| #!/usr/bin/env python3 |
| # SPDX-License-Identifier: GPL-2.0+ |
| # |
| # Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| # |
| |
| """ |
| Move config options from headers to defconfig files. |
| |
| See doc/develop/moveconfig.rst for documentation. |
| """ |
| |
| from argparse import ArgumentParser |
| import collections |
| from contextlib import ExitStack |
| import doctest |
| import filecmp |
| import fnmatch |
| import glob |
| import multiprocessing |
| import os |
| import queue |
| import re |
| import shutil |
| import subprocess |
| import sys |
| import tempfile |
| import threading |
| import time |
| import unittest |
| |
| import asteval |
| from buildman import bsettings |
| from buildman import kconfiglib |
| from buildman import toolchain |
| |
| SHOW_GNU_MAKE = 'scripts/show-gnu-make' |
| SLEEP_TIME=0.03 |
| |
| STATE_IDLE = 0 |
| STATE_DEFCONFIG = 1 |
| STATE_AUTOCONF = 2 |
| STATE_SAVEDEFCONFIG = 3 |
| |
| COLOR_BLACK = '0;30' |
| COLOR_RED = '0;31' |
| COLOR_GREEN = '0;32' |
| COLOR_BROWN = '0;33' |
| COLOR_BLUE = '0;34' |
| COLOR_PURPLE = '0;35' |
| COLOR_CYAN = '0;36' |
| COLOR_LIGHT_GRAY = '0;37' |
| COLOR_DARK_GRAY = '1;30' |
| COLOR_LIGHT_RED = '1;31' |
| COLOR_LIGHT_GREEN = '1;32' |
| COLOR_YELLOW = '1;33' |
| COLOR_LIGHT_BLUE = '1;34' |
| COLOR_LIGHT_PURPLE = '1;35' |
| COLOR_LIGHT_CYAN = '1;36' |
| COLOR_WHITE = '1;37' |
| |
| AUTO_CONF_PATH = 'include/config/auto.conf' |
| CONFIG_DATABASE = 'moveconfig.db' |
| |
| CONFIG_LEN = len('CONFIG_') |
| |
| SIZES = { |
| 'SZ_1': 0x00000001, 'SZ_2': 0x00000002, |
| 'SZ_4': 0x00000004, 'SZ_8': 0x00000008, |
| 'SZ_16': 0x00000010, 'SZ_32': 0x00000020, |
| 'SZ_64': 0x00000040, 'SZ_128': 0x00000080, |
| 'SZ_256': 0x00000100, 'SZ_512': 0x00000200, |
| 'SZ_1K': 0x00000400, 'SZ_2K': 0x00000800, |
| 'SZ_4K': 0x00001000, 'SZ_8K': 0x00002000, |
| 'SZ_16K': 0x00004000, 'SZ_32K': 0x00008000, |
| 'SZ_64K': 0x00010000, 'SZ_128K': 0x00020000, |
| 'SZ_256K': 0x00040000, 'SZ_512K': 0x00080000, |
| 'SZ_1M': 0x00100000, 'SZ_2M': 0x00200000, |
| 'SZ_4M': 0x00400000, 'SZ_8M': 0x00800000, |
| 'SZ_16M': 0x01000000, 'SZ_32M': 0x02000000, |
| 'SZ_64M': 0x04000000, 'SZ_128M': 0x08000000, |
| 'SZ_256M': 0x10000000, 'SZ_512M': 0x20000000, |
| 'SZ_1G': 0x40000000, 'SZ_2G': 0x80000000, |
| 'SZ_4G': 0x100000000 |
| } |
| |
| RE_REMOVE_DEFCONFIG = re.compile(r'(.*)_defconfig') |
| |
| # CONFIG symbols present in the build system (from Linux) but not actually used |
| # in U-Boot; KCONFIG symbols |
| IGNORE_SYMS = ['DEBUG_SECTION_MISMATCH', 'FTRACE_MCOUNT_RECORD', 'GCOV_KERNEL', |
| 'GCOV_PROFILE_ALL', 'KALLSYMS', 'KASAN', 'MODVERSIONS', 'SHELL', |
| 'TPL_BUILD', 'VPL_BUILD', 'IS_ENABLED', 'FOO', 'IF_ENABLED_INT', |
| 'IS_ENABLED_', 'IS_ENABLED_1', 'IS_ENABLED_2', 'IS_ENABLED_3', |
| 'SPL_', 'TPL_', 'SPL_FOO', 'TPL_FOO', 'TOOLS_FOO', |
| 'ACME', 'SPL_ACME', 'TPL_ACME', 'TRACE_BRANCH_PROFILING', |
| 'VAL', '_UNDEFINED', 'SPL_BUILD', ] |
| |
| SPL_PREFIXES = ['SPL_', 'TPL_', 'VPL_', 'TOOLS_'] |
| |
| ### helper functions ### |
| def check_top_directory(): |
| """Exit if we are not at the top of source directory.""" |
| for fname in 'README', 'Licenses': |
| if not os.path.exists(fname): |
| sys.exit('Please run at the top of source directory.') |
| |
| def check_clean_directory(): |
| """Exit if the source tree is not clean.""" |
| for fname in '.config', 'include/config': |
| if os.path.exists(fname): |
| sys.exit("source tree is not clean, please run 'make mrproper'") |
| |
| def get_make_cmd(): |
| """Get the command name of GNU Make. |
| |
| U-Boot needs GNU Make for building, but the command name is not |
| necessarily "make". (for example, "gmake" on FreeBSD). |
| Returns the most appropriate command name on your system. |
| """ |
| with subprocess.Popen([SHOW_GNU_MAKE], stdout=subprocess.PIPE) as proc: |
| ret = proc.communicate() |
| if proc.returncode: |
| sys.exit('GNU Make not found') |
| return ret[0].rstrip() |
| |
| def get_matched_defconfig(line): |
| """Get the defconfig files that match a pattern |
| |
| Args: |
| line (str): Path or filename to match, e.g. 'configs/snow_defconfig' or |
| 'k2*_defconfig'. If no directory is provided, 'configs/' is |
| prepended |
| |
| Returns: |
| list of str: a list of matching defconfig files |
| """ |
| dirname = os.path.dirname(line) |
| if dirname: |
| pattern = line |
| else: |
| pattern = os.path.join('configs', line) |
| return glob.glob(pattern) + glob.glob(pattern + '_defconfig') |
| |
| def get_matched_defconfigs(defconfigs_file): |
| """Get all the defconfig files that match the patterns in a file. |
| |
| Args: |
| defconfigs_file (str): File containing a list of defconfigs to process, |
| or '-' to read the list from stdin |
| |
| Returns: |
| list of str: A list of paths to defconfig files, with no duplicates |
| """ |
| defconfigs = [] |
| with ExitStack() as stack: |
| if defconfigs_file == '-': |
| inf = sys.stdin |
| defconfigs_file = 'stdin' |
| else: |
| inf = stack.enter_context(open(defconfigs_file, encoding='utf-8')) |
| for i, line in enumerate(inf): |
| line = line.strip() |
| if not line: |
| continue # skip blank lines silently |
| if ' ' in line: |
| line = line.split(' ')[0] # handle 'git log' input |
| matched = get_matched_defconfig(line) |
| if not matched: |
| print(f"warning: {defconfigs_file}:{i + 1}: no defconfig matched '{line}'", |
| file=sys.stderr) |
| |
| defconfigs += matched |
| |
| # use set() to drop multiple matching |
| return [defconfig[len('configs') + 1:] for defconfig in set(defconfigs)] |
| |
| def get_all_defconfigs(): |
| """Get all the defconfig files under the configs/ directory. |
| |
| Returns: |
| list of str: List of paths to defconfig files |
| """ |
| defconfigs = [] |
| for (dirpath, _, filenames) in os.walk('configs'): |
| dirpath = dirpath[len('configs') + 1:] |
| for filename in fnmatch.filter(filenames, '*_defconfig'): |
| defconfigs.append(os.path.join(dirpath, filename)) |
| |
| return defconfigs |
| |
| def color_text(color_enabled, color, string): |
| """Return colored string.""" |
| if color_enabled: |
| # LF should not be surrounded by the escape sequence. |
| # Otherwise, additional whitespace or line-feed might be printed. |
| return '\n'.join([ '\033[' + color + 'm' + s + '\033[0m' if s else '' |
| for s in string.split('\n') ]) |
| return string |
| |
| def write_file(fname, data): |
| """Write data to a file |
| |
| Args: |
| fname (str): Filename to write to |
