| /* |
| * SAMSUNG EXYNOS USB HOST EHCI Controller |
| * |
| * Copyright (C) 2012 Samsung Electronics Co.Ltd |
| * Vivek Gautam <gautam.vivek@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <libfdt.h> |
| #include <malloc.h> |
| #include <usb.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/ehci.h> |
| #include <asm/arch/system.h> |
| #include <asm/arch/power.h> |
| #include <asm/gpio.h> |
| #include <linux/errno.h> |
| #include <linux/compat.h> |
| #include "ehci.h" |
| |
| /* Declare global data pointer */ |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct exynos_ehci_platdata { |
| struct usb_platdata usb_plat; |
| fdt_addr_t hcd_base; |
| fdt_addr_t phy_base; |
| struct gpio_desc vbus_gpio; |
| }; |
| |
| /** |
| * Contains pointers to register base addresses |
| * for the usb controller. |
| */ |
| struct exynos_ehci { |
| struct ehci_ctrl ctrl; |
| struct exynos_usb_phy *usb; |
| struct ehci_hccr *hcd; |
| }; |
| |
| static int ehci_usb_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct exynos_ehci_platdata *plat = dev_get_platdata(dev); |
| const void *blob = gd->fdt_blob; |
| unsigned int node; |
| int depth; |
| |
| /* |
| * Get the base address for XHCI controller from the device node |
| */ |
| plat->hcd_base = devfdt_get_addr(dev); |
| if (plat->hcd_base == FDT_ADDR_T_NONE) { |
| debug("Can't get the XHCI register base address\n"); |
| return -ENXIO; |
| } |
| |
| depth = 0; |
| node = fdtdec_next_compatible_subnode(blob, dev_of_offset(dev), |
| COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth); |
| if (node <= 0) { |
| debug("XHCI: Can't get device node for usb3-phy controller\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * Get the base address for usbphy from the device node |
| */ |
| plat->phy_base = fdtdec_get_addr(blob, node, "reg"); |
| if (plat->phy_base == FDT_ADDR_T_NONE) { |
| debug("Can't get the usbphy register address\n"); |
| return -ENXIO; |
| } |
| |
| /* Vbus gpio */ |
| gpio_request_by_name(dev, "samsung,vbus-gpio", 0, |
| &plat->vbus_gpio, GPIOD_IS_OUT); |
| |
| return 0; |
| } |
| |
| static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb) |
| { |
| u32 hsic_ctrl; |
| |
| clrbits_le32(&usb->usbphyctrl0, |
| HOST_CTRL0_FSEL_MASK | |
| HOST_CTRL0_COMMONON_N | |
| /* HOST Phy setting */ |
| HOST_CTRL0_PHYSWRST | |
| HOST_CTRL0_PHYSWRSTALL | |
| HOST_CTRL0_SIDDQ | |
| HOST_CTRL0_FORCESUSPEND | |
| HOST_CTRL0_FORCESLEEP); |
| |
| setbits_le32(&usb->usbphyctrl0, |
| /* Setting up the ref freq */ |
| (CLK_24MHZ << 16) | |
| /* HOST Phy setting */ |
| HOST_CTRL0_LINKSWRST | |
| HOST_CTRL0_UTMISWRST); |
| udelay(10); |
| clrbits_le32(&usb->usbphyctrl0, |
| HOST_CTRL0_LINKSWRST | |
| HOST_CTRL0_UTMISWRST); |
| |
| /* HSIC Phy Setting */ |
| hsic_ctrl = (HSIC_CTRL_FORCESUSPEND | |
| HSIC_CTRL_FORCESLEEP | |
| HSIC_CTRL_SIDDQ); |
| |
| clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl); |
| clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl); |
| |
| hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK) |
| << HSIC_CTRL_REFCLKDIV_SHIFT) |
| | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK) |
| << HSIC_CTRL_REFCLKSEL_SHIFT) |
| | HSIC_CTRL_UTMISWRST); |
| |
| setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); |
| setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); |
| |
| udelay(10); |
| |
| clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST | |
| HSIC_CTRL_UTMISWRST); |
| |
| clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST | |
| HSIC_CTRL_UTMISWRST); |
| |
| udelay(20); |
| |
| /* EHCI Ctrl setting */ |
| setbits_le32(&usb->ehcictrl, |
