| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019 Broadcom. |
| */ |
| #include <common.h> |
| #include <asm/gic.h> |
| #include <asm/gic-v3.h> |
| #include <asm/io.h> |
| #include <linux/sizes.h> |
| |
| static u32 lpi_id_bits; |
| |
| #define LPI_NRBITS lpi_id_bits |
| #define LPI_PROPBASE_SZ ALIGN(BIT(LPI_NRBITS), SZ_64K) |
| #define LPI_PENDBASE_SZ ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K) |
| |
| /* |
| * Program the GIC LPI configuration tables for all |
| * the re-distributors and enable the LPI table |
| * base: Configuration table address |
| * num_redist: number of redistributors |
| */ |
| int gic_lpi_tables_init(u64 base, u32 num_redist) |
| { |
| u32 gicd_typer; |
| u64 val; |
| u64 tmp; |
| int i; |
| u64 redist_lpi_base; |
| u64 pend_base = GICR_BASE + GICR_PENDBASER; |
| |
| gicd_typer = readl(GICD_BASE + GICD_TYPER); |
| |
| /* GIC support for Locality specific peripheral interrupts (LPI's) */ |
| if (!(gicd_typer & GICD_TYPER_LPIS)) { |
| pr_err("GIC implementation does not support LPI's\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Check for LPI is disabled for all the redistributors. |
| * Once the LPI table is enabled, can not program the |
| * LPI configuration tables again, unless the GIC is reset. |
| */ |
| for (i = 0; i < num_redist; i++) { |
| u32 offset = i * GIC_REDISTRIBUTOR_OFFSET; |
| |
| if ((readl((uintptr_t)(GICR_BASE + offset))) & |
| GICR_CTLR_ENABLE_LPIS) { |
| pr_err("Re-Distributor %d LPI is already enabled\n", |
| i); |
| return -EINVAL; |
| } |
| } |
| |
| /* lpi_id_bits to get LPI_PENDBASE_SZ and LPi_PROPBASE_SZ */ |
| lpi_id_bits = min_t(u32, GICD_TYPER_ID_BITS(gicd_typer), |
| ITS_MAX_LPI_NRBITS); |
| |
| /* Set PropBase */ |
| val = (base | |
| GICR_PROPBASER_INNERSHAREABLE | |
| GICR_PROPBASER_RAWAWB | |
| ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK)); |
| |
| writeq(val, (GICR_BASE + GICR_PROPBASER)); |
| tmp = readl(GICR_BASE + GICR_PROPBASER); |
| if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) { |
| if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) { |
| val &= ~(GICR_PROPBASER_SHAREABILITY_MASK | |
| GICR_PROPBASER_CACHEABILITY_MASK); |
| val |= GICR_PROPBASER_NC; |
| writeq(val, (GICR_BASE + GICR_PROPBASER)); |
| } |
| } |
| |
| redist_lpi_base = base + LPI_PROPBASE_SZ; |
| |
| for (i = 0; i < num_redist; i++) { |
| u32 offset = i * GIC_REDISTRIBUTOR_OFFSET; |
| |
| val = ((redist_lpi_base + (i * LPI_PENDBASE_SZ)) | |
| GICR_PENDBASER_INNERSHAREABLE | |
| GICR_PENDBASER_RAWAWB); |
| |
| writeq(val, (uintptr_t)(pend_base + offset)); |
| tmp = readq((uintptr_t)(pend_base + offset)); |
| if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) { |
| val &= ~(GICR_PENDBASER_SHAREABILITY_MASK | |
| GICR_PENDBASER_CACHEABILITY_MASK); |
| val |= GICR_PENDBASER_NC; |
| writeq(val, (uintptr_t)(pend_base + offset)); |
| } |
| |
| /* Enable LPI for the redistributor */ |
| writel(GICR_CTLR_ENABLE_LPIS, (uintptr_t)(GICR_BASE + offset)); |
| } |
| |
| return 0; |
| } |
| |