| data (list of str): Lines to write (with or without trailing newline); |
| or str to write |
| """ |
| with open(fname, 'w', encoding='utf-8') as out: |
| if isinstance(data, list): |
| for line in data: |
| print(line.rstrip('\n'), file=out) |
| else: |
| out.write(data) |
| |
| def read_file(fname, as_lines=True, skip_unicode=False): |
| """Read a file and return the contents |
| |
| Args: |
| fname (str): Filename to read from |
| as_lines (bool): Return file contents as a list of lines |
| skip_unicode (bool): True to report unicode errors and continue |
| |
| Returns: |
| iter of str: List of ;ines from the file with newline removed; str if |
| as_lines is False with newlines intact; or None if a unicode error |
| occurred |
| |
| Raises: |
| UnicodeDecodeError: Unicode error occurred when reading |
| """ |
| with open(fname, encoding='utf-8') as inf: |
| try: |
| if as_lines: |
| return [line.rstrip('\n') for line in inf.readlines()] |
| return inf.read() |
| except UnicodeDecodeError as exc: |
| if not skip_unicode: |
| raise |
| print(f"Failed on file '{fname}: {exc}") |
| return None |
| |
| def try_expand(line): |
| """If value looks like an expression, try expanding it |
| Otherwise just return the existing value |
| """ |
| if line.find('=') == -1: |
| return line |
| |
| try: |
| aeval = asteval.Interpreter( usersyms=SIZES, minimal=True ) |
| cfg, val = re.split("=", line) |
| val= val.strip('\"') |
| if re.search(r'[*+-/]|<<|SZ_+|\(([^\)]+)\)', val): |
| newval = hex(aeval(val)) |
| print(f'\tExpanded expression {val} to {newval}') |
| return cfg+'='+newval |
| except: |
| print(f'\tFailed to expand expression in {line}') |
| |
| return line |
| |
| |
| ### classes ### |
| class Progress: |
| |
| """Progress Indicator""" |
| |
| def __init__(self, total): |
| """Create a new progress indicator. |
| |
| Args: |
| total: A number of defconfig files to process. |
| """ |
| self.current = 0 |
| self.total = total |
| |
| def inc(self): |
| """Increment the number of processed defconfig files.""" |
| |
| self.current += 1 |
| |
| def show(self): |
| """Display the progress.""" |
| print(f' {self.current} defconfigs out of {self.total}\r', end=' ') |
| sys.stdout.flush() |
| |
| |
| class KconfigScanner: |
| """Kconfig scanner.""" |
| |
| def __init__(self): |
| """Scan all the Kconfig files and create a Config object.""" |
| # Define environment variables referenced from Kconfig |
| os.environ['srctree'] = os.getcwd() |
| os.environ['UBOOTVERSION'] = 'dummy' |
| os.environ['KCONFIG_OBJDIR'] = '' |
| os.environ['CC'] = 'gcc' |
| self.conf = kconfiglib.Kconfig() |
| |
| |
| class KconfigParser: |
| |
| """A parser of .config and include/autoconf.mk.""" |
| |
| re_arch = re.compile(r'CONFIG_SYS_ARCH="(.*)"') |
| re_cpu = re.compile(r'CONFIG_SYS_CPU="(.*)"') |
| |
| def __init__(self, args, build_dir): |
| """Create a new parser. |
| |
| Args: |
| args (Namespace): program arguments |
| build_dir: Build directory. |
| """ |
| self.args = args |
| self.dotconfig = os.path.join(build_dir, '.config') |
| self.autoconf = os.path.join(build_dir, 'include', 'autoconf.mk') |
| self.spl_autoconf = os.path.join(build_dir, 'spl', 'include', |
| 'autoconf.mk') |
| self.config_autoconf = os.path.join(build_dir, AUTO_CONF_PATH) |
| self.defconfig = os.path.join(build_dir, 'defconfig') |
| |
| def get_arch(self): |
| """Parse .config file and return the architecture. |
| |
| Returns: |
| Architecture name (e.g. 'arm'). |
| """ |
| arch = '' |
| cpu = '' |
| for line in read_file(self.dotconfig): |
| m_arch = self.re_arch.match(line) |
| if m_arch: |
| arch = m_arch.group(1) |
| continue |
| m_cpu = self.re_cpu.match(line) |
| if m_cpu: |
| cpu = m_cpu.group(1) |
| |
| if not arch: |
| return None |
| |
| # fix-up for aarch64 |
| if arch == 'arm' and cpu == 'armv8': |
| arch = 'aarch64' |
| |
| return arch |
| |
| |
| class DatabaseThread(threading.Thread): |
| """This thread processes results from Slot threads. |
| |
| It collects the data in the master config directary. There is only one |
| result thread, and this helps to serialise the build output. |
| """ |
| def __init__(self, config_db, db_queue): |
| """Set up a new result thread |
| |
| Args: |
| builder: Builder which will be sent each result |
| """ |
| threading.Thread.__init__(self) |
| self.config_db = config_db |
| self.db_queue= db_queue |
| |
| def run(self): |
| """Called to start up the result thread. |
| |
| We collect the next result job and pass it on to the build. |
| """ |
| while True: |
| defconfig, configs = self.db_queue.get() |
| self.config_db[defconfig] = configs |
| self.db_queue.task_done() |
| |
| |
| class Slot: |
| |
| """A slot to store a subprocess. |
| |
| Each instance of this class handles one subprocess. |
| This class is useful to control multiple threads |
| for faster processing. |
| """ |
| |
| def __init__(self, toolchains, args, progress, devnull, |
| make_cmd, reference_src_dir, db_queue): |
| """Create a new process slot. |
| |
| Args: |
| toolchains: Toolchains object containing toolchains. |
| args: Program arguments |
| progress: A progress indicator. |
| devnull: A file object of '/dev/null'. |
| make_cmd: command name of GNU Make. |
| reference_src_dir: Determine the true starting config state from this |
| source tree. |
| db_queue: output queue to write config info for the database |
| """ |
| self.toolchains = toolchains |
| self.args = args |
| self.progress = progress |
| self.build_dir = tempfile.mkdtemp() |
| self.devnull = devnull |
| self.make_cmd = (make_cmd, 'O=' + self.build_dir) |
| self.reference_src_dir = reference_src_dir |
| self.db_queue = db_queue |
| self.parser = KconfigParser(args, self.build_dir) |
| self.state = STATE_IDLE |
| self.failed_boards = set() |
| self.defconfig = None |
| self.log = '' |
| self.current_src_dir = None |
| self.proc = None |
| |
| def __del__(self): |
| """Delete the working directory |
| |
| This function makes sure the temporary directory is cleaned away |
| even if Python suddenly dies due to error. It should be done in here |
| because it is guaranteed the destructor is always invoked when the |
| instance of the class gets unreferenced. |
| |
| If the subprocess is still running, wait until it finishes. |
| """ |
| if self.state != STATE_IDLE: |
| while self.proc.poll() is None: |
| pass |
| shutil.rmtree(self.build_dir) |
| |
| def add(self, defconfig): |
| """Assign a new subprocess for defconfig and add it to the slot. |
| |
| If the slot is vacant, create a new subprocess for processing the |
| given defconfig and add it to the slot. Just returns False if |
| the slot is occupied (i.e. the current subprocess is still running). |
| |
| Args: |
| defconfig (str): defconfig name. |
| |
| Returns: |
| Return True on success or False on failure |
| """ |
| if self.state != STATE_IDLE: |
| return False |
| |
| self.defconfig = defconfig |
| self.log = '' |
| self.current_src_dir = self.reference_src_dir |
| self.do_defconfig() |
| return True |
| |
| def poll(self): |
| """Check the status of the subprocess and handle it as needed. |
| |
| Returns True if the slot is vacant (i.e. in idle state). |
| If the configuration is successfully finished, assign a new |
| subprocess to build include/autoconf.mk. |
| If include/autoconf.mk is generated, invoke the parser to |
| parse the .config and the include/autoconf.mk, moving |
| config options to the .config as needed. |
| If the .config was updated, run "make savedefconfig" to sync |
| it, update the original defconfig, and then set the slot back |
| to the idle state. |
| |
| Returns: |
| Return True if the subprocess is terminated, False otherwise |
| """ |
| if self.state == STATE_IDLE: |
| return True |
| |
| if self.proc.poll() is None: |
| return False |
| |
| if self.proc.poll() != 0: |
| self.handle_error() |
| elif self.state == STATE_DEFCONFIG: |
| if self.reference_src_dir and not self.current_src_dir: |
| self.do_savedefconfig() |
| else: |
| self.do_autoconf() |
| elif self.state == STATE_AUTOCONF: |
| if self.current_src_dir: |
| self.current_src_dir = None |
| self.do_defconfig() |
| elif self.args.build_db: |
| self.do_build_db() |
| else: |
| self.do_savedefconfig() |
| elif self.state == STATE_SAVEDEFCONFIG: |
| self.update_defconfig() |
| else: |
| sys.exit('Internal Error. This should not happen.') |
| |
| return self.state == STATE_IDLE |
| |
| def handle_error(self): |
| """Handle error cases.""" |
| |
| self.log += color_text(self.args.color, COLOR_LIGHT_RED, |
| 'Failed to process.\n') |
| if self.args.verbose: |
| self.log += color_text(self.args.color, COLOR_LIGHT_CYAN, |
| self.proc.stderr.read().decode()) |
| self.finish(False) |
| |
| def do_defconfig(self): |
| """Run 'make <board>_defconfig' to create the .config file.""" |
| |
| cmd = list(self.make_cmd) |
| cmd.append(self.defconfig) |
| self.proc = subprocess.Popen(cmd, stdout=self.devnull, |
| stderr=subprocess.PIPE, |
| cwd=self.current_src_dir) |
| self.state = STATE_DEFCONFIG |
| |
| def do_autoconf(self): |
| """Run 'make AUTO_CONF_PATH'.""" |
| |
| arch = self.parser.get_arch() |
| try: |
| tchain = self.toolchains.Select(arch) |
| except ValueError: |
| self.log += color_text(self.args.color, COLOR_YELLOW, |
| f"Tool chain for '{arch}' is missing. Do nothing.\n") |
| self.finish(False) |
| return |
| env = tchain.MakeEnvironment(False) |
| |
| cmd = list(self.make_cmd) |
| cmd.append('KCONFIG_IGNORE_DUPLICATES=1') |
| cmd.append(AUTO_CONF_PATH) |
| self.proc = subprocess.Popen(cmd, stdout=self.devnull, env=env, |
| stderr=subprocess.PIPE, |
| cwd=self.current_src_dir) |
| self.state = STATE_AUTOCONF |
| |
| def do_build_db(self): |
| """Add the board to the database""" |
| configs = {} |
| for line in read_file(os.path.join(self.build_dir, AUTO_CONF_PATH)): |
| if line.startswith('CONFIG'): |
| config, value = line.split('=', 1) |
| configs[config] = value.rstrip() |
| self.db_queue.put([self.defconfig, configs]) |
| self.finish(True) |
| |
| def do_savedefconfig(self): |
| """Update the .config and run 'make savedefconfig'.""" |
| if not self.args.force_sync: |
| self.finish(True) |
| return |
| self.log += 'Syncing by savedefconfig (forced by option)...\n' |
| |
| cmd = list(self.make_cmd) |
| cmd.append('savedefconfig') |
| self.proc = subprocess.Popen(cmd, stdout=self.devnull, |
| stderr=subprocess.PIPE) |
| self.state = STATE_SAVEDEFCONFIG |
| |
| def update_defconfig(self): |
| """Update the input defconfig and go back to the idle state.""" |
| orig_defconfig = os.path.join('configs', self.defconfig) |
| new_defconfig = os.path.join(self.build_dir, 'defconfig') |
| updated = not filecmp.cmp(orig_defconfig, new_defconfig) |
| |
| if updated: |
| self.log += color_text(self.args.color, COLOR_LIGHT_BLUE, |
| 'defconfig was updated.\n') |
| |
| if not self.args.dry_run and updated: |
| shutil.move(new_defconfig, orig_defconfig) |
| self.finish(True) |
| |
| def finish(self, success): |
| """Display log along with progress and go to the idle state. |
| |
| Args: |
| success (bool): Should be True when the defconfig was processed |
| successfully, or False when it fails. |
| """ |
| # output at least 30 characters to hide the "* defconfigs out of *". |
| log = self.defconfig.ljust(30) + '\n' |
| |
| log += '\n'.join([ ' ' + s for s in self.log.split('\n') ]) |
| # Some threads are running in parallel. |
| # Print log atomically to not mix up logs from different threads. |
| print(log, file=(sys.stdout if success else sys.stderr)) |
| |
| if not success: |
| if self.args.exit_on_error: |
| sys.exit('Exit on error.') |
| # If --exit-on-error flag is not set, skip this board and continue. |
| # Record the failed board. |
| self.failed_boards.add(self.defconfig) |
| |
| self.progress.inc() |
| self.progress.show() |
| self.state = STATE_IDLE |
| |
| def get_failed_boards(self): |
| """Returns a set of failed boards (defconfigs) in this slot. |
| """ |
| return self.failed_boards |
| |
| class Slots: |
| |
| """Controller of the array of subprocess slots.""" |
| |
| def __init__(self, toolchains, args, progress, reference_src_dir, db_queue): |
| """Create a new slots controller. |
| |
| Args: |
| toolchains: Toolchains object containing toolchains. |
| args: Program arguments |
| progress: A progress indicator. |
| reference_src_dir: Determine the true starting config state from this |
| source tree. |
| db_queue: output queue to write config info for the database |
| """ |
| self.args = args |
| self.slots = [] |
| devnull = subprocess.DEVNULL |
| make_cmd = get_make_cmd() |
| for _ in range(args.jobs): |
| self.slots.append(Slot(toolchains, args, progress, devnull, |
| make_cmd, reference_src_dir, db_queue)) |
| |
| def add(self, defconfig): |
| """Add a new subprocess if a vacant slot is found. |
| |
| Args: |
| defconfig (str): defconfig name to be put into. |
| |
| Returns: |
| Return True on success or False on failure |
| """ |
| for slot in self.slots: |
| if slot.add(defconfig): |
| return True |
| return False |
| |
| def available(self): |
| """Check if there is a vacant slot. |
| |
| Returns: |
| Return True if at lease one vacant slot is found, False otherwise. |
| """ |
| for slot in self.slots: |
| if slot.poll(): |
| return True |
| return False |
| |
| def empty(self): |
| """Check if all slots are vacant. |
| |
| Returns: |
| Return True if all the slots are vacant, False otherwise. |
| """ |
| ret = True |
| for slot in self.slots: |
| if not slot.poll(): |
| ret = False |
| return ret |
| |
| def show_failed_boards(self): |
| """Display all of the failed boards (defconfigs).""" |
| boards = set() |
| output_file = 'moveconfig.failed' |
| |
| for slot in self.slots: |
| boards |= slot.get_failed_boards() |
| |
| if boards: |
| boards = '\n'.join(boards) + '\n' |
| msg = 'The following boards were not processed due to error:\n' |
| msg += boards |
| msg += f'(the list has been saved in {output_file})\n' |
| print(color_text(self.args.color, COLOR_LIGHT_RED, |
| msg), file=sys.stderr) |
| |
| write_file(output_file, boards) |
| |
| class ReferenceSource: |
| |
| """Reference source against which original configs should be parsed.""" |
| |
| def __init__(self, commit): |
| """Create a reference source directory based on a specified commit. |
| |
| Args: |
| commit: commit to git-clone |
| """ |
| self.src_dir = tempfile.mkdtemp() |
| print('Cloning git repo to a separate work directory...') |
| subprocess.check_output(['git', 'clone', os.getcwd(), '.'], |
| cwd=self.src_dir) |
| rev = subprocess.check_output(['git', 'rev-parse', '--short', |
| commit]).strip() |
| print(f"Checkout '{rev}' to build the original autoconf.mk.") |
| subprocess.check_output(['git', 'checkout', commit], |
| stderr=subprocess.STDOUT, cwd=self.src_dir) |
| |
| def __del__(self): |
| """Delete the reference source directory |
| |
| This function makes sure the temporary directory is cleaned away |
| even if Python suddenly dies due to error. It should be done in here |
| because it is guaranteed the destructor is always invoked when the |
| instance of the class gets unreferenced. |
| """ |
| shutil.rmtree(self.src_dir) |
| |
| def get_dir(self): |
| """Return the absolute path to the reference source directory.""" |
| |
| return self.src_dir |
| |
| def move_config(toolchains, args, db_queue): |
| """Build database or sync config options to defconfig files. |
| |
| Args: |
| toolchains (Toolchains): Toolchains to use |
| args (Namespace): Program arguments |
| db_queue (Queue): Queue for database updates |
| """ |
| if args.force_sync: |
| print('Syncing defconfigs', end=' ') |
| elif args.build_db: |
| print(f'Building {CONFIG_DATABASE} database') |
| print(f'(jobs: {args.jobs})\n') |
| |
| if args.git_ref: |
| reference_src = ReferenceSource(args.git_ref) |
| reference_src_dir = reference_src.get_dir() |
| else: |
| reference_src_dir = None |
| |
| if args.defconfigs: |
| defconfigs = get_matched_defconfigs(args.defconfigs) |
| else: |
| defconfigs = get_all_defconfigs() |
| |
| progress = Progress(len(defconfigs)) |
| slots = Slots(toolchains, args, progress, reference_src_dir, db_queue) |
| |
| # Main loop to process defconfig files: |
| # Add a new subprocess into a vacant slot. |
| # Sleep if there is no available slot. |
| for defconfig in defconfigs: |
| while not slots.add(defconfig): |
| while not slots.available(): |
| # No available slot: sleep for a while |
| time.sleep(SLEEP_TIME) |
| |
| # wait until all the subprocesses finish |
| while not slots.empty(): |
| time.sleep(SLEEP_TIME) |
| |
| print('') |
| slots.show_failed_boards() |
| |
| def find_kconfig_rules(kconf, config, imply_config): |
| """Check whether a config has a 'select' or 'imply' keyword |
| |
| Args: |
| kconf (Kconfiglib.Kconfig): Kconfig object |
| config (str): Name of config to check (without CONFIG_ prefix) |
| imply_config (str): Implying config (without CONFIG_ prefix) which may |
| or may not have an 'imply' for 'config') |
| |
| Returns: |
| Symbol object for 'config' if found, else None |
| """ |
| sym = kconf.syms.get(imply_config) |
| if sym: |
| for sel, _ in (sym.selects + sym.implies): |
| if sel.name == config: |
| return sym |
| return None |
| |
| def check_imply_rule(kconf, config, imply_config): |
| """Check if we can add an 'imply' option |
| |
| This finds imply_config in the Kconfig and looks to see if it is possible |
| to add an 'imply' for 'config' to that part of the Kconfig. |
| |
| Args: |
| kconf (Kconfiglib.Kconfig): Kconfig object |
| config (str): Name of config to check (without CONFIG_ prefix) |
| imply_config (str): Implying config (without CONFIG_ prefix) which may |
| or may not have an 'imply' for 'config') |
| |
| Returns: |
| tuple: |
| str: filename of Kconfig file containing imply_config, or None if |
| none |
| int: line number within the Kconfig file, or 0 if none |
| str: message indicating the result |
| """ |
| sym = kconf.syms.get(imply_config) |
| if not sym: |
| return 'cannot find sym' |
| nodes = sym.nodes |
| if len(nodes) != 1: |
| return f'{len(nodes)} locations' |
| node = nodes[0] |
| fname, linenum = node.filename, node.linenr |
| cwd = os.getcwd() |
| if cwd and fname.startswith(cwd): |
| fname = fname[len(cwd) + 1:] |
| file_line = f' at {fname}:{linenum}' |
| data = read_file(fname) |
| if data[linenum - 1] != f'config {imply_config}': |
| return None, 0, f'bad sym format {data[linenum]}{file_line})' |
| return fname, linenum, f'adding{file_line}' |
| |
| def add_imply_rule(config, fname, linenum): |
| """Add a new 'imply' option to a Kconfig |
| |
| Args: |
| config (str): config option to add an imply for (without CONFIG_ prefix) |
| fname (str): Kconfig filename to update |
| linenum (int): Line number to place the 'imply' before |
| |
| Returns: |
| Message indicating the result |
| """ |
| file_line = f' at {fname}:{linenum}' |
| data = read_file(fname) |
| linenum -= 1 |
| |
| for offset, line in enumerate(data[linenum:]): |
| if line.strip().startswith('help') or not line: |
| data.insert(linenum + offset, f'\timply {config}') |
| write_file(fname, data) |
| return f'added{file_line}' |
| |
| return 'could not insert%s' |
| |
| (IMPLY_MIN_2, IMPLY_TARGET, IMPLY_CMD, IMPLY_NON_ARCH_BOARD) = ( |
| 1, 2, 4, 8) |
| |
| IMPLY_FLAGS = { |
| 'min2': [IMPLY_MIN_2, 'Show options which imply >2 boards (normally >5)'], |
| 'target': [IMPLY_TARGET, 'Allow CONFIG_TARGET_... options to imply'], |
| 'cmd': [IMPLY_CMD, 'Allow CONFIG_CMD_... to imply'], |
| 'non-arch-board': [ |
| IMPLY_NON_ARCH_BOARD, |
| 'Allow Kconfig options outside arch/ and /board/ to imply'], |
| } |
| |
| |
| def read_database(): |
| """Read in the config database |
| |
| Returns: |
| tuple: |
| set of all config options seen (each a str) |
| set of all defconfigs seen (each a str) |
| dict of configs for each defconfig: |
| key: defconfig name, e.g. "MPC8548CDS_legacy_defconfig" |
| value: dict: |
| key: CONFIG option |
| value: Value of option |
| dict of defconfigs for each config: |
| key: CONFIG option |
| value: set of boards using that option |
| |
| """ |
| configs = {} |
| |
| # key is defconfig name, value is dict of (CONFIG_xxx, value) |
| config_db = {} |
| |
| # Set of all config options we have seen |
| all_configs = set() |
| |
| # Set of all defconfigs we have seen |
| all_defconfigs = set() |
| |
| defconfig_db = collections.defaultdict(set) |
| for line in read_file(CONFIG_DATABASE): |
| line = line.rstrip() |
| if not line: # Separator between defconfigs |
| config_db[defconfig] = configs |
| all_defconfigs.add(defconfig) |
| configs = {} |
| elif line[0] == ' ': # CONFIG line |
| config, value = line.strip().split('=', 1) |
| configs[config] = value |
| defconfig_db[config].add(defconfig) |
| all_configs.add(config) |
| else: # New defconfig |
| defconfig = line |
| |
| return all_configs, all_defconfigs, config_db, defconfig_db |
| |
| |
| def do_imply_config(config_list, add_imply, imply_flags, skip_added, |
| check_kconfig=True, find_superset=False): |
| """Find CONFIG options which imply those in the list |
| |
| Some CONFIG options can be implied by others and this can help to reduce |
| the size of the defconfig files. For example, CONFIG_X86 implies |
| CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and |
| all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to |
| each of the x86 defconfig files. |
| |
| This function uses the moveconfig database to find such options. It |
| displays a list of things that could possibly imply those in the list. |
| The algorithm ignores any that start with CONFIG_TARGET since these |
| typically refer to only a few defconfigs (often one). It also does not |
| display a config with less than 5 defconfigs. |
| |
| The algorithm works using sets. For each target config in config_list: |
| - Get the set 'defconfigs' which use that target config |
| - For each config (from a list of all configs): |
| - Get the set 'imply_defconfig' of defconfigs which use that config |
| - |
| - If imply_defconfigs contains anything not in defconfigs then |
| this config does not imply the target config |
| |
| Params: |
| config_list: List of CONFIG options to check (each a string) |
| add_imply: Automatically add an 'imply' for each config. |
| imply_flags: Flags which control which implying configs are allowed |
| (IMPLY_...) |
| skip_added: Don't show options which already have an imply added. |
| check_kconfig: Check if implied symbols already have an 'imply' or |
| 'select' for the target config, and show this information if so. |
| find_superset: True to look for configs which are a superset of those |
| already found. So for example if CONFIG_EXYNOS5 implies an option, |
| but CONFIG_EXYNOS covers a larger set of defconfigs and also |
| implies that option, this will drop the former in favour of the |
| latter. In practice this option has not proved very used. |
| |
| Note the terminoloy: |
| config - a CONFIG_XXX options (a string, e.g. 'CONFIG_CMD_EEPROM') |
| defconfig - a defconfig file (a string, e.g. 'configs/snow_defconfig') |
| """ |
| kconf = KconfigScanner().conf if check_kconfig else None |
| if add_imply and add_imply != 'all': |
| add_imply = add_imply.split(',') |
| |
| all_configs, all_defconfigs, _, defconfig_db = read_database() |
| |
| # Work through each target config option in turn, independently |
| for config in config_list: |
| defconfigs = defconfig_db.get(config) |
| if not defconfigs: |
| print(f'{config} not found in any defconfig') |
| continue |
| |
| # Get the set of defconfigs without this one (since a config cannot |
| # imply itself) |
| non_defconfigs = all_defconfigs - defconfigs |
| num_defconfigs = len(defconfigs) |
| print(f'{config} found in {num_defconfigs}/{len(all_configs)} defconfigs') |
| |
| # This will hold the results: key=config, value=defconfigs containing it |
| imply_configs = {} |
| rest_configs = all_configs - set([config]) |
| |
| # Look at every possible config, except the target one |
| for imply_config in rest_configs: |
| if 'ERRATUM' in imply_config: |
| continue |
| if not imply_flags & IMPLY_CMD: |
| if 'CONFIG_CMD' in imply_config: |
| continue |
| if not imply_flags & IMPLY_TARGET: |
| if 'CONFIG_TARGET' in imply_config: |
| continue |
| |
| # Find set of defconfigs that have this config |
| imply_defconfig = defconfig_db[imply_config] |
| |
| # Get the intersection of this with defconfigs containing the |
| # target config |
| common_defconfigs = imply_defconfig & defconfigs |
| |
| # Get the set of defconfigs containing this config which DO NOT |
| # also contain the taret config. If this set is non-empty it means |
| # that this config affects other defconfigs as well as (possibly) |
| # the ones affected by the target config. This means it implies |
| # things we don't want to imply. |
| not_common_defconfigs = imply_defconfig & non_defconfigs |
| if not_common_defconfigs: |
| continue |
| |
| # If there are common defconfigs, imply_config may be useful |
| if common_defconfigs: |
| skip = False |
| if find_superset: |
| for prev in list(imply_configs.keys()): |
| prev_count = len(imply_configs[prev]) |
| count = len(common_defconfigs) |
| if (prev_count > count and |
| (imply_configs[prev] & common_defconfigs == |
| common_defconfigs)): |
| # skip imply_config because prev is a superset |
| skip = True |
| break |
| if count > prev_count: |
| # delete prev because imply_config is a superset |
| del imply_configs[prev] |
| if not skip: |
| imply_configs[imply_config] = common_defconfigs |
| |
| # Now we have a dict imply_configs of configs which imply each config |
| # The value of each dict item is the set of defconfigs containing that |
| # config. Rank them so that we print the configs that imply the largest |