| EHCICTRL_ENAINCRXALIGN | |
| EHCICTRL_ENAINCR4 | |
| EHCICTRL_ENAINCR8 | |
| EHCICTRL_ENAINCR16); |
| } |
| |
| static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb) |
| { |
| writel(CLK_24MHZ, &usb->usbphyclk); |
| |
| clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | |
| PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | |
| PHYPWR_NORMAL_MASK_PHY0)); |
| |
| setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); |
| udelay(10); |
| clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); |
| } |
| |
| static void setup_usb_phy(struct exynos_usb_phy *usb) |
| { |
| set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); |
| |
| set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); |
| |
| if (cpu_is_exynos5()) |
| exynos5_setup_usb_phy(usb); |
| else if (cpu_is_exynos4()) |
| if (proid_is_exynos4412()) |
| exynos4412_setup_usb_phy((struct exynos4412_usb_phy *) |
| usb); |
| } |
| |
| static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb) |
| { |
| u32 hsic_ctrl; |
| |
| /* HOST_PHY reset */ |
| setbits_le32(&usb->usbphyctrl0, |
| HOST_CTRL0_PHYSWRST | |
| HOST_CTRL0_PHYSWRSTALL | |
| HOST_CTRL0_SIDDQ | |
| HOST_CTRL0_FORCESUSPEND | |
| HOST_CTRL0_FORCESLEEP); |
| |
| /* HSIC Phy reset */ |
| hsic_ctrl = (HSIC_CTRL_FORCESUSPEND | |
| HSIC_CTRL_FORCESLEEP | |
| HSIC_CTRL_SIDDQ | |
| HSIC_CTRL_PHYSWRST); |
| |
| setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); |
| setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); |
| } |
| |
| static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb) |
| { |
| setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | |
| PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | |
| PHYPWR_NORMAL_MASK_PHY0)); |
| } |
| |
| /* Reset the EHCI host controller. */ |
| static void reset_usb_phy(struct exynos_usb_phy *usb) |
| { |
| if (cpu_is_exynos5()) |
| exynos5_reset_usb_phy(usb); |
| else if (cpu_is_exynos4()) |
| if (proid_is_exynos4412()) |
| exynos4412_reset_usb_phy((struct exynos4412_usb_phy *) |
| usb); |
| |
| set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE); |
| } |
| |
| static int ehci_usb_probe(struct udevice *dev) |
| { |
| struct exynos_ehci_platdata *plat = dev_get_platdata(dev); |
| struct exynos_ehci *ctx = dev_get_priv(dev); |
| struct ehci_hcor *hcor; |
| |
| ctx->hcd = (struct ehci_hccr *)plat->hcd_base; |
| ctx->usb = (struct exynos_usb_phy *)plat->phy_base; |
| |
| /* setup the Vbus gpio here */ |
| if (dm_gpio_is_valid(&plat->vbus_gpio)) |
| dm_gpio_set_value(&plat->vbus_gpio, 1); |
| |
| setup_usb_phy(ctx->usb); |
| hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd + |
| HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase))); |
| |
| return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST); |
| } |
| |
| static int ehci_usb_remove(struct udevice *dev) |
| { |
| struct exynos_ehci *ctx = dev_get_priv(dev); |
| int ret; |
| |
| ret = ehci_deregister(dev); |
| if (ret) |
| return ret; |
| reset_usb_phy(ctx->usb); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id ehci_usb_ids[] = { |
| { .compatible = "samsung,exynos-ehci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(usb_ehci) = { |
| .name = "ehci_exynos", |
| .id = UCLASS_USB, |
| .of_match = ehci_usb_ids, |
| .ofdata_to_platdata = ehci_usb_ofdata_to_platdata, |
| .probe = ehci_usb_probe, |
| .remove = ehci_usb_remove, |
| .ops = &ehci_usb_ops, |
| .priv_auto_alloc_size = sizeof(struct exynos_ehci), |
| .platdata_auto_alloc_size = sizeof(struct exynos_ehci_platdata), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |