=1 |
| fdt_addr_r=CONFIG_KM_FDT_ADDR |
| flashargs=setenv bootargs root=mtdblock:rootfs${boot_bank} rootfstype=squashfs ro |
| init=/sbin/init-overlay.sh |
| load=tftpboot ${load_addr_r} ${hostname}/u-boot.bin |
| load_addr_r=CONFIG_KM_KERNEL_ADDR |
| pnvramsize=CONFIG_KM_PNVRAM |
| |
| ramfs=tftp ${load_addr_r} scripts/ramfs-${arch}.txt && |
| env import -t ${load_addr_r} ${filesize} && |
| run setup_debug_env |
| |
| release=run newenv; reset |
| subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt set_fdthigh |
| cramfsloadkernel flashargs add_default addpanic boot |
| testbootcmd=setenv boot_bank ${test_bank}; run ${subbootcmds}; reset |
| ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank} |