| # number of defconfigs first. |
| ranked_iconfigs = sorted(imply_configs, |
| key=lambda k: len(imply_configs[k]), reverse=True) |
| kconfig_info = '' |
| cwd = os.getcwd() |
| add_list = collections.defaultdict(list) |
| for iconfig in ranked_iconfigs: |
| num_common = len(imply_configs[iconfig]) |
| |
| # Don't bother if there are less than 5 defconfigs affected. |
| if num_common < (2 if imply_flags & IMPLY_MIN_2 else 5): |
| continue |
| missing = defconfigs - imply_configs[iconfig] |
| missing_str = ', '.join(missing) if missing else 'all' |
| missing_str = '' |
| show = True |
| if kconf: |
| sym = find_kconfig_rules(kconf, config[CONFIG_LEN:], |
| iconfig[CONFIG_LEN:]) |
| kconfig_info = '' |
| if sym: |
| nodes = sym.nodes |
| if len(nodes) == 1: |
| fname, linenum = nodes[0].filename, nodes[0].linenr |
| if cwd and fname.startswith(cwd): |
| fname = fname[len(cwd) + 1:] |
| kconfig_info = f'{fname}:{linenum}' |
| if skip_added: |
| show = False |
| else: |
| sym = kconf.syms.get(iconfig[CONFIG_LEN:]) |
| fname = '' |
| if sym: |
| nodes = sym.nodes |
| if len(nodes) == 1: |
| fname, linenum = nodes[0].filename, nodes[0].linenr |
| if cwd and fname.startswith(cwd): |
| fname = fname[len(cwd) + 1:] |
| in_arch_board = not sym or (fname.startswith('arch') or |
| fname.startswith('board')) |
| if (not in_arch_board and |
| not imply_flags & IMPLY_NON_ARCH_BOARD): |
| continue |
| |
| if add_imply and (add_imply == 'all' or |
| iconfig in add_imply): |
| fname, linenum, kconfig_info = (check_imply_rule(kconf, |
| config[CONFIG_LEN:], iconfig[CONFIG_LEN:])) |
| if fname: |
| add_list[fname].append(linenum) |
| |
| if show and kconfig_info != 'skip': |
| print(f'{num_common:5d} : ' |
| f'{iconfig.ljust(30):-30s}{kconfig_info:-25s} {missing_str}') |
| |
| # Having collected a list of things to add, now we add them. We process |
| # each file from the largest line number to the smallest so that |
| # earlier additions do not affect our line numbers. E.g. if we added an |
| # imply at line 20 it would change the position of each line after |
| # that. |
| for fname, linenums in add_list.items(): |
| for linenum in sorted(linenums, reverse=True): |
| add_imply_rule(config[CONFIG_LEN:], fname, linenum) |
| |
| def defconfig_matches(configs, re_match): |
| """Check if any CONFIG option matches a regex |
| |
| The match must be complete, i.e. from the start to end of the CONFIG option. |
| |
| Args: |
| configs (dict): Dict of CONFIG options: |
| key: CONFIG option |
| value: Value of option |
| re_match (re.Pattern): Match to check |
| |
| Returns: |
| bool: True if any CONFIG matches the regex |
| """ |
| for cfg in configs: |
| if re_match.fullmatch(cfg): |
| return True |
| return False |
| |
| def do_find_config(config_list): |
| """Find boards with a given combination of CONFIGs |
| |
| Params: |
| config_list: List of CONFIG options to check (each a regex consisting |
| of a config option, with or without a CONFIG_ prefix. If an option |
| is preceded by a tilde (~) then it must be false, otherwise it must |
| be true) |
| """ |
| _, all_defconfigs, config_db, _ = read_database() |
| |
| # Start with all defconfigs |
| out = all_defconfigs |
| |
| # Work through each config in turn |
| for item in config_list: |
| # Get the real config name and whether we want this config or not |
| cfg = item |
| want = True |
| if cfg[0] == '~': |
| want = False |
| cfg = cfg[1:] |
| |
| # Search everything that is still in the running. If it has a config |
| # that we want, or doesn't have one that we don't, add it into the |
| # running for the next stage |
| in_list = out |
| out = set() |
| re_match = re.compile(cfg) |
| for defc in in_list: |
| has_cfg = defconfig_matches(config_db[defc], re_match) |
| if has_cfg == want: |
| out.add(defc) |
| print(f'{len(out)} matches') |
| print(' '.join(item.split('_defconfig')[0] for item in out)) |
| |
| |
| def prefix_config(cfg): |
| """Prefix a config with CONFIG_ if needed |
| |
| This handles ~ operator, which indicates that the CONFIG should be disabled |
| |
| >>> prefix_config('FRED') |
| 'CONFIG_FRED' |
| >>> prefix_config('CONFIG_FRED') |
| 'CONFIG_FRED' |
| >>> prefix_config('~FRED') |
| '~CONFIG_FRED' |
| >>> prefix_config('~CONFIG_FRED') |
| '~CONFIG_FRED' |
| >>> prefix_config('A123') |
| 'CONFIG_A123' |
| """ |
| oper = '' |
| if cfg[0] == '~': |
| oper = cfg[0] |
| cfg = cfg[1:] |
| if not cfg.startswith('CONFIG_'): |
| cfg = 'CONFIG_' + cfg |
| return oper + cfg |
| |
| |
| RE_MK_CONFIGS = re.compile(r'CONFIG_(\$\(SPL_(?:TPL_)?\))?([A-Za-z0-9_]*)') |
| RE_IFDEF = re.compile(r'(ifdef|ifndef)') |
| RE_C_CONFIGS = re.compile(r'CONFIG_([A-Za-z0-9_]*)') |
| RE_CONFIG_IS = re.compile(r'CONFIG_IS_ENABLED\(([A-Za-z0-9_]*)\)') |
| |
| class ConfigUse: |
| def __init__(self, cfg, is_spl, fname, rest): |
| self.cfg = cfg |
| self.is_spl = is_spl |
| self.fname = fname |
| self.rest = rest |
| |
| def __hash__(self): |
| return hash((self.cfg, self.is_spl)) |
| |
| def scan_makefiles(fnames): |
| """Scan Makefiles looking for Kconfig options |
| |
| Looks for uses of CONFIG options in Makefiles |
| |
| Args: |
| fnames (list of tuple): |
| str: Makefile filename where the option was found |
| str: Line of the Makefile |
| |
| Returns: |
| tuple: |
| dict: all_uses |
| key (ConfigUse): object |
| value (list of str): matching lines |
| dict: Uses by filename |
| key (str): filename |
| value (set of ConfigUse): uses in that filename |
| |
| >>> RE_MK_CONFIGS.search('CONFIG_FRED').groups() |
| (None, 'FRED') |
| >>> RE_MK_CONFIGS.search('CONFIG_$(SPL_)MARY').groups() |
| ('$(SPL_)', 'MARY') |
| >>> RE_MK_CONFIGS.search('CONFIG_$(SPL_TPL_)MARY').groups() |
| ('$(SPL_TPL_)', 'MARY') |
| """ |
| all_uses = collections.defaultdict(list) |
| fname_uses = {} |
| for fname, rest in fnames: |
| m_iter = RE_MK_CONFIGS.finditer(rest) |
| for mat in m_iter: |
| real_opt = mat.group(2) |
| if real_opt == '': |
| continue |
| is_spl = False |
| if mat.group(1): |
| is_spl = True |
| use = ConfigUse(real_opt, is_spl, fname, rest) |
| if fname not in fname_uses: |
| fname_uses[fname] = set() |
| fname_uses[fname].add(use) |
| all_uses[use].append(rest) |
| return all_uses, fname_uses |
| |
| |
| def scan_src_files(fnames): |
| """Scan source files (other than Makefiles) looking for Kconfig options |
| |
| Looks for uses of CONFIG options |
| |
| Args: |
| fnames (list of tuple): |
| str: Makefile filename where the option was found |
