include/configs/mgsuvd.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2007
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 /*
  * board/config.h - configuration options, board specific
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_MPC866		1	/* This is a MPC866 CPU		*/
 #define CONFIG_MGSUVD		1	/* ...on a mgsuvd board	*/

 /* Do boardspecific init */
 #define CONFIG_BOARD_EARLY_INIT_R       1

 #define CONFIG_8xx_GCLK_FREQ		66000000

 #define CFG_SMC_UCODE_PATCH	1	/* Relocate SMC1 */
 #define CFG_SMC_DPMEM_OFFSET	0x1fc0
 #define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/

 #define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/

 #define CONFIG_BOOTCOUNT_LIMIT

 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/

 #define CONFIG_BOARD_TYPES	1	/* support board types		*/

 #define CONFIG_PREBOOT	"echo;" \
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"

 #undef	CONFIG_BOOTARGS

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"	\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"flash_nfs=run nfsargs addip;"					\
 		"bootm ${kernel_addr}\0"				\
 	"flash_self=run ramargs addip;"					\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
 		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;"\
 		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/mgsuvd/uImage\0"				\
 	"fdt_addr=400000\0"						\
 	"kernel_addr=200000\0"						\
 	"fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0"			\
 	"load=tftp 200000 ${u-boot}\0"					\
 	"update=protect off f0000000 +${filesize};"			\
 		"erase f0000000 +${filesize};"				\
 		"cp.b 200000 f0000000 ${filesize};"			\
 		"protect on f0000000 +${filesize}\0"			\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"

 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_BOOTFILESIZE

 #undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/

 #define	CONFIG_TIMESTAMP		/* but print image timestmps	*/

 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING

 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/

 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif

 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS		16	/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x100000	/* default load address */

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
  */
 /*-----------------------------------------------------------------------
  * Internal Memory Mapped Register
  */
 #define CFG_IMMR		0xFFF00000

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xf0000000
 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 /*-----------------------------------------------------------------------
  * FLASH organization
  */
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CFG_FLASH_SIZE		32
 #define CFG_FLASH_CFI
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */


 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
 #define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
 #define CFG_ENV_SECT_SIZE	0x40000 /* Total Size of Environment Sector	*/

 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)

 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */

 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 #endif

 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
  * SYPCR can only be written once after reset!
  *-----------------------------------------------------------------------
  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
  */
 #define CFG_SYPCR	0xffffff89

 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				11-6
  *-----------------------------------------------------------------------
  */
 #define CFG_SIUMCR	0x00610480

 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
  * Clear Reference Interrupt Status, Timebase freezing enabled
  */
 #define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

 /*-----------------------------------------------------------------------
  * PISCR - Periodic Interrupt Status and Control		11-31
  *-----------------------------------------------------------------------
  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
  */
 #define CFG_PISCR	(PISCR_PS | PISCR_PITF)

 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
  * Set clock output, timebase and RTC source and divider,
  * power management and some other internal clocks
  */
 #define SCCR_MASK	0x01800000
 #define CFG_SCCR	0x01800000

 #define CFG_DER 0

 /*
  * Init Memory Controller:
  *
  * BR0/1 and OR0/1 (FLASH)
  */

 #define FLASH_BASE0_PRELIM	0xf0000000	/* FLASH bank #0	*/

 /* used to re-map FLASH both when starting from SRAM or FLASH:
  * restrict access enough to keep SRAM working (if any)
  * but not too much to meddle with FLASH accesses
  */
 #define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
 #define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */

 /*
  * FLASH timing: Default value of OR0 after reset
  */
 #define CFG_OR0_PRELIM	0xfe000954
 #define CFG_BR0_PRELIM	0xf0000401

 /*
  * BR1 and OR1 (SDRAM)
  *
  */
 #define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
 #define SDRAM_MAX_SIZE		(64 << 20)	/* max 64 MB per bank	*/

 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
 #define CFG_OR_TIMING_SDRAM	0x00000A00

 #define CFG_OR1_PRELIM	0xfc000800
 #define CFG_BR1_PRELIM	(0x000000C0 | 0x01)

 #define CFG_MPTPR	0x0200
 /* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
    1 Write loop Cycle (not used), 1 Timer Loop Cycle */
 #define CFG_MBMR	0x10964111
 #define CFG_MAR		0x00000088

 /*
  * 4096	Rows from SDRAM example configuration
  * 1000	factor s -> ms
  * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
  * 4	Number of refresh cycles per period
  * 64	Refresh cycle in ms per number of rows
  */
 #define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))

 /* GPIO/PIGGY on CS3 initialization values
 */
 #define CFG_PIGGY_BASE	(0x30000000)
 #define CFG_OR3_PRELIM	(0xfe000d24)
 #define CFG_BR3_PRELIM	(0x30000401)

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/

 #define CONFIG_SCC3_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 #define CONFIG_HAS_ETH0

 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1

 #define OF_CPU			"PowerPC,866@0"
 #define OF_SOC			"soc@fff00000"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@a80"

 #endif	/* __CONFIG_H */
	/*
	* (C) Copyright 2007
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	/*
	* board/config.h - configuration options, board specific
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_MPC866 1 /* This is a MPC866 CPU */
	#define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */

	/* Do boardspecific init */
	#define CONFIG_BOARD_EARLY_INIT_R 1

	#define CONFIG_8xx_GCLK_FREQ 66000000

	#define CFG_SMC_UCODE_PATCH 1 /* Relocate SMC1 */
	#define CFG_SMC_DPMEM_OFFSET 0x1fc0
	#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */

	#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */

	#define CONFIG_BOOTCOUNT_LIMIT

	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */

	#define CONFIG_BOARD_TYPES 1 /* support board types */

	#define CONFIG_PREBOOT "echo;" \
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

	#undef CONFIG_BOOTARGS

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}\0" \
	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	"addip=setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off panic=1\0" \
	"flash_nfs=run nfsargs addip;" \
	"bootm ${kernel_addr}\0" \
	"flash_self=run ramargs addip;" \
	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
	"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;"\
	"bootm ${kernel_addr} - ${fdt_addr}\0" \
	"rootpath=/opt/eldk/ppc_8xx\0" \
	"bootfile=/tftpboot/mgsuvd/uImage\0" \
	"fdt_addr=400000\0" \
	"kernel_addr=200000\0" \
	"fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0" \
	"load=tftp 200000 ${u-boot}\0" \
	"update=protect off f0000000 +${filesize};" \
	"erase f0000000 +${filesize};" \
	"cp.b 200000 f0000000 ${filesize};" \
	"protect on f0000000 +${filesize}\0" \
	""
	#define CONFIG_BOOTCOMMAND "run flash_self"

	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */

	#undef CONFIG_WATCHDOG /* watchdog disabled */

	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_SUBNETMASK
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_BOOTFILESIZE

	#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */

	#define CONFIG_TIMESTAMP /* but print image timestmps */

	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_NFS
	#define CONFIG_CMD_PING

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */

	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
	#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
	#ifdef CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "
	#endif

	#if defined(CONFIG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */

	#define CFG_LOAD_ADDR 0x100000 /* default load address */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

	/*
	* Low Level Configuration Settings
	* (address mappings, register initial values, etc.)
	* You should know what you are doing if you make changes here.
	*/
	/*-----------------------------------------------------------------------
	* Internal Memory Mapped Register
	*/
	#define CFG_IMMR 0xFFF00000

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/
	#define CFG_INIT_RAM_ADDR CFG_IMMR
	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CFG_SDRAM_BASE _must_ start at 0
	*/
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_FLASH_BASE 0xf0000000
	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_MONITOR_BASE CFG_FLASH_BASE
	#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*-----------------------------------------------------------------------
	* FLASH organization
	*/
	#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
	#define CFG_FLASH_SIZE 32
	#define CFG_FLASH_CFI
	#define CFG_FLASH_CFI_DRIVER
	#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */


	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */

	#define CFG_ENV_IS_IN_FLASH 1
	#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
	#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
	#define CFG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */

	/* Address and size of Redundant Environment Sector */
	#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
	#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)

	#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */

	/*-----------------------------------------------------------------------
	* Cache Configuration
	*/
	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
	#if defined(CONFIG_CMD_KGDB)
	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	#endif

	/*-----------------------------------------------------------------------
	* SYPCR - System Protection Control 11-9
	* SYPCR can only be written once after reset!
	*-----------------------------------------------------------------------
	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	*/
	#define CFG_SYPCR 0xffffff89

	/*-----------------------------------------------------------------------
	* SIUMCR - SIU Module Configuration 11-6
	*-----------------------------------------------------------------------
	*/
	#define CFG_SIUMCR 0x00610480

	/*-----------------------------------------------------------------------
	* TBSCR - Time Base Status and Control 11-26
	*-----------------------------------------------------------------------
	* Clear Reference Interrupt Status, Timebase freezing enabled
	*/
	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)

	/*-----------------------------------------------------------------------
	* PISCR - Periodic Interrupt Status and Control 11-31
	*-----------------------------------------------------------------------
	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	*/
	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)

	/*-----------------------------------------------------------------------
	* SCCR - System Clock and reset Control Register 15-27
	*-----------------------------------------------------------------------
	* Set clock output, timebase and RTC source and divider,
	* power management and some other internal clocks
	*/
	#define SCCR_MASK 0x01800000
	#define CFG_SCCR 0x01800000

	#define CFG_DER 0

	/*
	* Init Memory Controller:
	*
	* BR0/1 and OR0/1 (FLASH)
	*/

	#define FLASH_BASE0_PRELIM 0xf0000000 /* FLASH bank #0 */

	/* used to re-map FLASH both when starting from SRAM or FLASH:
	* restrict access enough to keep SRAM working (if any)
	* but not too much to meddle with FLASH accesses
	*/
	#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
	#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */

	/*
	* FLASH timing: Default value of OR0 after reset
	*/
	#define CFG_OR0_PRELIM 0xfe000954
	#define CFG_BR0_PRELIM 0xf0000401

	/*
	* BR1 and OR1 (SDRAM)
	*
	*/
	#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
	#define SDRAM_MAX_SIZE (64 << 20) /* max 64 MB per bank */

	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
	#define CFG_OR_TIMING_SDRAM 0x00000A00

	#define CFG_OR1_PRELIM 0xfc000800
	#define CFG_BR1_PRELIM (0x000000C0 \| 0x01)

	#define CFG_MPTPR 0x0200
	/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
	1 Write loop Cycle (not used), 1 Timer Loop Cycle */
	#define CFG_MBMR 0x10964111
	#define CFG_MAR 0x00000088

	/*
	* 4096 Rows from SDRAM example configuration
	* 1000 factor s -> ms
	* 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
	* 4 Number of refresh cycles per period
	* 64 Refresh cycle in ms per number of rows
	*/
	#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))

	/* GPIO/PIGGY on CS3 initialization values
	*/
	#define CFG_PIGGY_BASE (0x30000000)
	#define CFG_OR3_PRELIM (0xfe000d24)
	#define CFG_BR3_PRELIM (0x30000401)

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CONFIG_SCC3_ENET
	#define CONFIG_ETHPRIME "SCC ETHERNET"
	#define CONFIG_HAS_ETH0

	/* pass open firmware flat tree */
	#define CONFIG_OF_LIBFDT 1
	#define CONFIG_OF_BOARD_SETUP 1

	#define OF_CPU "PowerPC,866@0"
	#define OF_SOC "soc@fff00000"
	#define OF_TBCLK (bd->bi_busfreq / 4)
	#define OF_STDOUT_PATH "/soc/cpm/serial@a80"

	#endif /* __CONFIG_H */