| str: Line of the Makefile |
| |
| Returns: |
| tuple: |
| dict: all_uses |
| key (ConfigUse): object |
| value (list of str): matching lines |
| dict: Uses by filename |
| key (str): filename |
| value (set of ConfigUse): uses in that filename |
| |
| >>> RE_C_CONFIGS.search('CONFIG_FRED').groups() |
| ('FRED',) |
| >>> RE_CONFIG_IS.search('CONFIG_IS_ENABLED(MARY)').groups() |
| ('MARY',) |
| >>> RE_CONFIG_IS.search('#if CONFIG_IS_ENABLED(OF_PLATDATA)').groups() |
| ('OF_PLATDATA',) |
| """ |
| fname = None |
| rest = None |
| |
| def add_uses(m_iter, is_spl): |
| for mat in m_iter: |
| real_opt = mat.group(1) |
| if real_opt == '': |
| continue |
| use = ConfigUse(real_opt, is_spl, fname, rest) |
| if fname not in fname_uses: |
| fname_uses[fname] = set() |
| fname_uses[fname].add(use) |
| all_uses[use].append(rest) |
| |
| all_uses = collections.defaultdict(list) |
| fname_uses = {} |
| for fname, rest in fnames: |
| m_iter = RE_C_CONFIGS.finditer(rest) |
| add_uses(m_iter, False) |
| |
| m_iter2 = RE_CONFIG_IS.finditer(rest) |
| add_uses(m_iter2, True) |
| |
| return all_uses, fname_uses |
| |
| |
| MODE_NORMAL, MODE_SPL, MODE_PROPER = range(3) |
| |
| def do_scan_source(path, do_update): |
| """Scan the source tree for Kconfig inconsistencies |
| |
| Args: |
| path (str): Path to source tree |
| do_update (bool) : True to write to scripts/kconf_... files |
| """ |
| def is_not_proper(name): |
| for prefix in SPL_PREFIXES: |
| if name.startswith(prefix): |
| return name[len(prefix):] |
| return False |
| |
| def check_not_found(all_uses, spl_mode): |
| """Check for Kconfig options mentioned in the source but not in Kconfig |
| |
| Args: |
| all_uses (dict): |
| key (ConfigUse): object |
| value (list of str): matching lines |
| spl_mode (int): If MODE_SPL, look at source code which implies |
| an SPL_ option, but for which there is none; |
| for MOD_PROPER, look at source code which implies a Proper |
| option (i.e. use of CONFIG_IS_ENABLED() or $(SPL_) or |
| $(SPL_TPL_) but for which there none; |
| if MODE_NORMAL, ignore SPL |
| |
| Returns: |
| dict: |
| key (str): CONFIG name (without 'CONFIG_' prefix |
| value (list of ConfigUse): List of uses of this CONFIG |
| """ |
| # Make sure we know about all the options |
| not_found = collections.defaultdict(list) |
| for use, _ in all_uses.items(): |
| name = use.cfg |
| if name in IGNORE_SYMS: |
| continue |
| check = True |
| |
| if spl_mode == MODE_SPL: |
| check = use.is_spl |
| |
| # If it is an SPL symbol, try prepending all SPL_ prefixes to |
| # find at least one SPL symbol |
| if use.is_spl: |
| for prefix in SPL_PREFIXES: |
| try_name = prefix + name |
| sym = kconf.syms.get(try_name) |
| if sym: |
| break |
| if not sym: |
| not_found[f'SPL_{name}'].append(use) |
| continue |
| elif spl_mode == MODE_PROPER: |
| # Try to find the Proper version of this symbol, i.e. without |
| # the SPL_ prefix |
| proper_name = is_not_proper(name) |
| if proper_name: |
| name = proper_name |
| elif not use.is_spl: |
| check = False |
| else: # MODE_NORMAL |
| sym = kconf.syms.get(name) |
| if not sym: |
| proper_name = is_not_proper(name) |
| if proper_name: |
| name = proper_name |
| sym = kconf.syms.get(name) |
| if not sym: |
| for prefix in SPL_PREFIXES: |
| try_name = prefix + name |
| sym = kconf.syms.get(try_name) |
| if sym: |
| break |
| if not sym: |
| not_found[name].append(use) |
| continue |
| |
| sym = kconf.syms.get(name) |
| if not sym and check: |
| not_found[name].append(use) |
| return not_found |
| |
| def show_uses(uses): |
| """Show a list of uses along with their filename and code snippet |
| |
| Args: |
| uses (dict): |
| key (str): CONFIG name (without 'CONFIG_' prefix |
| value (list of ConfigUse): List of uses of this CONFIG |
| """ |
| for name in sorted(uses): |
| print(f'{name}: ', end='') |
| for i, use in enumerate(uses[name]): |
| print(f'{" " if i else ""}{use.fname}: {use.rest.strip()}') |
| |
| |
| print('Scanning Kconfig') |
| kconf = KconfigScanner().conf |
| print(f'Scanning source in {path}') |
| args = ['git', 'grep', '-E', r'IS_ENABLED|\bCONFIG'] |
| with subprocess.Popen(args, stdout=subprocess.PIPE) as proc: |
| out, _ = proc.communicate() |
| lines = out.splitlines() |
| re_fname = re.compile('^([^:]*):(.*)') |
| src_list = [] |
| mk_list = [] |
| for line in lines: |
| linestr = line.decode('utf-8') |
| m_fname = re_fname.search(linestr) |
| if not m_fname: |
| continue |
| fname, rest = m_fname.groups() |
| dirname, leaf = os.path.split(fname) |
| root, ext = os.path.splitext(leaf) |
| if ext == '.autoconf': |
| pass |
| elif ext in ['.c', '.h', '.S', '.lds', '.dts', '.dtsi', '.asl', '.cfg', |
| '.env', '.tmpl']: |
| src_list.append([fname, rest]) |
| elif 'Makefile' in root or ext == '.mk': |
| mk_list.append([fname, rest]) |
| elif ext in ['.yml', '.sh', '.py', '.awk', '.pl', '.rst', '', '.sed']: |
| pass |
| elif 'Kconfig' in root or 'Kbuild' in root: |
| pass |
| elif 'README' in root: |
| pass |
| elif dirname in ['configs']: |
| pass |
| elif dirname.startswith('doc') or dirname.startswith('scripts/kconfig'): |
| pass |
| else: |
| print(f'Not sure how to handle file {fname}') |
| |
| # Scan the Makefiles |
| all_uses, _ = scan_makefiles(mk_list) |
| |
| spl_not_found = set() |
| proper_not_found = set() |
| |
| # Make sure we know about all the options |
| print('\nCONFIG options present in Makefiles but not Kconfig:') |
| not_found = check_not_found(all_uses, MODE_NORMAL) |
| show_uses(not_found) |
| |
| print('\nCONFIG options present in Makefiles but not Kconfig (SPL):') |
| not_found = check_not_found(all_uses, MODE_SPL) |
| show_uses(not_found) |
| spl_not_found |= {is_not_proper(key) or key for key in not_found.keys()} |
| |
| print('\nCONFIG options used as Proper in Makefiles but without a non-SPL_ variant:') |
| not_found = check_not_found(all_uses, MODE_PROPER) |
| show_uses(not_found) |
| proper_not_found |= {not_found.keys()} |
| |
| # Scan the source code |
| all_uses, _ = scan_src_files(src_list) |
| |
| # Make sure we know about all the options |
| print('\nCONFIG options present in source but not Kconfig:') |
| not_found = check_not_found(all_uses, MODE_NORMAL) |
| show_uses(not_found) |
| |
| print('\nCONFIG options present in source but not Kconfig (SPL):') |
| not_found = check_not_found(all_uses, MODE_SPL) |
| show_uses(not_found) |
| spl_not_found |= {is_not_proper(key) or key for key in not_found.keys()} |
| |
| print('\nCONFIG options used as Proper in source but without a non-SPL_ variant:') |
| not_found = check_not_found(all_uses, MODE_PROPER) |
| show_uses(not_found) |
| proper_not_found |= {not_found.keys()} |
| |
| print('\nCONFIG options used as SPL but without an SPL_ variant:') |
| for item in sorted(spl_not_found): |
| print(f' {item}') |
| |
| print('\nCONFIG options used as Proper but without a non-SPL_ variant:') |
| for item in sorted(proper_not_found): |
| print(f' {item}') |
| |
| # Write out the updated information |
| if do_update: |
| with open(os.path.join(path, 'scripts', 'conf_nospl'), 'w', |
| encoding='utf-8') as out: |
| print('# These options should not be enabled in SPL builds\n', |
| file=out) |
| for item in sorted(spl_not_found): |
| print(item, file=out) |
| with open(os.path.join(path, 'scripts', 'conf_noproper'), 'w', |
| encoding='utf-8') as out: |
| print('# These options should not be enabled in Proper builds\n', |
| file=out) |
| for item in sorted(proper_not_found): |
| print(item, file=out) |
| |
| |
| def main(): |
| try: |
| cpu_count = multiprocessing.cpu_count() |
| except NotImplementedError: |
| cpu_count = 1 |
| |
| epilog = '''Move config options from headers to defconfig files. See |
| doc/develop/moveconfig.rst for documentation.''' |
| |
| parser = ArgumentParser(epilog=epilog) |
| # Add arguments here |
| parser.add_argument('-a', '--add-imply', type=str, default='', |
| help='comma-separated list of CONFIG options to add ' |
| "an 'imply' statement to for the CONFIG in -i") |
| parser.add_argument('-A', '--skip-added', action='store_true', default=False, |
| help="don't show options which are already marked as " |
| 'implying others') |
| parser.add_argument('-b', '--build-db', action='store_true', default=False, |
| help='build a CONFIG database') |
| parser.add_argument('-c', '--color', action='store_true', default=False, |
| help='display the log in color') |
| parser.add_argument('-C', '--commit', action='store_true', default=False, |
| help='Create a git commit for the operation') |
| parser.add_argument('-d', '--defconfigs', type=str, |
| help='a file containing a list of defconfigs to move, ' |
| "one per line (for example 'snow_defconfig') " |
| "or '-' to read from stdin") |
| parser.add_argument('-e', '--exit-on-error', action='store_true', |
| default=False, |
| help='exit immediately on any error') |
| parser.add_argument('-f', '--find', action='store_true', default=False, |
| help='Find boards with a given config combination') |
| parser.add_argument('-i', '--imply', action='store_true', default=False, |
| help='find options which imply others') |
| parser.add_argument('-I', '--imply-flags', type=str, default='', |
| help="control the -i option ('help' for help") |
| parser.add_argument('-j', '--jobs', type=int, default=cpu_count, |
| help='the number of jobs to run simultaneously') |
| parser.add_argument('-n', '--dry-run', action='store_true', default=False, |
| help='perform a trial run (show log with no changes)') |
| parser.add_argument('-r', '--git-ref', type=str, |
| help='the git ref to clone for building the autoconf.mk') |
| parser.add_argument('-s', '--force-sync', action='store_true', default=False, |
| help='force sync by savedefconfig') |
| parser.add_argument('-S', '--spl', action='store_true', default=False, |
| help='parse config options defined for SPL build') |
| parser.add_argument('--scan-source', action='store_true', default=False, |
| help='scan source for uses of CONFIG options') |
| parser.add_argument('-t', '--test', action='store_true', default=False, |
| help='run unit tests') |
| parser.add_argument('-y', '--yes', action='store_true', default=False, |
| help="respond 'yes' to any prompts") |
| parser.add_argument('-u', '--update', action='store_true', default=False, |
| help="update scripts/ files (use with --scan-source)") |
| parser.add_argument('-v', '--verbose', action='store_true', default=False, |
| help='show any build errors as boards are built') |
| parser.add_argument('configs', nargs='*') |
| |
| args = parser.parse_args() |
| |
| if args.test: |
| sys.argv = [sys.argv[0]] |
| fail, _ = doctest.testmod() |
| if fail: |
| return 1 |
| unittest.main() |
| |
| if args.scan_source: |
| do_scan_source(os.getcwd(), args.update) |
| return 0 |
| |
| if not any((args.force_sync, args.build_db, args.imply, args.find)): |
| parser.print_usage() |
| sys.exit(1) |
| |
| # prefix the option name with CONFIG_ if missing |
| configs = [prefix_config(cfg) for cfg in args.configs] |
| |
| check_top_directory() |
| |
| if args.imply: |
| imply_flags = 0 |
| if args.imply_flags == 'all': |
| imply_flags = -1 |
| |
| elif args.imply_flags: |
| for flag in args.imply_flags.split(','): |
| bad = flag not in IMPLY_FLAGS |
| if bad: |
| print(f"Invalid flag '{flag}'") |
| if flag == 'help' or bad: |
| print("Imply flags: (separate with ',')") |
| for name, info in IMPLY_FLAGS.items(): |
| print(f' {name:-15s}: {info[1]}') |
| parser.print_usage() |
| sys.exit(1) |
| imply_flags |= IMPLY_FLAGS[flag][0] |
| |
| do_imply_config(configs, args.add_imply, imply_flags, args.skip_added) |
| return 0 |
| |
| if args.find: |
| do_find_config(configs) |
| return 0 |
| |
| # We are either building the database or forcing a sync of defconfigs |
| config_db = {} |
| db_queue = queue.Queue() |
| dbt = DatabaseThread(config_db, db_queue) |
| dbt.daemon = True |
| dbt.start() |
| |
| check_clean_directory() |
| bsettings.setup('') |
| toolchains = toolchain.Toolchains() |
| toolchains.GetSettings() |
| toolchains.Scan(verbose=False) |
| move_config(toolchains, args, db_queue) |
| db_queue.join() |
| |
| if args.commit: |
| subprocess.call(['git', 'add', '-u']) |
| if configs: |
| msg = 'Convert %s %sto Kconfig' % (configs[0], |
| 'et al ' if len(configs) > 1 else '') |
| msg += ('\n\nThis converts the following to Kconfig:\n %s\n' % |
| '\n '.join(configs)) |
| else: |
| msg = 'configs: Resync with savedefconfig' |
| msg += '\n\nRsync all defconfig files using moveconfig.py' |
| subprocess.call(['git', 'commit', '-s', '-m', msg]) |
| |
| if args.build_db: |
| with open(CONFIG_DATABASE, 'w', encoding='utf-8') as outf: |
| for defconfig, configs in config_db.items(): |
| outf.write(f'{defconfig}\n') |
| for config in sorted(configs.keys()): |
| outf.write(f' {config}={configs[config]}\n') |
| outf.write('\n') |
| return 0 |
| |
| |
| if __name__ == '__main__': |
| sys.exit(main()) |